Package: abisip-find Source: osmo-bsc Version: 1.14.0.38.1245.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 148 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/abisip-find_1.14.0.38.1245.202605271800_armhf.deb Size: 58384 MD5sum: d17d243cf2f8c74d72b6f987963e5967 SHA1: b0332cf054c049c800e0c078e457dedf7b319282 SHA256: c9090fde5e72e9046889b49348d21ef267edc3bd6cd9ae0e7097c965b492cee7 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: Command line utility to find ip.access compatible BTS Package: charon-cmd Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 216 Depends: osmocom-nightly (= 202605271800), libstrongswan (= 2:0.1.2.osmo.epdg.0.202605271800), libc6 (>= 2.34), strongswan-libcharon (>= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/charon-cmd_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 79748 MD5sum: 3c631af04ecc611a7fe6eba1589000f1 SHA1: 49e208bc92c78cd6e5c46bb8526ab175f5bb787d SHA256: b1509bd01a641657a4730dd12fbce564ca1751af54f6f3b5a8fab8f80b2c6249 Section: net Priority: optional Homepage: http://www.strongswan.org Description: standalone IPsec client The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the charon-cmd command, which can be used as a client to connect to a remote IKE daemon. Package: charon-cmd-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 110 Depends: charon-cmd (= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/charon-cmd-dbgsym_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 82240 MD5sum: 5a83c1d1d119ab3f21a693223f62c152 SHA1: be4fa7b42ca75e4a98b3c2d467682ed1f4fc049a SHA256: 2b2b501300bcc5826775322a6e0b2509834724947e57ebeb147fca8b2e745384 Section: debug Priority: optional Description: debug symbols for charon-cmd Build-Ids: 9983aa130131d9bb7bc3540dbc8953fc4da8aec5 Package: charon-systemd Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 233 Depends: osmocom-nightly (= 202605271800), libstrongswan (= 2:0.1.2.osmo.epdg.0.202605271800), strongswan-swanctl, libc6 (>= 2.34), libsystemd0, strongswan-libcharon (>= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/charon-systemd_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 77120 MD5sum: dff4172be66c9c24b799378879b519d0 SHA1: 83fb287123578e0aa4f8b7c659e5ed154a6831a8 SHA256: 6ecea463be4415b1b92ef855f211a9c893ab3c42716178c9ca339d4fbcd717ea Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan IPsec client, systemd support The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the charon-systemd files. Package: charon-systemd-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 71 Depends: charon-systemd (= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/charon-systemd-dbgsym_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 51352 MD5sum: d6fa26f4986dcdc8f2ad7653073d2071 SHA1: dbd5f759a4ad932661d2c660a616bfc7b90a6825 SHA256: 9eefb03842130f66d4fc2281a1ea90239a996543efaa04019cd2af3c169b6d68 Section: debug Priority: optional Description: debug symbols for charon-systemd Build-Ids: 80c9e692803d4d4a5b7770d1c3243a9deee6b44c Package: gtp-echo-responder Source: osmo-ggsn Version: 1.14.0.1.2016.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 108 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34) Filename: ./armhf/gtp-echo-responder_1.14.0.1.2016.202605271800_armhf.deb Size: 23444 MD5sum: 4756a28aac582467d8838f8fa093fa4f SHA1: e93f9c0e7c32a121827ec6b4a80032f0a2cd3f55 SHA256: 6064ad06ec7a1c85698d28714123b01d55e8998ebb9dc96f3a6f36c4c5b77ad7 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/openggsn Description: Small program answering GTP ECHO Request with GTP ECHO Response Package: gtp-echo-responder-dbg Source: osmo-ggsn Version: 1.14.0.1.2016.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 16 Depends: osmocom-nightly (= 202605271800), gtp-echo-responder (= 1.14.0.1.2016.202605271800) Filename: ./armhf/gtp-echo-responder-dbg_1.14.0.1.2016.202605271800_armhf.deb Size: 8720 MD5sum: 051f32a08e4b4863bdbf1c4867c32fe5 SHA1: 20fb2ef9ee670e8e81d52bd21ee8847a303f1e0c SHA256: f802b6be98ce57559727708ecae3c604f15a22936791758ba85c20efbf51df2e Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: Debug symbols for gtp-echo-responder Small program answering GTP ECHO Request with GTP ECHO Response. Package: libasn1c-dbg Source: libasn1c Version: 0.9.38.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 300 Depends: osmocom-nightly (= 202605271800), libasn1c1 (= 0.9.38.0.202605271800) Conflicts: osmo-libasn1c-dbg Replaces: osmo-libasn1c-dbg Filename: ./armhf/libasn1c-dbg_0.9.38.0.202605271800_armhf.deb Size: 269252 MD5sum: 0055ed2c9e901113d808335863e3e325 SHA1: ea22a804a80aa5feda2ded0b6cf4e8411288b975 SHA256: 1a15df499ff66f3d1c3556f2a8093e94a13fdf4107dfb2b1641c763b655e26dc Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libasn1c Description: asn1c runtime code as shared library Build-Ids: f98f3252d11cdf2ca1735679c13f2ef281dba819 Package: libasn1c-dev Source: libasn1c Version: 0.9.38.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 406 Depends: osmocom-nightly (= 202605271800), libasn1c1 (= 0.9.38.0.202605271800) Conflicts: osmo-libasn1c-dev Replaces: osmo-libasn1c-dev Filename: ./armhf/libasn1c-dev_0.9.38.0.202605271800_armhf.deb Size: 95884 MD5sum: f62284f01d77c590f8458183d3bcd8c5 SHA1: 81343abce1506d01d44b2f16ae96a158eb871400 SHA256: 913f28017cf8c3d8e2a92ed2363534db20f38b5f4408e25eba2bcb80ecd94f01 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libasn1c Description: asn1c runtime code as shared library Package: libasn1c1 Source: libasn1c Version: 0.9.38.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 213 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libtalloc2 (>= 2.0.4~git20101213) Conflicts: osmo-libasn1c1 Replaces: osmo-libasn1c1 Filename: ./armhf/libasn1c1_0.9.38.0.202605271800_armhf.deb Size: 63616 MD5sum: d4423c618f384ccf300838cd70b360cc SHA1: b528b2fe066ce8754cf9c5dcc6529b49b5a3da71 SHA256: 21573f4e9e4da5b556b39b62e469955b283f6fcbaa429b2624fc64417ecc707c Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libasn1c Description: asn1c runtime code as shared library Package: libcharon-extauth-plugins Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 288 Depends: osmocom-nightly (= 202605271800), libstrongswan (= 2:0.1.2.osmo.epdg.0.202605271800), libc6 (>= 2.25) Breaks: libcharon-extra-plugins (<< 5.8.0-2~) Replaces: libcharon-extra-plugins (<< 5.8.0-2~) Filename: ./armhf/libcharon-extauth-plugins_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 81396 MD5sum: befc484914ae457af0f319bc0f9d6902 SHA1: f751e4b06698325ef0bcce0df25a6ebff7803de9 SHA256: 7db25a9e974787974e6017dc57162a502167f1389fa2aceab10b0da7b8d17204 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan charon library (extended authentication plugins) The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides extended authentication plugins for the charon library: - eap-mschapv2 (EAP-MSCHAPv2 protocol handler using passwords/NT hashes) Used for client side to connect to some VPN concentrators configured for Windows 7+ and modern OSX/iOS using IKEv2 (identify with public key, authenticate with MSCHAPv2). - xauth-generic (Generic XAuth backend that provides passwords from ipsec.secrets and other credential sets) Used for the client side to connect to VPN concentrators configured for Android and older OSX/iOS using IKEv1 and XAUTH (identify with public key, authenticate with XAUTH password). . These are the "not always, but still more commonly used" plugins, for further needs even more plugins can be found in the package libcharon-extra-plugins. Package: libcharon-extauth-plugins-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 123 Depends: libcharon-extauth-plugins (= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/libcharon-extauth-plugins-dbgsym_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 103012 MD5sum: 53b6775daa1a56cf6e0ccc0126ec52d4 SHA1: 8ac2377eddfe7ab508aadfaf434a035ffedf49b4 SHA256: e23acdd5fb62a200db11272fd5595e0d70d99045c6435f8c3d86b30714bda547 Section: debug Priority: optional Description: debug symbols for libcharon-extauth-plugins Build-Ids: 41fd98995b773fc1866903f64dc3f288f2cfaf2f ce19d6e55c4d67a72d5a7b0e948d13188e593109 Package: libcharon-extra-plugins Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2620 Depends: osmocom-nightly (= 202605271800), libstrongswan (= 2:0.1.2.osmo.epdg.0.202605271800), libc6 (>= 2.34), libgmp10 (>= 2:6.3.0+dfsg), libip4tc2 (>= 1.8.3), libosmogsm20, libpam0g (>= 0.99.7.1) Filename: ./armhf/libcharon-extra-plugins_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 258804 MD5sum: db2b9042618dd51f5cefab22f889aa6c SHA1: ee2a284bb50f97dc1bc7336bf68a029681fca265 SHA256: 04ef65ece7c2833d4163297c76328779d29a8621fe44fdeb90036c8036b6b567 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan charon library (extra plugins) The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides extra plugins for the charon library: - addrblock (Narrow traffic selectors to RFC 3779 address blocks in X.509 certificates) - certexpire (Export expiration dates of used certificates) - eap-aka (Generic EAP-AKA protocol handler using different backends) - eap-gtc (EAP-GTC protocol handler authenticating with XAuth backends) - eap-identity (EAP-Identity identity exchange algorithm, to use with other EAP protocols) - eap-md5 (EAP-MD5 protocol handler using passwords) - eap-radius (EAP server proxy plugin forwarding EAP conversations to a RADIUS server) - eap-tls (EAP-TLS protocol handler, to authenticate with certificates in EAP) - eap-tnc (EAP-TNC protocol handler, Trusted Network Connect in a TLS tunnel) - eap-ttls (EAP-TTLS protocol handler, wraps other EAP methods securely) - error-notify (Notification about errors via UNIX socket) - ha (High-Availability clustering) - kernel-libipsec (Userspace IPsec Backend with TUN devices) - led (Let Linux LED subsystem LEDs blink on IKE activity) - lookip (Virtual IP lookup facility using a UNIX socket) - tnc (Trusted Network Connect) - unity (Cisco Unity extensions for IKEv1) - xauth-eap (XAuth backend that uses EAP methods to verify passwords) - xauth-pam (XAuth backend that uses PAM modules to verify passwords) Package: libcharon-extra-plugins-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 1947 Depends: libcharon-extra-plugins (= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/libcharon-extra-plugins-dbgsym_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 1709728 MD5sum: 375bb0c841c55ac8bdf3f8da86ed90e0 SHA1: 75d38284b99229376c866ec405fa9af27eb1c45c SHA256: 7389a0fd6661597e4ca261568097fb2582c2ad2ded9115c64921840f388bee4c Section: debug Priority: optional Description: debug symbols for libcharon-extra-plugins Build-Ids: 1190e34e0bc00e9c0883170b1dad531665f575b6 1db06feb3bd91b49af4d848d37a254fb42842afa 2714772c2d8c91a5dd88a15793b712ceafc3d9d5 2bfa0a92e168cef2b20e7799c730181a84f761dd 31bdc59a54d780918d8568bd94e7bee7fb6b5fdc 3f76084bcdb348af9cbb9382855f252728cd5b94 4880b3dfbb0549afe66c5e382bb3a0baa7b534bd 5b7b1675cd910449773d27d36f93ced56426bde3 627a198c02db815b01218cce87d03f2177c94325 64cba04b17dd94c382d309f16a38488a37cdaff0 6b2ad8347ab6cd9d773568d1200bbcfdf772ffdc 6b48ca271f94aac0ed75fcfca56aca15c4ee76b6 6e13b8cd1858691e81dd47b97c557be35a0f34b3 71a9eb1f835accdd7f93d17681c0cc66e740e9c7 753b758ff1d9291a4d25399792be461b7755c3fd 7dd6c24bcc4c650b94eaf5054da5b1cbec5d48db 852b36db64c8cbf603a329772f216a5944f523a4 8555874472569082926337b3316e4be949678b47 946910cba2690927236d190b38eff73db0f2e1a4 984d3d42eb8ec1cbb9138761678d79e0b7c6734c a5663b73491b28d6f1182f236a54a1140a7ea5cf ad7c79dc5b71ca0f540efd749ce06505abc9cb1f bcd755ac9e52e3a64e0d0ea368efc0f6caf466d6 bf2ec569144489d6bcb53668f1e364efec6f4c07 c3ca66ad1d0f0f2eb199e2767f1da06bda22b7a5 c76b881aaff9699b0d1e2c6c9fa8a7e8184d3862 cb68666e3167904f929f63e36d7a1c97969d93c6 d9a8e57eaefdfad9c8a1faab3f1ae0be0f0f7370 e3f679ec35624684e0899832a5a9983c37906f6b e6eea040c55e678a4366d0ae03ebe6cfaaf0e6c6 ebec1480664ea359617b7db0faeb0aafc9c8e7c7 ec4760c8b0e7274c099bf031410ceff6d4db1582 ee6f41bc200ab92f46e2b415b7b667c5ce8a2b28 f59b1a1583156a842e2330f6d093b8dbc80429be fbe5f6e8c6b92c8ccd8ebea9d4f916f6ac544c76 Package: libgtp-dbg Source: osmo-ggsn Version: 1.14.0.1.2016.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 152 Depends: osmocom-nightly (= 202605271800), libgtp11 (= 1.14.0.1.2016.202605271800) Filename: ./armhf/libgtp-dbg_1.14.0.1.2016.202605271800_armhf.deb Size: 133496 MD5sum: 2c7dbf55e97c9e0b37a68df62beaba31 SHA1: 8c21330ad4024f133943dd94dbe15241aff89377 SHA256: 1360d8e7eec84a3819b7bb95d61bbb45f736c7de316034151858b9c3abade31d Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: Debug symbols for OsmoGGSN OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. . The library libgtp implements the GTP protocol between SGSN and GGSN and this package contains the development files for this library. Build-Ids: 17a82fa591bde7016248e5a00df5aac64b4c9a98 Package: libgtp-dev Source: osmo-ggsn Version: 1.14.0.1.2016.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 554 Depends: osmocom-nightly (= 202605271800), libgtp11 (= 1.14.0.1.2016.202605271800) Filename: ./armhf/libgtp-dev_1.14.0.1.2016.202605271800_armhf.deb Size: 170508 MD5sum: 0bd03e50c511ff3eee7cabff04f56512 SHA1: 53b6860efd5af29b869f7e8e1b419f72d04f4edd SHA256: df9badee538396c1559178eb79e1e5675afef3f96649a9222e99a40e1f84a769 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: Development files for libgtp OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. . The library libgtp implements the GTP protocol between SGSN and GGSN and this package contains the development files for this library. Package: libgtp11 Source: osmo-ggsn Version: 1.14.0.1.2016.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 151 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.38), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libgtp11_1.14.0.1.2016.202605271800_armhf.deb Size: 42968 MD5sum: eb2bdb0529e178af8b44ea0d8cf985c2 SHA1: 50f41b97b4508f2eb3f7d9b63f946e1d3b38a7ce SHA256: 8cf7b63740881196b4f24eaca6e686d1d8642c8b837fe519b97675cea42cc449 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: library implementing the GTP protocol between SGSN and GGSN OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. . This library is part of OsmoGGSN and implements the GTP protocol between SGSN (Serving GPRS support node) and GGSN. Package: libgtpnl-dbg Source: libgtpnl Version: 1.3.3.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 77 Depends: osmocom-nightly (= 202605271800), libgtpnl0 (= 1.3.3.0.202605271800) Filename: ./armhf/libgtpnl-dbg_1.3.3.0.202605271800_armhf.deb Size: 41612 MD5sum: 55887bfaf75d36e0c2b5d46dc7ebb938 SHA1: 0668f6c91b78035ae66e9e8909cb7c591fdad000 SHA256: d204feb9515b4a977218d8a2cca9f62411e86dada20effc739aa5dd760c512f0 Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/linux-kernel-gtp-u/wiki/Libgtpnl Description: Debug symbols for Linux kernel GTP-U netlink library Build-Ids: 883a8a18d77dd870d6813dc16e31a66b585b0473 a03c321deec390be5cf7dfd7987887f82427c87a ac4c200c80de79040791d75aa7bc46a43409d9fd Package: libgtpnl-dev Source: libgtpnl Version: 1.3.3.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 21 Depends: osmocom-nightly (= 202605271800), libmnl-dev, libgtpnl0 (= 1.3.3.0.202605271800) Filename: ./armhf/libgtpnl-dev_1.3.3.0.202605271800_armhf.deb Size: 4464 MD5sum: ea05e2e52f5ecc6c2e7d32af821aff97 SHA1: bc1eb0e7a9d8f91b28c5d32693b2bde029ea511d SHA256: dec18d1c6b330905e76cfad5ea130d7c0ebedf5c31ff5ea560de12f541d69732 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://osmocom.org/projects/linux-kernel-gtp-u/wiki/Libgtpnl Description: Development headers for Linux kernel GTP-U netlink library The header files provided by this package may be used to develop applications against the libgtpnl library. Package: libgtpnl-tools Source: libgtpnl Version: 1.3.3.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 141 Depends: osmocom-nightly (= 202605271800), libgtpnl0 (= 1.3.3.0.202605271800) Filename: ./armhf/libgtpnl-tools_1.3.3.0.202605271800_armhf.deb Size: 7556 MD5sum: 3042d85c65f19fea96ae685033519ad8 SHA1: 4cea9482e21f046f6cce4bc3de989462e4f8c933 SHA256: 7bfbaff97f20c15626e34ea94df691225bb306b2c215e596ef6f5d649e9da6d5 Section: net Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/linux-kernel-gtp-u/wiki/Libgtpnl Description: Tools to manage gtp interfaces and tunnels. Package: libgtpnl0 Source: libgtpnl Version: 1.3.3.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 79 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~) Filename: ./armhf/libgtpnl0_1.3.3.0.202605271800_armhf.deb Size: 7972 MD5sum: 115864754a772964db5fe3e5f0b9df1b SHA1: 3a01cc876d7fc8cdfdcfad9a4e2828a5eb2700fa SHA256: 84fa2445672691faf0eda4de16bfac403412eaea694cdfbab146878ab9a5ca1a Section: libs Priority: optional Multi-Arch: same Homepage: https://osmocom.org/projects/linux-kernel-gtp-u/wiki/Libgtpnl Description: Linux kernel GTP-U netlink library Package: libifd-osmo-remsim-client0 Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 152 Depends: osmocom-nightly (= 202605271800), pcscd, libc6 (>= 2.34), libosmo-rspro2, libosmocore22, libosmogsm20, libosmonetif11, libtalloc2 (>= 2.0.4~git20101213) Suggests: pcsc-tools Provides: pcsc-ifd-handler Filename: ./armhf/libifd-osmo-remsim-client0_1.1.3.15.201a.202605271800_armhf.deb Size: 36764 MD5sum: cb16b45d51c8361a3de1dbe97c149c3d SHA1: a34d8b4c579610cfed9f2cfefc0de6b2a8be90ac SHA256: f13e44019f15f5da78016606219e5d67af27dd53348d19cc26fc67186f881aa3 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM Client - PC/SC driver This is an incarnation of osmo-remsim-client which can plug as ifd_handler driver into pcscd. This means you can use remote smart cards managed by osmo-remsim-server via normal PC/SC applications. Package: libifd-osmo-remsim-client0-dbgsym Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 86 Depends: libifd-osmo-remsim-client0 (= 1.1.3.15.201a.202605271800) Filename: ./armhf/libifd-osmo-remsim-client0-dbgsym_1.1.3.15.201a.202605271800_armhf.deb Size: 67428 MD5sum: 8b15d239cf5cdc07b433a465002fc578 SHA1: ecd3794db232bdea2fe74c4f20cb8ff6300ab319 SHA256: b8d42799033736159c2b49f7686b830a4c987b4df03d2e0865ce222eb7cb3acf Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libifd-osmo-remsim-client0 Build-Ids: e5d22441c17930dfe8c44ee51870189c4c3222a9 Package: libosmo-abis Version: 2.1.0.13.898f6.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 18 Depends: osmocom-nightly (= 202605271800), libosmoabis15 (= 2.1.0.13.898f6.202605271800), libosmotrau11 (= 2.1.0.13.898f6.202605271800) Filename: ./armhf/libosmo-abis_2.1.0.13.898f6.202605271800_armhf.deb Size: 10324 MD5sum: 64aa59a169ef88fb1d8633aec7e14de2 SHA1: 644e34c72113acdda4541b354539c5f41679b8fc SHA256: 7222677bc5b79ea4cf527dc88e5e4be7923fcd2eae4310cf8d0c710cda03377d Section: oldlibs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: Legacy package for libosmo-abis libosmo-abis is an empty package helping in the transition to one package per DSO. Package: libosmo-abis-dbg Source: libosmo-abis Version: 2.1.0.13.898f6.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 398 Depends: osmocom-nightly (= 202605271800), libosmoabis15 (= 2.1.0.13.898f6.202605271800), libosmotrau11 (= 2.1.0.13.898f6.202605271800) Filename: ./armhf/libosmo-abis-dbg_2.1.0.13.898f6.202605271800_armhf.deb Size: 360868 MD5sum: c3969f3b021194f78e94935624d599df SHA1: 2383ce67bf4ec83dbac2f82c81a0c38a999780b5 SHA256: c0171a09397d5f0b8ea6fb3129b90de8b1a5e84412702b62fca91b85fc5e57e3 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: Debug symbols for A-bis interface The libosmo-abis library contains common/shared code regarding the A-bis interface between GSM BTS and BSC. This package in particular contains the debug symbols for the two libraries libosmoabis and libosmotrau. Build-Ids: 0ae8cc11c691cbf4c0db2e6e27a784302ced90a0 2de0bab0396d275e985eef635fd7c66ac71a1517 Package: libosmo-abis-dev Source: libosmo-abis Version: 2.1.0.13.898f6.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 480 Depends: osmocom-nightly (= 202605271800), libosmotrau11 (= 2.1.0.13.898f6.202605271800), libosmoabis15 (= 2.1.0.13.898f6.202605271800), libosmo-netif-dev (>= 1.7.0), libosmocore-dev (>= 1.12.0) Filename: ./armhf/libosmo-abis-dev_2.1.0.13.898f6.202605271800_armhf.deb Size: 127932 MD5sum: 3148ee7685b53fda8e4ffb1e3e8980fd SHA1: e84a80013939848270cf652fb6467893770e98db SHA256: 088d7e28b49940dd8d5b632415fde750a7755c2a47f5919e6fbbfc4625701f09 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: Development headers for A-bis interface The libosmo-abis library contains common/shared code regarding the A-bis interface between GSM BTS and BSC. This package in particular contains the development files needed to develop with the libosmoabis and libosmotrau libraries. Package: libosmo-asn1-tcap-dbg Source: libosmo-asn1-tcap Version: 0.2.1.11.3cb8.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 212 Depends: osmocom-nightly (= 202605271800), libosmo-asn1-tcap1 (= 0.2.1.11.3cb8.202605271800) Filename: ./armhf/libosmo-asn1-tcap-dbg_0.2.1.11.3cb8.202605271800_armhf.deb Size: 181904 MD5sum: 1d903dfc67d57a8ef1aba9574f0a7e3e SHA1: 12a393ec77693a250c79539a802149731c7f05aa SHA256: a919d1204eb5514534afc760d0a4a0cc302fd137507762d48fce17ac648aa93e Section: debug Priority: extra Multi-Arch: same Homepage: https://gitea.osmocom.org/ss7-in-c/libosmo-asn1-tcap Description: Debug symbols for utility library for ASN.1 of TCAP (SS7) Build-Ids: 6355a0e2843e4091ae5de3043267abbe97f6ed54 Package: libosmo-asn1-tcap-dev Source: libosmo-asn1-tcap Version: 0.2.1.11.3cb8.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 410 Depends: osmocom-nightly (= 202605271800), libosmo-asn1-tcap1 (= 0.2.1.11.3cb8.202605271800), libtalloc-dev (>= 2.1.0) Filename: ./armhf/libosmo-asn1-tcap-dev_0.2.1.11.3cb8.202605271800_armhf.deb Size: 69572 MD5sum: ebcd820d5b3ae048d0ce5e12212555be SHA1: 3f180eccbb8c39dd59c75af7f79dab3f159afe6d SHA256: 0e6b09d2856018723f6ec6ea0d26049e8f11eafe5ca73d6932e4308c9ac11680 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://gitea.osmocom.org/ss7-in-c/libosmo-asn1-tcap Description: Development headers for utility library for ASN.1 of TCAP (SS7) Package: libosmo-asn1-tcap1 Source: libosmo-asn1-tcap Version: 0.2.1.11.3cb8.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 150 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmo-asn1-tcap1_0.2.1.11.3cb8.202605271800_armhf.deb Size: 31080 MD5sum: 088bc90c9227f1a2e90dc7348d51eafb SHA1: b86e3d4b475d2e438ba5023f707885c32ee5431f SHA256: d3eefcdaf6f51bc86ff6c1f3e744a768f754d34879b9a3b3645292712337a570 Section: libs Priority: optional Multi-Arch: same Homepage: https://gitea.osmocom.org/ss7-in-c/libosmo-asn1-tcap Description: Utility library for ASN.1 of TCAP (SS7) Package: libosmo-csn1-1 Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmocore22 Filename: ./armhf/libosmo-csn1-1_0.2.1.0.202605271800_armhf.deb Size: 25296 MD5sum: c41cfc749247d40df91417ee94827246 SHA1: 36cd3f706bd5e4a8ec78488424487c3cff439c5f SHA256: b46f3b7727a094919f2f3df4e7bc22f1ee208599dcaf7973aad601d7eaee4c0d Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom CSN.1 codec library and message definition helpers This is a shared library containing the CSN.1 (Concrete Syntax Notation 1) codec and API for message definition. The implementation is based on the original code by Vincent Helfre and Jari Sassi. Package: libosmo-csn1-1-dbgsym Source: libosmo-gprs Version: 0.2.1.