Package: abisip-find Source: osmo-bsc Version: 1.14.0.10.44efd.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 148 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/abisip-find_1.14.0.10.44efd.202602051800_armhf.deb Size: 58504 MD5sum: 0c4962ad62353430bca688ca77d96073 SHA1: 9350cc62e376c4b199d0bf2afb8ccf89a853b2e8 SHA256: 4e57559c9c1932ac72fc936fd6d28d26059cbae587db76967d630ab060a4a752 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: Command line utility to find ip.access compatible BTS Package: charon-cmd Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 216 Depends: osmocom-nightly (= 202602051800), libstrongswan (= 2:0.1.2.osmo.epdg.202602051800), libc6 (>= 2.34), strongswan-libcharon (>= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/charon-cmd_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 79764 MD5sum: f6bb6e1e8cf65b6d07eaa1d409e19685 SHA1: 68cb7adc85377ee086b19afc154ebf5239247dcb SHA256: c704a395bcd42c669c6e285343c97ca1f0c47ae2c9fd76741845eb9eb3e72f56 Section: net Priority: optional Homepage: http://www.strongswan.org Description: standalone IPsec client The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the charon-cmd command, which can be used as a client to connect to a remote IKE daemon. Package: charon-cmd-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 110 Depends: charon-cmd (= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/charon-cmd-dbgsym_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 82232 MD5sum: c51ac87fa53557fb85a8f04e9a74f645 SHA1: ba6788aa2aeb974cbd185ec140a11cff55101865 SHA256: 24dd831312dda4b258a399f96cdffc728e2fded890b5b11e12b4dce3da34a6a0 Section: debug Priority: optional Description: debug symbols for charon-cmd Build-Ids: 9983aa130131d9bb7bc3540dbc8953fc4da8aec5 Package: charon-systemd Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 233 Depends: osmocom-nightly (= 202602051800), libstrongswan (= 2:0.1.2.osmo.epdg.202602051800), strongswan-swanctl, libc6 (>= 2.34), libsystemd0, strongswan-libcharon (>= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/charon-systemd_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 77096 MD5sum: f8100facdca17bd3f008c12e73b2ed33 SHA1: 89c76cdd5ec85bd2aa7548cdb1f6f1b6aa13eda0 SHA256: 7bd572eaaaec0fac5fa14e35a1a0ee30974056a3ef96a139fe5e8b1cb7a1b51f Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan IPsec client, systemd support The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the charon-systemd files. Package: charon-systemd-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 71 Depends: charon-systemd (= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/charon-systemd-dbgsym_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 51352 MD5sum: 2024fd360c7bbcd2c420845c3fee53b7 SHA1: 868dbedeee79b96e9080f3b6d9d01352eb9af129 SHA256: 0f66c382064ae7b19222ad25312cc2f311cd8909b7c1203e021f2591ba0396e6 Section: debug Priority: optional Description: debug symbols for charon-systemd Build-Ids: 80c9e692803d4d4a5b7770d1c3243a9deee6b44c Package: gtp-echo-responder Source: osmo-ggsn Version: 1.14.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 108 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34) Filename: ./armhf/gtp-echo-responder_1.14.0.202602051800_armhf.deb Size: 23416 MD5sum: 589b33048db4712161d0df0e0ce91e87 SHA1: e9b387f2b4eea16269866406085044ccb17e470b SHA256: fd99b5b9193996900400d468222056d314859c403ffe7c7b7c03eea4e4a4e324 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/openggsn Description: Small program answering GTP ECHO Request with GTP ECHO Response Package: gtp-echo-responder-dbg Source: osmo-ggsn Version: 1.14.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 16 Depends: osmocom-nightly (= 202602051800), gtp-echo-responder (= 1.14.0.202602051800) Filename: ./armhf/gtp-echo-responder-dbg_1.14.0.202602051800_armhf.deb Size: 8712 MD5sum: 2677711c8cc0a50e06d874948849b98d SHA1: d4d797482edc522ce063a09a61af25198a5a8d2e SHA256: 23c0030e5040bbc7f1895fa933659d4c7e236ac4a82036819980def06a80d00b Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: Debug symbols for gtp-echo-responder Small program answering GTP ECHO Request with GTP ECHO Response. Package: libasn1c-dbg Source: libasn1c Version: 0.9.38.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 300 Depends: osmocom-nightly (= 202602051800), libasn1c1 (= 0.9.38.202602051800) Conflicts: osmo-libasn1c-dbg Replaces: osmo-libasn1c-dbg Filename: ./armhf/libasn1c-dbg_0.9.38.202602051800_armhf.deb Size: 269252 MD5sum: 01309a3723c1e1be7467d440abcd6c22 SHA1: 937033cba2a53612eca78c5657b3564a6c351da6 SHA256: cf775845711814adc9a51b787fe36eecdb652caf33c70309ca122293816403d0 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libasn1c Description: asn1c runtime code as shared library Build-Ids: f98f3252d11cdf2ca1735679c13f2ef281dba819 Package: libasn1c-dev Source: libasn1c Version: 0.9.38.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 406 Depends: osmocom-nightly (= 202602051800), libasn1c1 (= 0.9.38.202602051800) Conflicts: osmo-libasn1c-dev Replaces: osmo-libasn1c-dev Filename: ./armhf/libasn1c-dev_0.9.38.202602051800_armhf.deb Size: 95904 MD5sum: fa6d825e6c444384b9fe88f7e7c77249 SHA1: 9bd3b63a95f06e5a36793897a5b1455d515a8e04 SHA256: 81ba5051bb2e75aa1de038d699143f7ed25ee9be1d15bdc3b743ff32360efb48 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libasn1c Description: asn1c runtime code as shared library Package: libasn1c1 Source: libasn1c Version: 0.9.38.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 213 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libtalloc2 (>= 2.0.4~git20101213) Conflicts: osmo-libasn1c1 Replaces: osmo-libasn1c1 Filename: ./armhf/libasn1c1_0.9.38.202602051800_armhf.deb Size: 63512 MD5sum: 291c5056be81ac2e8a872c9fd040f892 SHA1: 7aed62eebbc57d2bdd4e16636000d904d8522569 SHA256: ae1c587e9183eb58778df4f3599ee23acf341aa45643ea8b322c8d2881806741 Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libasn1c Description: asn1c runtime code as shared library Package: libcharon-extauth-plugins Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 288 Depends: osmocom-nightly (= 202602051800), libstrongswan (= 2:0.1.2.osmo.epdg.202602051800), libc6 (>= 2.25) Breaks: libcharon-extra-plugins (<< 5.8.0-2~) Replaces: libcharon-extra-plugins (<< 5.8.0-2~) Filename: ./armhf/libcharon-extauth-plugins_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 81396 MD5sum: e8ba026aa95a181a8474e17829af9662 SHA1: 2fb44fda9c7f151cb64ec65f554ed76c12ee0597 SHA256: bce37e8b84dffae0abd6c437e7bedabeb06c06398aa77950942cc08c8fedef14 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan charon library (extended authentication plugins) The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides extended authentication plugins for the charon library: - eap-mschapv2 (EAP-MSCHAPv2 protocol handler using passwords/NT hashes) Used for client side to connect to some VPN concentrators configured for Windows 7+ and modern OSX/iOS using IKEv2 (identify with public key, authenticate with MSCHAPv2). - xauth-generic (Generic XAuth backend that provides passwords from ipsec.secrets and other credential sets) Used for the client side to connect to VPN concentrators configured for Android and older OSX/iOS using IKEv1 and XAUTH (identify with public key, authenticate with XAUTH password). . These are the "not always, but still more commonly used" plugins, for further needs even more plugins can be found in the package libcharon-extra-plugins. Package: libcharon-extauth-plugins-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 123 Depends: libcharon-extauth-plugins (= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/libcharon-extauth-plugins-dbgsym_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 103008 MD5sum: bc4d2f486717b48152d1b2f9256f3169 SHA1: 88f8dda281957dc9b683f09ebf12490ad9e21c5c SHA256: 452c731ad160cb9e91323af7dfdae8a598ec68f5e5ecba8b1772125081ac51da Section: debug Priority: optional Description: debug symbols for libcharon-extauth-plugins Build-Ids: 41fd98995b773fc1866903f64dc3f288f2cfaf2f ce19d6e55c4d67a72d5a7b0e948d13188e593109 Package: libcharon-extra-plugins Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2620 Depends: osmocom-nightly (= 202602051800), libstrongswan (= 2:0.1.2.osmo.epdg.202602051800), libc6 (>= 2.34), libgmp10 (>= 2:6.3.0+dfsg), libip4tc2 (>= 1.8.3), libosmogsm20, libpam0g (>= 0.99.7.1) Filename: ./armhf/libcharon-extra-plugins_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 258796 MD5sum: bf8e96fb36b2cc0348c63416b95c0b73 SHA1: eacd94604142f8d6219dd421c1ec6aa58f46ac44 SHA256: a1d5ddba6e3fa86c8bafda9ca98aed7d0ab071438561c69a0300f15e73ccbb32 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan charon library (extra plugins) The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides extra plugins for the charon library: - addrblock (Narrow traffic selectors to RFC 3779 address blocks in X.509 certificates) - certexpire (Export expiration dates of used certificates) - eap-aka (Generic EAP-AKA protocol handler using different backends) - eap-gtc (EAP-GTC protocol handler authenticating with XAuth backends) - eap-identity (EAP-Identity identity exchange algorithm, to use with other EAP protocols) - eap-md5 (EAP-MD5 protocol handler using passwords) - eap-radius (EAP server proxy plugin forwarding EAP conversations to a RADIUS server) - eap-tls (EAP-TLS protocol handler, to authenticate with certificates in EAP) - eap-tnc (EAP-TNC protocol handler, Trusted Network Connect in a TLS tunnel) - eap-ttls (EAP-TTLS protocol handler, wraps other EAP methods securely) - error-notify (Notification about errors via UNIX socket) - ha (High-Availability clustering) - kernel-libipsec (Userspace IPsec Backend with TUN devices) - led (Let Linux LED subsystem LEDs blink on IKE activity) - lookip (Virtual IP lookup facility using a UNIX socket) - tnc (Trusted Network Connect) - unity (Cisco Unity extensions for IKEv1) - xauth-eap (XAuth backend that uses EAP methods to verify passwords) - xauth-pam (XAuth backend that uses PAM modules to verify passwords) Package: libcharon-extra-plugins-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 1947 Depends: libcharon-extra-plugins (= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/libcharon-extra-plugins-dbgsym_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 1709784 MD5sum: 62d53d9df0058df9cb5d0b5877e96a0d SHA1: ffe7c03bc652ea2912dc317ba58b2df55f58875f SHA256: 5ac9ec789c13d75aa327700935abe9390e04359a5df114e9ad7894695172f871 Section: debug Priority: optional Description: debug symbols for libcharon-extra-plugins Build-Ids: 1190e34e0bc00e9c0883170b1dad531665f575b6 1db06feb3bd91b49af4d848d37a254fb42842afa 2714772c2d8c91a5dd88a15793b712ceafc3d9d5 2bfa0a92e168cef2b20e7799c730181a84f761dd 31bdc59a54d780918d8568bd94e7bee7fb6b5fdc 3f76084bcdb348af9cbb9382855f252728cd5b94 4880b3dfbb0549afe66c5e382bb3a0baa7b534bd 5b7b1675cd910449773d27d36f93ced56426bde3 627a198c02db815b01218cce87d03f2177c94325 64cba04b17dd94c382d309f16a38488a37cdaff0 6b2ad8347ab6cd9d773568d1200bbcfdf772ffdc 6b48ca271f94aac0ed75fcfca56aca15c4ee76b6 6e13b8cd1858691e81dd47b97c557be35a0f34b3 71a9eb1f835accdd7f93d17681c0cc66e740e9c7 753b758ff1d9291a4d25399792be461b7755c3fd 7dd6c24bcc4c650b94eaf5054da5b1cbec5d48db 852b36db64c8cbf603a329772f216a5944f523a4 8555874472569082926337b3316e4be949678b47 946910cba2690927236d190b38eff73db0f2e1a4 984d3d42eb8ec1cbb9138761678d79e0b7c6734c a5663b73491b28d6f1182f236a54a1140a7ea5cf ad7c79dc5b71ca0f540efd749ce06505abc9cb1f bcd755ac9e52e3a64e0d0ea368efc0f6caf466d6 bf2ec569144489d6bcb53668f1e364efec6f4c07 c3ca66ad1d0f0f2eb199e2767f1da06bda22b7a5 c76b881aaff9699b0d1e2c6c9fa8a7e8184d3862 cb68666e3167904f929f63e36d7a1c97969d93c6 d9a8e57eaefdfad9c8a1faab3f1ae0be0f0f7370 e3f679ec35624684e0899832a5a9983c37906f6b e6eea040c55e678a4366d0ae03ebe6cfaaf0e6c6 ebec1480664ea359617b7db0faeb0aafc9c8e7c7 ec4760c8b0e7274c099bf031410ceff6d4db1582 ee6f41bc200ab92f46e2b415b7b667c5ce8a2b28 f59b1a1583156a842e2330f6d093b8dbc80429be fbe5f6e8c6b92c8ccd8ebea9d4f916f6ac544c76 Package: libgtp-dbg Source: osmo-ggsn Version: 1.14.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 152 Depends: osmocom-nightly (= 202602051800), libgtp11 (= 1.14.0.202602051800) Filename: ./armhf/libgtp-dbg_1.14.0.202602051800_armhf.deb Size: 133336 MD5sum: cf05ad8c3fcb9c4d66d7bb5935073f11 SHA1: 8c06765c7b07cfc6ead86951c14ac719262a4b8d SHA256: dbaab3673c0b56c3510e63191395a76e1b28346920408b92db12143b9f748b24 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: Debug symbols for OsmoGGSN OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. . The library libgtp implements the GTP protocol between SGSN and GGSN and this package contains the development files for this library. Build-Ids: df5b11eaad7496187239a2e698d36b5fc604c3f7 Package: libgtp-dev Source: osmo-ggsn Version: 1.14.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 554 Depends: osmocom-nightly (= 202602051800), libgtp11 (= 1.14.0.202602051800) Filename: ./armhf/libgtp-dev_1.14.0.202602051800_armhf.deb Size: 170552 MD5sum: d9dfc448448c76eb5e0d82a42f464b24 SHA1: 2475ae5e2b392e952ae0fb1d722f674867c2763a SHA256: 1c79db661faea9a739b22549ac06f67f84fd4348d2ed96c494a130abeb082e25 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: Development files for libgtp OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. . The library libgtp implements the GTP protocol between SGSN and GGSN and this package contains the development files for this library. Package: libgtp11 Source: osmo-ggsn Version: 1.14.