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 51 Depends: libosmo-csn1-1 (= 0.2.1.0.202605271800) Filename: ./armhf/libosmo-csn1-1-dbgsym_0.2.1.0.202605271800_armhf.deb Size: 38620 MD5sum: 5087d3d79b1d4c3d34b7e733b46b00bd SHA1: b4b6c4e49213e3028e5050799d87e2c5a54c71d1 SHA256: ea86f36c111416eb97842e45c227bba105f6093d00d8d0be8b20ca1760892649 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-csn1-1 Build-Ids: a328394650094e74aa7e9474ec039a257bfd26be Package: libosmo-csn1-dbg Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202605271800), libosmo-csn1-1 (= 0.2.1.0.202605271800) Filename: ./armhf/libosmo-csn1-dbg_0.2.1.0.202605271800_armhf.deb Size: 9724 MD5sum: 1050514cfd630fa414c3c5f3dfc190c9 SHA1: de4f7d23f3fb67f3b699a5aae611618e6a801e8a SHA256: 3eb48080fe95aac7d5dd1bb905dc98fd83218be14c3dc79a4083b7d7070d826d Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for the Osmocom CSN.1 codec library Package: libosmo-csn1-dev Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 101 Depends: osmocom-nightly (= 202605271800), libosmo-csn1-1 (= 0.2.1.0.202605271800), libosmocore-dev Filename: ./armhf/libosmo-csn1-dev_0.2.1.0.202605271800_armhf.deb Size: 30616 MD5sum: ba7f10e4179d478407b5c583a83b1480 SHA1: fa4d055ad14faf43f7ccf845492f8c2c6e8ce380 SHA256: 01eeb4b9649b72d89a855f6eba7296f7dabe3d6e6e14936923a28076bcc83752 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for the Osmocom CSN.1 codec Package: libosmo-e1d-dev Source: osmo-e1d Version: 0.7.2.2.1097.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 54 Depends: osmocom-nightly (= 202605271800), libosmo-e1d3 (= 0.7.2.2.1097.202605271800), libosmocore-dev Filename: ./armhf/libosmo-e1d-dev_0.7.2.2.1097.202605271800_armhf.deb Size: 15928 MD5sum: 16529df35b3b7479fa55bdd0cb517a5c SHA1: e9f7f57dd8901acc9ccf041b50feb8210f9e1cf6 SHA256: 46b266933f89a8a1aaa6ff547f49327a0086190fa163e3869403e10cd87bc780 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: Development headers for the osmo-e1d library. Package: libosmo-e1d3 Source: osmo-e1d Version: 0.7.2.2.1097.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 85 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-e1d3_0.7.2.2.1097.202605271800_armhf.deb Size: 13476 MD5sum: 09c5e73f7904e0b5297cd2839e511974 SHA1: b8a97e17da8932f36e1b12166e53af81cf3c4d45 SHA256: b69dc38c84fd7634d12fd45afdaa930f35b1aad3c74fc5c35625c94bda2b1154 Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: Client library for talking to the Osmocom E1 interface daemon osmo-e1d. Package: libosmo-e1d3-dbgsym Source: osmo-e1d Version: 0.7.2.2.1097.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 40 Depends: libosmo-e1d3 (= 0.7.2.2.1097.202605271800) Filename: ./armhf/libosmo-e1d3-dbgsym_0.7.2.2.1097.202605271800_armhf.deb Size: 26260 MD5sum: 5b0b1a3177e80e3147b45cc430396bff SHA1: 03d60f923fc7ce68051a9374caced55ca78b5254 SHA256: b186b2bffda89916ff6e0140b61c636d2c5ef8a6a1306242498c89f542aa3ee8 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-e1d3 Build-Ids: 9cf968cac12a146e00fd031c4dc3f20f915254ef Package: libosmo-fl2k-dev Source: osmo-fl2k Version: 0.2.1.1.3706.202605271800 Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 40 Depends: osmocom-nightly (= 202605271800), libosmo-fl2k0 (= 0.2.1.1.3706.202605271800) Filename: ./armhf/libosmo-fl2k-dev_0.2.1.1.3706.202605271800_armhf.deb Size: 10732 MD5sum: 532d25220ecaa8a2e4faeadbb276be03 SHA1: 7b5a4f64e2569901078d2a229acee50e0d572856 SHA256: 4cc27de4e2ffbdab148dabdf0efff419fdf03833646ac4fb7f73d5befa084375 Section: libdevel Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-fl2k Description: use a VGA USB adapter as DAC and SDR transmitter - development This software allows one to use USB 3.0 to VGA adapters based on the Fresco Logic FL2000 chip as general purpose DACs and SDR transmitter generating a continuous stream of samples by avoiding the HSYNC and VSYNC blanking intervals. . This package provides the development files. Package: libosmo-fl2k0 Source: osmo-fl2k Version: 0.2.1.1.3706.202605271800 Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 84 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libusb-1.0-0 (>= 2:1.0.22) Filename: ./armhf/libosmo-fl2k0_0.2.1.1.3706.202605271800_armhf.deb Size: 9916 MD5sum: 60233382ab07cb0f061a71cf4ac4116e SHA1: 721ece7daba548969d1359824670afede2f77114 SHA256: dd277da9d7770fd50ac00e7ea03f9ac4b5f0dfa662afac356fb1e76781e19fa5 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-fl2k Description: use a VGA USB adapter as DAC and SDR transmitter - library This software allows one to use USB 3.0 to VGA adapters based on the Fresco Logic FL2000 chip as general purpose DACs and SDR transmitter generating a continuous stream of samples by avoiding the HSYNC and VSYNC blanking intervals. . This package provides the shared library. Package: libosmo-fl2k0-dbgsym Source: osmo-fl2k Version: 0.2.1.1.3706.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 34 Depends: libosmo-fl2k0 (= 0.2.1.1.3706.202605271800) Filename: ./armhf/libosmo-fl2k0-dbgsym_0.2.1.1.3706.202605271800_armhf.deb Size: 20352 MD5sum: f6d9c131188a9b43bb14584531dd185f SHA1: 0ed60107d3aa7705717da4bddc341c8dcf12cac0 SHA256: 08fec154de551eda9373f27ee417fced0789640dc98fb0220b823a28908993b9 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-fl2k0 Build-Ids: 0c3725533f83caaecfc2dbe77d3a21456f9def3b Package: libosmo-gprs-gmm-dbg Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202605271800), libosmo-gprs-gmm1 (= 0.2.1.0.202605271800) Filename: ./armhf/libosmo-gprs-gmm-dbg_0.2.1.0.202605271800_armhf.deb Size: 9708 MD5sum: c6534d187eeb049476382ad29fba3bbf SHA1: 8c81c4a06c4b5d52a4ba173bb780e9a88a683286 SHA256: bf1e149b578d5ace142ecdccd578833ad600635d3085244848bb2efa398f57d8 Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-gmm Package: libosmo-gprs-gmm-dev Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 115 Depends: osmocom-nightly (= 202605271800), libosmo-gprs-gmm1 (= 0.2.1.0.202605271800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-gmm-dev_0.2.1.0.202605271800_armhf.deb Size: 32256 MD5sum: 027499a242fd46f750d97a81111a21fe SHA1: 2af10ba49ab00ab1ef33ac5de816a0b01cf6b72c SHA256: 94d3bac9ddf504e056a9e7650e6e783e4b06ca4df12404cf03d92dcca0a32dd7 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-gmm Package: libosmo-gprs-gmm1 Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 89 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmo-gprs-llc1, libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-gmm1_0.2.1.0.202605271800_armhf.deb Size: 28468 MD5sum: ccb029da7f21ddcb29d337c1d816eee7 SHA1: f4731677c10d4526bd91c435e319549c878ca0a4 SHA256: 2419a0d2d3385894abf8edd185bc2b2f428abd52f6c895222042a571c4b9b188 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom GMM (GPRS Mobility Management) layer for GPRS and EGPRS Package: libosmo-gprs-gmm1-dbgsym Source: libosmo-gprs Version: 0.2.1.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 105 Depends: libosmo-gprs-gmm1 (= 0.2.1.0.202605271800) Filename: ./armhf/libosmo-gprs-gmm1-dbgsym_0.2.1.0.202605271800_armhf.deb Size: 87312 MD5sum: 3dffdddf4a4e65449100c1f27b61e5ae SHA1: 31106d5d2c32ccf953363f3120d4e18a65ffe564 SHA256: ea41dd59a93b0bf44e764da907b806fbea6da70b55d3dd7b41d12d8aaf35766d Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-gmm1 Build-Ids: 0be121575b375e75f97f3f6fb2a87e7a28328912 Package: libosmo-gprs-llc-dbg Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202605271800), libosmo-gprs-llc1 (= 0.2.1.0.202605271800) Filename: ./armhf/libosmo-gprs-llc-dbg_0.2.1.0.202605271800_armhf.deb Size: 9712 MD5sum: f89bfd57804081e13f28a7e83a675980 SHA1: 2087ed31e2efee82eeb39d7e35e29e8c6673886e SHA256: 2ad31b049f508b2c8a91f6db8ea368d52e202975d43dc25b63ba5b4823d1f3b5 Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-llc Package: libosmo-gprs-llc-dev Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 109 Depends: osmocom-nightly (= 202605271800), libosmo-gprs-llc1 (= 0.2.1.0.202605271800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-llc-dev_0.2.1.0.202605271800_armhf.deb Size: 33188 MD5sum: 0bb938de4b32c6d813b545e8805fa32e SHA1: 84c881773992c2cd036cbfa04737b0446eef3233 SHA256: ddc92c1f0ad271caba2d1275d1739502314f67777ef6f8dbd58ecefc94be0988 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-llc Package: libosmo-gprs-llc1 Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-llc1_0.2.1.0.202605271800_armhf.deb Size: 29632 MD5sum: 6accfae4dadc4f9c442c357a3a3cd92f SHA1: 22b8506be4a8a34c9534c043eab4bb0542e64f2a SHA256: 1e6244055f20e8e4e8480ba4234ad5141359f8ada2c3087ea405952a1bb14eac Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom LLC (Logical Link Control) layer for GPRS and EGPRS Package: libosmo-gprs-llc1-dbgsym Source: libosmo-gprs Version: 0.2.1.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 94 Depends: libosmo-gprs-llc1 (= 0.2.1.0.202605271800) Filename: ./armhf/libosmo-gprs-llc1-dbgsym_0.2.1.0.202605271800_armhf.deb Size: 78580 MD5sum: 14bf101dcbe41eb0757db0b7de296ce8 SHA1: 468ca3408eec9bcd1d70b60b81ba1c4dd98baac9 SHA256: cfa64a2f875b043aca05f2d660e4e7b199bfbdd5265612b8c78277272ff3941a Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-llc1 Build-Ids: cf0efe507c4df4c85cb1dd2c60959b4ec9365a49 Package: libosmo-gprs-rlcmac-dbg Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202605271800), libosmo-gprs-rlcmac1 (= 0.2.1.0.202605271800) Filename: ./armhf/libosmo-gprs-rlcmac-dbg_0.2.1.0.202605271800_armhf.deb Size: 9708 MD5sum: 5f336ac63dc830da5489f43beedc71d7 SHA1: 379aca9649c8d747ae18d1f622ad940a2bd0b4fb SHA256: 9f624540bff62e7a36e1be929cc0ed93e3a8f555f6a73af56c49a611c5e5ccbd Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-rlcmac Package: libosmo-gprs-rlcmac-dev Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 521 Depends: osmocom-nightly (= 202605271800), libosmo-gprs-rlcmac1 (= 0.2.1.0.202605271800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-rlcmac-dev_0.2.1.0.202605271800_armhf.deb Size: 108080 MD5sum: 618514caf67395ff0f4be41b1aac80f4 SHA1: b723fdad98fd3ec5888e38cf9d97a42a08579e3e SHA256: 411d86564bcda743f351862951a6f24a499bb7a8191b946794f6ba672af546a6 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-rlcmac Package: libosmo-gprs-rlcmac1 Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 281 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmo-csn1-1, libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-rlcmac1_0.2.1.0.202605271800_armhf.deb Size: 76696 MD5sum: ec42f65fc4412c0baaa584b5a5737075 SHA1: 427fde6e9c73a6c86510255574a22394b501c8fe SHA256: 748502fdccc41a85fc8965cfc25da857f118f499a714acb49cf0550c71e37f7c Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom RLC/MAC codec and message definitions for GPRS and EGPRS Package: libosmo-gprs-rlcmac1-dbgsym Source: libosmo-gprs Version: 0.2.1.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 557 Depends: libosmo-gprs-rlcmac1 (= 0.2.1.0.202605271800) Filename: ./armhf/libosmo-gprs-rlcmac1-dbgsym_0.2.1.0.202605271800_armhf.deb Size: 521700 MD5sum: 6324ebd70767f89f14bf3ae4f6f39bf9 SHA1: 3907a349b65d0d61742ba8401cc245490a2b9f65 SHA256: 7bb640d52cbe0d77b711b1aafdd02f7e44daa11d12f1a276a7cacad3867583f4 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-rlcmac1 Build-Ids: 1ae9b9ff406010681597a531d1ce9f392703c131 Package: libosmo-gprs-sm-dbg Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202605271800), libosmo-gprs-sm1 (= 0.2.1.0.202605271800) Filename: ./armhf/libosmo-gprs-sm-dbg_0.2.1.0.202605271800_armhf.deb Size: 9704 MD5sum: a7b06ceeb885bd269d5186ae34978821 SHA1: ae8728fb059cf19720bf96e2f3f4cc914026820b SHA256: 516dfdc657ac31c1a8bf799d4986776c09bf9dc9e03acefc3a0c1b2857b4643a Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-sm Package: libosmo-gprs-sm-dev Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 85 Depends: osmocom-nightly (= 202605271800), libosmo-gprs-sm1 (= 0.2.1.0.202605271800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-sm-dev_0.2.1.0.202605271800_armhf.deb Size: 26052 MD5sum: a11c2774cbd5e3e91007a2f53114576c SHA1: 58cc9c2adfbfc911cd8499889d48b702cb66ebb2 SHA256: b24f42440855d33669e9344bbadf141a3e30fa48c0d2abbdac7c4bc15689cb00 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-sm Package: libosmo-gprs-sm1 Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmo-gprs-gmm1, libosmo-gprs-sndcp1, libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-sm1_0.2.1.0.202605271800_armhf.deb Size: 22004 MD5sum: c6986f901b2100d70fee9442d3040294 SHA1: 84e79ed6ec5cc6075acc1392cf7f68c7424ead17 SHA256: 5444dc0800d33f15e4cbe5f703765754366ff682ba277dd2113860a14babdb90 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom SM (Session Management) layer for GPRS and EGPRS Package: libosmo-gprs-sm1-dbgsym Source: libosmo-gprs Version: 0.2.1.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 77 Depends: libosmo-gprs-sm1 (= 0.2.1.0.202605271800) Filename: ./armhf/libosmo-gprs-sm1-dbgsym_0.2.1.0.202605271800_armhf.deb Size: 61740 MD5sum: 44c7f41db91e8bf2aa8d9279627d251d SHA1: 495b8c0119eaf0eaecbb2237f81069ee0108c6c7 SHA256: aa5568e24646a2a5e0c7914e57bca7a611096cf2f8381af8d16fd76d127bc3c1 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-sm1 Build-Ids: 0aa964334e65b66018a95171fdd30d36a3cef435 Package: libosmo-gprs-sndcp-dbg Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202605271800), libosmo-gprs-sndcp1 (= 0.2.1.0.202605271800) Filename: ./armhf/libosmo-gprs-sndcp-dbg_0.2.1.0.202605271800_armhf.deb Size: 9712 MD5sum: 7590a865707e48ad924323a61db8fa19 SHA1: b4e89ed9c4e7ba04da3f84b92741fcbf9082d828 SHA256: 0308e27eb2964bfdc2145c2bad2496e2a3fb613d7e6df4d0a0ee8cbab80819ad Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-sndcp Package: libosmo-gprs-sndcp-dev Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 146 Depends: osmocom-nightly (= 202605271800), libosmo-gprs-sndcp1 (= 0.2.1.0.202605271800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-sndcp-dev_0.2.1.0.202605271800_armhf.deb Size: 45520 MD5sum: d70c16897151ee30a64f89df5ee0ffd6 SHA1: 3070db1295c041ffac5043f8275e538564ed769b SHA256: 57b806283c5c3c517dec6b6565074f18e973772f07821818b577434ce90e07bc Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-sndcp Package: libosmo-gprs-sndcp1 Source: libosmo-gprs Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 152 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-sndcp1_0.2.1.0.202605271800_armhf.deb Size: 42308 MD5sum: bbf2c7ce993ff4fcbf0cf9a71ddbdd14 SHA1: b23ba0dd71c313fc073e5e24d29ce0c18fd2e758 SHA256: b5b5d95f03ec0fbb66d7a693c862b2bdf1b5f9d89fe7ad5964e4b17d5ecfe07f Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom SNDCP (Subnetwork Dependent Convergence Protocol) layer for GPRS and EGPRS Package: libosmo-gprs-sndcp1-dbgsym Source: libosmo-gprs Version: 0.2.1.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 136 Depends: libosmo-gprs-sndcp1 (= 0.2.1.0.202605271800) Filename: ./armhf/libosmo-gprs-sndcp1-dbgsym_0.2.1.0.202605271800_armhf.deb Size: 120252 MD5sum: 5ce3423c74197fb0b1597067743beccf SHA1: 305c4d035cafdac2f2e9c94337ad24b584621d76 SHA256: 494da9be30b10dc304f0f55612a9d9036dbe668ea6c30e6d67f0044981866deb Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-sndcp1 Build-Ids: e01b603a7446e66ca962c139514cbfcde5752e0f Package: libosmo-gsup-client-dev Source: osmo-hlr Version: 1.9.2.2.459a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 77 Depends: osmocom-nightly (= 202605271800), libosmo-gsup-client0 (= 1.9.2.2.459a.202605271800), libosmocore-dev Filename: ./armhf/libosmo-gsup-client-dev_1.9.2.2.459a.202605271800_armhf.deb Size: 23584 MD5sum: 68bdaeea79afb7458da2d9855230624e SHA1: 6db6014e8f39f86e56d17505db0f0e4005a2cdd3 SHA256: 382bc1d5cb9b40b44839539b9a87b2ee76c5622163ffda7e99e01abec2716c9f Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Development headers of Osmocom GSUP client library This is a shared library that can be used to implement client programs for the GSUP protocol. The typical GSUP server is OsmoHLR, with OsmoMSC, OsmoSGSN and External USSD Entities (EUSEs) using this library to implement clients. . This package contains the development headers. Package: libosmo-gsup-client0 Source: osmo-hlr Version: 1.9.2.2.459a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 86 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmoabis15, libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gsup-client0_1.9.2.2.459a.202605271800_armhf.deb Size: 19564 MD5sum: 230d62153f0940a2100505e7dbc3c8db SHA1: 919c2217b53ac490252bb9d6cb276d29f9b70602 SHA256: dc0404b4330d6794499978771388475649e9f377bf9d2c78a0905259245858f4 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Osmocom GSUP (General Subscriber Update Protocol) client library This is a shared library that can be used to implement client programs for the GSUP protocol. The typical GSUP server is OsmoHLR, with OsmoMSC, OsmoSGSN and External USSD Entities (EUSEs) using this library to implement clients. Package: libosmo-gtlv-dbg Source: libosmo-pfcp Version: 0.6.0.4.954c.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 55 Depends: osmocom-nightly (= 202605271800), libosmo-gtlv1 (= 0.6.0.4.954c.202605271800) Filename: ./armhf/libosmo-gtlv-dbg_0.6.0.4.954c.202605271800_armhf.deb Size: 41476 MD5sum: 0453743534c2b47b5099fade8a758c2c SHA1: 6a74b75e71189a3be48cb96a21e409e833496e98 SHA256: 8c1eb89b8c5662123777c987e6bd39b1372ccdc967f2a1944f0fc7d5013b3fcd Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Debug symbols for libosmo-gtlv libosmo-gtlv implements decoding, encoding and logging of protocols using a Tag-Length-Value and/or Tag-Length-Instance-Value structure. This package in particular contains the debug symbols for this library. Build-Ids: c173ce158725f9ed3a807cc6625424dcd6d6f48b Package: libosmo-gtlv-dev Source: libosmo-pfcp Version: 0.6.0.4.954c.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 184 Depends: osmocom-nightly (= 202605271800), libosmo-gtlv1 (= 0.6.0.4.954c.202605271800), libosmocore-dev (>= 1.12.0), libtalloc-dev (>= 2.1.0) Filename: ./armhf/libosmo-gtlv-dev_0.6.0.4.954c.202605271800_armhf.deb Size: 55688 MD5sum: 2e27773dee94912583b56b524b90fb19 SHA1: 47627062bca532d26f8a3f7bffc59dd64af958ac SHA256: 192035eb947583d31126b6a22b24b3d13fc3e155dd70aef6864b8d58aa699c6f Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Development files for libosmo-gtlv libosmo-gtlv implements decoding, encoding and logging of protocols using a Tag-Length-Value and/or Tag-Length-Instance-Value structure. This package in particular contains the files for compiling a program using this library. Package: libosmo-gtlv1 Source: libosmo-pfcp Version: 0.6.0.4.954c.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 81 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmo-gtlv1_0.6.0.4.954c.202605271800_armhf.deb Size: 15096 MD5sum: eac228e75a82f68088ff18a12e9d7f7c SHA1: 9801180d80eb9d57054d924d76f5ef6f9d8472b7 SHA256: 573bac3e7b7dd039344080296ffa981291517ab1639042b8f5b862af9cec9a5f Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Generic TLV and TLIV protocol support Decoding, encoding and logging of protocols using a Tag-Length-Value and/or Tag-Length-Instance-Value structure. Package: libosmo-hnbap-dbg Source: osmo-iuh Version: 1.8.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 301 Depends: osmocom-nightly (= 202605271800), libosmo-hnbap0 (= 1.8.0.0.202605271800) Filename: ./armhf/libosmo-hnbap-dbg_1.8.0.0.202605271800_armhf.deb Size: 198368 MD5sum: d92a9c15ca49987575081a7817fef931 SHA1: 170e0cdba9b849a36c568d6ba3be86a0f648b03d SHA256: e3fb9a74dba21aa2790416d13844bcb45db74e516d511383a022e40512b12883 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Build-Ids: d31dc28f34344fa03516c7d21efcb22598930892 Package: libosmo-hnbap-dev Source: osmo-iuh Version: 1.8.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 257 Depends: osmocom-nightly (= 202605271800), libosmo-hnbap0 (= 1.8.0.0.202605271800) Filename: ./armhf/libosmo-hnbap-dev_1.8.0.0.202605271800_armhf.deb Size: 25488 MD5sum: d42aa4d15fc02d17334508ff29f4067a SHA1: 550e2e2ee1c403b4fe20a50b5b39e92c1fdf29f1 SHA256: a8902f1bac90c3cfb39969e0784470da70bef660c81cf0290c4667a52a6c2dae Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-hnbap0 Source: osmo-iuh Version: 1.8.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 297 Depends: osmocom-nightly (= 202605271800), libasn1c1, libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-hnbap0_1.8.0.0.202605271800_armhf.deb Size: 44828 MD5sum: 94bec00890b4aa67bc69220106161d41 SHA1: 3f18fa72bca03555a7c7e3d46305f16293fbcd6f SHA256: f3bedcc0a3f6684e5c69bc666cfafd08382f261ec352e8ec4a5ef784e5dcecb3 Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-iuh-dev Source: osmo-iuh Version: 1.8.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 19 Depends: osmocom-nightly (= 202605271800) Filename: ./armhf/libosmo-iuh-dev_1.8.0.0.202605271800_armhf.deb Size: 7424 MD5sum: aa66976325ea29afc6d57ab162c9e708 SHA1: da8dd5338d751de2fe18e5c0c3f9febf15dea3fa SHA256: 9f41b635f0bf9545cedc85e24319a9df709df46ed8cd9058fbe97705eb6a66f9 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (common header files) Package: libosmo-mgcp-client-dev Source: osmo-mgw Version: 1.15.0.1.8afba.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 181 Depends: osmocom-nightly (= 202605271800), libosmo-mgcp-client14 (= 1.15.0.1.8afba.202605271800) Filename: ./armhf/libosmo-mgcp-client-dev_1.15.0.1.8afba.202605271800_armhf.deb Size: 60224 MD5sum: 2429b4b967d314542cc65c96ecd32cce SHA1: 2ee618cc63330c46ba6ebae6159c2675f9035fc1 SHA256: bdeb4199c5af459a510c03c6db55b2ef217c5ea23a89cce1ca972f4745d65263 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/osmo-mgw Description: libosmo-mgcp-client: Osmocom's Media Gateway Control Protocol client utilities Package: libosmo-mgcp-client14 Source: osmo-mgw Version: 1.15.0.1.8afba.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 159 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.7), libosmocore22, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-mgcp-client14_1.15.0.1.8afba.202605271800_armhf.deb Size: 55124 MD5sum: d356566845ab350ee5feaa500567deb9 SHA1: f07e4e29bda845a1f7d8625f163529b67fd5e789 SHA256: 7c21e02460afb954d11ddf79e652cf7c26f5203c193979ee5997aa3345e156ae Section: libs Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/osmo-mgw Description: libosmo-mgcp-client: Osmocom's Media Gateway Control Protocol client utilities Package: libosmo-mgcp-client14-dbgsym Source: osmo-mgw Version: 1.15.0.1.8afba.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 122 Depends: libosmo-mgcp-client14 (= 1.15.0.1.8afba.202605271800) Filename: ./armhf/libosmo-mgcp-client14-dbgsym_1.15.0.1.8afba.202605271800_armhf.deb Size: 102568 MD5sum: a90607296d2013194cc3615c4dee1ad3 SHA1: f2acdf725e51ee81057d150357759f770c10fd7e SHA256: 94bd270ca2cb80322131efe42fa15f7dc5c44425a0166cf387ad5ee635c57786 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-mgcp-client14 Build-Ids: 7bc09260e203d1afec54017decbd9d0d3530eea0 Package: libosmo-mslookup-dev Source: osmo-hlr Version: 1.9.2.2.459a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 96 Depends: osmocom-nightly (= 202605271800), libosmo-mslookup1 (= 1.9.2.2.459a.202605271800), libosmocore-dev Filename: ./armhf/libosmo-mslookup-dev_1.9.2.2.459a.202605271800_armhf.deb Size: 28148 MD5sum: 8ba2efd436b5df25fdb526721b0de328 SHA1: f92b77e01c17f9e52f421e15e85cd2eebcba9ebb SHA256: 008b74e338773d0cc53656db0554e0ccea0e8aa76d2c10890251f8f625ad6df0 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Development headers of Osmocom MS lookup library This shared library contains routines for looking up mobile subscribers. . This package contains the development headers. Package: libosmo-mslookup1 Source: osmo-hlr Version: 1.9.2.2.459a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 85 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-mslookup1_1.9.2.2.459a.202605271800_armhf.deb Size: 21580 MD5sum: 8ac923d08dbac3acf03bb5616786bc20 SHA1: 2d30c38a96d2072a67a011f0b2b5bdc24c8e1f9a SHA256: 7db4b6da31d77c96a6394e8b4938736e0d3e58c3793317b709d638e85ea7a74b Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Osmocom MS lookup library This shared library contains routines for looking up mobile subscribers. Package: libosmo-netif-dbg Source: libosmo-netif Version: 1.7.0.15.fe2d.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 242 Depends: osmocom-nightly (= 202605271800), libosmonetif11 (= 1.7.0.15.fe2d.202605271800) Filename: ./armhf/libosmo-netif-dbg_1.7.0.15.fe2d.202605271800_armhf.deb Size: 210376 MD5sum: b291d1e10dfef9a5f2670fd2aae95df7 SHA1: da739a6f4589a7186946f965f8c7d12e8063df5c SHA256: c0f815cd54f1d5ee92dba0477a10ca6a1b87683f3414a9f586be0d3974f0fc51 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-netif Description: Debug symbols for Osmocom network interface library The libosmo-netif library is one of the libraries needed by the OpenBSC GSM infrastructure software. This library in particular implements the shared code for network interfaces. . This package contains the debug symbols for the library. Build-Ids: f1e62d83d49c0f496ec09225a3ae4d0ff0b9e917 Package: libosmo-netif-dev Source: libosmo-netif Version: 1.7.0.15.fe2d.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 316 Depends: osmocom-nightly (= 202605271800), libosmocore-dev, libosmocore, libosmonetif11 (= 1.7.0.15.fe2d.202605271800) Filename: ./armhf/libosmo-netif-dev_1.7.0.15.fe2d.202605271800_armhf.deb Size: 86236 MD5sum: 0a98e49c1907dc768017cc1f6d63657e SHA1: 56ba2cd3c267e9a23b998e46ebf96fd13b29f5ab SHA256: 59dc7d9eaa8c7e89f33e979cd543627905fe07fa65413bae84212bcda8923b42 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-netif Description: Development headers for Osmocom network interface The libosmo-netif library is one of the libraries needed by the OpenBSC GSM infrastructure software. This library in particular implements the shared code for network interfaces. . This package contains the development files needed for developing with the libosmo-netif library. Package: libosmo-netif-doc Source: libosmo-netif Version: 1.7.0.15.fe2d.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 2190 Depends: osmocom-nightly (= 202605271800), libosmonetif11, libjs-jquery Filename: ./all/libosmo-netif-doc_1.7.0.15.fe2d.202605271800_all.deb Size: 194364 MD5sum: 96960807ea72603ce4ee31db539ec4d9 SHA1: 70d1d4595846406a3ea0c397eca2cce9d2e736ff SHA256: 6899cb3d5acb9c67a8d32e48ebad820b07e56a76b2b03c28ed338fc6bd9dcb4b Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmo-netif Description: Documentation for the Osmo network interface library The libosmo-netif library is one of the libraries needed by the OpenBSC GSM infrastructure software. This library in particular implements the shared code for network interfaces. . This package contains the documentation for the libosmo-netif library. Package: libosmo-octoi-dev Source: osmo-e1d Version: 0.7.2.2.1097.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 113 Depends: osmocom-nightly (= 202605271800), libosmo-octoi3 (= 0.7.2.2.1097.202605271800), libosmocore-dev Filename: ./armhf/libosmo-octoi-dev_0.7.2.2.1097.202605271800_armhf.deb Size: 32804 MD5sum: 7680b6e846a1ccb05fe84d93e7eee930 SHA1: f88d2693282f1bed265d25c4f6c8f21c0b4d52fb SHA256: 1a942f02363555fa29c643de4d76f19e741e26a301801be284212978db55f1e6 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: Development headers for the Osmocom Community TDMoIP library. Package: libosmo-octoi3 Source: osmo-e1d Version: 0.7.2.2.1097.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 86 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmocore22, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-octoi3_0.7.2.2.1097.202605271800_armhf.deb Size: 28332 MD5sum: b1238ff610ed990728ef4909c6763eec SHA1: 63082278d4335256a37ff1162eabf7c116d93ecf SHA256: 96b7cef23d4d40a02fa0f98537255838a18959cdeaf851411aac17a5136c14b6 Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: Library for the Osmocom Community TDMoIP network. Package: libosmo-octoi3-dbgsym Source: osmo-e1d Version: 0.7.2.2.1097.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 111 Depends: libosmo-octoi3 (= 0.7.2.2.1097.202605271800) Filename: ./armhf/libosmo-octoi3-dbgsym_0.7.2.2.1097.202605271800_armhf.deb Size: 92412 MD5sum: cc7193e960d4aa3cca01fa15daab2b4b SHA1: 3e78135769f01c9aa1e8d915c4991b0f24ec64cd SHA256: 1feec0a137dd4a9d8791fdb1aa2fb16798361d970d603e0cc30c92df9c388b70 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-octoi3 Build-Ids: f0b3cc29a454e54d6f2bac070f6ec3f5af16faa3 Package: libosmo-pfcp Version: 0.6.0.4.954c.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 10 Depends: osmocom-nightly (= 202605271800), libosmo-gtlv1 (= 0.6.0.4.954c.202605271800), libosmo-pfcp4 (= 0.6.0.4.954c.202605271800) Filename: ./armhf/libosmo-pfcp_0.6.0.4.954c.202605271800_armhf.deb Size: 3968 MD5sum: c47ac688b121fe452b2dd3af4d5250bc SHA1: 6b70f6d5fef9ebdf7fde6b4df7419a088ba11a75 SHA256: 5ae7fa5ffa2bfcef025c99fe97a4586765c5582fe9b5210e979adc5308ae3663 Section: libs Priority: optional Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Osmocom PFCP protocol implementation (metapackage) Install Osmocom PFCP and generic TLV protocol libraries. Package: libosmo-pfcp-dbg Source: libosmo-pfcp Version: 0.6.0.4.954c.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 162 Depends: osmocom-nightly (= 202605271800), libosmo-pfcp4 (= 0.6.0.4.954c.202605271800) Filename: ./armhf/libosmo-pfcp-dbg_0.6.0.4.954c.202605271800_armhf.deb Size: 139228 MD5sum: 14d0b723b438f93a48db844d367308d8 SHA1: fadb07dfefa4354e26b73b3b5d7039d98a54e632 SHA256: c93d9511f411773ba1cdb7600a669517b6cce1087db6562bb1d307f963348e73 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Debug symbols for libosmo-pfcp libosmo-pfcp implements decoding, encoding and endpoint implementation of the Packet Forwarding Control Protocol (3GPP TS 29.244). This package in particular contains the debug symbols for this library. Build-Ids: 7d32c03baaeefa7c134f60042cccf38b0f6e7ee7 Package: libosmo-pfcp-dev Source: libosmo-pfcp Version: 0.6.0.4.954c.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 709 Depends: osmocom-nightly (= 202605271800), libosmo-pfcp4 (= 0.6.0.4.954c.202605271800), libosmo-gtlv-dev (= 0.6.0.4.954c.202605271800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-pfcp-dev_0.6.0.4.954c.202605271800_armhf.deb Size: 175912 MD5sum: dc1f31ccf986d8feeea0b7e8dc07a649 SHA1: 1dad799430cd83bd04766b20d12a506c864d588b SHA256: 5005b5469e4e330a5f390b46595d50fc1af2af90725b0a25416c536ab7e149ea Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Development files for libosmo-pfcp libosmo-pfcp implements decoding, encoding and endpoint implementation of the Packet Forwarding Control Protocol (3GPP TS 29.244). This package in particular contains the files for compiling a program using this library. Package: libosmo-pfcp4 Source: libosmo-pfcp Version: 0.6.0.4.954c.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 146 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmo-gtlv1 (= 0.6.0.4.954c.202605271800), libosmocore22, libosmogsm20, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmo-pfcp4_0.6.0.4.954c.202605271800_armhf.deb Size: 37716 MD5sum: eb6167e79ce0bad04d9db67e5bafa3a9 SHA1: 1574dfb8cb5af6c3d1d5eaba6ce3763a152d5375 SHA256: b1566cd13c020dfd6d6a7d07835a1196075ea48254846bd66c76a5bc894f17bc Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: PFCP protocol support Decoding, encoding and endpoint implementation of the Packet Forwarding Control Protocol (3GPP TS 29.244). Package: libosmo-ranap-dbg Source: osmo-iuh Version: 1.8.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1495 Depends: osmocom-nightly (= 202605271800), libosmo-ranap7 (= 1.8.0.0.202605271800) Filename: ./armhf/libosmo-ranap-dbg_1.8.0.0.202605271800_armhf.deb Size: 1004812 MD5sum: 186c0ec9989248aad9af8f11632a231e SHA1: 66988a5ab9523a5f691ddb3b278aaa521ef018da SHA256: 0b3b609c13396cea6e92a0ef57f5f7258a6eeb137bbf1f404b339cf8bea2bc95 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Build-Ids: 6b08f4473d084c1a610a56c47212432dbe5c7f0d Package: libosmo-ranap-dev Source: osmo-iuh Version: 1.8.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1311 Depends: osmocom-nightly (= 202605271800), libosmo-ranap7 (= 1.8.0.0.202605271800), libosmo-iuh-dev Filename: ./armhf/libosmo-ranap-dev_1.8.0.0.202605271800_armhf.deb Size: 92900 MD5sum: ba6574349f9df66c0cc68b3d26e5bdee SHA1: 850e4b321fc4e4d4137606e5b62b209ce815b922 SHA256: 283d96f839b7709e4fd70a4c347b170134fc48e48f6f741d3eeccb6bb6d082c6 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-ranap7 Source: osmo-iuh Version: 1.8.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1401 Depends: osmocom-nightly (= 202605271800), libasn1c1, libc6 (>= 2.4), libosmo-sigtran12, libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-ranap7_1.8.0.0.202605271800_armhf.deb Size: 187084 MD5sum: 47d3d7b0b024d9e0c7f05f116af15868 SHA1: 8e58b8f2f06384c491c8328df85e0a615cce9ea5 SHA256: 0f73d89a145dae0cc21bc2a5fbd0cb7b9b025f97e7e48f72cf16276496edc98c Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-rspro-dev Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 298 Depends: osmocom-nightly (= 202605271800) Filename: ./armhf/libosmo-rspro-dev_1.1.3.15.201a.202605271800_armhf.deb Size: 63204 MD5sum: 0ed503095cddabdcc79fdd6b50188aa3 SHA1: b9f1a553f24fd10c83b9b9db471f0884f12bc212 SHA256: 0e2f3a9d24a06919ea8c8f92bbde86790d3d056b988697ff52973325e56c9dcb Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Shared Library Development Haders libosmo-rsrpo is an utility library for encoding/decoding the ASN.1 BER based RSPRO (Remote SIM Protocol) protocol used between the osmo-remsim programs. Package: libosmo-rspro2 Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 220 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-rspro2_1.1.3.15.201a.202605271800_armhf.deb Size: 55496 MD5sum: f8b66d740d2a761a766e5db83403dcaf SHA1: e632ff5457bd06f158cfa6279dcda87f11fe0572 SHA256: 70941d97b0944589fef20abfec9ca3e55049a8b3158a26de72a0aa21e0842a82 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Shared Library libosmo-rsrpo is an utility library for encoding/decoding the ASN.1 BER based RSPRO (Remote SIM Protocol) protocol used between the osmo-remsim programs. Package: libosmo-rspro2-dbgsym Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 251 Depends: libosmo-rspro2 (= 1.1.3.15.201a.202605271800) Filename: ./armhf/libosmo-rspro2-dbgsym_1.1.3.15.201a.202605271800_armhf.deb Size: 214768 MD5sum: cb0ab17e76782b76911d2a9d65c787de SHA1: 0358660969e116379de15efc51361cb6644e416a SHA256: 0095ba53333807e266ff4eeb38db81ed54835a64c1da58d11b3e72c757da975f Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-rspro2 Build-Ids: 6dc8565bcf58fc53b1726b50b9f3ea823ef25929 Package: libosmo-rua-dbg Source: osmo-iuh Version: 1.8.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 141 Depends: osmocom-nightly (= 202605271800), libosmo-rua0 (= 1.8.0.0.202605271800) Filename: ./armhf/libosmo-rua-dbg_1.8.0.0.202605271800_armhf.deb Size: 95888 MD5sum: 741d1a649ec4f90538a405f45025a624 SHA1: e94f1f7110e05394228a77247e002b79ea1af1ea SHA256: 99560488dca9b814bd7345314bf9dbb82ab98755295328adfebaa020c48903ba Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Build-Ids: f51d51e1d50185745dff8a425633ba84c2fcee64 Package: libosmo-rua-dev Source: osmo-iuh Version: 1.8.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 101 Depends: osmocom-nightly (= 202605271800), libosmo-rua0 (= 1.8.0.0.202605271800) Filename: ./armhf/libosmo-rua-dev_1.8.0.0.202605271800_armhf.deb Size: 15352 MD5sum: 2807bd1f1d4b5d64aad022ea790a5357 SHA1: ede53be0fced72b77214d636abd5cdd0f47ff78f SHA256: 0862a289807475c609936ab1bb2c5c8ef310d693a62f70b8adf4a773cd5316cc Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-rua0 Source: osmo-iuh Version: 1.8.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 157 Depends: osmocom-nightly (= 202605271800), libasn1c1, libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-rua0_1.8.0.0.202605271800_armhf.deb Size: 25460 MD5sum: 07dd3e0df9db9d7b2b25fa8924f8b475 SHA1: d963c5223367f1fcada17299206f82cee8ec0253 SHA256: 4de84f2ce7ade72a9e67c4979fa82fc7235ba0b99f522f43f79e3b72138c03df Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-sabp-dbg Source: osmo-iuh Version: 1.8.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 192 Depends: osmocom-nightly (= 202605271800), libosmo-sabp1 (= 1.8.0.0.202605271800) Filename: ./armhf/libosmo-sabp-dbg_1.8.0.0.202605271800_armhf.deb Size: 125540 MD5sum: 3cad5cc06c47a14c8926ba6f2bbe5a73 SHA1: fe2acebf3a0b198baaa1c247cc7cbbb16966ed45 SHA256: 8407623f7e23388a5e843ab41bcf37e03a0daa1b65f0ef92d31e6714caa753bf Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (SABP) Build-Ids: e2b502de64658fd46a65571d29583f6d81062fe5 Package: libosmo-sabp-dev Source: osmo-iuh Version: 1.8.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 158 Depends: osmocom-nightly (= 202605271800), libosmo-sabp1 (= 1.8.0.0.202605271800) Filename: ./armhf/libosmo-sabp-dev_1.8.0.0.202605271800_armhf.deb Size: 18404 MD5sum: 9c09eaae9f8e3ad2c7668908da2ab296 SHA1: 8c2a789049f0e95da9b21a16747e837e1b5bd1f6 SHA256: e882f689e4cbc110bcdfa7b89976bbad6220dc4f601055d2ac2a0c15fc179667 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (SABP) Package: libosmo-sabp1 Source: osmo-iuh Version: 1.8.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 224 Depends: osmocom-nightly (= 202605271800), libasn1c1, libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-sabp1_1.8.0.0.202605271800_armhf.deb Size: 32136 MD5sum: 416d64e9d23f1788a7dc4e3efcdf693a SHA1: eb8354e24a5686cecdea8b0788911337489c826d SHA256: 1c1df095b25c063eb0707fea68e14ba58d68a2bfd1b68d4899215a1597455987 Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (SABP) Package: libosmo-sbcap-dev Source: osmo-cbc Version: 0.5.3.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 3542 Depends: osmocom-nightly (= 202605271800), libosmo-sbcap2 (= 0.5.3.0.202605271800) Filename: ./armhf/libosmo-sbcap-dev_0.5.3.0.202605271800_armhf.deb Size: 514444 MD5sum: c3403eeb33bb5d7980de15a59accb923 SHA1: 369774537d8106debcd045b0af3d111013d860ee SHA256: 5643f4eaf1a132b88ebd7a96858c3753e8fc2210bef68c1292ae74257c7a57a8 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: libosmo-sbcap: Osmocom's library to encode/decode SBc-AP messages Package: libosmo-sbcap2 Source: osmo-cbc Version: 0.5.3.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1914 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmocore22 Filename: ./armhf/libosmo-sbcap2_0.5.3.0.202605271800_armhf.deb Size: 345408 MD5sum: 547c32444ed8247c7cb2e7d5d4da0524 SHA1: 15d0dfe5ddfa77e131a75d99737309d8edc2013d SHA256: 8d72a907bb53ae187df3cdecbc933f48b8f68ce5b5746ee4d36dca24f7f0cc38 Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: libosmo-sbcap: Osmocom's library to encode/decode SBc-AP messages Package: libosmo-sigtran-dbg Source: libosmo-sigtran Version: 2.2.1.101.fd7b.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 717 Depends: osmocom-nightly (= 202605271800), libosmo-sigtran12 (= 2.2.1.101.fd7b.202605271800) Filename: ./armhf/libosmo-sigtran-dbg_2.2.1.101.fd7b.202605271800_armhf.deb Size: 666256 MD5sum: ea027b33a1d201dfdb607a18c12759f5 SHA1: 825027cb6ff5c82bb25ee36e5dd2bfdfe2b082ed SHA256: b454a1673de58edcc87c517e156c8ed5a694c6d8967f8e1bed5016d980e0e7dd Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Documentation for the Osmocom SIGTRAN library libosmo-sigtran is a shared library containing SS7/SIGTRAN related functionality, including connection-less and connection-oriented SCCP as per ITU-T Q.71x, M3UA (MTP3 User Adaptation) according to IETF RFC4666, SUA (SCCP User Adpatation) according to IETF RFC3868 as well as MTP-level routing function and handling of signaling links, linksets, ASPs, SGs, etc. Build-Ids: d8e3074e84c81b127fd1426f7c442bbb8a1b80e5 Package: libosmo-sigtran-dev Source: libosmo-sigtran Version: 2.2.1.101.fd7b.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2918 Depends: osmocom-nightly (= 202605271800), libosmo-sigtran12 (= 2.2.1.101.fd7b.202605271800), libosmocore-dev, libosmo-asn1-tcap-dev, libosmo-netif-dev Filename: ./armhf/libosmo-sigtran-dev_2.2.1.101.fd7b.202605271800_armhf.deb Size: 822780 MD5sum: ae8176ff6a2785de9caebe3123464563 SHA1: 7128c623c561b29bf926eb8d980861fd9852b8db SHA256: 2f145ffb160180b61c0c0220eddb04a48fbd60f2ba7e950219743c53870621a9 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Development headers for the Osmocom SIGTRAN library libosmo-sigtran is a shared library containing SS7/SIGTRAN related functionality, including connection-less and connection-oriented SCCP as per ITU-T Q.71x, M3UA (MTP3 User Adaptation) according to IETF RFC4666, SUA (SCCP User Adpatation) according to IETF RFC3868 as well as MTP-level routing function and handling of signaling links, linksets, ASPs, SGs, etc. Package: libosmo-sigtran-doc Source: libosmo-sigtran Version: 2.2.1.101.fd7b.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 12205 Depends: osmocom-nightly (= 202605271800), libosmo-sigtran12 (= 2.2.1.101.fd7b.202605271800), libjs-jquery Filename: ./all/libosmo-sigtran-doc_2.2.1.101.fd7b.202605271800_all.deb Size: 624640 MD5sum: e6e7fa8692a369644fc4a1f7c02ac0ab SHA1: 50ee5b9d79c0520d77903135b851af82f8d855fa SHA256: 382b258a960cbf4e7582cc5aeac7627b0c85c4f870894ce27b623b6225c65565 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Documentation for the Osmocom SIGTRAN library libosmo-sigtran is a shared library containing SS7/SIGTRAN related functionality, including connection-less and connection-oriented SCCP as per ITU-T Q.71x, M3UA (MTP3 User Adaptation) according to IETF RFC4666, SUA (SCCP User Adpatation) according to IETF RFC3868 as well as MTP-level routing function and handling of signaling links, linksets, ASPs, SGs, etc. Package: libosmo-sigtran12 Source: libosmo-sigtran Version: 2.2.1.101.fd7b.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 484 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmo-asn1-tcap1, libosmocore22, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-sigtran12_2.2.1.101.fd7b.202605271800_armhf.deb Size: 152328 MD5sum: 788c34e87ca25781a8a9c87c1309776d SHA1: fd9dd2b273cd6f9fdafa17e5065648a43ba535b4 SHA256: 774715dae410a3ab680c04d40eb3ede76c208b8f8d0619349abd97875739a675 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Osmocom SIGTRAN library (SCCP, SUA, M3UA and more) This is a shared library containing SS7/SIGTRAN related functionality, including connection-less and connection-oriented SCCP as per ITU-T Q.71x, M3UA (MTP3 User Adaptation) according to IETF RFC4666, SUA (SCCP User Adpatation) according to IETF RFC3868 as well as MTP-level routing function and handling of signaling links, linksets, ASPs, SGs, etc. Package: libosmo-simtrace2-1 Source: simtrace2 Version: 0.9.0.2.e196.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 82 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmocore22, libosmosim2, libusb-1.0-0 (>= 2:1.0.8) Filename: ./armhf/libosmo-simtrace2-1_0.9.0.2.e196.202605271800_armhf.deb Size: 12772 MD5sum: 4445ef69486703cf9e31dd666eecb118 SHA1: a9ca637e70e201ddddf6868bfbabf77268ffcb71 SHA256: 925c5735cd41c3149468b7d5c9a6f35f6d5aff6f45337fe736fd6efe4f327cfb Section: libs Priority: optional Multi-Arch: same Homepage: http://osmocom.org/projects/simtrace2/wiki Description: Osmocom SIMtrace2 library This library contains core "driver" functionality to interface with the Osmocom SIMtrace2 (and compatible) USB device firmware. It enables applications to implement SIM card / smart card tracing as well as SIM / smart card emulation functions. Package: libosmo-simtrace2-1-dbgsym Source: simtrace2 Version: 0.9.0.2.e196.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 39 Depends: libosmo-simtrace2-1 (= 0.9.0.2.e196.202605271800) Filename: ./armhf/libosmo-simtrace2-1-dbgsym_0.9.0.2.e196.202605271800_armhf.deb Size: 25948 MD5sum: 9a2c81038c1c7194e2677effe2717690 SHA1: 0f516f6c16ce8778559355929ec772ff72a6a9d6 SHA256: 15472f86d302625af4417b6243f11fda4385fcfdd5ca5e1b498eaad1996a62e6 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-simtrace2-1 Build-Ids: 8c926186b47c58f0f7ccbeb93c62fb98ae96d16c Package: libosmo-simtrace2-dev Source: simtrace2 Version: 0.9.0.2.e196.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 60 Depends: osmocom-nightly (= 202605271800), libosmo-simtrace2-1 Filename: ./armhf/libosmo-simtrace2-dev_0.9.0.2.e196.202605271800_armhf.deb Size: 18380 MD5sum: 51e30fc267ab9d7397d97d6d5a811e43 SHA1: c10ee18dc47cafc00bc7163efe6ed64f2afd2e3f SHA256: da2e0d5083d3485c328c1bcfee349b7ac574131b777d99c90702527521c465dc Section: libdevel Priority: optional Multi-Arch: same Homepage: http://osmocom.org/projects/simtrace2/wiki Description: Development headers for Osmocom SIMtrace2 library This library contains core "driver" functionality to interface with the Osmocom SIMtrace2 (and compatible) USB device firmware. It enables applications to implement SIM card / smart card tracing as well as SIM / smart card emulation functions. . The header files provided by this package may be used to develop with any of the libosmocore libraries. . Also static libraries are installed with this package. Package: libosmoabis15 Source: libosmo-abis Version: 2.1.0.13.898f6.