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 151 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.38), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libgtp11_1.14.0.202602051800_armhf.deb Size: 42924 MD5sum: e6274e7501368b112f1f0b69303967f8 SHA1: a64e1fc416a91060cc00e8119f0480aaa35186ce SHA256: 60d927eef64cb1630d887ef47a584f79b94003844554727e0ffa5b5810cc4fbe Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: library implementing the GTP protocol between SGSN and GGSN OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. . This library is part of OsmoGGSN and implements the GTP protocol between SGSN (Serving GPRS support node) and GGSN. Package: libgtpnl-dbg Source: libgtpnl Version: 1.3.3.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 77 Depends: osmocom-nightly (= 202602051800), libgtpnl0 (= 1.3.3.202602051800) Filename: ./armhf/libgtpnl-dbg_1.3.3.202602051800_armhf.deb Size: 41616 MD5sum: 55389ca34108620bccc96454d99fc160 SHA1: 79c01dfa2d0578d093c27977477157f6696576dd SHA256: c0de49f36943506f0776603b9a9ab67633ed9d81bdfc10e71c63a4f45dbb8682 Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/linux-kernel-gtp-u/wiki/Libgtpnl Description: Debug symbols for Linux kernel GTP-U netlink library Build-Ids: 883a8a18d77dd870d6813dc16e31a66b585b0473 a03c321deec390be5cf7dfd7987887f82427c87a ac4c200c80de79040791d75aa7bc46a43409d9fd Package: libgtpnl-dev Source: libgtpnl Version: 1.3.3.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 21 Depends: osmocom-nightly (= 202602051800), libmnl-dev, libgtpnl0 (= 1.3.3.202602051800) Filename: ./armhf/libgtpnl-dev_1.3.3.202602051800_armhf.deb Size: 4476 MD5sum: e8aed360e6b01bd283601806d6395423 SHA1: c094058559d3e5f1ae83d1931b15ff60c1472b36 SHA256: 1683f2d24dc3d5ffa816c2c7bed4fec8c11ecaa4ed135f67e23e7cdaddcab06b Section: libdevel Priority: optional Multi-Arch: same Homepage: https://osmocom.org/projects/linux-kernel-gtp-u/wiki/Libgtpnl Description: Development headers for Linux kernel GTP-U netlink library The header files provided by this package may be used to develop applications against the libgtpnl library. Package: libgtpnl-tools Source: libgtpnl Version: 1.3.3.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 141 Depends: osmocom-nightly (= 202602051800), libgtpnl0 (= 1.3.3.202602051800) Filename: ./armhf/libgtpnl-tools_1.3.3.202602051800_armhf.deb Size: 7564 MD5sum: 0925d2970e4b77b074092c9c10ab38f4 SHA1: 1acf73a78de8685f5ec6c41467ac68d34b642ced SHA256: 4c7818ec862504535f51a56566da8347f6ca32152c1dd2e9489af737e072714a Section: net Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/linux-kernel-gtp-u/wiki/Libgtpnl Description: Tools to manage gtp interfaces and tunnels. Package: libgtpnl0 Source: libgtpnl Version: 1.3.3.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 79 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~) Filename: ./armhf/libgtpnl0_1.3.3.202602051800_armhf.deb Size: 7964 MD5sum: 5b948bc2888bc06064e73f648bcff634 SHA1: 6d613d35febbc0e6e1fda3c480ac4b77bfd361c0 SHA256: 466a4fb7de99f112535afec016f2ea51297fa45a2450432373e54980faffb6c2 Section: libs Priority: optional Multi-Arch: same Homepage: https://osmocom.org/projects/linux-kernel-gtp-u/wiki/Libgtpnl Description: Linux kernel GTP-U netlink library Package: libifd-osmo-remsim-client0 Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 151 Depends: osmocom-nightly (= 202602051800), pcscd, libc6 (>= 2.34), libosmo-rspro2, libosmocore22, libosmogsm20, libosmonetif11, libtalloc2 (>= 2.0.4~git20101213) Suggests: pcsc-tools Provides: pcsc-ifd-handler Filename: ./armhf/libifd-osmo-remsim-client0_1.1.2.1.90c8.202602051800_armhf.deb Size: 36504 MD5sum: 250fb45ac99571c79549902534db6c05 SHA1: 1c6800d22de9977de61635cc3132462a1963cae4 SHA256: eb354246b14eaef8f1867a70d470f095159bb2136a38643f824785f579d15c95 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM Client - PC/SC driver This is an incarnation of osmo-remsim-client which can plug as ifd_handler driver into pcscd. This means you can use remote smart cards managed by osmo-remsim-server via normal PC/SC applications. Package: libifd-osmo-remsim-client0-dbgsym Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 85 Depends: libifd-osmo-remsim-client0 (= 1.1.2.1.90c8.202602051800) Filename: ./armhf/libifd-osmo-remsim-client0-dbgsym_1.1.2.1.90c8.202602051800_armhf.deb Size: 67124 MD5sum: aea00cbb46746a5f9781b05860f172ca SHA1: 110d236166df49a2984a08ee55389368b63f0a5f SHA256: d7e8653c6e99bf6d23d709ffa3c1b6742d5ca2ff7fdaa2a5f6e550c8423ed627 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libifd-osmo-remsim-client0 Build-Ids: 68b0fa428a1606e75260d49097117c59425c7bdf Package: libosmo-abis Version: 2.1.0.9.14ec.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 18 Depends: osmocom-nightly (= 202602051800), libosmoabis15 (= 2.1.0.9.14ec.202602051800), libosmotrau11 (= 2.1.0.9.14ec.202602051800) Filename: ./armhf/libosmo-abis_2.1.0.9.14ec.202602051800_armhf.deb Size: 10320 MD5sum: 6c5bc6f103f1edffecd4e8297527964a SHA1: 31f1a30bfd996a0c8f9ce217a9872fdd6560ca1a SHA256: 473bacfb23dc9a051828b1648d7f0d7faa2d179ce847107ccc357d70252f3af2 Section: oldlibs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: Legacy package for libosmo-abis libosmo-abis is an empty package helping in the transition to one package per DSO. Package: libosmo-abis-dbg Source: libosmo-abis Version: 2.1.0.9.14ec.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 398 Depends: osmocom-nightly (= 202602051800), libosmoabis15 (= 2.1.0.9.14ec.202602051800), libosmotrau11 (= 2.1.0.9.14ec.202602051800) Filename: ./armhf/libosmo-abis-dbg_2.1.0.9.14ec.202602051800_armhf.deb Size: 360040 MD5sum: fdd808e80b41a00bb1ec956696dcf892 SHA1: bdcd574853173b9683910f86492a484d4b3099b5 SHA256: a2736f005df3bdec0e70853dc8af2787922933a0dd8ffa0da18bb8a01e60ff2d Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: Debug symbols for A-bis interface The libosmo-abis library contains common/shared code regarding the A-bis interface between GSM BTS and BSC. This package in particular contains the debug symbols for the two libraries libosmoabis and libosmotrau. Build-Ids: c5f1c052312c3afd69ef09c452be17a493a3d323 df67127850d0f4d6f20175c62cdf64d26054e82b Package: libosmo-abis-dev Source: libosmo-abis Version: 2.1.0.9.14ec.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 480 Depends: osmocom-nightly (= 202602051800), libosmotrau11 (= 2.1.0.9.14ec.202602051800), libosmoabis15 (= 2.1.0.9.14ec.202602051800), libosmo-netif-dev (>= 1.7.0), libosmocore-dev (>= 1.12.0) Filename: ./armhf/libosmo-abis-dev_2.1.0.9.14ec.202602051800_armhf.deb Size: 128392 MD5sum: e0966cbbb8e97ff3c668b30ba5d1c00b SHA1: b970f9b5167d54c43c0c7673b3f3786336374a00 SHA256: ef48b1efda10ac0dfebd9e342c37576e1141d1663fe1e0985dfe243975784d9d Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: Development headers for A-bis interface The libosmo-abis library contains common/shared code regarding the A-bis interface between GSM BTS and BSC. This package in particular contains the development files needed to develop with the libosmoabis and libosmotrau libraries. Package: libosmo-asn1-tcap-dbg Source: libosmo-asn1-tcap Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 213 Depends: osmocom-nightly (= 202602051800), libosmo-asn1-tcap1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-asn1-tcap-dbg_0.2.1.202602051800_armhf.deb Size: 182460 MD5sum: a3e1282bf796646fb5b4c33d248743b4 SHA1: 8cbf4d0867bf96950b210afaaca2b5f310ea9a47 SHA256: a036447afa66154ab16480eb36133fc6d65e373c218561603c14f5f10f880d2e Section: debug Priority: extra Multi-Arch: same Homepage: https://gitea.osmocom.org/ss7-in-c/libosmo-asn1-tcap Description: Debug symbols for utility library for ASN.1 of TCAP (SS7) Build-Ids: 4e1e8042fa60d146fd54ec1acf017982c9653903 Package: libosmo-asn1-tcap-dev Source: libosmo-asn1-tcap Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 404 Depends: osmocom-nightly (= 202602051800), libosmo-asn1-tcap1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-asn1-tcap-dev_0.2.1.202602051800_armhf.deb Size: 67688 MD5sum: ff7a7f7adf7cc95c39323c95fd12e938 SHA1: c04bfb4bdd3cee0120a8278ba634757607fbcd89 SHA256: cc5dcf660c6276fd56a895c289bec1f3d38f9793575802bd61933ed10ad55726 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://gitea.osmocom.org/ss7-in-c/libosmo-asn1-tcap Description: Development headers for utility library for ASN.1 of TCAP (SS7) Package: libosmo-asn1-tcap1 Source: libosmo-asn1-tcap Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 150 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4) Filename: ./armhf/libosmo-asn1-tcap1_0.2.1.202602051800_armhf.deb Size: 29472 MD5sum: e6cff90330a52df6a64f8ffad7205ed8 SHA1: 3403b46195941f72813b74aeea7fab836b56a165 SHA256: 0776c04870889670f91fee48efcebf3b0805ced693b05fe864bb30bda00d2161 Section: libs Priority: optional Multi-Arch: same Homepage: https://gitea.osmocom.org/ss7-in-c/libosmo-asn1-tcap Description: Utility library for ASN.1 of TCAP (SS7) Package: libosmo-csn1-1 Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmocore22 Filename: ./armhf/libosmo-csn1-1_0.2.1.202602051800_armhf.deb Size: 25280 MD5sum: 586f84dd2466bb03b3b750cfe7b652da SHA1: 8bc92d292eeae75c27344b3c2c34483201c6624d SHA256: ae52894eac8bf88cb38358f88b83f678a2e3841ccc90eb267bb93e782c43cb54 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom CSN.1 codec library and message definition helpers This is a shared library containing the CSN.1 (Concrete Syntax Notation 1) codec and API for message definition. The implementation is based on the original code by Vincent Helfre and Jari Sassi. Package: libosmo-csn1-1-dbgsym Source: libosmo-gprs Version: 0.2.1.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 51 Depends: libosmo-csn1-1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-csn1-1-dbgsym_0.2.1.202602051800_armhf.deb Size: 38612 MD5sum: 5acfcbe7a3d4ac9b3eddb806bfd0d8cd SHA1: d63aa15933e516fd2d23c4dd064c19e2859efb0d SHA256: 986fdf45407c7d7401a75d861d4a38053b7e12d56b9e286e15e8b45da84a85f3 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-csn1-1 Build-Ids: a328394650094e74aa7e9474ec039a257bfd26be Package: libosmo-csn1-dbg Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202602051800), libosmo-csn1-1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-csn1-dbg_0.2.1.202602051800_armhf.deb Size: 9712 MD5sum: e13c469a1b24485a33651129a0b62f69 SHA1: c2cab22ba639dabb32c43eed548b9e7192fdc74d SHA256: 5f24ed6bd423cd5050eb8e58e8f9e7126355f9f1fdf70d9c31b65b411a78167f Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for the Osmocom CSN.1 codec library Package: libosmo-csn1-dev Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 101 Depends: osmocom-nightly (= 202602051800), libosmo-csn1-1 (= 0.2.1.202602051800), libosmocore-dev Filename: ./armhf/libosmo-csn1-dev_0.2.1.202602051800_armhf.deb Size: 30612 MD5sum: 800be4488d0eda191f4f8bedcc5ad478 SHA1: 2f74b23c2d6f926f177b209844d407b63f279467 SHA256: 35ee75b6fb7c5748edd08ff899212dde7d80e9d260657786eefddd68a7c09f88 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for the Osmocom CSN.1 codec Package: libosmo-e1d-dev Source: osmo-e1d Version: 0.7.2.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 54 Depends: osmocom-nightly (= 202602051800), libosmo-e1d3 (= 0.7.2.202602051800), libosmocore-dev Filename: ./armhf/libosmo-e1d-dev_0.7.2.202602051800_armhf.deb Size: 15720 MD5sum: 26911c19be911a7f1a522c5b02aa5056 SHA1: 05a36cf50c2be8bb9f9a4141abfe233550ff4a05 SHA256: 597762dfe184af407273f834b7b5dfe2d9e3485a4edaa0837621fcb374dd9515 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: Development headers for the osmo-e1d library. Package: libosmo-e1d3 Source: osmo-e1d Version: 0.7.2.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 85 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-e1d3_0.7.2.202602051800_armhf.deb Size: 13380 MD5sum: 831f69bf3c6202cacda904cff611e643 SHA1: df883ba6c1254cb105217f377ce2ba3d8a2ec5d5 SHA256: 0031ee4b42523b7df895a9c22d3540b8d87b38370ff46a1325eb1307fc77ad04 Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: Client library for talking to the Osmocom E1 interface daemon osmo-e1d. Package: libosmo-e1d3-dbgsym Source: osmo-e1d Version: 0.7.2.