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 218 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libosmoisdn0, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmoabis15_2.1.0.13.898f6.202605271800_armhf.deb Size: 63996 MD5sum: db8f1679f846fde91840b0248411c95b SHA1: 1880b6751f4e92200149aae404b3189506efc9b9 SHA256: f1b2edd885a41754f887c25ffd0c5a22bd5db2a847b5d2dff261c1f6211f852c Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: GSM A-bis handling This library contains common/shared code regarding the A-bis interface between the GSM Base transceiver station (BTS) and the GSM Base station controller BSC. . It also implements drivers for mISDN and DAHDI based E1 cards, as well as some A-bis/IP dialects. Package: libosmocodec-doc Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 4225 Depends: osmocom-nightly (= 202605271800), libosmocodec4, libjs-jquery Filename: ./all/libosmocodec-doc_1.14.0.3.c812.202605271800_all.deb Size: 478044 MD5sum: fd05713b26e776e888cec726b00d8e76 SHA1: 2ec11f5ae0ea7f7120cc3c843b16de34443422c0 SHA256: 0432a1c35b520eafdba115da10db36898bd48fa6afe57001b285113ba4bf0ee4 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the osmo codec library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmocodec library. Package: libosmocodec4 Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 127 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmocore22 Filename: ./armhf/libosmocodec4_1.14.0.3.c812.202605271800_armhf.deb Size: 55132 MD5sum: 1b06129a624f356e7df983e93943043f SHA1: 889a46176ff742d693c2edc0b5fecf46f4d1feaa SHA256: fe2e830cc44f79fceb1fc36d0524f66b8b56579aa32736f342b54c242fbacdf9 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo codec library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmocodec library in particular contains the implementation of multiple GSM codecs: . - GSM 06.10 - GSM FR Codec - GSM 06.20 - GSM HR Codec - GSM 06.60 - GSM EFR Codec - GSM 06.90 - GSM AMR Codec Package: libosmocoding-doc Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 5276 Depends: osmocom-nightly (= 202605271800), libosmocoding0, libjs-jquery Filename: ./all/libosmocoding-doc_1.14.0.3.c812.202605271800_all.deb Size: 526872 MD5sum: 4fd9def57b4b968fe406c3b6917161f6 SHA1: b338fe509bc1c3dafce17ca2edfdd0221f8052b2 SHA256: eee77dbe3396afc3ea980ac3f54c82d2f996ec297d972a615ab253985c9fd35b Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the osmo coding library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmocoding library. Package: libosmocoding0 Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 191 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmocodec4, libosmocore22, libosmogsm20 Filename: ./armhf/libosmocoding0_1.14.0.3.c812.202605271800_armhf.deb Size: 72368 MD5sum: 22262050e8d9390001080ca8dd3ce305 SHA1: 58cdd361d54759f2a8718fc7bc1597e430b812a6 SHA256: 3296f78b1f6d1f6fc699927fd6d5e4225aae21487779938fcea8b3552d36fc09 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo coding library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmocoding library in particular contains the implementation of GSM, GPRS and EDGE transcoding routines, migrated from OsmoBTS. Package: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 65 Depends: osmocom-nightly (= 202605271800), libosmocodec4 (= 1.14.0.3.c812.202605271800), libosmocoding0 (= 1.14.0.3.c812.202605271800), libosmocore22 (= 1.14.0.3.c812.202605271800), libosmogb14 (= 1.14.0.3.c812.202605271800), libosmogsm20 (= 1.14.0.3.c812.202605271800), libosmoisdn0 (= 1.14.0.3.c812.202605271800), libosmovty13 (= 1.14.0.3.c812.202605271800), libosmoctrl0 (= 1.14.0.3.c812.202605271800), libosmosim2 (= 1.14.0.3.c812.202605271800), libosmousb0 (= 1.14.0.3.c812.202605271800) Filename: ./armhf/libosmocore_1.14.0.3.c812.202605271800_armhf.deb Size: 47148 MD5sum: ae9d28b43aff20a1a620ccbdddd39e85 SHA1: 7cad370659fbf576156adc5df66262f47b87986c SHA256: 3037812fee4d9315fdb60becee4a660849feb15d2d1df8cf8b36aaa1428fef0f Section: libs Priority: optional Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/libosmocore Description: Open Source MObile COMmunications CORE library (metapackage) The libraries provided by this package contain various utility functions. These were originally developed as part of the OpenBSC project but are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. Package: libosmocore-dbg Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2418 Depends: osmocom-nightly (= 202605271800), libosmocore (= 1.14.0.3.c812.202605271800) Filename: ./armhf/libosmocore-dbg_1.14.0.3.c812.202605271800_armhf.deb Size: 2162000 MD5sum: c663168e830d7f54cef17a328c8c7e4a SHA1: 4f316f265898afbf25928bb855a0e3d96aca661a SHA256: 219340061277eee42b2005084e1e39137018041127f0bd2583d8a4b2cf5b7607 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Debug symbols for Open Source MObile COMmunications CORE library This proackage contains debug symbols for all the libraries that are part of libosmocore. . The libosmocore library contain various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. Build-Ids: 13deab0099654b8712b03a1f367fc3039a7f6979 24dde9f6b7d7584dfe133c78f892bb17818e5415 27259e216abf1874eff3fa57baa3280f479091e5 4ae2cd4c9995f56c4686fded065ce173d40504c9 63bed5168975ffcc1e6eadc3b47cc0010a61e1c1 84ac02f4faffd4badf1a9602a57f5b093f3fd503 86a57f9cf846eea0dc128a202770e38de4ebc60d 8ee44dab812b8615600d27790c21901ca5b8b5c2 9856756e6695c2abe4315c1e49a566ee384dd7a0 b4fc66dfbac5e0c3fde515bae458cfe148c7f469 ba5e51fbb9968d362cf2ebd6d4c38e4d25400726 c597604ed747e74c1660d4b42da3282900c228ee cb6fcd5641aed033dbee551e7d3fe85816846da3 cdd52b41d7f07330f637953eff71c940f715fa27 df2b16727d03f8302d5620d8d7d28a0de359c990 Package: libosmocore-dev Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 3366 Depends: osmocom-nightly (= 202605271800), libosmocore, libtalloc-dev (>= 2.1.0), libsctp-dev, libusb-1.0-0-dev, libmnl-dev Filename: ./armhf/libosmocore-dev_1.14.0.3.c812.202605271800_armhf.deb Size: 799460 MD5sum: 43e6c4f4b7fe4980c83db24f23634c0e SHA1: 8200e0ae9abde50d56b64389a1a4b0554677e0e5 SHA256: d5d4cfae5e0d859a53367658c143b6caa9833f1ffbdf55a596106f3373b4051b Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Development headers for Open Source MObile COMmunications CORE library The header files provided by this package may be used to develop with any of the libosmocore libraries. . Also static libraries are installed with this package. Package: libosmocore-doc Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 17475 Depends: osmocom-nightly (= 202605271800), libosmocore22, libjs-jquery, libosmocodec-doc, libosmocoding-doc, libosmogsm-doc, libosmoisdn-doc, libosmovty-doc, libosmoctrl-doc, libosmogb-doc, libosmosim-doc, libosmousb-doc Filename: ./all/libosmocore-doc_1.14.0.3.c812.202605271800_all.deb Size: 1066976 MD5sum: 1db8119d1f53947acadbbb9004f6733a SHA1: 82e93799d26b2db13a63494b9b429cc2a6d5ffcb SHA256: 9ddd2ea02f41ee9aca2b876eb313186cbd57eb47ae898de35c254f924ebed20f Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo Core library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmocore library. Package: libosmocore-utils Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 391 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libtalloc2 (>= 2.1.0), python3, libosmocore Filename: ./armhf/libosmocore-utils_1.14.0.3.c812.202605271800_armhf.deb Size: 59916 MD5sum: db62e90a20eeb881bf18fefc76a925c5 SHA1: b8cccffcc244082687612728a99c3bd271b44eb9 SHA256: ea30e42d2044098421acf5e7a423afc410c831f8f9e37548ac0b48bb68bc3678 Section: utils Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Utilities for gsm This package contains a program for frequency calculation for GSM called 'osmo-arfcn' and a program called 'osmo-auc-gen' that is used for testing GSM authentication, as well as 'osmo-config-merge', a tool for merging Osmocom configuration files. . They use the libosmocore library. The libosmocore library contain various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. Package: libosmocore22 Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 383 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.38), libmnl0 (>= 1.0.3-4~), libsctp1 (>= 1.0.12+dfsg), libsystemd0, libtalloc2 (>= 2.1.0), liburing2 (>= 2.3) Filename: ./armhf/libosmocore22_1.14.0.3.c812.202605271800_armhf.deb Size: 153680 MD5sum: 89d9ab2cb04d04f6ab7023ab1b66f49c SHA1: 8f181db75179ee64da3717d3fc35eb8b55b6c374 SHA256: 4ae65de5508f2b762551f2296ed4a9d9d23374f86b990572c5498388884bfb9c Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo Core library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmocore library in particular is a collection of common code used in various sub-projects inside the Osmocom family of projects. Package: libosmoctrl-doc Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 3749 Depends: osmocom-nightly (= 202605271800), libosmoctrl0, libjs-jquery Filename: ./all/libosmoctrl-doc_1.14.0.3.c812.202605271800_all.deb Size: 456844 MD5sum: 5e69343c832514bac9a759b5c5531a46 SHA1: 86a4603d94022aa04b4ad651232b8bb1f239b787 SHA256: 9d0f9007ce8d323f3bb7ded5ae19825f1c3788cfb31f7404adc98f74c67b3796 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmocom CTRL library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmoctrl library. Package: libosmoctrl0 Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 127 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmoctrl0_1.14.0.3.c812.202605271800_armhf.deb Size: 61212 MD5sum: 1d52e531d55db2b8cdf7313fdea85d0f SHA1: c511b102e1cf70d95f8717a797439370895cc52f SHA256: 73b0cf1ffdd6067ce20c6537f2be65675624739735073321e555cae21c54198f Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo control library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmoctrl library in particular contains an SNMP-like status interface. Package: libosmodsp-dbg Source: libosmodsp Version: 0.4.0.12.f6f4.202605271800 Architecture: armhf Maintainer: Harald Welte Installed-Size: 36 Depends: osmocom-nightly (= 202605271800), libosmodsp0 (= 0.4.0.12.f6f4.202605271800) Filename: ./armhf/libosmodsp-dbg_0.4.0.12.f6f4.202605271800_armhf.deb Size: 21704 MD5sum: e7dfd7f6a133cd0c4bf5470b8977f29b SHA1: 344da6084a029aabd54fc56dce9fe54407f0890a SHA256: 7218cd45847cd190e84ead325ac153420521bd18dcee6e4354f6f02a43c04a48 Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/libosmo-dsp Description: Debug symbols for Osmocom DSP library C-language library for common DSP (Digital Signal Processing) primitives for SDR (Software Defined Radio). They are part of the Osmocom (Open Source Mobile Communications) project. . This package contains the debug symbols for the library. Build-Ids: 01ded41626721cd4bbb0187ff48a69a9a4e46ba0 Package: libosmodsp-dev Source: libosmodsp Version: 0.4.0.12.f6f4.202605271800 Architecture: armhf Maintainer: Harald Welte Installed-Size: 45 Depends: osmocom-nightly (= 202605271800), libosmodsp0 (= 0.4.0.12.f6f4.202605271800) Filename: ./armhf/libosmodsp-dev_0.4.0.12.f6f4.202605271800_armhf.deb Size: 11192 MD5sum: 3219869ff3de0a06bf96b3c0c89adfde SHA1: 98d007711c6720276dd255017fc6085446e97aae SHA256: 6e116f8f5489ae3f04d475f41b3943f58562670207379eed660dd401dfcf35ac Section: libdevel Priority: optional Multi-Arch: same Homepage: https://osmocom.org/projects/libosmo-dsp Description: Development headers for Osmocom DSP Library C-language library for common DSP (Digital Signal Processing) primitives for SDR (Software Defined Radio). They are part of the Osmocom (Open Source Mobile Communications) project. . This package contains the development files needed for developing with the libosmodsp library. Package: libosmodsp-doc Source: libosmodsp Version: 0.4.0.12.f6f4.202605271800 Architecture: all Maintainer: Harald Welte Installed-Size: 917 Depends: osmocom-nightly (= 202605271800), libosmodsp0, libjs-jquery Filename: ./all/libosmodsp-doc_0.4.0.12.f6f4.202605271800_all.deb Size: 117368 MD5sum: 04a7f16029a07c10f657d346cafbb1aa SHA1: 618f25ae8b768b1bd89b8aa7b984d345a284a212 SHA256: f30b68a16cedb5782703df8750dd5cf60ff1699ac83d4ea9af42ea5e7e52a7f5 Section: doc Priority: optional Homepage: https://osmocom.org/projects/libosmo-dsp Description: Documentation for the Osmocom DSP Library C-language library for common DSP (Digital Signal Processing) primitives for SDR (Software Defined Radio). They are part of the Osmocom (Open Source Mobile Communications) project. . This package contains the documentation for the libosmodsp library. Package: libosmodsp0 Source: libosmodsp Version: 0.4.0.12.f6f4.202605271800 Architecture: armhf Maintainer: Harald Welte Installed-Size: 80 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libfftw3-single3 (>= 3.3.10) Filename: ./armhf/libosmodsp0_0.4.0.12.f6f4.202605271800_armhf.deb Size: 8948 MD5sum: eafcc4f9bbaca3fc03320dfa0da0994a SHA1: 5ac22e38a2ca8053e4324b362c240e8321327e4e SHA256: b63abdcba56b6757e11cf9114f33bf5b89b475c2c49e4ccf36bae3a245d86fcb Section: libs Priority: optional Multi-Arch: same Homepage: https://osmocom.org/projects/libosmo-dsp Description: Osmocom Software Defined Radio Digital Signal Processing Library C-language library for common DSP (Digital Signal Processing) primitives for SDR (Software Defined Radio). They are part of the Osmocom (Open Source Mobile Communications) project. Package: libosmogb-doc Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 13747 Depends: osmocom-nightly (= 202605271800), libosmogb14, libjs-jquery Filename: ./all/libosmogb-doc_1.14.0.3.c812.202605271800_all.deb Size: 874504 MD5sum: 202d3c359f949fa2aaa720e146a4116d SHA1: 59186306f75d276ddb95aa95a1d132158fa5d903 SHA256: 9f61e0fc3262c2e0605dafa21b78897af9811f06c90a43de64ed80e0509d348f Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo GPRS Gb library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmogb library. Package: libosmogb14 Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 451 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmogb14_1.14.0.3.c812.202605271800_armhf.deb Size: 161196 MD5sum: 841bdb409dedbf5942f471a5ee9857f6 SHA1: d26975197ec2790f91cfc0e9ddfd6bd4cad2026c SHA256: 4a31d2c588cda46a8e6d6aba12e349c52527baddc6b81b08cf5614608a0aea97 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo GPRS GB library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmogb library in particular contains a GPRS BSSGP protocol implementation. Package: libosmogsm-doc Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 34993 Depends: osmocom-nightly (= 202605271800), libosmogsm20, libjs-jquery Filename: ./all/libosmogsm-doc_1.14.0.3.c812.202605271800_all.deb Size: 2146988 MD5sum: 51421bf4bdaef62b9baede9cad39afc9 SHA1: e4e57389297a71f8f6271cfcff0ff792368c4d10 SHA256: 94093256c7d3defb7e4343dce67292b0b55a4f052a070cc75edd5d171da5929c Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo GSM utility library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmogsm library. Package: libosmogsm20 Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 575 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libgnutls30t64 (>= 3.7.2), libosmocore22, libosmoisdn0, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmogsm20_1.14.0.3.c812.202605271800_armhf.deb Size: 199868 MD5sum: 59c7a8f5da8fd8be68de47b57d804fa1 SHA1: b2ae7e1d636d0321bb509e5c0a64aeeddee1bc42 SHA256: 5e3267578ff4ddd71ab5d8d3adc546e654f0652d3888edda4b2fb32be2c8e7b1 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo GSM utility library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmogsm library in particular is a collection of common code used in various GSM related sub-projects inside the Osmocom family of projects. It includes A5/1 and A5/2 ciphers, COMP128v1, a LAPDm implementation, a GSM TLV parser, SMS utility routines as well as protocol definitions for a series of protocols. Package: libosmoisdn-doc Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 3649 Depends: osmocom-nightly (= 202605271800), libosmoisdn0, libjs-jquery Filename: ./all/libosmoisdn-doc_1.14.0.3.c812.202605271800_all.deb Size: 376152 MD5sum: 1eb220d4fe7f4e07b58bb63c07617fd0 SHA1: 0f2827219e7b8f438c7f9c59b70bce71ca1e7c13 SHA256: b2d6fd05643e8054b0753518a5e6b7b3c908aa1cdd393065d1f5c6f19f234eb7 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo ISDN utility library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmoisdn library. Package: libosmoisdn0 Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 127 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmoisdn0_1.14.0.3.c812.202605271800_armhf.deb Size: 70824 MD5sum: c8daf95f8f527e96ad0c390338f683df SHA1: e93a1d4694f75cb4a0d50d282ab21a34229a2824 SHA256: f253cf3e1057abe07cf1a4d1b9156fc26a84ac62a565b046d4e7ce90e1589129 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo ISDN utility library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmoisdn library in particular is a collection of common code used in various ISDN related sub-projects inside the Osmocom family of projects. It includes an I.460 sub-channel multiplex and a generic LAPD core. Package: libosmonetif11 Source: libosmo-netif Version: 1.7.0.15.fe2d.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 215 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libosmovty13, libsctp1 (>= 1.0.10+dfsg), libtalloc2 (>= 2.0.4~git20101213) Conflicts: libosmonetif2 Filename: ./armhf/libosmonetif11_1.7.0.15.fe2d.202605271800_armhf.deb Size: 63956 MD5sum: 715944cf13517c19603f04a1b112c639 SHA1: 2d7027087782b8ee30409722e6b850f8dc7d90f9 SHA256: 3349e627e6bb230996d8c827bfa478933421c5c6355dc012262d4a5c917fc3f6 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-netif Description: Common/shared code regarding network interface for OpenBSC The libosmo-netif library is one of the libraries needed by the OpenBSC GSM infrastructure software. This library in particular implements the shared code for network interfaces. Package: libosmosim-doc Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 2062 Depends: osmocom-nightly (= 202605271800), libosmosim2, libjs-jquery Filename: ./all/libosmosim-doc_1.14.0.3.c812.202605271800_all.deb Size: 223084 MD5sum: 8671ba72a619b878921587167bf9ae30 SHA1: 93026cb424aadbf1d97c9ba79596fae90bc48e1b SHA256: 3c3ab88f8b63168da3f57795539652ed750f2996f5a5428a2363490d613a1220 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo SIM library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmosim library. Package: libosmosim2 Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 191 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmocore22, libosmogsm20, libpcsclite1 (>= 1.5.0), libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmosim2_1.14.0.3.c812.202605271800_armhf.deb Size: 63720 MD5sum: 9764545b48a374aeb2daa17fadbb5e33 SHA1: 30d614fb19f6b627db6d1bcbd423d46404100ff3 SHA256: 93f53da7992ffa65280727e36c7baf042d92881ab1e4622743a8e6c524447071 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo SIM library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmosim library in particular contains routines for SIM card access. Package: libosmotrau11 Source: libosmo-abis Version: 2.1.0.13.898f6.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 181 Depends: osmocom-nightly (= 202605271800), libbctoolbox2 (>= 5.3.104), libbctoolbox2 (<< 5.4.0), libc6 (>= 2.4), libortp16 (>= 1:5.3.0), libortp16 (<< 1:5.4.0), libosmocodec4, libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmotrau11_2.1.0.13.898f6.202605271800_armhf.deb Size: 44260 MD5sum: fb7cbd154c3248a6a3aa5b6004952ca7 SHA1: 71c031000818b40d65bb20adab3c69040c4cc7b2 SHA256: ad62cd41e6ba1139113a69eb5241389bde75d0409f68d665e989122b536b0b5e Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: GSM trau handling This library implements the Transcoder and Rate Adaptation Unit (TRAU) for GSM systems. It is closely related to the libosmo-abis library. . TRAU performs transcoding function for speech channels and rate adaptation (RA) for data channels in the GSM network. Package: libosmousb-doc Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 1068 Depends: osmocom-nightly (= 202605271800), libosmousb0, libjs-jquery Filename: ./all/libosmousb-doc_1.14.0.3.c812.202605271800_all.deb Size: 186756 MD5sum: b6d83ee3d8cb2aba87b017c7e5898dfc SHA1: 6f154e75740027d2a8f905ff8e472d3f575972cf SHA256: 6546a2bbafeb1fe9856e5303b4c7cc720297693b8a52b81db25d3d7e3c55299b Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo USB library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmousb library. Package: libosmousb0 Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 127 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.1.0), libusb-1.0-0 (>= 2:1.0.20) Filename: ./armhf/libosmousb0_1.14.0.3.c812.202605271800_armhf.deb Size: 53028 MD5sum: af41bc694843cbf3d9ea9afef6474866 SHA1: e376d21ff9d1a5b938dce0b50be3cb22280cb68e SHA256: 66dfbc46b7e7d9ae5858fa58b72c50c12a78fe5ee4d9308fcf047558c63aaa9f Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo USB library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmosub library in particular contains routines for USB device access via libusb-1.0, integrated into the libosmocore select event loop. Package: libosmovty-doc Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 7337 Depends: osmocom-nightly (= 202605271800), libosmovty13, libjs-jquery Filename: ./all/libosmovty-doc_1.14.0.3.c812.202605271800_all.deb Size: 644144 MD5sum: 31bc4e1de12c8a7a934a436ff42ddeb2 SHA1: c069bfb89139b3ab7b6b4e9f3bde02f487bd8811 SHA256: 946dd8ce33e06e418434ea0fc845b752428bc49466f2cd5de3aab7a97e25e2bc Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo VTY library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmovty library. Package: libosmovty13 Source: libosmocore Version: 1.14.0.3.c812.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 261 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.38), libosmocore22, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmovty13_1.14.0.3.c812.202605271800_armhf.deb Size: 99764 MD5sum: 171fc84d9bbc6da74de5d0508881ec01 SHA1: 79c84ffd2dd25db0f17e8196a0b5757f5c42c8d1 SHA256: 3a63e78590e204569c836215298cb973deee86b1da716377104c06076867f139 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo VTY library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmovty library in particular implements the interactive command-line on the VTY (Virtual TTY) as well as configuration file parsing. Package: librtlsdr-dev Source: rtl-sdr Version: 2.0.2.5.8419.202605271800 Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 119 Depends: osmocom-nightly (= 202605271800), librtlsdr0 (= 2.0.2.5.8419.202605271800), libusb-1.0-0-dev Filename: ./armhf/librtlsdr-dev_2.0.2.5.8419.202605271800_armhf.deb Size: 31748 MD5sum: 77f5459c59e19fb5c8ee33bde54346bc SHA1: c7944040799c141c01681ccf718a632f3a4bad55 SHA256: e4effaf8d23e5c2f3bed8038d3707728b62df44c8066c6b9e3ce562e739e27c5 Section: libdevel Priority: optional Homepage: http://sdr.osmocom.org/trac/wiki/rtl-sdr Description: Software defined radio receiver for Realtek RTL2832U (development) rtl-sdr is a software defined radio (SDR) receiver software for certain low-cost DVB-T/DAB(+) USB dongles based on the Realtek RTL2832U chip. . This package contains development files. Package: librtlsdr0 Source: rtl-sdr Version: 2.0.2.5.8419.202605271800 Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 108 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4), libusb-1.0-0 (>= 2:1.0.21) Filename: ./armhf/librtlsdr0_2.0.2.5.8419.202605271800_armhf.deb Size: 26356 MD5sum: 267a43cb394d645a413047df9ea21735 SHA1: fbc1522845f258fe77a8f3006d16bad37e3debec SHA256: d23b6b8cd8e5b2f15f12aacb42c97503fd10df48011a4bb0f3df6e3137ff857e Section: libs Priority: optional Multi-Arch: same Homepage: http://sdr.osmocom.org/trac/wiki/rtl-sdr Description: Software defined radio receiver for Realtek RTL2832U (library) rtl-sdr is a software defined radio (SDR) receiver software for certain low-cost DVB-T/DAB(+) USB dongles based on the Realtek RTL2832U chip. . This package contains the shared library. Package: librtlsdr0-dbgsym Source: rtl-sdr Version: 2.0.2.5.8419.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 109 Depends: librtlsdr0 (= 2.0.2.5.8419.202605271800) Filename: ./armhf/librtlsdr0-dbgsym_2.0.2.5.8419.202605271800_armhf.deb Size: 91796 MD5sum: 876e808496e72f5cc8d5c0b26e0ceb37 SHA1: f2dfcfcde7a53fe336efb9639f06f390479db72a SHA256: 543ba8cade9b992aa73193d9489d88317aba07cdbbb0ed668b2c9e869b0402cd Section: debug Priority: optional Multi-Arch: same Description: debug symbols for librtlsdr0 Build-Ids: af9c75ef22665536248d5f7b8c16d678b956ed9a Package: libsmpp1 Source: libsmpp34 Version: 1.14.5.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 401 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.4) Filename: ./armhf/libsmpp1_1.14.5.0.202605271800_armhf.deb Size: 89028 MD5sum: 8366bedd06aa381e0e718f8158ab1779 SHA1: 379dec263465e45f6ed955a44c4449c817c8436b SHA256: daad761c2eadc81a513f479747befdbfba53a27827d9346132b8c7079d149296 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libsmpp34 Description: Open PDU SMPP packaging and unpackaging tool This library is an implementation for providing the PDU handling of the SMPP-3.4 protocol. SMPP (Short Message Peer-to-Peer) is an open industry standard protocol designed to provide a flexible data communication interface for the transfer of short message data between External Short Messaging Entities, Routing Entitites and Message Centres. Package: libsmpp34-dbg Source: libsmpp34 Version: 1.14.5.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 527 Depends: osmocom-nightly (= 202605271800), libsmpp1 (= 1.14.5.0.202605271800) Filename: ./armhf/libsmpp34-dbg_1.14.5.0.202605271800_armhf.deb Size: 517644 MD5sum: 0263bcbd6553d0085868297fedda6105 SHA1: 119b44db5feecfaddf0f7e50f9ec69dceb2e858a SHA256: 91c3bf285caa718107b55f37548bb87b9a98117759518327c866aa03b8cd4eae Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/libsmpp34 Description: Debug symbols for libsmpp34 Build-Ids: 9a6ba8f6a4d63a53a5c5cbec72d0155880536ada Package: libsmpp34-dev Source: libsmpp34 Version: 1.14.5.