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 39 Depends: libosmo-e1d3 (= 0.7.2.202602051800) Filename: ./armhf/libosmo-e1d3-dbgsym_0.7.2.202602051800_armhf.deb Size: 25708 MD5sum: 9db9ce0bb9ccc7c635f1a8c508134061 SHA1: 555ccdf8edb6634f39faa07f49a77d976c2166ce SHA256: 8cd0f146dd64d8791918629d78d8e0e95db54bcb45518e9ecdd0e442c5b13716 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-e1d3 Build-Ids: 19ece80e1d7b4774978e5a6694176ca05125927b Package: libosmo-fl2k-dev Source: osmo-fl2k Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 40 Depends: osmocom-nightly (= 202602051800), libosmo-fl2k0 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-fl2k-dev_0.2.1.202602051800_armhf.deb Size: 10716 MD5sum: 8f1ed12b5f81fd8447a27091d48b4424 SHA1: 72d0a320176fff64732fdf55899afa41d551b31b SHA256: 818ce5cd0b7aba1fb9566fe9f8d930ff9f94ea5f5d2411b158a81c8584cd8024 Section: libdevel Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-fl2k Description: use a VGA USB adapter as DAC and SDR transmitter - development This software allows one to use USB 3.0 to VGA adapters based on the Fresco Logic FL2000 chip as general purpose DACs and SDR transmitter generating a continuous stream of samples by avoiding the HSYNC and VSYNC blanking intervals. . This package provides the development files. Package: libosmo-fl2k0 Source: osmo-fl2k Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 84 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libusb-1.0-0 (>= 2:1.0.22) Filename: ./armhf/libosmo-fl2k0_0.2.1.202602051800_armhf.deb Size: 9888 MD5sum: 6600696d416b6944afbe67f89b37c6b8 SHA1: 6a27a11c2906af5b175b844021ae7a514fa6e9fd SHA256: bc6fb4687ede7d12720bea5f5dfe2118b2d21d84be7fcde8621cf71b3f210058 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-fl2k Description: use a VGA USB adapter as DAC and SDR transmitter - library This software allows one to use USB 3.0 to VGA adapters based on the Fresco Logic FL2000 chip as general purpose DACs and SDR transmitter generating a continuous stream of samples by avoiding the HSYNC and VSYNC blanking intervals. . This package provides the shared library. Package: libosmo-fl2k0-dbgsym Source: osmo-fl2k Version: 0.2.1.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 34 Depends: libosmo-fl2k0 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-fl2k0-dbgsym_0.2.1.202602051800_armhf.deb Size: 20348 MD5sum: 25dd7e11f919f26bce3766f111f0f57d SHA1: f32f9cd5fd672d02d456c5c72140cb9a28805104 SHA256: 86516d5ceea8a9be3f9feb33255d1427417a44a98d341871648bd84e86fd9732 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-fl2k0 Build-Ids: 0c3725533f83caaecfc2dbe77d3a21456f9def3b Package: libosmo-gprs-gmm-dbg Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202602051800), libosmo-gprs-gmm1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-gprs-gmm-dbg_0.2.1.202602051800_armhf.deb Size: 9704 MD5sum: 98226295310b085ee8a8d246ef687a0f SHA1: 07ca22410c380df91461d5ce54438ee29f9be0f3 SHA256: 9d77e9d845e05d4c05c480c0cc253b36dafec939886fc2c8541c3be0fa49e463 Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-gmm Package: libosmo-gprs-gmm-dev Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 115 Depends: osmocom-nightly (= 202602051800), libosmo-gprs-gmm1 (= 0.2.1.202602051800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-gmm-dev_0.2.1.202602051800_armhf.deb Size: 32260 MD5sum: 0b3bb0dcafb5b1f34298d4527f48bc43 SHA1: d9850dca4b37f250594049060c44d35612fedbd6 SHA256: 114448a0f450bb0bb37e2c5a70a414c493cdf6c619e0d0ced780e63c76776e60 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-gmm Package: libosmo-gprs-gmm1 Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 89 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmo-gprs-llc1, libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-gmm1_0.2.1.202602051800_armhf.deb Size: 28440 MD5sum: 4f1b50c74b0641ab28fb228a0fbc0abe SHA1: bf51daa65e51968b22f031fce8be3fc99f92b16e SHA256: a68b26e748ac7ccd11871a25345a73bc863eabfc07d65c7eea5b8760d97fd7cb Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom GMM (GPRS Mobility Management) layer for GPRS and EGPRS Package: libosmo-gprs-gmm1-dbgsym Source: libosmo-gprs Version: 0.2.1.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 105 Depends: libosmo-gprs-gmm1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-gprs-gmm1-dbgsym_0.2.1.202602051800_armhf.deb Size: 87280 MD5sum: 7e34bd2a6cc50e1d2329b884de4afdbe SHA1: 361cf966837679063fd142fd2fe991e070a615f5 SHA256: 04088c6325b6efcc9134e25ccdd75980e949d4f27eb06e30d4b41b0ce79b51b7 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-gmm1 Build-Ids: 3724f135e0273c7c0ba7fb2d0c0650adfd6f7023 Package: libosmo-gprs-llc-dbg Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202602051800), libosmo-gprs-llc1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-gprs-llc-dbg_0.2.1.202602051800_armhf.deb Size: 9700 MD5sum: 060e5cb8e9f3aca617481c8631bb4ad2 SHA1: de7028e08fcb7482d4023272be309ba11df95b45 SHA256: a67e2dac720a3c69a7422ce6108f97b7ebace9efefebd49f1102f13cd2705101 Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-llc Package: libosmo-gprs-llc-dev Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 109 Depends: osmocom-nightly (= 202602051800), libosmo-gprs-llc1 (= 0.2.1.202602051800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-llc-dev_0.2.1.202602051800_armhf.deb Size: 33168 MD5sum: 8f133395d95e5a6bac6016d457efb31d SHA1: 05d7dcb4f39bb2d0868690209d11b324c5acedc7 SHA256: 985d05393e7bda767f9526c51c2f14d635f8dd8d3c9e20e2f1c50ab87d5d8543 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-llc Package: libosmo-gprs-llc1 Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-llc1_0.2.1.202602051800_armhf.deb Size: 29644 MD5sum: 4430a5d1e2a0b319fdc1fcc21a4bf67e SHA1: 3dbf278b43f1a0028d452a47b4f5387d26cbf15a SHA256: c5fc7daefdd9b86bd09abad2c205802b6c7b60fa6e936da39ff95668cb4f5d0d Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom LLC (Logical Link Control) layer for GPRS and EGPRS Package: libosmo-gprs-llc1-dbgsym Source: libosmo-gprs Version: 0.2.1.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 94 Depends: libosmo-gprs-llc1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-gprs-llc1-dbgsym_0.2.1.202602051800_armhf.deb Size: 78592 MD5sum: 39cce57288af605bc4007cc36c83e62f SHA1: ead05fdde1d7453a3e491ab4130fb06a0d22407c SHA256: 1b461841d083ca5e93474205af8ecf10be8ea35dfbdcc921361c86adf28d11a3 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-llc1 Build-Ids: cf0efe507c4df4c85cb1dd2c60959b4ec9365a49 Package: libosmo-gprs-rlcmac-dbg Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202602051800), libosmo-gprs-rlcmac1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-gprs-rlcmac-dbg_0.2.1.202602051800_armhf.deb Size: 9704 MD5sum: 2167676030373c8d07b42303a2f7a56e SHA1: 0ffbf52df0f1ee1e1772694e0666a219f159f61d SHA256: bf8c5af68e4fa03981b712c2732ba06a1a679a59ee6e17db6ec8c36cf3deda67 Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-rlcmac Package: libosmo-gprs-rlcmac-dev Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 521 Depends: osmocom-nightly (= 202602051800), libosmo-gprs-rlcmac1 (= 0.2.1.202602051800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-rlcmac-dev_0.2.1.202602051800_armhf.deb Size: 108088 MD5sum: cdca5c6f0c13bb5a1fc2ef178b68e199 SHA1: 9a8e2a55af4413dde81ed3a63fa6555c5e827c15 SHA256: 819e0b3af5ba54fb273f2bc06a88bee433e71b47563f37bdac5075d33a9e2830 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-rlcmac Package: libosmo-gprs-rlcmac1 Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 281 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmo-csn1-1, libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-rlcmac1_0.2.1.202602051800_armhf.deb Size: 76744 MD5sum: 1d0bb734b7ab309e9b798fc842b92e18 SHA1: 33776a83278fd6f22b98d18c72b3e85fa0a0e2da SHA256: e42ec56525f97c2bb76a61fc183949425ecdfa07449212148c85a4311c85e604 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom RLC/MAC codec and message definitions for GPRS and EGPRS Package: libosmo-gprs-rlcmac1-dbgsym Source: libosmo-gprs Version: 0.2.1.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 557 Depends: libosmo-gprs-rlcmac1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-gprs-rlcmac1-dbgsym_0.2.1.202602051800_armhf.deb Size: 521672 MD5sum: 2f7e7327ce9f86257f8e8759e9801f16 SHA1: 7356d678c778bd13ccf5afc26a02531363a72150 SHA256: 570f77050de7294841b1384867a2fc0b5585c898103fd8e582927e96c8173e09 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-rlcmac1 Build-Ids: 1ae9b9ff406010681597a531d1ce9f392703c131 Package: libosmo-gprs-sm-dbg Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202602051800), libosmo-gprs-sm1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-gprs-sm-dbg_0.2.1.202602051800_armhf.deb Size: 9700 MD5sum: 569af347211e058eb46ef79fdde00cea SHA1: f2c95f9edb13e7108d6bf01420bda50789a8cbfd SHA256: 173108e18b0686ba73f31e2fda50cc2bd3ce1cd4f43661cae3604c643f7246da Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-sm Package: libosmo-gprs-sm-dev Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 85 Depends: osmocom-nightly (= 202602051800), libosmo-gprs-sm1 (= 0.2.1.202602051800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-sm-dev_0.2.1.202602051800_armhf.deb Size: 26024 MD5sum: 0b5cca69c9796de89e0605d6674bf273 SHA1: 0e73ce0fc44b03fadf88cf56e29cfee2abd40ffc SHA256: 96cb2bd88dc671cfa421e385f479d0635686e2a5c2d2e31d5abbbc1aee4519ce Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-sm Package: libosmo-gprs-sm1 Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmo-gprs-gmm1, libosmo-gprs-sndcp1, libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-sm1_0.2.1.202602051800_armhf.deb Size: 22000 MD5sum: 8bd02d508f42d2ad2cb261eaa4b4471f SHA1: f894b616c761e9d15f855be3bcf5273785372c02 SHA256: 4c848a7e98c2812596e293adf5fb75993d2e79edf68d83447d4b7e1350c70148 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom SM (Session Management) layer for GPRS and EGPRS Package: libosmo-gprs-sm1-dbgsym Source: libosmo-gprs Version: 0.2.1.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 77 Depends: libosmo-gprs-sm1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-gprs-sm1-dbgsym_0.2.1.202602051800_armhf.deb Size: 61740 MD5sum: de06845a869ad942f3a9c780f9030338 SHA1: e35ff78b9fdcdec231aaadbed1fdafab87cd0bfd SHA256: d43bcad118fcb1c515c70c7293d1d3493320544f2f4ba87066b6587ef483eec2 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-sm1 Build-Ids: 2a83756b1b3a50e7f51b535deade603b3ed9c1e3 Package: libosmo-gprs-sndcp-dbg Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202602051800), libosmo-gprs-sndcp1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-gprs-sndcp-dbg_0.2.1.202602051800_armhf.deb Size: 9708 MD5sum: a9e394fa0d091b48a7d8f35cfe249b1e SHA1: f12d2b49f7116c18547396110ed259cfc4513d57 SHA256: fbfeb26279e97599e1c74c1c0f6923090fe76646895af81cd901ab1813402249 Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-sndcp Package: libosmo-gprs-sndcp-dev Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 146 Depends: osmocom-nightly (= 202602051800), libosmo-gprs-sndcp1 (= 0.2.1.202602051800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-sndcp-dev_0.2.1.202602051800_armhf.deb Size: 45456 MD5sum: 1c55aa858cee571052ddad32704ce7f2 SHA1: f4f9af690424dcc47375f54ab3e47c7e2e402b84 SHA256: 40b3d8591af2b27fd204a161cac147c226a15f6a2ccc0e71af244782abd64eec Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-sndcp Package: libosmo-gprs-sndcp1 Source: libosmo-gprs Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 152 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-sndcp1_0.2.1.202602051800_armhf.deb Size: 42280 MD5sum: dd408b2c6e87a0745d38b5f3b44d95e7 SHA1: d5f30d6b0fa9ba8921d695529cbbc8764ac3a183 SHA256: dc32f6a92e48bf983c7216ca44d551e10d641cb3162c2ebf7069da56bc8641c0 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom SNDCP (Subnetwork Dependent Convergence Protocol) layer for GPRS and EGPRS Package: libosmo-gprs-sndcp1-dbgsym Source: libosmo-gprs Version: 0.2.1.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 136 Depends: libosmo-gprs-sndcp1 (= 0.2.1.202602051800) Filename: ./armhf/libosmo-gprs-sndcp1-dbgsym_0.2.1.202602051800_armhf.deb Size: 120212 MD5sum: a92f58fd5bff8227b6dca622b228eb80 SHA1: d1a4086c5f429001c7c254cedbd4b52696b2dcd5 SHA256: 23ef19f170c2c56677bc1f7dea0e1b319047e48b226540b48c0d0219dc2d7af4 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-sndcp1 Build-Ids: 7a719ea7a4ecc32a2c44d07cfac0cc91ad57cac8 Package: libosmo-gsup-client-dev Source: osmo-hlr Version: 1.9.2.2.459a.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 77 Depends: osmocom-nightly (= 202602051800), libosmo-gsup-client0 (= 1.9.2.2.459a.202602051800), libosmocore-dev Filename: ./armhf/libosmo-gsup-client-dev_1.9.2.2.459a.202602051800_armhf.deb Size: 23644 MD5sum: 26bbd8c45b9a64947b734c41f48039a8 SHA1: 56ea955f338256acad8e744eaafedbb7c3346d72 SHA256: 541f27e31371b487b473f20f7c5caf325bcd1ec58a20dd79187abcd725cbd555 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Development headers of Osmocom GSUP client library This is a shared library that can be used to implement client programs for the GSUP protocol. The typical GSUP server is OsmoHLR, with OsmoMSC, OsmoSGSN and External USSD Entities (EUSEs) using this library to implement clients. . This package contains the development headers. Package: libosmo-gsup-client0 Source: osmo-hlr Version: 1.9.2.2.459a.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 86 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmoabis15, libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gsup-client0_1.9.2.2.459a.202602051800_armhf.deb Size: 19700 MD5sum: 8ec8328a732bb00d81e0533e792d4686 SHA1: d067689b3d2a295ec9aa70db4fa762f7d50db017 SHA256: 78ba04be8bb867d32be0e61782f974d59e7ac4e51dd18d4c42aa12cb1f734263 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Osmocom GSUP (General Subscriber Update Protocol) client library This is a shared library that can be used to implement client programs for the GSUP protocol. The typical GSUP server is OsmoHLR, with OsmoMSC, OsmoSGSN and External USSD Entities (EUSEs) using this library to implement clients. Package: libosmo-gtlv-dbg Source: libosmo-pfcp Version: 0.6.0.1.0383.