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 452 Depends: osmocom-nightly (= 202605271800), libsmpp1 (= 1.14.5.0.202605271800) Filename: ./armhf/libsmpp34-dev_1.14.5.0.202605271800_armhf.deb Size: 73652 MD5sum: 1dcc32ae67380cbf3ddef2a0ec651e0d SHA1: 7404b29d1ac1029340e93c8ccda08d9d9e25bb25 SHA256: 80305def6c0a96372979a1c363801b8a95ebbab49378ca3117da96f2b29ea86a Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libsmpp34 Description: Development files for libsmpp34 This library is an implementation for providing the PDU handling of the SMPP-3.4 protocol. SMPP (Short Message Peer-to-Peer) is an open industry standard protocol designed to provide a flexible data communication interface for the transfer of short message data between External Short Messaging Entities, Routing Entitites and Message Centres. . This package contains the development files for the library. Package: libsmpp34-utils Source: libsmpp34 Version: 1.14.5.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 10 Depends: osmocom-nightly (= 202605271800) Filename: ./armhf/libsmpp34-utils_1.14.5.0.202605271800_armhf.deb Size: 2916 MD5sum: 61d5ed45e5cb1f8227c5dd857729f897 SHA1: 967cd215ff62886eb4a83add5e6cac88d9d5ed38 SHA256: 5519bc57786a2fdd2e98a7eac61a89a8dfe30ddac35c652517d7af44bfcb7593 Section: libs Priority: optional Homepage: https://projects.osmocom.org/projects/libsmpp34 Description: Utilities for SMPP Package: libstrongswan Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2631 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.38), libcap2 (>= 1:2.10), libgmp10 (>= 2:6.3.0+dfsg), libsystemd0 (>= 227) Recommends: libstrongswan-standard-plugins Suggests: libstrongswan-extra-plugins Filename: ./armhf/libstrongswan_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 366472 MD5sum: 7c35a52fb24c98d5161b339d072deb25 SHA1: 8ccdd98c114a347395f76a76e003022441738259 SHA256: 025f014a64ed80047df08603ee9f43946cbec8527b8a77d9e7c9ef0b7e9cba5f Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan utility and crypto library The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides the underlying libraries of charon and other strongSwan components. It is built in a modular way and is extendable through various plugins. . Some default (as specified by the strongSwan projet) plugins are included. For libstrongswan (cryptographic backends, URI fetchers and database layers): - aes (AES-128/192/256 cipher software implementation) - constraints (X.509 certificate advanced constraint checking) - dnskey (Parse RFC 4034 public keys) - drbg (NIST SP-800-90A Deterministic Random Bit Generator) - fips-prf (PRF specified by FIPS, used by EAP-SIM/AKA algorithms) - gmp (RSA/DH crypto backend based on libgmp) - hmac (HMAC wrapper using various hashers) - md5 (MD5 hasher software implementation) - mgf1 (Mask Generation Functions based on the SHA-1, SHA-256 and SHA-512) - nonce (Default nonce generation plugin) - pem (PEM encoding/decoding routines) - pgp (PGP encoding/decoding routines) - pkcs1 (PKCS#1 encoding/decoding routines) - pkcs8 (PKCS#8 decoding routines) - pkcs12 (PKCS#12 decoding routines) - pubkey (Wrapper to handle raw public keys as trusted certificates) - random (RNG reading from /dev/[u]random) - rc2 (RC2 cipher software implementation) - revocation (X.509 CRL/OCSP revocation checking) - sha1 (SHA1 hasher software implementation) - sha2 (SHA256/SHA384/SHA512 hasher software implementation) - sshkey (SSH key decoding routines) - x509 (Advanced X.509 plugin for parsing/generating X.509 certificates/CRLs and OCSP messages) - xcbc (XCBC wrapper using various ciphers) - attr (Provides IKE attributes configured in strongswan.conf) - kernel-netlink [linux] (IPsec/Networking kernel interface using Linux Netlink) - kernel-pfkey [kfreebsd] (IPsec kernel interface using PF_KEY) - kernel-pfroute [kfreebsd] (Networking kernel interface using PF_ROUTE) - resolve (Writes name servers received via IKE to a resolv.conf file or installs them via resolvconf(8)) Package: libstrongswan-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 1628 Depends: libstrongswan (= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/libstrongswan-dbgsym_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 1411552 MD5sum: 7f656f6939d63e24ab327f89fdfc8e01 SHA1: 736be8c1ae854993f19ba56b94dedf262c882acc SHA256: 271470f5e23be3693fe0becb03b57cf725a12f92f08e59a2be1a1126348e59b3 Section: debug Priority: optional Description: debug symbols for libstrongswan Build-Ids: 06f97e0598992644fda2578b32e60a2bcc093228 08ed3744a26823d512502f647c7a0b7e74b2fe3f 0f1f366fc6761e76c88187076ddd8e8027120407 112a32389a6e390177e84ee675faa14ffd62951a 25bb583efdb6c3cfb239071e78ba8538272a497e 2ef7a0f67268c7ad50c3b3e1f3ad60ce0f55c4f5 3212556a30683e301b988d907f3fae7e7c2b6320 34973e48b3bb1e6efb0acd42622aa004ce37649c 3e15465712d5f2a7698a5c6f1b4dfe1c865b4429 42ad2e06f63f8c69a8119fccbd1980eaf3543d8c 42f03eeafbf3d3a30a922e0678c6e6aa5a9217f9 45fb19b30039dffdafb52e548c782ba748082e57 4aa5cbea3faebfd191f20925aef5f33cd5fc783f 6b5276b661c7c1afa36219255d323ac3596d5fcf 73b7a9efb377a7ccb8586b58546d26770c862dbd 9794d870cad556c721d2a272d8edc39e0e4ee3ed 9fdd3f552c4175b895cfcfc964d9f4ea2b37ea7b b876ce1b4e60a15848f9551c18d1636bdfc741ee c349e7b39f7744fb6bb7f9bb95b3d4ecb293d039 c470d3f1a96d7642a27fa059e220f03a950cf972 c49b365ff40efffe8a717b395ef19692916401c5 c783a1911e53edd098fa61299b856b83d6681398 d2cb7b64897c2578d9d841a59aad87133fe2acbf dabdeb6ea0128362314ea5b96eef750b7acdfd4c e15c7441b9a1a7fcf6d3b0bed8c478ec7beb5e20 ecd622f5db659b51fdc6d8bbca43e14ff0e6a622 eef754fbbba0411618d82fbec96342a52add6fcc f65365e9d6ac4ca07342e5c28ea1d6380faabaa1 fd9a50b7338b149a4bfb4389408f2e059f56d9ef Package: libstrongswan-extra-plugins Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1260 Depends: osmocom-nightly (= 202605271800), libstrongswan (= 2:0.1.2.osmo.epdg.0.202605271800), libc6 (>= 2.34), libcurl4t64 (>= 7.16.2), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.14), libldap2 (>= 2.6.2), libtss2-sys1t64 (>= 3.0.1) Breaks: libcharon-extra-plugins (<= 5.5.3-1) Replaces: libcharon-extra-plugins (<= 5.5.3-1) Filename: ./armhf/libstrongswan-extra-plugins_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 240188 MD5sum: cec1a473db71616a6ecdbd9e70f7770a SHA1: 423bf7b61177f1d4e0ed2f332bf13d699cc7a224 SHA256: 3019ba1e3be5319b9a708b649256c63514fb4bc6afce3b99c1b5ed3c18918909 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan utility and crypto library (extra plugins) The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides extra plugins for the strongSwan utility and cryptographic library. . Included plugins are: - af-alg [linux] (AF_ALG Linux crypto API interface, provides ciphers/hashers/hmac/xcbc) - ccm (CCM cipher mode wrapper) - cmac (CMAC cipher mode wrapper) - ctr (CTR cipher mode wrapper) - curl (libcurl based HTTP/FTP fetcher) - curve25519 (support for Diffie-Hellman group 31 using Curve25519 and support for the Ed25519 digital signature algorithm for IKEv2) - gcrypt (Crypto backend based on libgcrypt, provides RSA/DH/ciphers/hashers/rng) - ldap (LDAP fetching plugin based on libldap) - padlock (VIA padlock crypto backend, provides AES128/SHA1) - pkcs11 (PKCS#11 smartcard backend) - rdrand (High quality / high performance random source using the Intel rdrand instruction found on Ivy Bridge processors) - test-vectors (Set of test vectors for various algorithms) . Also included is the libtpmtss library adding support for TPM plugin (https://wiki.strongswan.org/projects/strongswan/wiki/TpmPlugin) Package: libstrongswan-extra-plugins-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 640 Depends: libstrongswan-extra-plugins (= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/libstrongswan-extra-plugins-dbgsym_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 525580 MD5sum: cc9c445f4ea59aa70164477eca78f037 SHA1: 1eb59f617e7b6d719151fd519276b8fff2f6e549 SHA256: 19460c66d6c327e9317ef630158c28a7b4371fbc1ed56fa66fe35c82090c2fd9 Section: debug Priority: optional Description: debug symbols for libstrongswan-extra-plugins Build-Ids: 47d5be67628880065a14c8f480c07e088a539669 76136b5ad819b0ff2bced592d54844b8ee371ae2 78adb4c8e65d6372d25dc2cdb76a9e468d22ea30 8f9def1cd80c3321e16d87a686cc7db7a119b6b2 90865d32cb2eb3b949f4854204cc54b75e88e721 a01a6f3a59dd67c3e88114a56f7615bd4d1afc32 adceb4cfdaa4f53a91896ebf2684eda82d1d5031 ae165493d9be40f7c30d65415d04743355b8f024 c1ab72e4987467d85eb6fd92e5d7049fa6e67b6b cadf6eef63fe7829eeb96829ffdc9f48a4178970 d1c906967c1821270e7337ac80d89e5488b7486e dd34029d97c70e0d3288e97102993eed9a0b2cd6 e2d381917e5dbeb31ff31b55a198c43011690589 e63a9aa3233635bcc9b9dd8512fbf229d43d3316 Package: libstrongswan-standard-plugins Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 491 Depends: osmocom-nightly (= 202605271800), libstrongswan (= 2:0.1.2.osmo.epdg.0.202605271800), libc6 (>= 2.34), libip4tc2 (>= 1.8.3), libssl3t64 (>= 3.0.0) Filename: ./armhf/libstrongswan-standard-plugins_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 107788 MD5sum: 0dd050ef12bee33cbe2c9654b62acc42 SHA1: 76b9dee08ea90674c1e79c2695c80d24fcf0b7b9 SHA256: 65ab94d93baa75cc3f155107108f685b8c6e421dd493a078d6b9a9ab04e1c938 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan utility and crypto library (standard plugins) The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides some common plugins for the strongSwan utility and cryptograhic library. . Included plugins are: - agent (RSA/ECDSA private key backend connecting to SSH-Agent) - gcm (GCM cipher mode wrapper) - openssl (Crypto backend based on OpenSSL, provides RSA/ECDSA/DH/ECDH/ciphers/hashers/HMAC/X.509/CRL/RNG) Package: libstrongswan-standard-plugins-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 297 Depends: libstrongswan-standard-plugins (= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/libstrongswan-standard-plugins-dbgsym_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 250540 MD5sum: 10772be4bbfb2760e37580beabf9eb76 SHA1: 94462d13d1b14bc95a091bde58c5de5944f64fe7 SHA256: 695a577edccc0c3db8290cc5971f3c1441b3cabcb21078ec25bcc3c779b13f4d Section: debug Priority: optional Description: debug symbols for libstrongswan-standard-plugins Build-Ids: 7c8f9d866c48bb2114d473850e646abca538dd15 7ea010ba6f7d0a3acc5e1d72264cfd08ebef6b73 d57d6f9dabf4e9f31d53744e80f01614d2ce775e ef1ca7b173369353dc269caf802287b9e3baeebc Package: libusrp-dev Source: libusrp Version: 3.4.11.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 162 Depends: osmocom-nightly (= 202605271800), libusrp1 (= 3.4.11.0.202605271800), libusb-1.0-0-dev Filename: ./armhf/libusrp-dev_3.4.11.0.202605271800_armhf.deb Size: 25648 MD5sum: 5521e3d3c608054138c6b18ab58015c1 SHA1: 00af4defd25eeaf575b61bd38233ced1fee9c1ef SHA256: 74219d94da429548af982c39af4a429b12df09140530efe3b137982cf9865804 Section: libdevel Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: gnuradio based driver library for the USRP1 SDR - dev files Package: libusrp-doc Source: libusrp Version: 3.4.11.0.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 327 Depends: osmocom-nightly (= 202605271800), libusrp1 (= 3.4.11.0.202605271800), libjs-jquery Filename: ./all/libusrp-doc_3.4.11.0.202605271800_all.deb Size: 81784 MD5sum: 5a112a03ea1253940cb4605edcb96684 SHA1: 1b014ad91bc28b6d291f2307bc22367d0c1b3bb9 SHA256: 37bb72b0ce06c0b009182c6d44e8001fac4ae64ee2d81573bcaa36547235e008 Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: Documentation for gnuradio based driver library for the USRP1 SDR Package: libusrp-firmware Source: libusrp Version: 3.4.11.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1799 Depends: osmocom-nightly (= 202605271800), libusrp1 (= 3.4.11.0.202605271800) Filename: ./armhf/libusrp-firmware_3.4.11.0.202605271800_armhf.deb Size: 741236 MD5sum: 49cc783445e8e32a0b085a56bfcb179c SHA1: 79085ee9a189b8b9032c8b36c918ac71bd50fb92 SHA256: 7028de66594a9f49949238c124eb25b5cd82cf282f2e97122cbf905893b38aa6 Section: libs Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: gnuradio based driver library for the USRP1 SDR - firmware files Package: libusrp-utils Source: libusrp Version: 3.4.11.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 143 Depends: osmocom-nightly (= 202605271800), libusrp1 (= 3.4.11.0.202605271800) Filename: ./armhf/libusrp-utils_3.4.11.0.202605271800_armhf.deb Size: 10924 MD5sum: 445212223e7e8f059f016432890721e9 SHA1: 68ac12a25ffe5fd81363b35f93cef5cc5ebb939b SHA256: cbdf4b85986a9d072de388fc05a2d99d06c5cb92c64112825f71ffc7622da723 Section: libs Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: gnuradio based driver library for the USRP1 SDR - several tools Package: libusrp-utils-dbgsym Source: libusrp Version: 3.4.11.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 104 Depends: libusrp-utils (= 3.4.11.0.202605271800) Filename: ./armhf/libusrp-utils-dbgsym_3.4.11.0.202605271800_armhf.deb Size: 66308 MD5sum: 453cafce45c4839b1dcb5e79a173ad73 SHA1: 4cb8e3e4499b8d2d402ae27dab6f88b14897b6e5 SHA256: cffe7e319741d0b5d41a442b61ea1a5257c0711d1f5b25eaa876d9568947a190 Section: debug Priority: optional Description: debug symbols for libusrp-utils Build-Ids: 72802a1c267bdf8df3b7abed70c0a7dcf257b677 b1855ebd4e2cc4c1054ba700e13827e2d518a350 Package: libusrp1 Source: libusrp Version: 3.4.11.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 465 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.38), libgcc-s1 (>= 3.5), libstdc++6 (>= 11), libusb-1.0-0 (>= 2:1.0.8) Filename: ./armhf/libusrp1_3.4.11.0.202605271800_armhf.deb Size: 102196 MD5sum: 49c0270a289670ecb14cfc0d25059956 SHA1: e6c7830d98904c9018edc1ccff2ba74e91c1db6a SHA256: eb5b80b0c113a6eb4a6075327fea0ebea43dd4697aa77ed7b97da48b8dd20f7b Section: libs Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: gnuradio based driver library for the USRP1 SDR Gnuradio removed libusrp as it switched to UHD support, including USRP1 devices. However, USRP1 on UHD doesn't support timestamps, so this library remains needed for applications that use timestamps such as osmo-trx. To find out how this library was forked from gnuradio, check libusrp.git commit description ec6adccbbdda1a4614089aaf52f9e1bab75494e7. Package: libusrp1-dbgsym Source: libusrp Version: 3.4.11.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 1252 Depends: libusrp1 (= 3.4.11.0.202605271800) Filename: ./armhf/libusrp1-dbgsym_3.4.11.0.202605271800_armhf.deb Size: 1125360 MD5sum: 86e074ed749b22711c7fdfb1ae2f08de SHA1: 3b87412bc8c1259b1e9da9521ea0796c01fc0892 SHA256: 97bf38dec98af6f599dfd81b244780d84f4448c6c1f6a42c215c1d4359393fa1 Section: debug Priority: optional Description: debug symbols for libusrp1 Build-Ids: 072bc51502418cb632398abdaeee611c4cb5854c Package: neocon Version: 1.0.2.12.36dc.202605271800 Architecture: armhf Maintainer: Harald Welte Installed-Size: 75 Depends: libc6 (>= 2.34) Filename: ./armhf/neocon_1.0.2.12.36dc.202605271800_armhf.deb Size: 6008 MD5sum: b1bd6791e6cfbe745eaf673f89884089 SHA1: c18577030cee3d345b756cdf5d48a8df817a21fd SHA256: 48a10b5752b04547e2898c065f177cf6eecc421c71eaf9c5e650be3a9b2751bd Section: net Priority: extra Multi-Arch: same Homepage: https://github.com/openmoko/neocon Description: Simple serial console utility with re-open-after-disconnect Package: neocon-dbgsym Source: neocon Version: 1.0.2.12.36dc.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Harald Welte Installed-Size: 29 Depends: neocon (= 1.0.2.12.36dc.202605271800) Filename: ./armhf/neocon-dbgsym_1.0.2.12.36dc.202605271800_armhf.deb Size: 7308 MD5sum: 3389a6e1f9a1e4b2a4fd5c3137f683fc SHA1: 483654c7c9f4740207112ab749c75a47b8010b06 SHA256: e69f349d322f300a33823f8345ab48187e8eeb5c769238ea57d1b253eee54f5c Section: debug Priority: optional Multi-Arch: same Description: debug symbols for neocon Build-Ids: cb6fff58c89e08d0c70c40d69b5d32143535c04b Package: osmo-bsc Version: 1.14.0.38.1245.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1733 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmo-mgcp-client14, libosmo-sigtran12, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-mgw Filename: ./armhf/osmo-bsc_1.14.0.38.1245.202605271800_armhf.deb Size: 544340 MD5sum: d0d36f4e67993edbefba8b9c1a93714c SHA1: f9d6482cbab4ac0ab396a874ad502bec9fd9b25d SHA256: 78be7cf0deb3d28fc3bfc632d0a22cd9ae5d942d3977b376d2ea3bcdb48baec6 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: OsmoBSC: Osmocom's Base Station Controller for 2G circuit-switched mobile networks Package: osmo-bsc-bs11-utils Source: osmo-bsc Version: 1.14.0.38.1245.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 8159 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmo-mgcp-client14, libosmo-sigtran12, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bsc-bs11-utils_1.14.0.38.1245.202605271800_armhf.deb Size: 2293472 MD5sum: d2645155d4071711f1b7ca895d06292c SHA1: dd19e957e30220d927909a84fcb3abbccb2aa3d4 SHA256: 33e082d1ca5b6cb9ab79864dc46fff7b257850ea1b4ee32e0d27e5aea57b258e Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: Command line utilities for Siemens BS-11 BTS There is a tool in this package for configuring the Siemens BS-11 BTS. Additionally, it contains one tool for making use of an ISDN-card and the public telephone network as frequency standard for the E1 line. Package: osmo-bsc-dbg Source: osmo-bsc Version: 1.14.0.38.1245.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 4927 Depends: osmocom-nightly (= 202605271800), osmo-bsc (= 1.14.0.38.1245.202605271800) Filename: ./armhf/osmo-bsc-dbg_1.14.0.38.1245.202605271800_armhf.deb Size: 3286612 MD5sum: 17fc18a23057fc3a9361ca2941598ff2 SHA1: be5a28c0172a92fd4c8fc577f5893a0bd2c05c5e SHA256: 6b352b4b3fd6536e01e3f72afe81dd3053d2f22c2406a5ebccb8b0d06c4bc2fb Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: OsmoBSC: Osmocom's Base Station Controller for 2G circuit-switched mobile networks Build-Ids: f6742217694982393f354eb8f712d693754e3123 Package: osmo-bsc-doc Source: osmo-bsc Version: 1.14.0.38.1245.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 2406 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-bsc-doc_1.14.0.38.1245.202605271800_all.deb Size: 2263068 MD5sum: 826c3f246f7358c3242b0781987e5ab7 SHA1: fb8cd2016d14766877e8619320d9b6e01d93eaa4 SHA256: 7ef5a62d51ff092781880eefa9bb2784e680f38287402d61023f3e2e09386e8b Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-bsc-ipaccess-utils Source: osmo-bsc Version: 1.14.0.38.1245.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 16043 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmo-mgcp-client14, libosmo-sigtran12, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bsc-ipaccess-utils_1.14.0.38.1245.202605271800_armhf.deb Size: 3420548 MD5sum: 19ab02fc1fce7136a1530ffd5faf506f SHA1: 8f6874a0787176534e58dfcabe7e52ec9f97eeb7 SHA256: 8fd39d02b1ecb5b7424dc71d167d59687681fedef8ad83dc758daa8893acf90f Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: Command line utilities for ip.access nanoBTS This package contains utilities that are specific for nanoBTS when being used together with OpenBSC. It contains mainly two tools: ipaccess-config and ipaccess-proxy. Package: osmo-bsc-meas-utils Source: osmo-bsc Version: 1.14.0.38.1245.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 8046 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libcdk5t64 (>= 5.0.20190303), libncurses6 (>= 6), libosmo-mgcp-client14, libosmo-sigtran12, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213), libtinfo6 (>= 6) Filename: ./armhf/osmo-bsc-meas-utils_1.14.0.38.1245.202605271800_armhf.deb Size: 2268880 MD5sum: 6ecaa9b18ea2d1157bad8aeae4464e60 SHA1: a3de9bb10359b15aa1a542eb4c02f2b1a7d9b3ac SHA256: 2044546e1ced7eac1c494c737bd24752359e612dedfd51535a2065ea2a2d98e5 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: Command line utilities to manage measurement reports. Package: osmo-bsc-nat Version: 0.1.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 90 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmo-mgcp-client14, libosmo-sigtran12, libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bsc-nat_0.1.0.0.202605271800_armhf.deb Size: 18884 MD5sum: 3f2d193a28291b8c8e59a2c9e2649cc2 SHA1: a24c22cae738498270c01300f24dbb5e977d73c8 SHA256: ac131c9e7fc61b527aff125af57af0b54f32669e4186ac1c75dda3d130c851d3 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc-nat Description: OsmoBSCNAT masquerades multiple BSCs behind one Package: osmo-bsc-nat-dbg Source: osmo-bsc-nat Version: 0.1.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 147 Depends: osmocom-nightly (= 202605271800), osmo-bsc-nat (= 0.1.0.0.202605271800) Filename: ./armhf/osmo-bsc-nat-dbg_0.1.0.0.202605271800_armhf.deb Size: 86308 MD5sum: 1ed08486a7cc4023657a16fcd61f0410 SHA1: 4a06052b2dc4f5f2e0e36fffbab483f92dffb401 SHA256: a8beaff5e23e2d9618d57e70f3fe04d8d9bf755db72be728af2836d50b0c5027 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-bsc-nat Description: OsmoBSCNAT masquerades multiple BSCs behind one Build-Ids: 3b62c4ffbc7ff5a1c6261edb661678f15cf91182 Package: osmo-bsc-nat-doc Source: osmo-bsc-nat Version: 0.1.0.0.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 8 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-bsc-nat-doc_0.1.0.0.202605271800_all.deb Size: 1916 MD5sum: e0bcfc27526870c217764405718d4f17 SHA1: 2fd2a3d9ba9e67ecdadc66bea688c45e5edcf575 SHA256: 5f812521cc072c2e8f820cbf0a75854ae1e0dcfce3fdaf4472fbf17f55a6bbc2 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-bsc-nat Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-bts Version: 1.11.0.23.b4ff.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 41 Depends: osmocom-nightly (= 202605271800), osmo-bts-trx, osmo-bts-virtual Filename: ./armhf/osmo-bts_1.11.0.23.b4ff.202605271800_armhf.deb Size: 34648 MD5sum: 2dcf511f61896d3039c8dc3b494976c9 SHA1: c25d3fd4a44e56a245204beffab5ef063aa16ed5 SHA256: 1029967dec106ff23d1d721d6a5b3e7a411f29965b7a59317bc817f475f15f31 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmobts Description: Base Transceiver Station for GSM OsmoBTS is a software implementation of Layer2/3 of a BTS. It implements the following protocols/interfaces: LAPDm (GSM 04.06) RTP A-bis/IP in IPA multiplex OML (GSM TS 12.21) RSL (GSM TS 08.58) . OsmoBTS is modular and has support for multiple back-ends. A back-end talks to a specific L1/PHY implementation of the respective BTS hardware. Based on this architecture, it should be relatively easy to add a new back-end to support so-far unsupported GSM PHY/L1 and associated hardware. Package: osmo-bts-doc Source: osmo-bts Version: 1.11.0.23.b4ff.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 1913 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-bts-doc_1.11.0.23.b4ff.202605271800_all.deb Size: 1770556 MD5sum: 04088dc672e163b84aa306f3a9ec7b60 SHA1: 3bffe5f49d76c8e21da665bd92f7d4e04473646b SHA256: 2085c839c97133761e50863b270a2a1a270c4dca13295b7ee02dc48c2a8131c7 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmobts Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-bts-trx Source: osmo-bts Version: 1.11.0.23.b4ff.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 582 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmoabis15, libosmocodec4, libosmocoding0, libosmocore22, libosmoctrl0, libosmogsm20, libosmoisdn0, libosmonetif11, libosmotrau11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bts-trx_1.11.0.23.b4ff.202605271800_armhf.deb Size: 206912 MD5sum: 82ac043fe8c1c901da31305ed7f0ea29 SHA1: 170d5a0b7099f792f1c3f0e2084bf96ca46b3cf2 SHA256: ec063d3d2baf4a370a32842596e2d5e2be9716e8eb9464e025cf1e26b68176e2 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmobts Description: osmo-bts-trx GSM BTS with osmo-trx osmo-bts-trx to be used with the osmo-trx application Package: osmo-bts-trx-dbg Source: osmo-bts Version: 1.11.0.23.b4ff.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1793 Depends: osmocom-nightly (= 202605271800), osmo-bts-trx (= 1.11.0.23.b4ff.202605271800) Filename: ./armhf/osmo-bts-trx-dbg_1.11.0.23.b4ff.202605271800_armhf.deb Size: 1261164 MD5sum: 0317459ca081e93046cba380cb240b64 SHA1: a7c80cbb3c050e39e95aef6bd48a208690e33095 SHA256: ef68835e71bf1c1d822304854ee49a3722e83256a5a3b58f823673dcfd6daf0d Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmobts Description: Debug symbols for the osmo-bts-trx Make debugging possible Build-Ids: f62e99f9aa3590ea3955dc7bc64bfdd9f5796b08 Package: osmo-bts-virtual Source: osmo-bts Version: 1.11.0.23.b4ff.