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 55 Depends: osmocom-nightly (= 202602051800), libosmo-gtlv1 (= 0.6.0.1.0383.202602051800) Filename: ./armhf/libosmo-gtlv-dbg_0.6.0.1.0383.202602051800_armhf.deb Size: 41448 MD5sum: 78bd7ac0843290f01e48b9cf1cf2f2dc SHA1: c88e2e37919620555e14679ac3d379744c7d55c7 SHA256: 6861375f298bd43e3c981f6bbbe2ccdb977df7cc9c47a54efea4d39d5020b5e2 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Debug symbols for libosmo-gtlv libosmo-gtlv implements decoding, encoding and logging of protocols using a Tag-Length-Value and/or Tag-Length-Instance-Value structure. This package in particular contains the debug symbols for this library. Build-Ids: c173ce158725f9ed3a807cc6625424dcd6d6f48b Package: libosmo-gtlv-dev Source: libosmo-pfcp Version: 0.6.0.1.0383.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 184 Depends: osmocom-nightly (= 202602051800), libosmo-gtlv1 (= 0.6.0.1.0383.202602051800), libosmocore-dev (>= 1.12.0), libtalloc-dev (>= 2.1.0) Filename: ./armhf/libosmo-gtlv-dev_0.6.0.1.0383.202602051800_armhf.deb Size: 55688 MD5sum: 4ac5b8fd8f891d3799112a1e4f3a1e2d SHA1: f9a4ac6481be51875905c24834bb2c0aba346efc SHA256: 07f739adaadce86242ccdc7dd6c6fb34d9b0bdfb9260551707a77df085024460 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Development files for libosmo-gtlv libosmo-gtlv implements decoding, encoding and logging of protocols using a Tag-Length-Value and/or Tag-Length-Instance-Value structure. This package in particular contains the files for compiling a program using this library. Package: libosmo-gtlv1 Source: libosmo-pfcp Version: 0.6.0.1.0383.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 81 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmo-gtlv1_0.6.0.1.0383.202602051800_armhf.deb Size: 15104 MD5sum: 10058064144debd96a9048704a8fab6b SHA1: 27ddfbc143afbf5de2a6d7af0e314d742dec12ca SHA256: 342443d38d2c2afea3427fcc82175b8f0a019112c7412c06e9e0897c32436d05 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Generic TLV and TLIV protocol support Decoding, encoding and logging of protocols using a Tag-Length-Value and/or Tag-Length-Instance-Value structure. Package: libosmo-hnbap-dbg Source: osmo-iuh Version: 1.8.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 301 Depends: osmocom-nightly (= 202602051800), libosmo-hnbap0 (= 1.8.0.202602051800) Filename: ./armhf/libosmo-hnbap-dbg_1.8.0.202602051800_armhf.deb Size: 198456 MD5sum: 15074157b4521539af530182838cd3f6 SHA1: 70551e72b5a13302525ffd8f9bdcdc786722d58c SHA256: 019596e10239c330c18479d5a8d40868e2fb2072e6e5eb03dbb8c3e0eff26847 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Build-Ids: d31dc28f34344fa03516c7d21efcb22598930892 Package: libosmo-hnbap-dev Source: osmo-iuh Version: 1.8.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 257 Depends: osmocom-nightly (= 202602051800), libosmo-hnbap0 (= 1.8.0.202602051800) Filename: ./armhf/libosmo-hnbap-dev_1.8.0.202602051800_armhf.deb Size: 25496 MD5sum: 5b66b5448b6bdf535881048dce4833aa SHA1: 755a453d397ce809831477e9c009997142cf3e23 SHA256: 90d2ff49f254b81f6258fa20da53b095d46c3cd5ef6b44fac9622937b9ee208b Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-hnbap0 Source: osmo-iuh Version: 1.8.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 297 Depends: osmocom-nightly (= 202602051800), libasn1c1, libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-hnbap0_1.8.0.202602051800_armhf.deb Size: 44880 MD5sum: b57bae2eae776742941b8e306a87d89f SHA1: 8fb0956c24937f791d8998838848d86e190f59ac SHA256: 500c984d3d6447973a00216c0708c20a68c13344005d9c0dc8243427939f28b8 Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-iuh-dev Source: osmo-iuh Version: 1.8.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 19 Depends: osmocom-nightly (= 202602051800) Filename: ./armhf/libosmo-iuh-dev_1.8.0.202602051800_armhf.deb Size: 7436 MD5sum: 420f33666ad8713090d868b5046e7ac9 SHA1: 9aefca03a6329188bdf85a50fb03bda787c9942a SHA256: caf1a004699fd8b84b7f3407b68a1e0ad588e458a93f2de0fd415c784b548a56 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (common header files) Package: libosmo-mgcp-client-dev Source: osmo-mgw Version: 1.15.0.1.8afba.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 181 Depends: osmocom-nightly (= 202602051800), libosmo-mgcp-client14 (= 1.15.0.1.8afba.202602051800) Filename: ./armhf/libosmo-mgcp-client-dev_1.15.0.1.8afba.202602051800_armhf.deb Size: 60212 MD5sum: f5b1d948e65edf1564e82682f8b42710 SHA1: 36c2634ba791e15a9fbe73195ee42a2d229a5d3c SHA256: 4bf0484793b787fc490dc2e1c4f2088c407869a0803bdbf6797208f330294f1e Section: libdevel Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/osmo-mgw Description: libosmo-mgcp-client: Osmocom's Media Gateway Control Protocol client utilities Package: libosmo-mgcp-client14 Source: osmo-mgw Version: 1.15.0.1.8afba.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 159 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.7), libosmocore22, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-mgcp-client14_1.15.0.1.8afba.202602051800_armhf.deb Size: 55112 MD5sum: 81ef66727d3dc654ed06ac7aab5ffaae SHA1: 40f83d61531a90c267088da90ecd115e69ec31d3 SHA256: 22549fa99500de85ab939711b03734c0876a3c866139b5d8bbcf76c14087dd9e Section: libs Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/osmo-mgw Description: libosmo-mgcp-client: Osmocom's Media Gateway Control Protocol client utilities Package: libosmo-mgcp-client14-dbgsym Source: osmo-mgw Version: 1.15.0.1.8afba.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 122 Depends: libosmo-mgcp-client14 (= 1.15.0.1.8afba.202602051800) Filename: ./armhf/libosmo-mgcp-client14-dbgsym_1.15.0.1.8afba.202602051800_armhf.deb Size: 102560 MD5sum: dd361419af12f1f8d0490cf84a5ba93d SHA1: 0624faacc013fe5b6661fc61fa7ed44716605fb6 SHA256: 8fb4963aa2c1a798d7be44d90dfd59be3a311a4810f6893439354a382a6e38b0 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-mgcp-client14 Build-Ids: 7bc09260e203d1afec54017decbd9d0d3530eea0 Package: libosmo-mslookup-dev Source: osmo-hlr Version: 1.9.2.2.459a.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 97 Depends: osmocom-nightly (= 202602051800), libosmo-mslookup1 (= 1.9.2.2.459a.202602051800), libosmocore-dev Filename: ./armhf/libosmo-mslookup-dev_1.9.2.2.459a.202602051800_armhf.deb Size: 28164 MD5sum: fa10348e01a2b15ca612b95be42c9768 SHA1: cfbe2bedf7b1998d43173417553bb8ff8dd0c698 SHA256: 929ac88f9b5423f61888325dcb6f1115c76310d106427946c71219d1db7f22cf Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Development headers of Osmocom MS lookup library This shared library contains routines for looking up mobile subscribers. . This package contains the development headers. Package: libosmo-mslookup1 Source: osmo-hlr Version: 1.9.2.2.459a.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 85 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-mslookup1_1.9.2.2.459a.202602051800_armhf.deb Size: 21604 MD5sum: 0f9e30597d4533ce180a73762b7633f2 SHA1: bb4bc1ae68ce9712f9e72402b2c6d5d11385be5b SHA256: 0e615b1202901bc4503117a2a0bdb4d6095a966003c81e69473ccb052838a45b Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Osmocom MS lookup library This shared library contains routines for looking up mobile subscribers. Package: libosmo-netif-dbg Source: libosmo-netif Version: 1.7.0.7.1d56.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 234 Depends: osmocom-nightly (= 202602051800), libosmonetif11 (= 1.7.0.7.1d56.202602051800) Filename: ./armhf/libosmo-netif-dbg_1.7.0.7.1d56.202602051800_armhf.deb Size: 202428 MD5sum: 325db05ede5a42cf05a77cd78eeefac8 SHA1: beb36ccb783e5e156937ebea3afbf3f6c07ef94e SHA256: 422107c30d9e3c34c5dc45b565e939efac2da9df0ce84ea39e708d4609f4e024 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-netif Description: Debug symbols for Osmocom network interface library The libosmo-netif library is one of the libraries needed by the OpenBSC GSM infrastructure software. This library in particular implements the shared code for network interfaces. . This package contains the debug symbols for the library. Build-Ids: ff5dbe8f3fc7be75db7e606f83234fe930ebd404 Package: libosmo-netif-dev Source: libosmo-netif Version: 1.7.0.7.1d56.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 305 Depends: osmocom-nightly (= 202602051800), libosmocore-dev, libosmocore, libosmonetif11 (= 1.7.0.7.1d56.202602051800) Filename: ./armhf/libosmo-netif-dev_1.7.0.7.1d56.202602051800_armhf.deb Size: 83696 MD5sum: ef2efc642bdbdf1e03f0e5644fa40300 SHA1: d3a5d89ce668361e6f8529893259c9b7d5543566 SHA256: 34b40adf77bfd527ec8c1d003a7bc9eac0d23de257c20b5111917311e66186d1 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-netif Description: Development headers for Osmocom network interface The libosmo-netif library is one of the libraries needed by the OpenBSC GSM infrastructure software. This library in particular implements the shared code for network interfaces. . This package contains the development files needed for developing with the libosmo-netif library. Package: libosmo-netif-doc Source: libosmo-netif Version: 1.7.0.7.1d56.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 2099 Depends: osmocom-nightly (= 202602051800), libosmonetif11, libjs-jquery Filename: ./all/libosmo-netif-doc_1.7.0.7.1d56.202602051800_all.deb Size: 190304 MD5sum: f18be7a74e0f8a5f9e5c1e109d751898 SHA1: f712d51458d0f053afdb460d4db178a50e0346bd SHA256: ad4344b75e6e795f7e63af52cc4b82696934c19a88db354cc56ee69de5c2731f Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmo-netif Description: Documentation for the Osmo network interface library The libosmo-netif library is one of the libraries needed by the OpenBSC GSM infrastructure software. This library in particular implements the shared code for network interfaces. . This package contains the documentation for the libosmo-netif library. Package: libosmo-octoi-dev Source: osmo-e1d Version: 0.7.2.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 113 Depends: osmocom-nightly (= 202602051800), libosmo-octoi3 (= 0.7.2.202602051800), libosmocore-dev Filename: ./armhf/libosmo-octoi-dev_0.7.2.202602051800_armhf.deb Size: 32796 MD5sum: 5dcc625e1dac95b29f4b14c0889113a1 SHA1: 74917fe9582c5fad66f774dffe54a4c4558500de SHA256: b41d4f088c5d0c5a3a6c9836ed85324adc571ec37bf0aadbce903a5421e8720a Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: Development headers for the Osmocom Community TDMoIP library. Package: libosmo-octoi3 Source: osmo-e1d Version: 0.7.2.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 86 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmocore22, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-octoi3_0.7.2.202602051800_armhf.deb Size: 28320 MD5sum: 399e2315ded8e2e5f2c4e9fbf01cd038 SHA1: ca52a452242ee9686969b0e407458db299dc7bb6 SHA256: eb57b755fde535a25368a30cb803efb6c97f6d35d512a6c4ffc11d7db80f28a7 Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: Library for the Osmocom Community TDMoIP network. Package: libosmo-octoi3-dbgsym Source: osmo-e1d Version: 0.7.2.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 111 Depends: libosmo-octoi3 (= 0.7.2.202602051800) Filename: ./armhf/libosmo-octoi3-dbgsym_0.7.2.202602051800_armhf.deb Size: 92380 MD5sum: dc754c1ed4c2f29d64328ec56dcc38fa SHA1: ab4e7d9d0757c700e4a987ad611782a632a3a609 SHA256: 8f2c5f01eaad38fa634ec1690d64c2a61204299d28297607c4898c605cf856ce Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-octoi3 Build-Ids: 89d5dd90d591ca60e4ba9e05383b77be0c547059 Package: libosmo-pfcp Version: 0.6.0.1.0383.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 10 Depends: osmocom-nightly (= 202602051800), libosmo-gtlv1 (= 0.6.0.1.0383.202602051800), libosmo-pfcp4 (= 0.6.0.1.0383.202602051800) Filename: ./armhf/libosmo-pfcp_0.6.0.1.0383.202602051800_armhf.deb Size: 3968 MD5sum: 407ceed3c6ab5751b4ec37081e8eacc7 SHA1: 1b7dffd507cd99ab424c4194c6b9b7e7c3d3028c SHA256: 4389cc9c2c37df2863ca6ff38716617379b457fb8557f167e85ea6e668952aa7 Section: libs Priority: optional Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Osmocom PFCP protocol implementation (metapackage) Install Osmocom PFCP and generic TLV protocol libraries. Package: libosmo-pfcp-dbg Source: libosmo-pfcp Version: 0.6.0.1.0383.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 159 Depends: osmocom-nightly (= 202602051800), libosmo-pfcp4 (= 0.6.0.1.0383.202602051800) Filename: ./armhf/libosmo-pfcp-dbg_0.6.0.1.0383.202602051800_armhf.deb Size: 136544 MD5sum: 7f2fe96ac4f3122cd83d06d08876f5a6 SHA1: 44df5e935d3d20b477069b6b110740c2875318e0 SHA256: 5d5e4dba8cac187ae2cc58074f2729daf5b396dd1e6b26ed6119abb446672dc8 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Debug symbols for libosmo-pfcp libosmo-pfcp implements decoding, encoding and endpoint implementation of the Packet Forwarding Control Protocol (3GPP TS 29.244). This package in particular contains the debug symbols for this library. Build-Ids: 87d43601e497669e2fba4d82745a8ac0a808e207 Package: libosmo-pfcp-dev Source: libosmo-pfcp Version: 0.6.0.1.0383.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 697 Depends: osmocom-nightly (= 202602051800), libosmo-pfcp4 (= 0.6.0.1.0383.202602051800), libosmo-gtlv-dev (= 0.6.0.1.0383.202602051800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-pfcp-dev_0.6.0.1.0383.202602051800_armhf.deb Size: 172296 MD5sum: abc53a516802312a62c1ae7bc8f8a07e SHA1: 1eadf8b7b541f086b023e52878cd0f335030421e SHA256: 3f0eb9bfed7c468a2b344ef34f63ace98207b87b1eb9f1fd7678cfddf87c547e Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Development files for libosmo-pfcp libosmo-pfcp implements decoding, encoding and endpoint implementation of the Packet Forwarding Control Protocol (3GPP TS 29.244). This package in particular contains the files for compiling a program using this library. Package: libosmo-pfcp4 Source: libosmo-pfcp Version: 0.6.0.1.0383.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 146 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmo-gtlv1 (= 0.6.0.1.0383.202602051800), libosmocore22, libosmogsm20, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmo-pfcp4_0.6.0.1.0383.202602051800_armhf.deb Size: 36816 MD5sum: 32786eb826d183e7681788f083e2ff80 SHA1: 9258e5b6db5143f7d0a50e398b2e2112ff477548 SHA256: c83da767837523b3a92a01dfd73a84e16d0c60b9d8cd6a7190b06c8589402959 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: PFCP protocol support Decoding, encoding and endpoint implementation of the Packet Forwarding Control Protocol (3GPP TS 29.244). Package: libosmo-ranap-dbg Source: osmo-iuh Version: 1.8.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1495 Depends: osmocom-nightly (= 202602051800), libosmo-ranap7 (= 1.8.0.202602051800) Filename: ./armhf/libosmo-ranap-dbg_1.8.0.202602051800_armhf.deb Size: 1007412 MD5sum: b4fd5d288eea7123f60b3f5e88103556 SHA1: e8ca1bb02774f811f86b73721e9a322a355d9e97 SHA256: fec2e6a2b05a30a66a9d8697ff3d820d6d31bcf222c228001e9923a8e86ed485 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Build-Ids: 6b08f4473d084c1a610a56c47212432dbe5c7f0d Package: libosmo-ranap-dev Source: osmo-iuh Version: 1.8.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1311 Depends: osmocom-nightly (= 202602051800), libosmo-ranap7 (= 1.8.0.202602051800), libosmo-iuh-dev Filename: ./armhf/libosmo-ranap-dev_1.8.0.202602051800_armhf.deb Size: 92944 MD5sum: 00f936d4dddc26a69be0bf2561b5f993 SHA1: 7e3ddf71ab932daa6d3d0691bfb8df0c981d85c6 SHA256: a39ba8af8eac8726de1f1b0c631a1790aecbd37ce1bb02942cd36c02041978f6 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-ranap7 Source: osmo-iuh Version: 1.8.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1401 Depends: osmocom-nightly (= 202602051800), libasn1c1, libc6 (>= 2.4), libosmo-sigtran12, libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-ranap7_1.8.0.202602051800_armhf.deb Size: 187924 MD5sum: 99f3607a94a600537caa66b476d8361a SHA1: b752e472f866be3abb3eb85665d2f2f3723149c5 SHA256: 82095df7fa806f2a102e8acd11601edc0f5d5b263ad30ce5fe4a6b3516a2f51a Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-rspro-dev Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 298 Depends: osmocom-nightly (= 202602051800) Filename: ./armhf/libosmo-rspro-dev_1.1.2.1.90c8.202602051800_armhf.deb Size: 63088 MD5sum: 0673f2e078fc2bd5bfeb2477a5bfedbd SHA1: 88591cbc83a344a99f1177c3dec7ffde685f9801 SHA256: 2fabdb6facc2183459d9fc79f3b89173b9b4001c037dfdcf7fd782df38eecb3b Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Shared Library Development Haders libosmo-rsrpo is an utility library for encoding/decoding the ASN.1 BER based RSPRO (Remote SIM Protocol) protocol used between the osmo-remsim programs. Package: libosmo-rspro2 Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 220 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-rspro2_1.1.2.1.90c8.202602051800_armhf.deb Size: 55376 MD5sum: 73a4d24138b43a7fb9e765a3f98736ab SHA1: fd37ddab3d09834832be6b71bfae30b3a4382a30 SHA256: 96f4f36178e279a5c57dc91d1e80a3c841d7e7a9d5d6c82b6c7268574f9c3811 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Shared Library libosmo-rsrpo is an utility library for encoding/decoding the ASN.1 BER based RSPRO (Remote SIM Protocol) protocol used between the osmo-remsim programs. Package: libosmo-rspro2-dbgsym Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 251 Depends: libosmo-rspro2 (= 1.1.2.1.90c8.202602051800) Filename: ./armhf/libosmo-rspro2-dbgsym_1.1.2.1.90c8.202602051800_armhf.deb Size: 214240 MD5sum: 8b385b3daf819ac4ccc13589880fb9d2 SHA1: b292f5387a1cee0aa5ef5d64b21bdb405a9f7b39 SHA256: 3e8d2257dbf49fd94c5f700fe11b298cd94722ed1a3a0246c6a95336116f6aa8 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-rspro2 Build-Ids: 6d4b9b6fe5009c703d6603d4d43467df110e35c2 Package: libosmo-rua-dbg Source: osmo-iuh Version: 1.8.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 141 Depends: osmocom-nightly (= 202602051800), libosmo-rua0 (= 1.8.0.202602051800) Filename: ./armhf/libosmo-rua-dbg_1.8.0.202602051800_armhf.deb Size: 95852 MD5sum: de871f1ee7f4a1efd64bbebb310f9969 SHA1: 0e31dba33a7e6d6998e78f6833bcad745f875830 SHA256: 6cb84d12d643f4d1fa001a2ca855f5928762675cb50fa1b1a23f26a343ba1c94 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Build-Ids: f51d51e1d50185745dff8a425633ba84c2fcee64 Package: libosmo-rua-dev Source: osmo-iuh Version: 1.8.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 101 Depends: osmocom-nightly (= 202602051800), libosmo-rua0 (= 1.8.0.202602051800) Filename: ./armhf/libosmo-rua-dev_1.8.0.202602051800_armhf.deb Size: 15372 MD5sum: 944ec7d168a50d5e03b4982f6f6c51af SHA1: 0033a8e3a2d36507339bf7b1ba14e06f9ebb8da0 SHA256: e53f417dfe3f8dbd8194d848d3825a6656c99b24708e7048af2db454f56b9c83 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-rua0 Source: osmo-iuh Version: 1.8.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 157 Depends: osmocom-nightly (= 202602051800), libasn1c1, libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-rua0_1.8.0.202602051800_armhf.deb Size: 25508 MD5sum: a20da446681d1330588d9b81c33dec3c SHA1: 4016944f0d27299b20fdd8d57d2d6396a46d76f5 SHA256: a79db12b93aa99527d7cf3eb6ada08b3787a457a5611ad50201daf9d24c0f16e Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-sabp-dbg Source: osmo-iuh Version: 1.8.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 192 Depends: osmocom-nightly (= 202602051800), libosmo-sabp1 (= 1.8.0.202602051800) Filename: ./armhf/libosmo-sabp-dbg_1.8.0.202602051800_armhf.deb Size: 125720 MD5sum: 714fb679ae7d2fd02d559136fcdaceaf SHA1: da1b75077668e9b3c31aab80cbeaa54f946a0df1 SHA256: 777a38d8521e517d3e4e98999b9f724a9abe5191b6985eec4ff5e29e257aec61 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (SABP) Build-Ids: e2b502de64658fd46a65571d29583f6d81062fe5 Package: libosmo-sabp-dev Source: osmo-iuh Version: 1.8.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 158 Depends: osmocom-nightly (= 202602051800), libosmo-sabp1 (= 1.8.0.202602051800) Filename: ./armhf/libosmo-sabp-dev_1.8.0.202602051800_armhf.deb Size: 18428 MD5sum: 63adc911e9ad58ced53ae23c488938a2 SHA1: 7543a6a99ea5a96afe42186d0fc2d6b16e3678c5 SHA256: 9e0d21772a8af4c0de76d27f5d0d64d16bdef57abfe31b85f0ab1a7eeb0d1e7f Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (SABP) Package: libosmo-sabp1 Source: osmo-iuh Version: 1.8.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 224 Depends: osmocom-nightly (= 202602051800), libasn1c1, libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-sabp1_1.8.0.202602051800_armhf.deb Size: 31912 MD5sum: b9c66eb3895dad10cc458c6f463d3deb SHA1: 251777a28152acb5b44a4b954a3b82f02b23ec5b SHA256: 7527d15edc209572ec1b0bde12fa040c16dc5f4d69d564ed3d9e6732c668f213 Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (SABP) Package: libosmo-sbcap-dev Source: osmo-cbc Version: 0.5.2.4.2463.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 3542 Depends: osmocom-nightly (= 202602051800), libosmo-sbcap2 (= 0.5.2.4.2463.202602051800) Filename: ./armhf/libosmo-sbcap-dev_0.5.2.4.2463.202602051800_armhf.deb Size: 513592 MD5sum: e64b19c7dc4fa1e124ad6b52aa89d279 SHA1: 2d8569975e29309d33e842c7da4edcf2a6765e05 SHA256: d26c4ecaa25e48a2f1e54dc562297b3d5e91e32e0caaf5b1180f00315ef8fe3d Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: libosmo-sbcap: Osmocom's library to encode/decode SBc-AP messages Package: libosmo-sbcap2 Source: osmo-cbc Version: 0.5.2.4.2463.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1914 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmocore22 Filename: ./armhf/libosmo-sbcap2_0.5.2.4.2463.202602051800_armhf.deb Size: 345828 MD5sum: 8ed1f8faeff531d72cca3209480f0e0f SHA1: f4106110cb51fca7eb4ee5497a16f998d9515019 SHA256: be614841dfed73e72a54980907e1725dc12a5a14e26eb501cca798e906de550d Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: libosmo-sbcap: Osmocom's library to encode/decode SBc-AP messages Package: libosmo-sigtran-dbg Source: libosmo-sigtran Version: 2.2.1.13.3b4d.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 685 Depends: osmocom-nightly (= 202602051800), libosmo-sigtran12 (= 2.2.1.13.3b4d.202602051800) Filename: ./armhf/libosmo-sigtran-dbg_2.2.1.13.3b4d.202602051800_armhf.deb Size: 634752 MD5sum: f99c22351cb9002c5e0ff88516331a1c SHA1: 81de9838f8af1f8842a44f93d70a260180241896 SHA256: 425c223d87254bf97e2caf3d5c8fd65efcfff709873c3289d22e93d05e4c6eb5 Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Documentation for the Osmocom SIGTRAN library libosmo-sigtran is a shared library containing SS7/SIGTRAN related functionality, including connection-less and connection-oriented SCCP as per ITU-T Q.71x, M3UA (MTP3 User Adaptation) according to IETF RFC4666, SUA (SCCP User Adpatation) according to IETF RFC3868 as well as MTP-level routing function and handling of signaling links, linksets, ASPs, SGs, etc. Build-Ids: c5ebd4154d8ff26ebfe76ba80bc09a11bf8507e2 Package: libosmo-sigtran-dev Source: libosmo-sigtran Version: 2.2.1.13.3b4d.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2790 Depends: osmocom-nightly (= 202602051800), libosmo-sigtran12 (= 2.2.1.13.3b4d.202602051800), libosmocore-dev, libosmo-asn1-tcap-dev, libosmo-netif-dev Filename: ./armhf/libosmo-sigtran-dev_2.2.1.13.3b4d.202602051800_armhf.deb Size: 789000 MD5sum: 86e486b23788ea7e6ae8977d5744921f SHA1: bba79869ef9a92f7c57ead59929177f63375fef9 SHA256: 8aa25d8095674c4af7c62c910a1a66997221efeb115b598a1e24fad3b6a9ef25 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Development headers for the Osmocom SIGTRAN library libosmo-sigtran is a shared library containing SS7/SIGTRAN related functionality, including connection-less and connection-oriented SCCP as per ITU-T Q.71x, M3UA (MTP3 User Adaptation) according to IETF RFC4666, SUA (SCCP User Adpatation) according to IETF RFC3868 as well as MTP-level routing function and handling of signaling links, linksets, ASPs, SGs, etc. Package: libosmo-sigtran-doc Source: libosmo-sigtran Version: 2.2.1.13.3b4d.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 11878 Depends: osmocom-nightly (= 202602051800), libosmo-sigtran12 (= 2.2.1.13.3b4d.202602051800), libjs-jquery Filename: ./all/libosmo-sigtran-doc_2.2.1.13.3b4d.202602051800_all.deb Size: 610916 MD5sum: 1dd4a9f42aaa641b54173fcb9adb82c8 SHA1: 8daaebda0705afcb349135dda7be8fc5cb65e8ba SHA256: 64dcb070b8f7be616bf1998fe3bbc7b34e077b40e5acdad8eef6b5ce42de329f Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Documentation for the Osmocom SIGTRAN library libosmo-sigtran is a shared library containing SS7/SIGTRAN related functionality, including connection-less and connection-oriented SCCP as per ITU-T Q.71x, M3UA (MTP3 User Adaptation) according to IETF RFC4666, SUA (SCCP User Adpatation) according to IETF RFC3868 as well as MTP-level routing function and handling of signaling links, linksets, ASPs, SGs, etc. Package: libosmo-sigtran12 Source: libosmo-sigtran Version: 2.2.1.13.3b4d.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 484 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmo-asn1-tcap1, libosmocore22, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-sigtran12_2.2.1.13.3b4d.202602051800_armhf.deb Size: 144988 MD5sum: 93c14900d9c54c149eac11840165f7f2 SHA1: 9596c67cae40736fe3c0feb3d93b956ee9888bbc SHA256: 231c435b6b1172944f8f5104ac0ce7af288f1cde9785967998fd9254290ddfba Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Osmocom SIGTRAN library (SCCP, SUA, M3UA and more) This is a shared library containing SS7/SIGTRAN related functionality, including connection-less and connection-oriented SCCP as per ITU-T Q.71x, M3UA (MTP3 User Adaptation) according to IETF RFC4666, SUA (SCCP User Adpatation) according to IETF RFC3868 as well as MTP-level routing function and handling of signaling links, linksets, ASPs, SGs, etc. Package: libosmo-simtrace2-1 Source: simtrace2 Version: 0.9.0.1.d0ad.