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 906 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmoabis15, libosmocodec4, libosmocore22, libosmoctrl0, libosmogsm20, libosmoisdn0, libosmonetif11, libosmotrau11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bts-virtual_1.11.0.23.b4ff.202605271800_armhf.deb Size: 204556 MD5sum: dddb8673181d2ccc640d448453c29702 SHA1: 039be95c19893968a4e670c509510fc00928717b SHA256: 638932565dba3c7197df60fb6974e3f85f3ee6277b40271fa6ed9057efacc455 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmobts Description: Virtual Osmocom GSM BTS (no RF hardware; GSMTAP/UDP) This version of OsmoBTS doesn't use actual GSM PHY/Hardware/RF, but utilizes GSMTAP-over-UDP frames for the Um interface. This is useful in fully virtualized setups e.g. in combination with OsmocomBB virt_phy. Package: osmo-bts-virtual-dbg Source: osmo-bts Version: 1.11.0.23.b4ff.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2817 Depends: osmocom-nightly (= 202605271800), osmo-bts-virtual (= 1.11.0.23.b4ff.202605271800) Filename: ./armhf/osmo-bts-virtual-dbg_1.11.0.23.b4ff.202605271800_armhf.deb Size: 1998044 MD5sum: 1fe4a26ecfa8b5008212735abaff5c11 SHA1: cfb48ce933009c6d6c9f5e1a2ae2643b02bea488 SHA256: 4576dbfadfa58a0aafa2624bdfedaa1ce1567f81858019fa178e0abc4640f391 Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmobts Description: Debug symbols for the osmo-bts-virtual Make debugging possible Build-Ids: 10493e7e88d7cea0706acc85085581221f097ebd df6e29cfa6d0c673774fd0391e47161bb2635090 Package: osmo-cbc Version: 0.5.3.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 160 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libjansson4 (>= 2.14), libosmo-sbcap2, libosmocore22, libosmogsm20, libosmonetif11, libosmovty13, libsctp1 (>= 1.0.10+dfsg), libtalloc2 (>= 2.0.4~git20101213), libulfius2.7t64 (>= 2.7.0) Filename: ./armhf/osmo-cbc_0.5.3.0.202605271800_armhf.deb Size: 39016 MD5sum: aa70761822ea6e4c7d28d83d836a8ca3 SHA1: 3c8c6c2d2fe426518692bd165167d14e98055451 SHA256: e083983788572609c0fc34676b09a86b947a3bbf1feced1b99c42dff45ef8303 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: OsmoCBC: Osmocom's Cell Broadcast Center Package: osmo-cbc-dbg Source: osmo-cbc Version: 0.5.3.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 328 Depends: osmocom-nightly (= 202605271800), osmo-cbc (= 0.5.3.0.202605271800) Filename: ./armhf/osmo-cbc-dbg_0.5.3.0.202605271800_armhf.deb Size: 216528 MD5sum: 8f8ea99de186093da40a6dbd8b9ff927 SHA1: d4b3032aac477b07866386ca739f89a6d167e0d9 SHA256: 0e04c2cd83cb2b7b93a62b7879059bc446b85e65f5192cc6bcd71d7298a169ef Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: OsmoCBC: Osmocom's Cell Broadcast Center Build-Ids: 115074e6771d1dffbd9bf99bc1019e6d1445c178 Package: osmo-cbc-doc Source: osmo-cbc Version: 0.5.3.0.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 650 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-cbc-doc_0.5.3.0.202605271800_all.deb Size: 627108 MD5sum: 30b1b76ebce12363fcae8cb3d21563bd SHA1: 8fa3730ae62425bb6cbeac28e2998f1e27effa79 SHA256: 304be6e28a14619bbc57a87ad7e892f33dd814063540bee07cfeb6753a52c3ef Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-cbc-utils Source: osmo-cbc Version: 0.5.3.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 18 Depends: osmocom-nightly (= 202605271800), python3 Filename: ./armhf/osmo-cbc-utils_0.5.3.0.202605271800_armhf.deb Size: 7108 MD5sum: 60d38920747a4196bcce09a58fa52086 SHA1: 242150865c0cb315eba578b8a0f88cc12eb85c39 SHA256: c22201e32d30a452d3b7f04c49b53dd3b0c8fe140c0dbac119f112febec288c3 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: Utilities for OsmoCBC: Osmocom's Cell Broadcast Center Package: osmo-e1d Version: 0.7.2.2.1097.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 94 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.38), libosmo-e1d3, libosmo-octoi3, libosmocore22, libosmousb0, libosmovty13, libtalloc2 (>= 2.0.4~git20101213), libusb-1.0-0 (>= 2:1.0.16) Filename: ./armhf/osmo-e1d_0.7.2.2.1097.202605271800_armhf.deb Size: 31816 MD5sum: 1d5f937f905e72a21d5fbf014f07b695 SHA1: cd774eeb73e8c59acd608438597f703c05fa2212 SHA256: 3a0a9f6deadefc191c5281a9982bdd5c0603ba2abb9216bd7efea3e4db90ec5a Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: osmo-e1d: Osmocom's E1 interface daemon Package: osmo-e1d-dbgsym Source: osmo-e1d Version: 0.7.2.2.1097.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 174 Depends: osmo-e1d (= 0.7.2.2.1097.202605271800) Filename: ./armhf/osmo-e1d-dbgsym_0.7.2.2.1097.202605271800_armhf.deb Size: 99944 MD5sum: 870bd1e3681e52c9dae5bf14b814291e SHA1: 518490b192b182685c127e72ad66ca33fe8de186 SHA256: 0680fcbe5ae8dc08d2cde973e564aa4b638ca0336a1ee21c521eb4a9c590263c Section: debug Priority: optional Description: debug symbols for osmo-e1d Build-Ids: 0015fdd46a452d4a88bbf76a7fcdef361f526e38 Package: osmo-fl2k Version: 0.2.1.1.3706.202605271800 Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 283 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmo-fl2k0 Filename: ./armhf/osmo-fl2k_0.2.1.1.3706.202605271800_armhf.deb Size: 18012 MD5sum: 1610c290aac917c9543b2000a83e1cdc SHA1: 3660964de5f8074b46ed172db5001729de459ba9 SHA256: bc384420bd0d1c9af224169c241b0f5630a21d26458519df0b5575be70245dc9 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-fl2k Description: use a VGA USB adapter as DAC and SDR transmitter This software allows one to use USB 3.0 to VGA adapters based on the Fresco Logic FL2000 chip as general purpose DACs and SDR transmitter generating a continuous stream of samples by avoiding the HSYNC and VSYNC blanking intervals. Package: osmo-fl2k-dbgsym Source: osmo-fl2k Version: 0.2.1.1.3706.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 101 Depends: osmo-fl2k (= 0.2.1.1.3706.202605271800) Filename: ./armhf/osmo-fl2k-dbgsym_0.2.1.1.3706.202605271800_armhf.deb Size: 42192 MD5sum: 7403f50d1933d278089b0d7255737931 SHA1: e6093e34466e99f80cd9dd6790144ccde6391ddd SHA256: f1d8e144efcabba018a6cb03a09b5b4fa9d21640b5646dd9abd71e424f32c93e Section: debug Priority: optional Description: debug symbols for osmo-fl2k Build-Ids: 38055c300e1241bf42344b5888e90cbbc73f06b2 901372ad1894a04e0716a3b98e811e2df3fc8d41 afc38678bb01f86580dae1cbb779b1f6ee224b3b b7e24df5f8cfa652d1e07189b2372538cb64cfd1 Package: osmo-gbproxy Version: 1:0.5.1.1.422ff.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 166 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmocore22, libosmoctrl0, libosmogb14, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-sgsn Filename: ./armhf/osmo-gbproxy_0.5.1.1.422ff.202605271800_armhf.deb Size: 39508 MD5sum: fd1025f711cb2ee8d9401eaec06b6181 SHA1: da4aa84ac0ec3faffa323d98a65197c206eb08af SHA256: fa06f32f791e0e5cc135cc28e75f1d6aabf6cf19e88ba7c422e1ed5d080d499c Section: net Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-gbproxy Description: Osmocom GPRS Gb Interface Proxy The purpose of the Gb proxy is to aggregate the Gb links of multiple BSS's and present them in one Gb link to the SGSN. Package: osmo-gbproxy-dbg Source: osmo-gbproxy Version: 1:0.5.1.1.422ff.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 221 Depends: osmocom-nightly (= 202605271800), osmo-gbproxy (= 1:0.5.1.1.422ff.202605271800) Filename: ./armhf/osmo-gbproxy-dbg_0.5.1.1.422ff.202605271800_armhf.deb Size: 122288 MD5sum: e4796df24ce67d4f5fdcc9d5fd64c137 SHA1: 8db5795d161d8db630da18f997411ae343c04047 SHA256: 287b0026f5b9ab696ebfbdcf9753d6a594d1682ba9bd72e51877307b8ca20d16 Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-gbproxy Description: Debug symbols for Osmocom GPRS Gb Interface Proxy Build-Ids: 5a5579297cf67a747e800b5503ee7f2600ed7281 Package: osmo-gbproxy-doc Source: osmo-gbproxy Version: 1:0.5.1.1.422ff.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 1039 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-gbproxy-doc_0.5.1.1.422ff.202605271800_all.deb Size: 973640 MD5sum: 8cd8dc2d6687f2695d705a2f75d67bf3 SHA1: 5df379ee78fca7c263b92d9adbc34dca9553c0eb SHA256: 30a1f7f8044bed26fcd4dbcf0e4dd464014728993d90c62cb6562460dcc71378 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-gbproxy Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-ggsn Version: 1.14.0.1.2016.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 316 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.38), libgtp11 (>= 1.13.0), libgtpnl0, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-ggsn_1.14.0.1.2016.202605271800_armhf.deb Size: 72660 MD5sum: a38786fc3c44fa2fc6552c0fcfd45da6 SHA1: 1d73c8751388aa313c5a3ab2984dab3cb7f21d8d SHA256: 686c46624b5643dc98024beb48e0f3da3189d3f88227215b8198dfbf7e89bc8d Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/openggsn Description: Osmocom Gateway GPRS Support Node (GGSN) OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. Package: osmo-ggsn-dbg Source: osmo-ggsn Version: 1.14.0.1.2016.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 446 Depends: osmocom-nightly (= 202605271800), libgtp11 (= 1.14.0.1.2016.202605271800), osmo-ggsn (= 1.14.0.1.2016.202605271800) Filename: ./armhf/osmo-ggsn-dbg_1.14.0.1.2016.202605271800_armhf.deb Size: 262700 MD5sum: f45319d6c2f7653e8d08f9f92e21fe04 SHA1: 2498550b526f678656254c7c22610df3ad789c22 SHA256: 4cd8308713f038f2a0451dab1e6ec39b2771f00fac2b12c526f55a894e3830ee Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: Debug symbols for OsmoGGSN OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. Build-Ids: 0fbe40b6593895c1e44dfedede14284a998562b7 994f90814b411b0613fd8bbc34a92c2dbd322b5f Package: osmo-ggsn-doc Source: osmo-ggsn Version: 1.14.0.1.2016.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 837 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-ggsn-doc_1.14.0.1.2016.202605271800_all.deb Size: 790584 MD5sum: 851dddf1dd104888671e29fd6503aea4 SHA1: 6555d6ab0687c76a2d12d1cfa02ac0ea982ba941 SHA256: b76601bc0536bb11cb45d4252073a134854d18ed3ef2eda10662f28fa0e42553 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/openggsn Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-gsm-manuals-dev Version: 1.7.0.6.96fe.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 870 Depends: osmocom-nightly (= 202605271800), asciidoc, asciidoc-dblatex, dblatex, docbook5-xml, graphviz, librsvg2-bin, libxml2-utils, mscgen, python3-nwdiag, xsltproc Filename: ./all/osmo-gsm-manuals-dev_1.7.0.6.96fe.202605271800_all.deb Size: 443168 MD5sum: 29520bcbe4488f4731ed44b2facadba2 SHA1: 1c67d77f6701253e1a55fe4460b3e39d40e91737 SHA256: c8adb589d12d3cfe484ff5cbb34d29e8bd17646a1d3cfc34b6f52f1742dca111 Section: devel Priority: optional Homepage: https://git.osmocom.org/osmo-gsm-manuals/ Description: Osmocom manuals shared code All Osomocom repositories require this package to build their manuals. Package: osmo-gtphub Source: osmo-sgsn Version: 1.14.0 Architecture: armhf Maintainer: Osmocom team Installed-Size: 181 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libcares2 (>= 1.7.1), libgtp11 (>= 1.13.0), libosmo-sigtran12, libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-gtphub_1.14.0_armhf.deb Size: 44796 MD5sum: 8cbb2bbe3e4ebbcad9c41005467855d4 SHA1: 554e351386dd2853688837ecc6e29a9ce9e58c7f SHA256: aa2ac6cf44bde0084f633673cebde19255e742c2ddeecb71065a570ce2e74004 Section: net Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: Osmocom GTP Hub: Proxy for GTP traffic between multiple SGSNs and GGSNs Package: osmo-gtphub-dbg Source: osmo-sgsn Version: 1.14.0 Architecture: armhf Maintainer: Osmocom team Installed-Size: 243 Depends: osmocom-nightly (= 202605271800), osmo-gtphub (= 1.14.0) Filename: ./armhf/osmo-gtphub-dbg_1.14.0_armhf.deb Size: 146932 MD5sum: 3129069cbfe311b5eb5ebbe0de19d97e SHA1: d1fedd2e41ec4462f59459f94279f61ac100a53f SHA256: 095e7d92de05f822ead6d3bc1e80e44ca6ac7e2768490361095c91816dcb6057 Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: Debug symbols for Osmocom GTP Hub Build-Ids: 57a9e8beea17f981eb82c139fe79ef17274903e9 Package: osmo-hlr Version: 1.9.2.2.459a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 368 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmo-gsup-client0, libosmo-mslookup1, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libsqlite3-0 (>= 3.10.0), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-hlr_1.9.2.2.459a.202605271800_armhf.deb Size: 87772 MD5sum: 3713aa82f8e879b059f514769f2d02db SHA1: 7572d0118eec0cf45d7260ccb47495ad2011270c SHA256: b492e4a2729991be584bc36aebce7ad9da6882e0a18caccc9377b236bf09fd4b Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Osmocom Home Location Register OsmoHLR is a Osmocom implementation of HLR (Home Location Registrar) which works over GSUP protocol. The subscribers are store in sqlite DB. It supports both 2G and 3G authentication. Package: osmo-hlr-dbg Source: osmo-hlr Version: 1.9.2.2.459a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 814 Depends: osmocom-nightly (= 202605271800), osmo-hlr (= 1.9.2.2.459a.202605271800) Filename: ./armhf/osmo-hlr-dbg_1.9.2.2.459a.202605271800_armhf.deb Size: 467688 MD5sum: b6486dcdadcd248823d47ce774edd24b SHA1: 7b8b3d4b6d0b2d1da89246abb79d64fcfdf024f0 SHA256: 8651c08d242cef9a24233d94da8aafcbbf9c3a9ee408ffa944285464efbe364b Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Debug symbols for the osmo-hlr Make debugging possible Build-Ids: 251eb26a30d462aed69e98fa0f744822f1d3a6f6 3f1ee743a73f2cfbd5807f07f7a962dc62e70c11 5d8df52db8d108e3b94204c0e9f14dfe561fe0de abbd6e78c9eb5de7f40ee36303c704f5c56e0231 c55415c31c3593eb92cd01977e49c768cbcace1d Package: osmo-hlr-doc Source: osmo-hlr Version: 1.9.2.2.459a.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 1290 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-hlr-doc_1.9.2.2.459a.202605271800_all.deb Size: 1211092 MD5sum: c2fe4bf74eeb86783dd268b6893c058d SHA1: 63f1a91813e8f9667e5b551d9fa3a27195dd27b3 SHA256: 118ea209446ad9a404810f444d0015cbe32d01affe1f9e0c9a4fb37fe715f7b4 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-hnbgw Version: 1.8.0.3.520f.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 363 Depends: osmocom-nightly (= 202605271800), libasn1c1, libc6 (>= 2.34), libnftables1 (>= 1.0.2), libosmo-hnbap0, libosmo-mgcp-client14, libosmo-pfcp4, libosmo-ranap7, libosmo-rua0, libosmo-sigtran12, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-mgw Filename: ./armhf/osmo-hnbgw_1.8.0.3.520f.202605271800_armhf.deb Size: 104424 MD5sum: 3953daaff42c6e0aa36de22d75dbb0bd SHA1: febd96ced2c86418c3840bc56b89dcb1e5ba9a6c SHA256: 4d15659a3386e835a6d588c16e4143de12b623e9d875857a340174e7918b0e77 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-hnbgw Description: OsmoHNBGW: Osmocom Home Node B Gateway Package: osmo-hnbgw-dbg Source: osmo-hnbgw Version: 1.8.0.3.520f.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 822 Depends: osmocom-nightly (= 202605271800), osmo-hnbgw (= 1.8.0.3.520f.202605271800) Filename: ./armhf/osmo-hnbgw-dbg_1.8.0.3.520f.202605271800_armhf.deb Size: 528792 MD5sum: d39efdeb0e76ce39d6e4fbe312cd3b02 SHA1: 031a44e188f3db5f88d094b07156089cdf954aaf SHA256: c724d3b98cc4c5a8dc3438c99140207cc0967dc3d3fe8b6da535bb0bf6d43d47 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hnbgw Description: OsmoHNBGW: Osmocom Home Node B Gateway Build-Ids: eceadafb4c3a357ede1ec106b93893a6d5fbe14f Package: osmo-hnbgw-doc Source: osmo-hnbgw Version: 1.8.0.3.520f.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 930 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-hnbgw-doc_1.8.0.3.520f.202605271800_all.deb Size: 885244 MD5sum: 3f1d70209e14d4f9ecccce8be5ec33b3 SHA1: 5231b4076fa85964c123f21debcb46ff792b94f3 SHA256: cc2126267a35729a663841dee7accdde5b591a462707cc635d962129378d3736 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-hnbgw Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-hnodeb Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 158 Depends: osmocom-nightly (= 202605271800), libasn1c1, libc6 (>= 2.34), libosmo-hnbap0, libosmo-ranap7, libosmo-rua0, libosmocore22, libosmogsm20, libosmonetif11, libosmotrau11, libosmovty13, libsctp1 (>= 1.0.10+dfsg), libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-mgw Filename: ./armhf/osmo-hnodeb_0.2.1.0.202605271800_armhf.deb Size: 31536 MD5sum: 4ebf59155920f981a9bb4fa455495a62 SHA1: 2a2f2a31e86ec73eaa2edde5c34d821f5d5bb202 SHA256: ae66072dbc5a584eea57cc26f8b8b61c193dfbc9890760df62bef771074fa294 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-hnodeb Description: OsmoHNodeB: Osmocom's Home NodeB for 3G mobile networks Package: osmo-hnodeb-dbg Source: osmo-hnodeb Version: 0.2.1.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 227 Depends: osmocom-nightly (= 202605271800), osmo-hnodeb (= 0.2.1.0.202605271800) Filename: ./armhf/osmo-hnodeb-dbg_0.2.1.0.202605271800_armhf.deb Size: 134728 MD5sum: a23cd3976f4453a16aad790c4dd0a315 SHA1: ad5c7cdabbb47533064f8414ec6f351f8c4b54aa SHA256: 3772ac0400fb9dc78bb81a75368cf2086e460de28ff4f21a38e291ae21c9e37e Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hnodeb Description: OsmoHNodeB: Osmocom's Home NodeB for 3G mobile networks Build-Ids: adc7aa4afcfeb9863fd9c24057269b12ad8ffe06 Package: osmo-hnodeb-doc Source: osmo-hnodeb Version: 0.2.1.0.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 10 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-hnodeb-doc_0.2.1.0.202605271800_all.deb Size: 4076 MD5sum: 5be247d64d505223dd0ea03cf374a397 SHA1: dacc7d573ed41954fead43ed0b1f45d783dc1d46 SHA256: 041d5ae45dfbbb10a8babb9c5eef59cefaff374b914bc02c20873906a90a6c02 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-hnodeb Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-mgw Version: 1.15.0.1.8afba.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 239 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmoabis15, libosmocodec4, libosmocore22, libosmoctrl0, libosmogsm20, libosmoisdn0, libosmonetif11, libosmotrau11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-mgw_1.15.0.1.8afba.202605271800_armhf.deb Size: 80264 MD5sum: 591e5ac9199f63a56f525f337db2346b SHA1: 3d2a7808d02cc608ed1eecfb0f23c61db18da0a5 SHA256: f33d7cba961a3a74719eebdd4a6648d67af5397d5b12cf2b2c5f4fec686b1900 Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/projects/osmo-mgw Description: OsmoMGW: Osmocom's Media Gateway for 2G and 3G circuit-switched mobile networks Package: osmo-mgw-dbgsym Source: osmo-mgw Version: 1.15.0.1.8afba.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 482 Depends: osmo-mgw (= 1.15.0.1.8afba.202605271800) Filename: ./armhf/osmo-mgw-dbgsym_1.15.0.1.8afba.202605271800_armhf.deb Size: 284484 MD5sum: 56f3d5d02a6602ed0a199e8bcac69da0 SHA1: 1529966d30aca09b9bb30afb8051f52fab70a66d SHA256: 52d6cb65c8bc66723d9800accdbc22721598842b93fd57630d96a888923717dd Section: debug Priority: optional Description: debug symbols for osmo-mgw Build-Ids: 5ddceac7e6fff96798f868f940af46d7dca098fc Package: osmo-mgw-doc Source: osmo-mgw Version: 1.15.0.1.8afba.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 932 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-mgw-doc_1.15.0.1.8afba.202605271800_all.deb Size: 884468 MD5sum: 8f91ea26b5f1b6eb73f9f42bdb4f3682 SHA1: bebc5cab5b283cf6e7ed6987a02ae516b9fb110e SHA256: 7859221109cb72b42c8568a5f5ad0f897e749c3a924dc5d3d5fea8cb0fead5eb Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmo-mgw Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-msc Version: 1.15.0.6.97eea.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 914 Depends: osmocom-nightly (= 202605271800), libasn1c1, libc6 (>= 2.34), libosmo-gsup-client0, libosmo-mgcp-client14, libosmo-ranap7, libosmo-sigtran12, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libsctp1 (>= 1.0.10+dfsg), libsmpp1, libsqlite3-0 (>= 3.6.23), libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-mgw Filename: ./armhf/osmo-msc_1.15.0.6.97eea.202605271800_armhf.deb Size: 276604 MD5sum: cb7029dbd8b3401fea178067326e8fb8 SHA1: 6d5c688a431319e15df854ead073e0b34f274529 SHA256: 59370d7a108fd274ac402087980ea40497dc1b62a1f961258dd9fd297681286b Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/projects/osmomsc Description: OsmoMSC: Osmocom's Mobile Switching Center for 2G and 3G circuit-switched mobile networks The Mobile Switching Center (MSC) is the heart of 2G/3G circuit-switched services. It terminates the A-interface links from the Base Station Controllers (BSC) and handles the MM and CC sub-layers of the Layer 3 protocol from the phones (MS). . This Osmocom implementation of the MSC handles A interfaces via 3GPP AoIP in an ASP role. It furthermore implements IETF MGCP against an external media gateway, such as OsmoMGW. It does *not* implement MAP towards a HLR, but the much simpler Osmocom GSUP protocol, which can be translated to MAP if needed. Package: osmo-msc-dbg Source: osmo-msc Version: 1.15.0.6.97eea.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2377 Depends: osmocom-nightly (= 202605271800), osmo-msc (= 1.15.0.6.97eea.202605271800) Filename: ./armhf/osmo-msc-dbg_1.15.0.6.97eea.202605271800_armhf.deb Size: 1530172 MD5sum: 5821b7375096cf5b534170affbac6c0c SHA1: 5ed51d12a42f362f321d8ff2b91b4e35882c594c SHA256: 1fa6d1c8f60b3b4dde13ab24032f6a9647c69dfcffef629fb11b545befe4fd2e Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/osmomsc Description: OsmoMSC: Osmocom's Mobile Switching Center for 2G and 3G circuit-switched mobile networks The Mobile Switching Center (MSC) is the heart of 2G/3G circuit-switched services. It terminates the A-interface links from the Base Station Controllers (BSC) and handles the MM and CC sub-layers of the Layer 3 protocol from the phones (MS). . This Osmocom implementation of the MSC handles A interfaces via 3GPP AoIP in an ASP role. It furthermore implements IETF MGCP against an external media gateway, such as OsmoMGW. It does *not* implement MAP towards a HLR, but the much simpler Osmocom GSUP protocol, which can be translated to MAP if needed. . This package contains the debug symbols for osmo-msc in order to generate meaningful backtraces in bug-reports. Build-Ids: b7b864b3b4e86da4d60ef52d5be394347e0ca898 Package: osmo-msc-doc Source: osmo-msc Version: 1.15.0.6.97eea.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 1666 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-msc-doc_1.15.0.6.97eea.202605271800_all.deb Size: 1562792 MD5sum: d0dc8f10f7bb39e1308440c1fec548f7 SHA1: 2f0e6f8da621f07e0708c1da0e0d388f87f0ddf0 SHA256: 0c47a08e9ff71e305c32fb06108b078e01edff0d55fdcf6b647a81f0b8cc1368 Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmomsc Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-mslookup-utils Source: osmo-hlr Version: 1.9.2.2.459a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 81 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmo-mslookup1 (= 1.9.2.2.459a.202605271800), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-mslookup-utils_1.9.2.2.459a.202605271800_armhf.deb Size: 18128 MD5sum: 8e6be9a2476f0c1e88cb6fdbe432b7c5 SHA1: e5679ff33727b68958efe8754838a04fc1804869 SHA256: af429b71ac9dd42e5a35e373b0f836a69078ea047c481a1f5e9902cc9f92ef6c Section: utils Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Utilities for Osmocom MS lookup This package contains a simple MS lookup client utility. Package: osmo-pcap-client Source: osmo-pcap Version: 0.8.0.2.d0b2.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 99 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libgnutls30t64 (>= 3.8.4), libosmocore22, libosmogsm20, libosmonetif11, libosmovty13, libpcap0.8t64 (>= 0.9.8), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-pcap-client_0.8.0.2.d0b2.202605271800_armhf.deb Size: 26608 MD5sum: 7d35566dc2715ba344ae40942687d4a5 SHA1: 78bd983100f97b725414614b1c15fb27a5292382 SHA256: 7935abdb7e86fb7c91248dab0699ac24d51ed135398aeef5e7dfc1034dbe9353 Section: net Priority: extra Homepage: https://osmocom.org/projects/osmo-pcap Description: Run osmo-pcap-client locally and send traces to a different system. Package: osmo-pcap-client-dbg Source: osmo-pcap Version: 0.8.0.2.d0b2.