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 82 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmocore22, libosmosim2, libusb-1.0-0 (>= 2:1.0.8) Filename: ./armhf/libosmo-simtrace2-1_0.9.0.1.d0ad.202602051800_armhf.deb Size: 12760 MD5sum: 8d19559e4d46541b98a2cb5d3e836d70 SHA1: fa044d0ef9600260cd08d6e39477df781fe6c598 SHA256: 8c92a2b780c6d5618efee42bce50f564c1fa3ee8fee94ba07d70e4d1e0121e5f Section: libs Priority: optional Multi-Arch: same Homepage: http://osmocom.org/projects/simtrace2/wiki Description: Osmocom SIMtrace2 library This library contains core "driver" functionality to interface with the Osmocom SIMtrace2 (and compatible) USB device firmware. It enables applications to implement SIM card / smart card tracing as well as SIM / smart card emulation functions. Package: libosmo-simtrace2-1-dbgsym Source: simtrace2 Version: 0.9.0.1.d0ad.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 39 Depends: libosmo-simtrace2-1 (= 0.9.0.1.d0ad.202602051800) Filename: ./armhf/libosmo-simtrace2-1-dbgsym_0.9.0.1.d0ad.202602051800_armhf.deb Size: 25944 MD5sum: a8d209053a882843a150739e07fa9eb9 SHA1: 92e26c43b21c5c5dff6fe9835c3a5eca470942c2 SHA256: e807027471c57f365aa3cf67b21f7c96c6f2bb2d4c354ef2192a42f81de235a8 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-simtrace2-1 Build-Ids: 1a52475b765ab497062389212d1d4fd758fd7aa1 Package: libosmo-simtrace2-dev Source: simtrace2 Version: 0.9.0.1.d0ad.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 60 Depends: osmocom-nightly (= 202602051800), libosmo-simtrace2-1 Filename: ./armhf/libosmo-simtrace2-dev_0.9.0.1.d0ad.202602051800_armhf.deb Size: 18360 MD5sum: 5ee112826904a28c500ce4cdbd0ebe52 SHA1: b6b5f747d2972bed56ea74b74e941ef199571b76 SHA256: 7f881816a8a6e3a78b01098633e0fd0450d58fb12eefb0be1e564627e3a254d4 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://osmocom.org/projects/simtrace2/wiki Description: Development headers for Osmocom SIMtrace2 library This library contains core "driver" functionality to interface with the Osmocom SIMtrace2 (and compatible) USB device firmware. It enables applications to implement SIM card / smart card tracing as well as SIM / smart card emulation functions. . The header files provided by this package may be used to develop with any of the libosmocore libraries. . Also static libraries are installed with this package. Package: libosmoabis15 Source: libosmo-abis Version: 2.1.0.9.14ec.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 218 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libosmoisdn0, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmoabis15_2.1.0.9.14ec.202602051800_armhf.deb Size: 64300 MD5sum: 7db2ed69473f130b4a59d29abceda88c SHA1: 8893e35b8cce3782be4b9fc505b92df6b716935f SHA256: f92bb17fce46c27eedad1f328cecb0e142ce0a8a4bccbd9551ec5c0153ce1e65 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: GSM A-bis handling This library contains common/shared code regarding the A-bis interface between the GSM Base transceiver station (BTS) and the GSM Base station controller BSC. . It also implements drivers for mISDN and DAHDI based E1 cards, as well as some A-bis/IP dialects. Package: libosmocodec-doc Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 4221 Depends: osmocom-nightly (= 202602051800), libosmocodec4, libjs-jquery Filename: ./all/libosmocodec-doc_1.12.0.69.2b29.202602051800_all.deb Size: 476136 MD5sum: c84ff4e8d860007481f438569bb78b57 SHA1: 93ee112d907a116c8b850f9a2e2844527b46b1ec SHA256: c61441a759d12eba991215d981d0f3eba1cfe7307c994bb453defe95e88f552d Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the osmo codec library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmocodec library. Package: libosmocodec4 Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 125 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmocore22 Filename: ./armhf/libosmocodec4_1.12.0.69.2b29.202602051800_armhf.deb Size: 53412 MD5sum: 7107c3b7b6de7c9114476473e8d39340 SHA1: b2be8eda5c00ed2af730bf5c30fe1c27ec4814ba SHA256: 0323b97ce9543f4c03d15a3559010f620e226991e3ae0229e089579cd7d3d1d1 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo codec library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmocodec library in particular contains the implementation of multiple GSM codecs: . - GSM 06.10 - GSM FR Codec - GSM 06.20 - GSM HR Codec - GSM 06.60 - GSM EFR Codec - GSM 06.90 - GSM AMR Codec Package: libosmocoding-doc Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 5271 Depends: osmocom-nightly (= 202602051800), libosmocoding0, libjs-jquery Filename: ./all/libosmocoding-doc_1.12.0.69.2b29.202602051800_all.deb Size: 524964 MD5sum: 59247cd8545b0e46a0e4e67a5a833ba8 SHA1: de95955af8db825732f60206774ba71153bb5aae SHA256: 2000849970b5840da33350d4097573b881c2cea09a11937b6f3e4e21d3388335 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the osmo coding library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmocoding library. Package: libosmocoding0 Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 189 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmocodec4, libosmocore22, libosmogsm20 Filename: ./armhf/libosmocoding0_1.12.0.69.2b29.202602051800_armhf.deb Size: 70628 MD5sum: 5da4cf13934c247acf201f06286a63e4 SHA1: bfa9c4714403273429e7ad543af641298706f6e7 SHA256: 781cee7c7bf401954cd165714c14c741c0489e81649abc7b87c489117b51b297 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo coding library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmocoding library in particular contains the implementation of GSM, GPRS and EDGE transcoding routines, migrated from OsmoBTS. Package: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 63 Depends: osmocom-nightly (= 202602051800), libosmocodec4 (= 1.12.0.69.2b29.202602051800), libosmocoding0 (= 1.12.0.69.2b29.202602051800), libosmocore22 (= 1.12.0.69.2b29.202602051800), libosmogb14 (= 1.12.0.69.2b29.202602051800), libosmogsm20 (= 1.12.0.69.2b29.202602051800), libosmoisdn0 (= 1.12.0.69.2b29.202602051800), libosmovty13 (= 1.12.0.69.2b29.202602051800), libosmoctrl0 (= 1.12.0.69.2b29.202602051800), libosmosim2 (= 1.12.0.69.2b29.202602051800), libosmousb0 (= 1.12.0.69.2b29.202602051800) Filename: ./armhf/libosmocore_1.12.0.69.2b29.202602051800_armhf.deb Size: 45408 MD5sum: 135ec61612381517ddae32604698ea0a SHA1: b094aa7fc93241e9bc2b6f3449c47fdaaecb7ff5 SHA256: 14ad2193cf632660c1ba45bcbc67de92b37ec8c4bf463e5e1f6fd56a37b36709 Section: libs Priority: optional Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/libosmocore Description: Open Source MObile COMmunications CORE library (metapackage) The libraries provided by this package contain various utility functions. These were originally developed as part of the OpenBSC project but are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. Package: libosmocore-dbg Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2413 Depends: osmocom-nightly (= 202602051800), libosmocore (= 1.12.0.69.2b29.202602051800) Filename: ./armhf/libosmocore-dbg_1.12.0.69.2b29.202602051800_armhf.deb Size: 2157720 MD5sum: 8eff42b34a4782a82a13ea26ea3f82e6 SHA1: 4f37939ae2f0b9deedd5e44a858e9af1dfa48314 SHA256: aed2d191a29edca5220efacccd51d66c4bdb587fd1a1d40ffc947f4b48419869 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Debug symbols for Open Source MObile COMmunications CORE library This proackage contains debug symbols for all the libraries that are part of libosmocore. . The libosmocore library contain various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. Build-Ids: 13deab0099654b8712b03a1f367fc3039a7f6979 24dde9f6b7d7584dfe133c78f892bb17818e5415 4ae2cd4c9995f56c4686fded065ce173d40504c9 6249ba7af9dee5c8e6afd879043c39a9784bf89e 63bed5168975ffcc1e6eadc3b47cc0010a61e1c1 84ac02f4faffd4badf1a9602a57f5b093f3fd503 8ee44dab812b8615600d27790c21901ca5b8b5c2 9856756e6695c2abe4315c1e49a566ee384dd7a0 ba5e51fbb9968d362cf2ebd6d4c38e4d25400726 c597604ed747e74c1660d4b42da3282900c228ee cdd52b41d7f07330f637953eff71c940f715fa27 d4f2d476a3cbe980998146d0a20c3777bcae186e df2b16727d03f8302d5620d8d7d28a0de359c990 e1a50ef5a32fd2e27b940a704b4032fbac130f96 ef33f0efea736e1ad0b331e2d9cf5e411925839a Package: libosmocore-dev Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 3358 Depends: osmocom-nightly (= 202602051800), libosmocore, libtalloc-dev (>= 2.1.0), libsctp-dev, libusb-1.0-0-dev, libmnl-dev Filename: ./armhf/libosmocore-dev_1.12.0.69.2b29.202602051800_armhf.deb Size: 797512 MD5sum: 8423db7c19c7fe7d5fd0ee02c362ab2c SHA1: 217a86b0e0aae3459f315902aeeac460fb770ded SHA256: 5e5ea8772f52583208837b6cd4dc206710f73fa3bb234a141949b9332596c28f Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Development headers for Open Source MObile COMmunications CORE library The header files provided by this package may be used to develop with any of the libosmocore libraries. . Also static libraries are installed with this package. Package: libosmocore-doc Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 17447 Depends: osmocom-nightly (= 202602051800), libosmocore22, libjs-jquery, libosmocodec-doc, libosmocoding-doc, libosmogsm-doc, libosmoisdn-doc, libosmovty-doc, libosmoctrl-doc, libosmogb-doc, libosmosim-doc, libosmousb-doc Filename: ./all/libosmocore-doc_1.12.0.69.2b29.202602051800_all.deb Size: 1063860 MD5sum: 0972ff8ec7d21db3becb2ffeb940056d SHA1: 78b2ef23e843c66563a03b1788d50400afa06368 SHA256: f74c8b34b3492435a720d4db3aff00195cabb3e83ec131ec6f418048cf67eae8 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo Core library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmocore library. Package: libosmocore-utils Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 389 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libtalloc2 (>= 2.1.0), python3, libosmocore Filename: ./armhf/libosmocore-utils_1.12.0.69.2b29.202602051800_armhf.deb Size: 58156 MD5sum: 21bfa9c4adb48edfda3f223ca284532c SHA1: 269916f510514da0de2938099077e4953507df03 SHA256: c7f91a098f2b0c6c5da16f8ee0e2ff6e837988a09158ab2e264fd298bcbc0d4e Section: utils Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Utilities for gsm This package contains a program for frequency calculation for GSM called 'osmo-arfcn' and a program called 'osmo-auc-gen' that is used for testing GSM authentication, as well as 'osmo-config-merge', a tool for merging Osmocom configuration files. . They use the libosmocore library. The libosmocore library contain various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. Package: libosmocore22 Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 381 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.38), libmnl0 (>= 1.0.3-4~), libsctp1 (>= 1.0.12+dfsg), libsystemd0, libtalloc2 (>= 2.1.0), liburing2 (>= 2.3) Filename: ./armhf/libosmocore22_1.12.0.69.2b29.202602051800_armhf.deb Size: 151200 MD5sum: 5e47b34cd3bf679bab819e03f53f83ac SHA1: 35d476ed4f3169c4bc91c643415d3cd0581e0a34 SHA256: 57ec180deaf2df74f338ec5dbda7d9367f8452c7ead7fe7ba0651b32d8a5137c Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo Core library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmocore library in particular is a collection of common code used in various sub-projects inside the Osmocom family of projects. Package: libosmoctrl-doc Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 3745 Depends: osmocom-nightly (= 202602051800), libosmoctrl0, libjs-jquery Filename: ./all/libosmoctrl-doc_1.12.0.69.2b29.202602051800_all.deb Size: 454816 MD5sum: 056879abc3dd3bf39adc7bc222e03e16 SHA1: b4d9dd9c4a8a6e80156dab7db7a9f335e3ffc28b SHA256: 203727323b2f904b48d79bfcf1444fea1ecec438694a14fc55ff3b0ddad58840 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmocom CTRL library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmoctrl library. Package: libosmoctrl0 Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 125 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmoctrl0_1.12.0.69.2b29.202602051800_armhf.deb Size: 59448 MD5sum: 0eb498601bc0418b85d794c2ac37a18e SHA1: 6d399506c5809b3f5c2ad3613d484d2c8f2ac41c SHA256: f1d9b7a4ea3fa0609ee0d23d2510994bc65da0022c4e9367da9d3cebcc2773b6 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo control library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmoctrl library in particular contains an SNMP-like status interface. Package: libosmodsp-dbg Source: libosmodsp Version: 0.4.0.12.f6f4.202602051800 Architecture: armhf Maintainer: Harald Welte Installed-Size: 36 Depends: osmocom-nightly (= 202602051800), libosmodsp0 (= 0.4.0.12.f6f4.202602051800) Filename: ./armhf/libosmodsp-dbg_0.4.0.12.f6f4.202602051800_armhf.deb Size: 21700 MD5sum: a7f1c20df803ba8a35f8f1d71f2afb21 SHA1: e485feb22cac65116c608862da1e25a526b5f10b SHA256: 4051102853ac84e79dc45501e230f5db6d3467345889ae4572f4e3cf2908f426 Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/libosmo-dsp Description: Debug symbols for Osmocom DSP library C-language library for common DSP (Digital Signal Processing) primitives for SDR (Software Defined Radio). They are part of the Osmocom (Open Source Mobile Communications) project. . This package contains the debug symbols for the library. Build-Ids: 01ded41626721cd4bbb0187ff48a69a9a4e46ba0 Package: libosmodsp-dev Source: libosmodsp Version: 0.4.0.12.f6f4.202602051800 Architecture: armhf Maintainer: Harald Welte Installed-Size: 45 Depends: osmocom-nightly (= 202602051800), libosmodsp0 (= 0.4.0.12.f6f4.202602051800) Filename: ./armhf/libosmodsp-dev_0.4.0.12.f6f4.202602051800_armhf.deb Size: 11196 MD5sum: ab0d79a6e235f97fd820b8174a453669 SHA1: 22ae4bc1ca7cb8595660b6abd3bb1d552bb612bb SHA256: 