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 168 Depends: osmocom-nightly (= 202605271800), osmo-pcap-client (= 0.8.0.2.d0b2.202605271800) Filename: ./armhf/osmo-pcap-client-dbg_0.8.0.2.d0b2.202605271800_armhf.deb Size: 95400 MD5sum: 3088a579a53451dc2b9afd29c5e29b4b SHA1: add98cd1db4d090c7cb59b5b25928746158750e9 SHA256: a2e2839f43062fbaaae74469638f973d7960a73a6cbaff632232144e403f17de Section: net Priority: extra Homepage: https://osmocom.org/projects/osmo-pcap Description: Debug symbols of osmo-pcap-client-dbg Build-Ids: a1ed0d080b656056a2a699ca96e57ba520d43a57 Package: osmo-pcap-server Source: osmo-pcap Version: 0.8.0.2.d0b2.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 102 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libgnutls30t64 (>= 3.8.4), libosmocore22, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213), libzmq5 (>= 3.2.3+dfsg) Filename: ./armhf/osmo-pcap-server_0.8.0.2.d0b2.202605271800_armhf.deb Size: 31360 MD5sum: 69670fb1a21cd62950a8bf20cfafd233 SHA1: b0b8e487f3f5effa8e60c97555b5393f9dec82fa SHA256: 32f811745e93e8855fdf21457801fd9891728f9fb2c044ff066b07679d6fcec0 Section: net Priority: extra Homepage: https://osmocom.org/projects/osmo-pcap Description: Collect traces from other systems. Package: osmo-pcap-server-dbg Source: osmo-pcap Version: 0.8.0.2.d0b2.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 185 Depends: osmocom-nightly (= 202605271800), osmo-pcap-server (= 0.8.0.2.d0b2.202605271800) Filename: ./armhf/osmo-pcap-server-dbg_0.8.0.2.d0b2.202605271800_armhf.deb Size: 101192 MD5sum: 3b432f79b63976b8c66ba17d475183fd SHA1: 92df6b417ba158cf041da5a9ea0a5f381e6a6814 SHA256: 4d7309bb154cc84534137cdaf69d760f1eba9a8beb5529e89a29ccd0a2f969d0 Section: net Priority: extra Homepage: https://osmocom.org/projects/osmo-pcap Description: Debug symbols of osmo-pcap-server-dbg Build-Ids: 5e21d04bc7ed5ee13ada5626f65218330f40c143 Package: osmo-pcu Version: 1.5.2.3.ed7090.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 635 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.38), libgcc-s1 (>= 3.5), libosmoabis15, libosmocore22, libosmogb14, libosmogsm20, libosmoisdn0, libosmotrau11, libosmovty13, libstdc++6 (>= 4.1.1), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-pcu_1.5.2.3.ed7090.202605271800_armhf.deb Size: 211612 MD5sum: e412a20ab42c9ae263372e552d392b90 SHA1: 335612a6c939b82c150c73c1068607d80033f00d SHA256: 586adf6d5170b66bef96dedc47666973ea490b38359a34ef9b9754958311fa51 Section: net Priority: optional Homepage: http://osmocom.org/projects/osmopcu Description: Osmocom GPRS/EDGE Packet Control Unit (PCU) The GPRS Packet Control Unit is co-located with the GSM BTS or GSM BSC in order to provide packet-switched services for 2G (2.5G, 2.75G) networks. OsmoPCU is the Osmocom implementation of this network element. It interfaces to osmo-bts via the PCU socket of OsmoBTS and via Gb (NS-over-IP) interface with the SGSN such as OsmoSGSN. Package: osmo-pcu-dbg Source: osmo-pcu Version: 1.5.2.3.ed7090.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1566 Depends: osmocom-nightly (= 202605271800), osmo-pcu (= 1.5.2.3.ed7090.202605271800) Filename: ./armhf/osmo-pcu-dbg_1.5.2.3.ed7090.202605271800_armhf.deb Size: 1030668 MD5sum: 02c5a87f663f4b7d0e2851f03c9959b1 SHA1: c8fb6fd93751c4c0badb0e002bc9582c0326c9c0 SHA256: 5a2bf2295ead8bed8feb27ec37fa30413adc898f8fbd08d6574abdef5180b836 Section: debug Priority: extra Homepage: http://osmocom.org/projects/osmopcu Description: Debug symbols for the Osmocom GPRS/EDGE Packet Control Unit (PCU) The GPRS Packet Control Unit is co-located with the GSM BTS or GSM BSC in order to provide packet-switched services for 2G (2.5G, 2.75G) networks. OsmoPCU is the Osmocom implementation of this network element. It interfaces to osmo-bts via the PCU socket of OsmoBTS and via Gb (NS-over-IP) interface with the SGSN such as OsmoSGSN. Build-Ids: 70762a70e70b315a0c33a80a977281c419eefd1a Package: osmo-pcu-doc Source: osmo-pcu Version: 1.5.2.3.ed7090.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 1093 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-pcu-doc_1.5.2.3.ed7090.202605271800_all.deb Size: 1032076 MD5sum: 1461f31a61feaa69998e53aaa4c8268b SHA1: 9381b5051dcb631b88a8f26e34b4a002254492f1 SHA256: f11579bef164ebf8546445a1125c705d80699a07092dea8e6fa0a1794ccbf546 Section: doc Priority: optional Homepage: http://osmocom.org/projects/osmopcu Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-remsim-apitool Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 18 Depends: osmocom-nightly (= 202605271800), python3, python3-requests Filename: ./armhf/osmo-remsim-apitool_1.1.3.15.201a.202605271800_armhf.deb Size: 9000 MD5sum: 59741106e1c27bea65f29f0ffc1363f7 SHA1: 550b9f90974e655318b50371211e41be0ddd548d SHA256: eaad72edd412fb8fef22615a5671124bdbf956d6f9a7719eca7e3a42a3634734 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - API tool for server This is a small python tool for generating API requests to remsim-server, which can be used by the system administrator to introspect and/or modify the state (mostly slotmaps). Package: osmo-remsim-bankd Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 97 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.38), libcsv3 (>= 3.0.3), libosmo-rspro2, libosmocore22, libosmogsm20, libosmonetif11, libpcsclite1 (>= 1.5.0), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-remsim-bankd_1.1.3.15.201a.202605271800_armhf.deb Size: 30792 MD5sum: af69ee725bb567e0964ef24c93c603e8 SHA1: 4ca5723040bb60bfb180b4306fc7c434b9b58315 SHA256: f7ff14000360adf15efcf4b9d9d47f3ad34e7781c0bf3f7880187d27da6c889d Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Bank Daemon The remsim-bankd is managing a bank of SIM card readers and their respective cards. It establishes a control connection to remsim-server and receives inbound connections from remsim-clients. Package: osmo-remsim-bankd-dbgsym Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 158 Depends: osmo-remsim-bankd (= 1.1.3.15.201a.202605271800) Filename: ./armhf/osmo-remsim-bankd-dbgsym_1.1.3.15.201a.202605271800_armhf.deb Size: 85028 MD5sum: 5c9978db31f54f2a0cba336739328957 SHA1: 96138ece051cf878725720979718e906b042c470 SHA256: 870923c274f6d49a0bf9cc66015dac97d7469b58793739ae75a124e8b557adca Section: debug Priority: optional Multi-Arch: same Description: debug symbols for osmo-remsim-bankd Build-Ids: 43876cc30e2b49b833db5b919b684f54590ad960 Package: osmo-remsim-client-shell Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 80 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmo-rspro2, libosmocore22, libosmogsm20, libosmonetif11, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-remsim-client-shell_1.1.3.15.201a.202605271800_armhf.deb Size: 21388 MD5sum: c27fc24c4a2399ddf92714dd53269ae9 SHA1: c04de3ad739c689d0336fd3cc2b92292fb69c236 SHA256: 6abd0fef8a2c81b1436075ef763f5ddcbb190a294d9a93acfe0e7b56a6fa6369 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Interactive Client The remsim-client-shell is for manually interacting with a remote SIM card via remsim-bankd + remsim-server. It's mostly a test/debug tool. Package: osmo-remsim-client-shell-dbgsym Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 116 Depends: osmo-remsim-client-shell (= 1.1.3.15.201a.202605271800) Filename: ./armhf/osmo-remsim-client-shell-dbgsym_1.1.3.15.201a.202605271800_armhf.deb Size: 64632 MD5sum: 3e2e66186e1d9447f284cd30469ce6f3 SHA1: 1795a4010745eda95565836f7e4dc0c9bbcaf384 SHA256: fe1191b60f56c5cc7a8d2e8f129673b671b1efc88d619d609d7accb13de9fc5d Section: debug Priority: optional Multi-Arch: same Description: debug symbols for osmo-remsim-client-shell Build-Ids: 9fb6831d562cdf5b06db0047a5177a020500c802 Package: osmo-remsim-client-st2 Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 92 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmo-rspro2, libosmo-simtrace2-1, libosmocore22, libosmogsm20, libosmonetif11, libosmousb0, libtalloc2 (>= 2.0.4~git20101213), libusb-1.0-0 (>= 2:1.0.21) Breaks: osmo-remsim-client Replaces: osmo-remsim-client Filename: ./armhf/osmo-remsim-client-st2_1.1.3.15.201a.202605271800_armhf.deb Size: 24200 MD5sum: 25dce072dbc09e3ed8484121b65e7b1a SHA1: be21192fc06070d031206c033e9a0521f6b356f3 SHA256: 9b91f1e8c4dc1c511ec034b83e39e5f652c449cf115b033ba8e7b577bc26e32c Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Client for SIMtrace2 cardem firmware The remsim-client is managing a given phone/modem. It attaches to the 'cardem' firmware of a SIMtrcace2 (or compatible, such as sysmoQMOD) hardware and forwards the SIM card communication to a remsim-bankd, under the control of remsim-server. Package: osmo-remsim-client-st2-dbgsym Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 130 Depends: osmo-remsim-client-st2 (= 1.1.3.15.201a.202605271800) Filename: ./armhf/osmo-remsim-client-st2-dbgsym_1.1.3.15.201a.202605271800_armhf.deb Size: 73252 MD5sum: ebcdb4db9ce18ad042fa7ab838af5938 SHA1: 95e95ca380afa4d43dcec34480a3f066fb800bc9 SHA256: 92540ab22258714a38c58aa28df82c019b610cebea526e8ec3166b48e2417983 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for osmo-remsim-client-st2 Build-Ids: 0a6a53e91db3919289e57b5d37637ae6c7b87e20 Package: osmo-remsim-doc Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 280 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-remsim-doc_1.1.3.15.201a.202605271800_all.deb Size: 270776 MD5sum: ebc3637fa5e8d93ad72e86ef34fad21b SHA1: 261349c532bf352dacd9d0a1759f9836ccf0944d SHA256: 0628be5eabc723dfe22302ce668ddb36e1d7e6ea080698ebca047d549b217ae3 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM documentation User manual for Osmocom Remote SIM in PDF format. Package: osmo-remsim-server Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libjansson4 (>= 2.14), liborcania2.3 (>= 2.1.0), libosmo-rspro2, libosmocore22, libosmogsm20, libosmonetif11, libtalloc2 (>= 2.0.4~git20101213), libulfius2.7t64 (>= 2.7.0) Filename: ./armhf/osmo-remsim-server_1.1.3.15.201a.202605271800_armhf.deb Size: 26548 MD5sum: 8e7d355b8f220fd25be97613342c1ea5 SHA1: 7e9d86aa698ea78bcedfeae53d8da67fee391ec6 SHA256: f216082d36a82815fa6d4468a57d21b5f868ebde4d2a428201154ceb77bad87b Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Central Server The remsim-server is the central element of a osmo-remsim deployment, it maintains a list of clients + bankds connected to it, as well as the dynamic SIM card mappings between them. Package: osmo-remsim-server-dbgsym Source: osmo-remsim Version: 1.1.3.15.201a.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 146 Depends: osmo-remsim-server (= 1.1.3.15.201a.202605271800) Filename: ./armhf/osmo-remsim-server-dbgsym_1.1.3.15.201a.202605271800_armhf.deb Size: 81656 MD5sum: 2baffecbe4a1184550465e407b884da3 SHA1: e6eab199b160f7709f5b1ea690a005d8c4032fe0 SHA256: e93f87b145ee97817a2069c6e0c9a401047cb5a4b887ddc4df9e82d53602445f Section: debug Priority: optional Multi-Arch: same Description: debug symbols for osmo-remsim-server Build-Ids: 790023a9013b89429bee20f708b3153f5f5b237a Package: osmo-sgsn Version: 1.14.0 Architecture: armhf Maintainer: Osmocom team Installed-Size: 376 Depends: osmocom-nightly (= 202605271800), libasn1c1, libc6 (>= 2.34), libcares2 (>= 1.7.1), libgtp11 (>= 1.13.0), libosmo-gsup-client0, libosmo-ranap7, libosmo-sigtran12, libosmocore22, libosmoctrl0, libosmogb14, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-sgsn_1.14.0_armhf.deb Size: 126628 MD5sum: 4692c0d611c0aacc5fadd2f8f014651b SHA1: 76422f567bfe37f7a2b3113adc16c13262d4e86b SHA256: 9c1277cb7a28493b6693846645b6881326d8d9377981acca6ead8263ce016ecd Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: OsmoSGSN: Osmocom's Serving GPRS Support Node for 2G and 3G packet-switched mobile networks Package: osmo-sgsn-dbg Source: osmo-sgsn Version: 1.14.0 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1030 Depends: osmocom-nightly (= 202605271800), osmo-sgsn (= 1.14.0) Filename: ./armhf/osmo-sgsn-dbg_1.14.0_armhf.deb Size: 675884 MD5sum: 35b2fd6990450be1688e89151d4c4e74 SHA1: f34380a8efc79c494258eaaca04bd205ac689ae3 SHA256: 40a46dddf48c860ba6292b8560e49a5b44f819c3007c996a45c18a41f4cae659 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: OsmoSGSN: Osmocom's Serving GPRS Support Node for 2G and 3G packet-switched mobile networks Build-Ids: f859122eac24fd438e1c6d91d550f630e58e9384 Package: osmo-sgsn-doc Source: osmo-sgsn Version: 1.14.0 Architecture: all Maintainer: Osmocom team Installed-Size: 1560 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-sgsn-doc_1.14.0_all.deb Size: 1451148 MD5sum: 805725b4cfd696cde753a9ec08fc6472 SHA1: 72da79cf168bd025d0845c263cdfcf1195e40f19 SHA256: 307c314e5ef862535f8fdcfc1ecb7b361cfac86a1a2e257cd2630bc58321be0b Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-sip-connector Version: 1.7.2.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 93 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libglib2.0-0t64 (>= 2.12.0), libosmocore22, libosmogsm20, libosmovty13, libsofia-sip-ua-glib3t64 (>= 1.12.10), libsofia-sip-ua0t64 (>= 1.12.10), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-sip-connector_1.7.2.0.202605271800_armhf.deb Size: 27952 MD5sum: 57bcfbb79b1a34fe09ca38c5a52bf02f SHA1: 1f4522acdcbc5fbda4d1acec9824b385f2d4cd9d SHA256: 0afc086eb4cb1fa29cc6491903ad8fde347faed2a3b4432f083d762aacfd6a25 Section: net Priority: optional Homepage: https://osmocom.org/projects/osmo-sip-conector/wiki Description: MNCC to SIP bridge for osmo-nitb Use the osmo-nitb MNCC interface and bridge it to SIP. Package: osmo-sip-connector-dbg Source: osmo-sip-connector Version: 1.7.2.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 174 Depends: osmocom-nightly (= 202605271800), osmo-sip-connector (= 1.7.2.0.202605271800) Filename: ./armhf/osmo-sip-connector-dbg_1.7.2.0.202605271800_armhf.deb Size: 102504 MD5sum: f0b5f04d868f6ac0e25070afdc53587a SHA1: 3affad15f02f453e315093f39cea6adab71869f5 SHA256: 51500c8c8fa60636a73e7ceab42773ab758be200f145a25852c157c1137ac87f Section: debug Priority: extra Homepage: https://osmocom.org/projects/osmo-sip-conector/wiki Description: Debug symbols for the osmo-sip-connector Make debugging possible Build-Ids: 9a5b2d5144768ff8ce4fcc3cf4c8e5c00bc9850f Package: osmo-sip-connector-doc Source: osmo-sip-connector Version: 1.7.2.0.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 657 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-sip-connector-doc_1.7.2.0.202605271800_all.deb Size: 623324 MD5sum: 0c2688cf38559a4d8cf46078b5a05a54 SHA1: 28852a0b31c7cdfba1bc459abbeb6b4649b715e1 SHA256: fda4699fed3b5c4e69bd09e200faf575161baf49fd0481f79ad757e3796828aa Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmo-sip-conector/wiki Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-smlc Version: 0.4.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 92 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmo-sigtran12, libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213), libdbd-sqlite3 Filename: ./armhf/osmo-smlc_0.4.0.0.202605271800_armhf.deb Size: 26728 MD5sum: 4b74754a7fb867694b04c77f8aabe454 SHA1: f0586de28dd6af9cc9041b0d5b4cc19669cb99a7 SHA256: 688dc1cee14ab5ba846550729c5d7b02e838684fddbe2df2a760068942363477 Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/projects/osmo-smlc Description: OsmoSMLC: Osmocom's Location Services Center FIXME . This Osmocom implementation of the SMLC handles Lb interfaces via 3GPP Lb in an M3UA ASP role. Package: osmo-smlc-dbg Source: osmo-smlc Version: 0.4.0.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 178 Depends: osmocom-nightly (= 202605271800), osmo-smlc (= 0.4.0.0.202605271800) Filename: ./armhf/osmo-smlc-dbg_0.4.0.0.202605271800_armhf.deb Size: 104600 MD5sum: 70d3d60b9e6c437df9af1dbb51119ee5 SHA1: 02b41dd884e3fa48ac0eb653073c851ea58b146c SHA256: 021fd30f81bee0eec5f89d9de2ed95f5c8aad03935922c5d4da814f9e51e1276 Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/osmo-smlc Description: OsmoSMLC: Osmocom's Location Services Center FIXME . This Osmocom implementation of the SMLC handles Lb interfaces via 3GPP Lb in an M3UA ASP role. . This package contains the debug symbols for osmo-smlc in order to generate meaningful backtraces in bug-reports. Build-Ids: 7e043b68f35878db3dcec3c87b8e791978f9c687 Package: osmo-smlc-doc Source: osmo-smlc Version: 0.4.0.0.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 892 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-smlc-doc_0.4.0.0.202605271800_all.deb Size: 841276 MD5sum: 81e1ed78ec99d4f394e4f4367170ac39 SHA1: 810032af1721d40dfbe1c3458814f5a17c9d08f1 SHA256: 1eff6af655c29b34280864c6b680dea285be2fb99e924cfdd0a708e91a74483c Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmo-smlc Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-stp Source: libosmo-sigtran Version: 2.2.1.101.fd7b.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 108 Depends: osmocom-nightly (= 202605271800), libosmo-sigtran12, libc6 (>= 2.34), libosmocore22, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-stp_2.2.1.101.fd7b.202605271800_armhf.deb Size: 22452 MD5sum: 167362dabf1cbece13cc0bbd0cf2b04f SHA1: 69d2799850310a324f54575228ef439ae2c7db24 SHA256: 085105dc318a543da9ff2892ab5ab6ca6083bff08835c01b348c730ee48587f4 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Osmocom SIGTRAN STP (Signaling Transfer Point) This is the Osmocom (Open Source Mobile Communications) implementation of a Signaling Transfer Point (STP) for SS7/SIGTRAN telecommunication networks. At this point it is a very minimal implementation, missing lots of the functionality usually present in a STP, such as Global Title Routing, Global Title Translation. Package: osmo-stp-dbg Source: libosmo-sigtran Version: 2.2.1.101.fd7b.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 50 Depends: osmocom-nightly (= 202605271800), osmo-stp (= 2.2.1.101.fd7b.202605271800) Filename: ./armhf/osmo-stp-dbg_2.2.1.101.fd7b.202605271800_armhf.deb Size: 27260 MD5sum: 9aad2f87c3087da306c4a607279f46b1 SHA1: 1990c80e968d18f581ab34a2a0537baa2b29a852 SHA256: 9afafce686ad26a21d4d4665ecfa30439d5dc59345306c8818c90e1cbf5b9723 Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Debug symbols for Osmocom SIGTRAN STP (Signaling Transfer Point) This package contains debug symbols for the Osmocom SIGTRAN STP (OsmoSTP). . OsmoSTP is the Osmocom (Open Source Mobile Communications) implementation of a Signaling Transfer Point (STP) for SS7/SIGTRAN telecommunication networks. At this point it is a very minimal implementation, missing lots of the functionality usually present in a STP, such as Global Title Routing, Global Title Translation. Build-Ids: 4535a190ebea28b87f38be629c2fb129402af96e Package: osmo-stp-doc Source: libosmo-sigtran Version: 2.2.1.101.fd7b.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 849 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-stp-doc_2.2.1.101.fd7b.202605271800_all.deb Size: 803512 MD5sum: 123e3c8ff0def284e65d9549db5e80ea SHA1: 5aeacf9e3bd89199136686142581635050593d80 SHA256: 6967756d12750f1a5941baabb23ff4561ccf234a02b1219ae26f942bc09c80f2 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-sysmon Version: 0.3.2.6.692b.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~), liboping0 (>= 1.7.0), libosmocore22, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-sysmon_0.3.2.6.692b.202605271800_armhf.deb Size: 18696 MD5sum: 36ee506837a620248e967753f2b2396b SHA1: 5d1263c43077d1334fdf80d74a460fdc3a3c32f6 SHA256: 7873f39041098ddf699d0ba931c79271b496df18e2300f1ed7404b25fb3f1415 Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/ Description: Simple Osmocom System Monitor (osysmon) This application prints on screen once per second relevant information about the status of the system. Information being printed can be specified through configuration file (and VTY). . Useful to run as a login shell to provide users with some diagnose system without providing full access the system. Package: osmo-sysmon-dbg Source: osmo-sysmon Version: 0.3.2.6.692b.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 123 Depends: osmocom-nightly (= 202605271800), osmo-sysmon (= 0.3.2.6.692b.202605271800) Filename: ./armhf/osmo-sysmon-dbg_0.3.2.6.692b.202605271800_armhf.deb Size: 71080 MD5sum: b2e0be083b00b58a55e66297d658a603 SHA1: 811b65d81cc0d0760abdb701a8fefbe28640dac2 SHA256: fc07a6b0b8e96dd26a84bfb1ff846a29aaaa5689e293fc17298c5b119c45af29 Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/ Description: Simple Osmocom System Monitor (osysmon) This application prints on screen once per second relevant information about the status of the system. Information being printed can be specified through configuration file (and VTY). . Useful to run as a login shell to provide users with some diagnose system without providing full access the system. . This package contains the debug symbols for osmo-sysmon in order to generate meaningful backtraces in bug-reports. Build-Ids: a2c56a85dc38f39c3a06b7cebcf481ed366d57ea Package: osmo-trx Version: 1.7.2.13.7923.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 22 Depends: osmocom-nightly (= 202605271800), osmo-trx-uhd Filename: ./all/osmo-trx_1.7.2.13.7923.202605271800_all.deb Size: 12480 MD5sum: 757d2439c3d026f99ba60803d5eeab5e SHA1: 938471499717f3be04893ee2c062df98340956b2 SHA256: 59daa0f4b9d62e9259e4aa0b36a03626f4ca41c79e065d42027f14fe4e5d5085 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: Metapackage for osmo-trx-uhd Package: osmo-trx-dbg Source: osmo-trx Version: 1.7.2.13.7923.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 8447 Depends: osmocom-nightly (= 202605271800), osmo-trx-uhd (= 1.7.2.13.7923.202605271800), osmo-trx-usrp1 (= 1.7.2.13.7923.202605271800), osmo-trx-lms (= 1.7.2.13.7923.202605271800), osmo-trx-ipc (= 1.7.2.13.7923.202605271800) Filename: ./armhf/osmo-trx-dbg_1.7.2.13.7923.202605271800_armhf.deb Size: 6965232 MD5sum: b669fc004ed93dcee53677a61323bf60 SHA1: 5fea68281e64c24beecc7f33adfbd211c425a273 SHA256: 5cf8b22fd6ae4295e538a70892ea8531c98531b0345efb29ca49adbd1a8961c5 Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmotrx Description: Debug symbols for the osmo-trx-* Make debugging possible Build-Ids: 08fa6a4cd3bdf66b9c9cfb014386e0cd38cc19e7 14c190ba58d7dcef78afcb30c594dc85604dea5f 48acd3c23eef904163c9671a9bc74923a5031b33 596a7da09f0baa6419d1a30397333c3a91700ad7 ab5036a6c5f2f8468c0e92ba0a8e982293120838 Package: osmo-trx-doc Source: osmo-trx Version: 1.7.2.13.7923.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 790 Depends: osmocom-nightly (= 202605271800) Filename: ./all/osmo-trx-doc_1.7.2.13.7923.202605271800_all.deb Size: 755512 MD5sum: 9677012f46c93ab5b68815dd21850261 SHA1: a0d056534ce6b48ce0a1d2f425dfe01ea0e67e98 SHA256: 886843ac28f4bf54f47072953da76fb93ea8ace2c0300c51b15b7ef793ec7997 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-trx-ipc Source: osmo-trx Version: 1.7.2.13.7923.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 364 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.38), libfftw3-single3 (>= 3.3.10), libgcc-s1 (>= 4.0), libosmocore22, libosmoctrl0, libosmovty13, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-trx-ipc_1.7.2.13.7923.202605271800_armhf.deb Size: 114112 MD5sum: 3e6813821d0a7cdb1ce80a01962cf57f SHA1: a0b638232f22d1d688691cef9de2dccda6647611 SHA256: 8c2dfaf8881d92d673caa35ddd94440f1860b5836b2195344f96ada3785a3ec3 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: SDR transceiver that implements Layer 1 of a GSM BTS (generic IPC) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-trx-lms Source: osmo-trx Version: 1.7.2.13.7923.