20fb9a2ce29a70e7cf9d3ddac2670737e0e9d92361e54e9c9222d2e690cfdb54 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://osmocom.org/projects/libosmo-dsp Description: Development headers for Osmocom DSP Library C-language library for common DSP (Digital Signal Processing) primitives for SDR (Software Defined Radio). They are part of the Osmocom (Open Source Mobile Communications) project. . This package contains the development files needed for developing with the libosmodsp library. Package: libosmodsp-doc Source: libosmodsp Version: 0.4.0.12.f6f4.202602051800 Architecture: all Maintainer: Harald Welte Installed-Size: 917 Depends: osmocom-nightly (= 202602051800), libosmodsp0, libjs-jquery Filename: ./all/libosmodsp-doc_0.4.0.12.f6f4.202602051800_all.deb Size: 117336 MD5sum: 21f090df2b2c763c1ee0c1f604a1cbba SHA1: b2f0790c0280afcaf6485935254f011da50e0e9c SHA256: 23f82c135027cb290eca9ccf49c408b56a75a6342c1e7e6d046c74d2276a8234 Section: doc Priority: optional Homepage: https://osmocom.org/projects/libosmo-dsp Description: Documentation for the Osmocom DSP Library C-language library for common DSP (Digital Signal Processing) primitives for SDR (Software Defined Radio). They are part of the Osmocom (Open Source Mobile Communications) project. . This package contains the documentation for the libosmodsp library. Package: libosmodsp0 Source: libosmodsp Version: 0.4.0.12.f6f4.202602051800 Architecture: armhf Maintainer: Harald Welte Installed-Size: 80 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libfftw3-single3 (>= 3.3.10) Filename: ./armhf/libosmodsp0_0.4.0.12.f6f4.202602051800_armhf.deb Size: 8948 MD5sum: 1a8d250e54c6a8f653d0f8485eb0ba81 SHA1: 839534a2050af5389ae7b1eefec93e50f68354cf SHA256: 4ed091c48c623063a898e41bfba1809bafc0fed1094da94ed3e71c831bb01c5a Section: libs Priority: optional Multi-Arch: same Homepage: https://osmocom.org/projects/libosmo-dsp Description: Osmocom Software Defined Radio Digital Signal Processing Library C-language library for common DSP (Digital Signal Processing) primitives for SDR (Software Defined Radio). They are part of the Osmocom (Open Source Mobile Communications) project. Package: libosmogb-doc Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 13745 Depends: osmocom-nightly (= 202602051800), libosmogb14, libjs-jquery Filename: ./all/libosmogb-doc_1.12.0.69.2b29.202602051800_all.deb Size: 872924 MD5sum: 7dff5e11cb021c143acb30d6fd60d7e5 SHA1: e73e085c3f122c8a4c5e30ddecd5bebd3dd153af SHA256: c0bec6e69de34c2f3bd02b0d30000e6c891c5b67825e4e3ed92fc869675fc5c9 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo GPRS Gb library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmogb library. Package: libosmogb14 Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 449 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmogb14_1.12.0.69.2b29.202602051800_armhf.deb Size: 159548 MD5sum: d4a9ea3763323c4ddd46030438bb423a SHA1: 50fd798ce5182d84698782b99cc075fb5fc6a08e SHA256: 9c7fbbb5172ffaeba1dfe4820f568d06a9b3854bba97145bea2a53db06a533f9 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo GPRS GB library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmogb library in particular contains a GPRS BSSGP protocol implementation. Package: libosmogsm-doc Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 34994 Depends: osmocom-nightly (= 202602051800), libosmogsm20, libjs-jquery Filename: ./all/libosmogsm-doc_1.12.0.69.2b29.202602051800_all.deb Size: 2145596 MD5sum: c1d43ba365764917a2ce43ed3b8e36e8 SHA1: 59c9ae7d9fa88fc35fbdd6296c323dc020e95e28 SHA256: f3b5432e13e83cece3783b73bc73cb0167c3a41f1639f0114116985982e6e48c Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo GSM utility library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmogsm library. Package: libosmogsm20 Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 573 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libgnutls30t64 (>= 3.7.2), libosmocore22, libosmoisdn0, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmogsm20_1.12.0.69.2b29.202602051800_armhf.deb Size: 198248 MD5sum: 790baf0f5a9697071a30939c9b0cfa8e SHA1: 712be9c4b09c36b30a2f08e5337fe7d2e6bfa15d SHA256: 289b3e0246863f1e900ec7d22ded3e0d046058a8527863daba6afc63d3dcd449 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo GSM utility library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmogsm library in particular is a collection of common code used in various GSM related sub-projects inside the Osmocom family of projects. It includes A5/1 and A5/2 ciphers, COMP128v1, a LAPDm implementation, a GSM TLV parser, SMS utility routines as well as protocol definitions for a series of protocols. Package: libosmoisdn-doc Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 3646 Depends: osmocom-nightly (= 202602051800), libosmoisdn0, libjs-jquery Filename: ./all/libosmoisdn-doc_1.12.0.69.2b29.202602051800_all.deb Size: 374172 MD5sum: aec440a8aa6c66ec98dcf0003e6cd7f8 SHA1: eb5c705f0c297c94e98550809e4f0874329b6782 SHA256: 836ba9b01fa27b00621707388a62794a1aee10edb5971927952503a4a79aae0e Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo ISDN utility library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmoisdn library. Package: libosmoisdn0 Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 125 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmoisdn0_1.12.0.69.2b29.202602051800_armhf.deb Size: 69076 MD5sum: 13f704c181797745b5521cd5a3d1156a SHA1: cbe1e60c1c9cbe2deab3d44bb724923a8ad98bee SHA256: 7617e6774f43e54b745de432000402e05719b53440c2aeb1dc26badda7fe6645 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo ISDN utility library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmoisdn library in particular is a collection of common code used in various ISDN related sub-projects inside the Osmocom family of projects. It includes an I.460 sub-channel multiplex and a generic LAPD core. Package: libosmonetif11 Source: libosmo-netif Version: 1.7.0.7.1d56.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 215 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libosmovty13, libsctp1 (>= 1.0.10+dfsg), libtalloc2 (>= 2.0.4~git20101213) Conflicts: libosmonetif2 Filename: ./armhf/libosmonetif11_1.7.0.7.1d56.202602051800_armhf.deb Size: 62240 MD5sum: 4aa48d2880a24fbe271027f152d58c3a SHA1: b81124d167c958632f6b0f774c5498c4a88eabbe SHA256: 7407cc82f7021b0576525511f0b4d04e42940ac1fbf027db14f3629e79906334 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-netif Description: Common/shared code regarding network interface for OpenBSC The libosmo-netif library is one of the libraries needed by the OpenBSC GSM infrastructure software. This library in particular implements the shared code for network interfaces. Package: libosmosim-doc Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 2225 Depends: osmocom-nightly (= 202602051800), libosmosim2, libjs-jquery Filename: ./all/libosmosim-doc_1.12.0.69.2b29.202602051800_all.deb Size: 242296 MD5sum: 19cdcfad548ffc125cea318e2cf4a632 SHA1: f4844835d6577e6e9104c29d19eff654a8f01de2 SHA256: a75f1126797d091816d29410b0b3d37e4d30a53b9cdf8bf728f0767ebdb622c9 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo SIM library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmosim library. Package: libosmosim2 Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 189 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmocore22, libosmogsm20, libpcsclite1 (>= 1.5.0), libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmosim2_1.12.0.69.2b29.202602051800_armhf.deb Size: 61928 MD5sum: d2ccd9b4cdaa3ce3b31618c9f61ac170 SHA1: 28c5b4fd35ab97f8141fb3189948b0a626d20ee9 SHA256: 358227bd7c7adebc0009b680296ecd650c118811c142d54f52ade4d8a13e4d4f Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo SIM library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmosim library in particular contains routines for SIM card access. Package: libosmotrau11 Source: libosmo-abis Version: 2.1.0.9.14ec.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 181 Depends: osmocom-nightly (= 202602051800), libbctoolbox2 (>= 5.3.104), libbctoolbox2 (<< 5.4.0), libc6 (>= 2.4), libortp16 (>= 1:5.3.0), libortp16 (<< 1:5.4.0), libosmocodec4, libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmotrau11_2.1.0.9.14ec.202602051800_armhf.deb Size: 44300 MD5sum: fba5c8821a1dd5bd6521a4312c3046d9 SHA1: 85ac9a73f277ddd66393a457541618ec23e5092d SHA256: 548549f7eb56389a043141a969691f1ea990e0e10fa07b7b0149669e1eeb2b37 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: GSM trau handling This library implements the Transcoder and Rate Adaptation Unit (TRAU) for GSM systems. It is closely related to the libosmo-abis library. . TRAU performs transcoding function for speech channels and rate adaptation (RA) for data channels in the GSM network. Package: libosmousb-doc Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 1066 Depends: osmocom-nightly (= 202602051800), libosmousb0, libjs-jquery Filename: ./all/libosmousb-doc_1.12.0.69.2b29.202602051800_all.deb Size: 185036 MD5sum: de91ace9fcdbc5de16777e484e236f5d SHA1: 2bfa3570810025aacaccc48e0777944861634c7d SHA256: 52c7600a72cdcbb7f17d162a6c59d32e0e30f94be8d15b7d7b2066c305db659d Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo USB library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmousb library. Package: libosmousb0 Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 125 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.1.0), libusb-1.0-0 (>= 2:1.0.20) Filename: ./armhf/libosmousb0_1.12.0.69.2b29.202602051800_armhf.deb Size: 51260 MD5sum: 288b240c7cfb0e7d7c0bfe02d45045ad SHA1: a22c78e056916866c3521726f344bf9b720523e2 SHA256: d2432f9e12a9bf7cfb0ae0ed97a2a2a3348b9e4c42870116462fefe795327986 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo USB library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmosub library in particular contains routines for USB device access via libusb-1.0, integrated into the libosmocore select event loop. Package: libosmovty-doc Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 7328 Depends: osmocom-nightly (= 202602051800), libosmovty13, libjs-jquery Filename: ./all/libosmovty-doc_1.12.0.69.2b29.202602051800_all.deb Size: 642888 MD5sum: 9ed2c681eb3420dd2847e3579b0724ba SHA1: c35ede92bc7b77a87246b187f2fdf1d4e5ed8ec9 SHA256: f8ef7811073ec6ffe92c99f0675de048940056a283894d687b469b3d7d145d93 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo VTY library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmovty library. Package: libosmovty13 Source: libosmocore Version: 1.12.0.69.2b29.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 259 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.38), libosmocore22, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmovty13_1.12.0.69.2b29.202602051800_armhf.deb Size: 97632 MD5sum: b36b173d93d1c217cb95b0558d7ed883 SHA1: 82166ba3f7258dc409098733b390b722b1de8f31 SHA256: 5132d740decc3e800487ee858253820077dfe1c82f9b286b3ce71c09249bf6b1 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo VTY library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmovty library in particular implements the interactive command-line on the VTY (Virtual TTY) as well as configuration file parsing. Package: librtlsdr-dev Source: rtl-sdr Version: 2.0.2.2.ae0d.202602051800 Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 119 Depends: osmocom-nightly (= 202602051800), librtlsdr0 (= 2.0.2.2.ae0d.202602051800), libusb-1.0-0-dev Filename: ./armhf/librtlsdr-dev_2.0.2.2.ae0d.202602051800_armhf.deb Size: 31672 MD5sum: 819b15c5ca25efbdcca0746e0c7f36a2 SHA1: ff0d474bbcf2bbb43762fd36e331cff9ceb2e37a SHA256: 9e0e1c362be331d813625c0cbc6c2ee36c5f5ae7c817dae2cf4f9845282aec1e Section: libdevel Priority: optional Homepage: http://sdr.osmocom.org/trac/wiki/rtl-sdr Description: Software defined radio receiver for Realtek RTL2832U (development) rtl-sdr is a software defined radio (SDR) receiver software for certain low-cost DVB-T/DAB(+) USB dongles based on the Realtek RTL2832U chip. . This package contains development files. Package: librtlsdr0 Source: rtl-sdr Version: 2.0.2.2.ae0d.202602051800 Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 108 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4), libusb-1.0-0 (>= 2:1.0.21) Filename: ./armhf/librtlsdr0_2.0.2.2.ae0d.202602051800_armhf.deb Size: 26304 MD5sum: 994ebe66c530a6c7b14728c1c39d7880 SHA1: e5991e5cfca0e56cb937bbb242ca32e3f1786340 SHA256: 91d45638df8325696e5dae8be499566883a97d059c67f4aeb8ea769f13b01b21 Section: libs Priority: optional Multi-Arch: same Homepage: http://sdr.osmocom.org/trac/wiki/rtl-sdr Description: Software defined radio receiver for Realtek RTL2832U (library) rtl-sdr is a software defined radio (SDR) receiver software for certain low-cost DVB-T/DAB(+) USB dongles based on the Realtek RTL2832U chip. . This package contains the shared library. Package: librtlsdr0-dbgsym Source: rtl-sdr Version: 2.0.2.2.ae0d.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 109 Depends: librtlsdr0 (= 2.0.2.2.ae0d.202602051800) Filename: ./armhf/librtlsdr0-dbgsym_2.0.2.2.ae0d.202602051800_armhf.deb Size: 91664 MD5sum: b38b469415d351053c4ac06c44cba6b7 SHA1: 52a385759d7b67df7f71e1767797093aa1527997 SHA256: c6c0d770bc49ac484320e698e4df46b98800f8643f388c32614986193604b2db Section: debug Priority: optional Multi-Arch: same Description: debug symbols for librtlsdr0 Build-Ids: 54550a830377e1af97dbc8e887afb7af81f4f3cb Package: libsmpp1 Source: libsmpp34 Version: 1.14.5.