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 364 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.38), libfftw3-single3 (>= 3.3.10), libgcc-s1 (>= 4.0), liblimesuite23.11-1 (>= 23.11.0+dfsg), libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-trx-lms_1.7.2.13.7923.202605271800_armhf.deb Size: 115832 MD5sum: 669e90534b0fa83e59bdd5f53858fb4f SHA1: 9c88c7576ba9c748218821a8c68a3ad98b2d46c7 SHA256: d71935542fd6b8d3cf34655c01fd44c0582ee1afa7ccf25a33fef3ca68e37997 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: SDR transceiver that implements Layer 1 of a GSM BTS (LimeSuite) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-trx-ms-blade Source: osmo-trx Version: 1.7.2.13.7923.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 282 Depends: osmocom-nightly (= 202605271800), libbladerf2 (>= 0.2024.05), libc6 (>= 2.38), libgcc-s1 (>= 4.0), libosmocodec4, libosmocoding0, libosmocore22, libosmogsm20, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-trx-ms-blade_1.7.2.13.7923.202605271800_armhf.deb Size: 98352 MD5sum: 3f99962e5406dce0eda0166b6fc2b62c SHA1: 7f599936c26de4ddf7b10230fe298f33095e947f SHA256: e73872ea91a13df3314d62a31ebaca2d59cb283af4fd19aa7d847fd94b016a14 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: MS side transceiver (bladeRF) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-trx-uhd Source: osmo-trx Version: 1.7.2.13.7923.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 366 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.38), libfftw3-single3 (>= 3.3.10), libgcc-s1 (>= 4.0), libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213), libuhd4.8.0 (>= 4.8.0.0+ds1) Filename: ./armhf/osmo-trx-uhd_1.7.2.13.7923.202605271800_armhf.deb Size: 122820 MD5sum: 42bcac8a110bc25b92c8c6ea9a085ecd SHA1: 41b22c8ac1f82357262737c37a080bed29d0072d SHA256: 039edb0299c732b4e943e66da4b39f960c704f4c6ae0b620ddcde7d45970d0b3 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: SDR transceiver that implements Layer 1 of a GSM BTS (UHD) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-trx-usrp1 Source: osmo-trx Version: 1.7.2.13.7923.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 641 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.38), libfftw3-single3 (>= 3.3.10), libgcc-s1 (>= 4.0), libosmocore22, libosmoctrl0, libosmovty13, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213), libusrp1 Filename: ./armhf/osmo-trx-usrp1_1.7.2.13.7923.202605271800_armhf.deb Size: 247416 MD5sum: fac73a52d948475d0d8e8d85f28cd8b4 SHA1: 38799e626e4449d725d26a8b8be0ff7d73219756 SHA256: c790b370b3bca1138e20ac40ef08846c10f3ebdda7c64d4a4afe7b604aaca164 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: SDR transceiver that implements Layer 1 of a GSM BTS (USRP1) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-uecups Version: 0.3.0.9.526e.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 83 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libjansson4 (>= 2.14), libosmocore22, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-uecups_0.3.0.9.526e.202605271800_armhf.deb Size: 23424 MD5sum: e66c4435076e9af2799287e76e7f9425 SHA1: f2421aa30e595457d1fe33199b46ee886faf9078 SHA256: d82cdefcd6ad835b464877698e89487f2440dc93675120f268d5f2dc908cbf9a Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/projects/osmo-uecups Description: OsmoUECUPS: UE/MME/SGW side GTP user plane daemon with control plane separation Package: osmo-uecups-dbgsym Source: osmo-uecups Version: 0.3.0.9.526e.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 154 Depends: osmo-uecups (= 0.3.0.9.526e.202605271800) Filename: ./armhf/osmo-uecups-dbgsym_0.3.0.9.526e.202605271800_armhf.deb Size: 88928 MD5sum: 45110becdae3b2de41f820936afd9a38 SHA1: 7fdd1dc18184717f1cd08523de944b5dd5939383 SHA256: abe2eb9d0dc8680d27318d9c6fb1de41668186c729cdf6f3ca0a8740d0bdbc3e Section: debug Priority: optional Description: debug symbols for osmo-uecups Build-Ids: 8718676f73061d3e445162836bce4f9e84a22933 Package: osmocom-keyring Version: 1.1.1.8.7873.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 11 Filename: ./armhf/osmocom-keyring_1.1.1.8.7873.202605271800_armhf.deb Size: 3196 MD5sum: cedaa3c401f18062089d99e44b6fe0dd SHA1: 44e9cecdf64cb4552e78678f81856bc9fbad67c2 SHA256: 6201e7fe0a87b1413f56f68b0e7109d4179147cd8ebaa47aa3ff3f2ae01f06d4 Section: misc Priority: optional Homepage: https://osmocom.org/ Description: Pubkey for Osmocom repositories at obs.osmocom.org Package: osmocom-nightly Version: 202605271800 Architecture: armhf Maintainer: Osmocom OBS scripts Installed-Size: 7 Depends: osmocom-keyring Conflicts: osmocom-2022q1, osmocom-2022q2, osmocom-2023q1, osmocom-latest, osmocom-master, osmocom-nightly Filename: ./armhf/osmocom-nightly_202605271800_armhf.deb Size: 1192 MD5sum: 03428b0548e1b144c8bd6707670fc80b SHA1: a202e3da9b38acb0d235c6562162a87639a8b292 SHA256: 6ae6971c35a7864c298d8e5efe8f52c60ecdc3a8dc011d5beb80fdea6866cb59 Section: unknown Priority: optional Description: Dummy package, conflicts with ['osmocom-2022q1', 'osmocom-2022q2', 'osmocom-2023q1', 'osmocom-latest', 'osmocom-master', 'osmocom-nightly'] Package: python3-osmopy-libs Source: osmo-python-tests Version: 0.3.0.166.5d0f.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 83 Depends: osmocom-nightly (= 202605271800), python3:any Filename: ./all/python3-osmopy-libs_0.3.0.166.5d0f.202605271800_all.deb Size: 17832 MD5sum: 51d611ab7be5559821c65427f0a7d1f5 SHA1: c08dfa323cbf055b3c1e78fe23a287c4ed9f4955 SHA256: 9930ebaf831ad9f1a975402c91d1903f6411cb6f3567f567653c58ae876d17c2 Section: python Priority: optional Homepage: https://gitea.osmocom.org/cellular-infrastructure/osmo-python-tests Description: Python code (not only) for testing of Osmocom programs . This package contains the Python 3 version of osmopy libraries. Package: python3-osmopy-utils Source: osmo-python-tests Version: 0.3.0.166.5d0f.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 58 Depends: osmocom-nightly (= 202605271800), python3:any, python3-osmopy-libs, python3-aiohttp Filename: ./all/python3-osmopy-utils_0.3.0.166.5d0f.202605271800_all.deb Size: 13020 MD5sum: c8c8f63d662684cf1aa45b3d36e21dc3 SHA1: 991a1770b87605671406b162a0e38c9f0960f361 SHA256: 33684a6e86e44fe410add4fad7c765d26c7e6a5d147c8971bfeac7ec2524dac7 Section: python Priority: optional Homepage: https://gitea.osmocom.org/cellular-infrastructure/osmo-python-tests Description: Python code (not only) for testing of Osmocom programs . This package contains the Python 3 version of osmopy utils. Package: rtl-sdr Version: 2.0.2.5.8419.202605271800 Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 568 Depends: osmocom-nightly (= 202605271800), librtlsdr0 (= 2.0.2.5.8419.202605271800), libc6 (>= 2.34) Filename: ./armhf/rtl-sdr_2.0.2.5.8419.202605271800_armhf.deb Size: 53472 MD5sum: caa337d50e72a68471ff5abb9d1b6bea SHA1: 719c5d014263b83ba189b8b833fe098a7f0bb799 SHA256: 7d13f1bccb682b58b3fa35668052b24b212ccc23c02020b2738f2656d35b6a73 Section: comm Priority: optional Homepage: http://sdr.osmocom.org/trac/wiki/rtl-sdr Description: Software defined radio receiver for Realtek RTL2832U (tools) rtl-sdr is a software defined radio (SDR) receiver software for certain low-cost DVB-T/DAB(+) USB dongles based on the Realtek RTL2832U chip. . This package contains a set of command line utilities: * rtl_adsb: a simple ADS-B decoder for RTL2832 based DVB-T receivers * rtl_eeprom: an EEPROM programming tool for RTL2832 based DVB-T receivers * rtl_fm: a narrow band FM demodulator for RTL2832 based DVB-T receivers * rtl_sdr: an I/Q recorder for RTL2832 based DVB-T receivers * rtl_tcp: an I/Q spectrum server for RTL2832 based DVB-T receivers * rtl_test: a benchmark tool for RTL2832 based DVB-T receivers Package: rtl-sdr-dbgsym Source: rtl-sdr Version: 2.0.2.5.8419.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 322 Depends: rtl-sdr (= 2.0.2.5.8419.202605271800) Filename: ./armhf/rtl-sdr-dbgsym_2.0.2.5.8419.202605271800_armhf.deb Size: 149708 MD5sum: 9ab8d4ef6dc2051299c705667e77fc0a SHA1: 895a04bcca7e06aeede0ebb456074ca99fb6e049 SHA256: 31b9655c394c505ca47d58ff17184785250f2d076449b54984e85ba59df0e845 Section: debug Priority: optional Description: debug symbols for rtl-sdr Build-Ids: 345a5eab680f4d54fce735e2920822996da10faf 69ba5f326b50e079125638b8bbef7c2200e1d981 78e332915f14e51bf5d4c63e01d5adef216ccc81 810c02a1b3702fb21297b14a70a198ddbbd090b7 b02f42a3aaefa30c710f97e4b83fbcd763bbbf48 dd270d1b0c5cc95730e24caffcb9b7cd3f750fa6 e93099dccada378f49fad91f494b03e99a5da554 fe64876a812798a5b41e4e128359310ee2b0b128 Package: sdcc Version: 4.2.0~osmocom3.113.9edd Architecture: armhf Maintainer: Osmocom team Installed-Size: 7735 Depends: sdcc-libraries (= 4.2.0~osmocom3.113.9edd), libc6 (>= 2.38), libgcc-s1 (>= 3.5), libstdc++6 (>= 13.1), zlib1g (>= 1:1.2.0) Suggests: python, sdcc-ucsim Breaks: sdcc-ucsim (<< 3.5.0) Replaces: sdcc-ucsim (<< 3.5.0) Filename: ./armhf/sdcc_4.2.0~osmocom3.113.9edd_armhf.deb Size: 1803868 MD5sum: ef603042dd4e635427c57d2f989cdfd0 SHA1: c323075655f55ca797135e397ca0968ed6065c61 SHA256: 6c045c57060653bea1a578a1708a5523a75042f198f21cfd7cc3c908ed33d604 Section: electronics Priority: optional Homepage: http://sdcc.sourceforge.net Description: Small Device C Compiler SDCC is a C compiler for the Intel MCS51 family, HC08, PIC, GameBoy Z80, DS80S390, Z80, Z180 and STM8 microcontrollers. . This package includes the compiler, assemblers and linkers. Package: sdcc-dbgsym Source: sdcc Version: 4.2.0~osmocom3.113.9edd Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 5374 Depends: sdcc (= 4.2.0~osmocom3.113.9edd) Filename: ./armhf/sdcc-dbgsym_4.2.0~osmocom3.113.9edd_armhf.deb Size: 3749100 MD5sum: 38614905014dc39dd27a1f2be74d21ee SHA1: d286ea98e796544f5adf13f6b8a8e0569bf3c15c SHA256: 8d4e1085546b4a0f8a6564b7f927fa4e6fd12628496a6de7c4414f87bfcd1dab Section: debug Priority: optional Description: debug symbols for sdcc Build-Ids: 66ba4262fbc4e93320d199a9c0aa8b39710e2794 9206e0bbb30a8e69d25d2d1cc3f23dcace4aaab0 c18d1f3d54fa56fda7c0b17981378a99ee329278 ebb4e705b294b6149689b75231adf9b8dc1ae37b Package: sdcc-libraries Source: sdcc Version: 4.2.0~osmocom3.113.9edd Architecture: all Maintainer: Osmocom team Installed-Size: 18779 Recommends: gputils Filename: ./all/sdcc-libraries_4.2.0~osmocom3.113.9edd_all.deb Size: 1583856 MD5sum: e40b506055dd82d65fd6fba4a5986821 SHA1: d854dc1a61a674d0455eddd7993acf7dcd813e6a SHA256: 4ff7da66a4eb564a91d0bc77d86c5f550843aa49ed790999989430cd8e2addae Section: electronics Priority: optional Multi-Arch: foreign Homepage: http://sdcc.sourceforge.net Description: Small Device C Compiler (libraries) SDCC is a C compiler for the Intel MCS51 family, HC08, PIC, GameBoy Z80, DS80S390, Z80, Z180 and STM8 microcontrollers. . This package contains the core library for SDCC. Package: sdcc-ucsim Source: sdcc Version: 4.2.0~osmocom3.113.9edd Architecture: armhf Maintainer: Osmocom team Installed-Size: 2942 Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.5), libstdc++6 (>= 5) Suggests: sdcc Replaces: sdcc-ucsim-snapshot Filename: ./armhf/sdcc-ucsim_4.2.0~osmocom3.113.9edd_armhf.deb Size: 764896 MD5sum: a2e466e000fae6efebb37f9072210df9 SHA1: b292e042b62ba59a76894954b7352bba1a437120 SHA256: 30fe56ad29d04a5dee98cc825f48bcc5ac93c9a8bfbe2e4a501c560746cbc7a4 Section: electronics Priority: optional Homepage: http://sdcc.sourceforge.net Description: Micro-controller simulator for SDCC uCsim is a microcontroller simulator. It is extensible to support different microcontroller families. It currently supports Intel MCS51 family, HC08 and Z80 microcontrollers. Package: simtrace2-firmware Source: simtrace2 Version: 0.9.0.2.e196.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 552 Recommends: dfu-util Filename: ./all/simtrace2-firmware_0.9.0.2.e196.202605271800_all.deb Size: 46872 MD5sum: 6106cc43d8d8c07f00d4e31f484b6450 SHA1: 41121240d72d43e8902c086faf5ce818349d7fc1 SHA256: 4c3a5fcd159eed36a813bd77ce0e11c54bb7aabd6accf20db15519166b02c746 Section: devel Priority: optional Homepage: http://osmocom.org/projects/simtrace2/wiki Description: Firmware for SAM3 based SIMtrace2 USB Devices. Open Source firmware for the Cortex-M3 microcontroller in the "Osmocom SIMtrace2" USB-attached peripheral device. Will only work in SAM3S-based SIMtrace2, not in its SAM7S-based predecessor SIMtrace! Package: simtrace2-utils Source: simtrace2 Version: 0.9.0.2.e196.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 277 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libosmo-simtrace2-1, libosmocore22, libosmosim2, libosmousb0, libusb-1.0-0 (>= 2:1.0.21) Recommends: simtrace2-firmware Filename: ./armhf/simtrace2-utils_0.9.0.2.e196.202605271800_armhf.deb Size: 19836 MD5sum: 705e325a497040ff04b87737de568292 SHA1: 221f518f0da716926c9dd94a8ecac2bd3c37ee4a SHA256: 60131b9d6cc88ea4e8a076586e9e91998401b0ed28979fc74490337816c06421 Section: devel Priority: optional Multi-Arch: same Homepage: http://osmocom.org/projects/simtrace2/wiki Description: Host utilities to communicate with SIMtrace2 USB Devices. Package: simtrace2-utils-dbgsym Source: simtrace2 Version: 0.9.0.2.e196.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 113 Depends: simtrace2-utils (= 0.9.0.2.e196.202605271800) Filename: ./armhf/simtrace2-utils-dbgsym_0.9.0.2.e196.202605271800_armhf.deb Size: 51396 MD5sum: 66b289186f337b2df8034edcdf31f5d0 SHA1: df94188a3d064a6dc468ad98c5aca2e9d23174a0 SHA256: b2bf191f7486a656b41d408b2c83c5fcded0f9c172a2c85d9cb922be97a6719c Section: debug Priority: optional Multi-Arch: same Description: debug symbols for simtrace2-utils Build-Ids: 08da3489f00273a7ef6915a8f11daf87bb46bb0f 0e9e92c3c8441af4c760e8e9a28e81b3bd83f684 4f1310d70666bae9b6159ece6409878b46cba41a 5df9cb39e2ac9e527a20e22248726ff63c1d052a Package: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: all Maintainer: Osmocom team Installed-Size: 142 Depends: osmocom-nightly (= 202605271800), strongswan-charon, strongswan-starter Filename: ./all/strongswan_0.1.2.osmo.epdg.0.202605271800_all.deb Size: 70144 MD5sum: c7af95ede09948bbf907bc8d78c92bc2 SHA1: 0aa668660a6449c0bcc5bb7d68089185c70c6481 SHA256: 03c61e740c54444c2e48c9bf123229645e4609e86716e9f310d7d8e629679cc0 Section: net Priority: optional Homepage: http://www.strongswan.org Description: IPsec VPN solution metapackage The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This metapackage installs the packages required to maintain IKEv1 and IKEv2 connections via ipsec.conf or ipsec.secrets. Package: strongswan-charon Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 257 Pre-Depends: debconf | debconf-2.0 Depends: osmocom-nightly (= 202605271800), iproute2 | iproute, libstrongswan (= 2:0.1.2.osmo.epdg.0.202605271800), strongswan-starter, libc6 (>= 2.34), strongswan-libcharon (>= 2:0.1.2.osmo.epdg.0.202605271800) Provides: ike-server Filename: ./armhf/strongswan-charon_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 81444 MD5sum: 8cb059a6aea2a30b6b0ed6778b165de5 SHA1: 7e2cdfe7a1cf50614aba3b5aa82612e39ba0898d SHA256: 33361b680b9db98d5b97d5971fa5dbd137bc8892ed5fb4318069a552e3489650 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan Internet Key Exchange daemon The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . charon is an IPsec IKEv2 daemon which can act as an initiator or a responder. It is written from scratch using a fully multi-threaded design and a modular architecture. Various plugins can provide additional functionality. Package: strongswan-charon-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 73 Depends: strongswan-charon (= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/strongswan-charon-dbgsym_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 51708 MD5sum: 9055c671b3afe2de8ac4e9cbf2fc58f6 SHA1: fc5cd9d2483099d79abcdf553cee8b4ed41f9e94 SHA256: 1832d31650f30047ab4fbf58c08cc114e7874c5cffc44aa836aa8ab7aa1c9732 Section: debug Priority: optional Description: debug symbols for strongswan-charon Build-Ids: bcf468eed2ff23182bfcb73590eeb2b0138a27c0 Package: strongswan-libcharon Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1106 Depends: osmocom-nightly (= 202605271800), libstrongswan (= 2:0.1.2.osmo.epdg.0.202605271800), libc6 (>= 2.34) Recommends: libcharon-extauth-plugins Suggests: libcharon-extra-plugins Breaks: strongswan-starter (<= 5.6.1-2) Replaces: strongswan-starter (<= 5.6.1-2) Filename: ./armhf/strongswan-libcharon_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 268416 MD5sum: 0dbfb5d5f05e978a2912ecd710334b54 SHA1: 9394e8e25e9b29778451f3645c05dff966a24887 SHA256: 24957fe9416d5c7301228d859e5c2736999dd093426a6f49a5d557fb478cdcc9 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan charon library The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the charon library, used by IKE client like strongswan-charon, strongswan-charon-cmd or strongswan-nm as well as standard plugins: - socket-default - counters - bypass-lan (disabled by default) . On Linux, it also contains the xfrmi binary which can be used on Linux 4.19+ to create XFRM interfaces (for more information, see https://wiki.strongswan.org/projects/strongswan/wiki/RouteBasedVPN) Package: strongswan-libcharon-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 1138 Depends: strongswan-libcharon (= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/strongswan-libcharon-dbgsym_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 1039164 MD5sum: c12ea058f54502837199b25305c0c224 SHA1: 91b39d94bce90dcf5131e80eabe420849e3a8e04 SHA256: 441b89964b43cc4bace950dfc4ecb88655966499a464747ce81cd7b0d99f6841 Section: debug Priority: optional Description: debug symbols for strongswan-libcharon Build-Ids: 18ed9fc3cf69968349e6557ba2fc3dfb5f524648 41ecbaa21d9355c9fc22876b9fcef08a5dcd44c9 489adb68921e0e938c73a6a1b28e8f19688ff051 a6c88212208e49cd538c865aee9102ee6c6d7f07 c9822846f909f969667828e62394269d8c32158d e11b2e23bb50fb534a9684eefb1385e2b752afd8 Package: strongswan-nm Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 215 Depends: osmocom-nightly (= 202605271800), libc6 (>= 2.34), libglib2.0-0t64 (>= 2.80.0), libnm0 (>= 1.2.0), libstrongswan (>= 2:0.1.2.osmo.epdg.0.202605271800), strongswan-libcharon (>= 2:0.1.2.osmo.epdg.0.202605271800) Recommends: network-manager-strongswan Replaces: network-manager-strongswan (<= 1.4.1-1~) Filename: ./armhf/strongswan-nm_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 82060 MD5sum: 58ab0cfbb6b5badb59baa910e478a4d1 SHA1: cad3e1c46783ad13389da34c30da2a7c8ef20ff5 SHA256: b9b76607a8596354464e89bc57d59f1bd7c30705385573dc0da54eb872b52589 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan plugin to interact with NetworkManager The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This plugin provides an interface which allows NetworkManager to configure and control the IKEv2 daemon directly through D-Bus. It is designed to work in conjunction with the network-manager-strongswan package, providing a simple graphical frontend to configure IPsec based VPNs. Package: strongswan-nm-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 161 Depends: strongswan-nm (= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/strongswan-nm-dbgsym_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 119724 MD5sum: 1fcf5b54635d061b44a66583fb524a2f SHA1: bd6296869bae030e86c064705a05c06ef10df72e SHA256: 8a552f6e9bc0c2532f31b2e62504dbd286423556e6c21882877acf18e222cbbe Section: debug Priority: optional Description: debug symbols for strongswan-nm Build-Ids: f9dd85fd0aae243ef66ca4f589c236fb4160c0a4 Package: strongswan-pki Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 244 Depends: osmocom-nightly (= 202605271800), libstrongswan (= 2:0.1.2.osmo.epdg.0.202605271800), libc6 (>= 2.34) Filename: ./armhf/strongswan-pki_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 111464 MD5sum: b3db9bae0435ff923aa13b9fcf2a1811 SHA1: 814fc8f1f24c70cb2dbe946262240eb3f8e982c5 SHA256: 19f08982b952185e93e59b0fc2d9fabca931575e404f2de52f96d7d237f7b64b Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan IPsec client, pki command The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the pki tool which allows on to run a simple public key infrastructure. Package: strongswan-pki-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 165 Depends: strongswan-pki (= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/strongswan-pki-dbgsym_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 87524 MD5sum: 0f02d9b6046ec52fd1fbc304c7f8bd72 SHA1: c61e3796d2d721bf253491d288c3d291b96d3127 SHA256: 48f8f7ee85c4e7499f0a0c4fc7b3f25d0b588d307cbb9d78bd61137a9a37c8f9 Section: debug Priority: optional Description: debug symbols for strongswan-pki Build-Ids: f0e42d8c5ee6734406740208608541327c2aa4ae Package: strongswan-starter Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 632 Pre-Depends: init-system-helpers (>= 1.54~) Depends: osmocom-nightly (= 202605271800), adduser, libstrongswan (= 2:0.1.2.osmo.epdg.0.202605271800), sysvinit-utils (>= 3.05-3), debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.38) Recommends: strongswan-charon Conflicts: openswan Filename: ./armhf/strongswan-starter_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 196964 MD5sum: 6a82b21fad67ca1d7001e7ac00f3958d SHA1: 4ea0387062d0a251ece95a587bb949ccff72b14a SHA256: 2f68939bd72c6e3e3f2704914e672a46dba365a3f54341544319184e0fc9208d Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan daemon starter and configuration file parser The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . The starter and the associated "ipsec" script control the charon daemon from the command line. It parses ipsec.conf and loads the configurations to the daemon. Package: strongswan-starter-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 399 Depends: strongswan-starter (= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/strongswan-starter-dbgsym_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 293972 MD5sum: 431e7c8e84a0d6edb5e3e41aea39d896 SHA1: d7623f1ed4cf502772acfb6da248656a74363669 SHA256: a533ab86686b12355d27e551e5be96136e1b9f2a0dd0a7cc29d2630dbdb326ef Section: debug Priority: optional Description: debug symbols for strongswan-starter Build-Ids: 398dec56635d80d9906f1bc52468cd67ab983ede c0decea5092b2d97cd255f845f8a5447ffc5dd37 e92d13dc74b70ed0e30f4cd04c2374c63dc736b7 Package: strongswan-swanctl Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 546 Depends: osmocom-nightly (= 202605271800), libstrongswan (= 2:0.1.2.osmo.epdg.0.202605271800), libc6 (>= 2.38) Breaks: strongswan-starter (<< 5.8.0-1) Replaces: strongswan-starter (<< 5.8.0-1) Filename: ./armhf/strongswan-swanctl_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 159676 MD5sum: b9922ceb42a9019813301058f604b44e SHA1: c2e631163be495d36d6834bcebf5833d172511fc SHA256: 516589f0df2189b1d4df36c75b59c676af41d523dba9793b60f1eee54eb95d71 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan IPsec client, swanctl command The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the swanctl interface, used to configure a running charon daemon Package: strongswan-swanctl-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.0.202605271800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 457 Depends: strongswan-swanctl (= 2:0.1.2.osmo.epdg.0.202605271800) Filename: ./armhf/strongswan-swanctl-dbgsym_0.1.2.osmo.epdg.0.202605271800_armhf.deb Size: 342168 MD5sum: 07f7574d46112bec5c44164156d6c7c6 SHA1: b5e9b7bd54c5b2945d240ae67857dda8a8c16851 SHA256: 623cb1b983d060576f22a81c22fceaf708496e581a41aa911b3a3b6f0805bdf4 Section: debug Priority: optional Description: debug symbols for strongswan-swanctl Build-Ids: 11bddbb7791187592f5fc324498df3e573c05f2c 6c86cbfa05e3254d1cb83f19c3770b0bac57d61c 9acd2275a2101ae20511491d521c79dca624d9ca