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 401 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.4) Filename: ./armhf/libsmpp1_1.14.5.202602051800_armhf.deb Size: 88612 MD5sum: 46c55d108fc16bf3d9de8dab45b6bc1f SHA1: a8f7c30ece5e31837ce4eff3acfbaa0b2e9cb186 SHA256: 12a14beb46193da046b722fe657aba7fd99f61c8bfa6e8f73066220180306ce4 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libsmpp34 Description: Open PDU SMPP packaging and unpackaging tool This library is an implementation for providing the PDU handling of the SMPP-3.4 protocol. SMPP (Short Message Peer-to-Peer) is an open industry standard protocol designed to provide a flexible data communication interface for the transfer of short message data between External Short Messaging Entities, Routing Entitites and Message Centres. Package: libsmpp34-dbg Source: libsmpp34 Version: 1.14.5.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 527 Depends: osmocom-nightly (= 202602051800), libsmpp1 (= 1.14.5.202602051800) Filename: ./armhf/libsmpp34-dbg_1.14.5.202602051800_armhf.deb Size: 517628 MD5sum: 17b894caa33911f67108fa327b1fa551 SHA1: 57f3b4c0762941eef785b338a5d2a73f0f8e1677 SHA256: 32a7986a5915399dcb3e764ae59670037ef62bf0c1fa8e51e9887ec11db2e8e5 Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/libsmpp34 Description: Debug symbols for libsmpp34 Build-Ids: 9a6ba8f6a4d63a53a5c5cbec72d0155880536ada Package: libsmpp34-dev Source: libsmpp34 Version: 1.14.5.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 452 Depends: osmocom-nightly (= 202602051800), libsmpp1 (= 1.14.5.202602051800) Filename: ./armhf/libsmpp34-dev_1.14.5.202602051800_armhf.deb Size: 73652 MD5sum: 5cb857cc6f363fc3c630fb101e0572d7 SHA1: 92638597151d6a8b2a5b069c71a6ba1959bf460b SHA256: 445c7f63fcc33cb2a74b977fef91aa89d1af04e0e0a050c54d451dddd9e74ed0 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libsmpp34 Description: Development files for libsmpp34 This library is an implementation for providing the PDU handling of the SMPP-3.4 protocol. SMPP (Short Message Peer-to-Peer) is an open industry standard protocol designed to provide a flexible data communication interface for the transfer of short message data between External Short Messaging Entities, Routing Entitites and Message Centres. . This package contains the development files for the library. Package: libsmpp34-utils Source: libsmpp34 Version: 1.14.5.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 10 Depends: osmocom-nightly (= 202602051800) Filename: ./armhf/libsmpp34-utils_1.14.5.202602051800_armhf.deb Size: 2920 MD5sum: 077e4350f81fe48188aac3dd91c9538b SHA1: 38a67dec020777199244a44f2c4180a3ce9cff94 SHA256: 053d848986e61901b5c3c54289e278172eacc6716ad1da7a8f48cd278ffba58e Section: libs Priority: optional Homepage: https://projects.osmocom.org/projects/libsmpp34 Description: Utilities for SMPP Package: libstrongswan Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2631 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.38), libcap2 (>= 1:2.10), libgmp10 (>= 2:6.3.0+dfsg), libsystemd0 (>= 227) Recommends: libstrongswan-standard-plugins Suggests: libstrongswan-extra-plugins Filename: ./armhf/libstrongswan_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 365244 MD5sum: a150d96934009fec120fc951fe176088 SHA1: cccec090a62ac42417fad227c23b69e76593a6d1 SHA256: 15173258082edf74c2df747adc65ea02fa187f327561657c0e5deb10af96b6cd Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan utility and crypto library The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides the underlying libraries of charon and other strongSwan components. It is built in a modular way and is extendable through various plugins. . Some default (as specified by the strongSwan projet) plugins are included. For libstrongswan (cryptographic backends, URI fetchers and database layers): - aes (AES-128/192/256 cipher software implementation) - constraints (X.509 certificate advanced constraint checking) - dnskey (Parse RFC 4034 public keys) - drbg (NIST SP-800-90A Deterministic Random Bit Generator) - fips-prf (PRF specified by FIPS, used by EAP-SIM/AKA algorithms) - gmp (RSA/DH crypto backend based on libgmp) - hmac (HMAC wrapper using various hashers) - md5 (MD5 hasher software implementation) - mgf1 (Mask Generation Functions based on the SHA-1, SHA-256 and SHA-512) - nonce (Default nonce generation plugin) - pem (PEM encoding/decoding routines) - pgp (PGP encoding/decoding routines) - pkcs1 (PKCS#1 encoding/decoding routines) - pkcs8 (PKCS#8 decoding routines) - pkcs12 (PKCS#12 decoding routines) - pubkey (Wrapper to handle raw public keys as trusted certificates) - random (RNG reading from /dev/[u]random) - rc2 (RC2 cipher software implementation) - revocation (X.509 CRL/OCSP revocation checking) - sha1 (SHA1 hasher software implementation) - sha2 (SHA256/SHA384/SHA512 hasher software implementation) - sshkey (SSH key decoding routines) - x509 (Advanced X.509 plugin for parsing/generating X.509 certificates/CRLs and OCSP messages) - xcbc (XCBC wrapper using various ciphers) - attr (Provides IKE attributes configured in strongswan.conf) - kernel-netlink [linux] (IPsec/Networking kernel interface using Linux Netlink) - kernel-pfkey [kfreebsd] (IPsec kernel interface using PF_KEY) - kernel-pfroute [kfreebsd] (Networking kernel interface using PF_ROUTE) - resolve (Writes name servers received via IKE to a resolv.conf file or installs them via resolvconf(8)) Package: libstrongswan-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 1628 Depends: libstrongswan (= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/libstrongswan-dbgsym_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 1411544 MD5sum: ffe57f230cd85d3026d5b7c2586ab92d SHA1: 6c499ea4ca8cb4f41c92701e436d2c3347e3d3ee SHA256: 5a5c11f912956e2442a75443db1698e9ecc0b3ed98a629ebff678be1631dd12b Section: debug Priority: optional Description: debug symbols for libstrongswan Build-Ids: 06f97e0598992644fda2578b32e60a2bcc093228 08ed3744a26823d512502f647c7a0b7e74b2fe3f 0f1f366fc6761e76c88187076ddd8e8027120407 112a32389a6e390177e84ee675faa14ffd62951a 25bb583efdb6c3cfb239071e78ba8538272a497e 2ef7a0f67268c7ad50c3b3e1f3ad60ce0f55c4f5 3212556a30683e301b988d907f3fae7e7c2b6320 34973e48b3bb1e6efb0acd42622aa004ce37649c 3e15465712d5f2a7698a5c6f1b4dfe1c865b4429 42ad2e06f63f8c69a8119fccbd1980eaf3543d8c 42f03eeafbf3d3a30a922e0678c6e6aa5a9217f9 45fb19b30039dffdafb52e548c782ba748082e57 4aa5cbea3faebfd191f20925aef5f33cd5fc783f 6b5276b661c7c1afa36219255d323ac3596d5fcf 73b7a9efb377a7ccb8586b58546d26770c862dbd 9794d870cad556c721d2a272d8edc39e0e4ee3ed 9fdd3f552c4175b895cfcfc964d9f4ea2b37ea7b b876ce1b4e60a15848f9551c18d1636bdfc741ee c349e7b39f7744fb6bb7f9bb95b3d4ecb293d039 c470d3f1a96d7642a27fa059e220f03a950cf972 c49b365ff40efffe8a717b395ef19692916401c5 c783a1911e53edd098fa61299b856b83d6681398 d2cb7b64897c2578d9d841a59aad87133fe2acbf dabdeb6ea0128362314ea5b96eef750b7acdfd4c e15c7441b9a1a7fcf6d3b0bed8c478ec7beb5e20 ecd622f5db659b51fdc6d8bbca43e14ff0e6a622 eef754fbbba0411618d82fbec96342a52add6fcc f65365e9d6ac4ca07342e5c28ea1d6380faabaa1 fd9a50b7338b149a4bfb4389408f2e059f56d9ef Package: libstrongswan-extra-plugins Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1260 Depends: osmocom-nightly (= 202602051800), libstrongswan (= 2:0.1.2.osmo.epdg.202602051800), libc6 (>= 2.34), libcurl4t64 (>= 7.16.2), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.14), libldap2 (>= 2.6.2), libtss2-sys1t64 (>= 3.0.1) Breaks: libcharon-extra-plugins (<= 5.5.3-1) Replaces: libcharon-extra-plugins (<= 5.5.3-1) Filename: ./armhf/libstrongswan-extra-plugins_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 240248 MD5sum: 1551de9670abf8b1fce0ad5da95ca912 SHA1: 2a7364b202b2938581e582b37148bc66e6011f3b SHA256: 3fa6c09f5c72d673bc44e706ac3b566759dee6061d240c80e1f04b5774e9cb42 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan utility and crypto library (extra plugins) The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides extra plugins for the strongSwan utility and cryptographic library. . Included plugins are: - af-alg [linux] (AF_ALG Linux crypto API interface, provides ciphers/hashers/hmac/xcbc) - ccm (CCM cipher mode wrapper) - cmac (CMAC cipher mode wrapper) - ctr (CTR cipher mode wrapper) - curl (libcurl based HTTP/FTP fetcher) - curve25519 (support for Diffie-Hellman group 31 using Curve25519 and support for the Ed25519 digital signature algorithm for IKEv2) - gcrypt (Crypto backend based on libgcrypt, provides RSA/DH/ciphers/hashers/rng) - ldap (LDAP fetching plugin based on libldap) - padlock (VIA padlock crypto backend, provides AES128/SHA1) - pkcs11 (PKCS#11 smartcard backend) - rdrand (High quality / high performance random source using the Intel rdrand instruction found on Ivy Bridge processors) - test-vectors (Set of test vectors for various algorithms) . Also included is the libtpmtss library adding support for TPM plugin (https://wiki.strongswan.org/projects/strongswan/wiki/TpmPlugin) Package: libstrongswan-extra-plugins-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 640 Depends: libstrongswan-extra-plugins (= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/libstrongswan-extra-plugins-dbgsym_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 525540 MD5sum: 9aff036ccda42ad4766d5b06881fc72b SHA1: 6a035cb72ec75d685242c9414fb9b92295947fda SHA256: 6d54837a2b705055781f658ab1a022c9eee8e93c4dc18fac12633121062a2f67 Section: debug Priority: optional Description: debug symbols for libstrongswan-extra-plugins Build-Ids: 47d5be67628880065a14c8f480c07e088a539669 76136b5ad819b0ff2bced592d54844b8ee371ae2 78adb4c8e65d6372d25dc2cdb76a9e468d22ea30 8f9def1cd80c3321e16d87a686cc7db7a119b6b2 90865d32cb2eb3b949f4854204cc54b75e88e721 a01a6f3a59dd67c3e88114a56f7615bd4d1afc32 adceb4cfdaa4f53a91896ebf2684eda82d1d5031 ae165493d9be40f7c30d65415d04743355b8f024 c1ab72e4987467d85eb6fd92e5d7049fa6e67b6b cadf6eef63fe7829eeb96829ffdc9f48a4178970 d1c906967c1821270e7337ac80d89e5488b7486e dd34029d97c70e0d3288e97102993eed9a0b2cd6 e2d381917e5dbeb31ff31b55a198c43011690589 e63a9aa3233635bcc9b9dd8512fbf229d43d3316 Package: libstrongswan-standard-plugins Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 491 Depends: osmocom-nightly (= 202602051800), libstrongswan (= 2:0.1.2.osmo.epdg.202602051800), libc6 (>= 2.34), libip4tc2 (>= 1.8.3), libssl3t64 (>= 3.0.0) Filename: ./armhf/libstrongswan-standard-plugins_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 107696 MD5sum: 1dab4e49b1569a8b48cd1338f985dc31 SHA1: 7de818b8ca9b7b439249286b2a1abfa7bf400beb SHA256: 7ac8cb21ba1dc49542ad705f41f4d613f0e220aa585aa672b703c57077c3a1d8 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan utility and crypto library (standard plugins) The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides some common plugins for the strongSwan utility and cryptograhic library. . Included plugins are: - agent (RSA/ECDSA private key backend connecting to SSH-Agent) - gcm (GCM cipher mode wrapper) - openssl (Crypto backend based on OpenSSL, provides RSA/ECDSA/DH/ECDH/ciphers/hashers/HMAC/X.509/CRL/RNG) Package: libstrongswan-standard-plugins-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 297 Depends: libstrongswan-standard-plugins (= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/libstrongswan-standard-plugins-dbgsym_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 250460 MD5sum: 63c6def31138e462137e1691a2a49034 SHA1: 5e4b8daa790d03f3fdd86b850bc5b13b18edacb3 SHA256: 9f8dff2c78ccce3303b7b6e02b3245e4ff677043bc2aae1db00957e71eb9a983 Section: debug Priority: optional Description: debug symbols for libstrongswan-standard-plugins Build-Ids: 45a2e4f6b5901bc2195a38d1b95bb68105b19126 7c8f9d866c48bb2114d473850e646abca538dd15 7ea010ba6f7d0a3acc5e1d72264cfd08ebef6b73 d57d6f9dabf4e9f31d53744e80f01614d2ce775e Package: libusrp-dev Source: libusrp Version: 3.4.11.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 162 Depends: osmocom-nightly (= 202602051800), libusrp1 (= 3.4.11.202602051800), libusb-1.0-0-dev Filename: ./armhf/libusrp-dev_3.4.11.202602051800_armhf.deb Size: 25640 MD5sum: f827e61312d6d138f6910f7b0be67213 SHA1: b6b066b4df1326d8fdc39d94b8bbc2178711b5d7 SHA256: 532b34c3e154b871fc391898891147a6fcff7e51bf22e34b806473bb7113fb1f Section: libdevel Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: gnuradio based driver library for the USRP1 SDR - dev files Package: libusrp-doc Source: libusrp Version: 3.4.11.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 327 Depends: osmocom-nightly (= 202602051800), libusrp1 (= 3.4.11.202602051800), libjs-jquery Filename: ./all/libusrp-doc_3.4.11.202602051800_all.deb Size: 81776 MD5sum: 45ea4bf26497087f205c7743c0a352a2 SHA1: fcdd2e45effe79113c3d8ad416fb0e0238fd8225 SHA256: 056c52d8df8cf633c528374c1192337e508f36c4f54ab0d11f58404dea3dff57 Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: Documentation for gnuradio based driver library for the USRP1 SDR Package: libusrp-firmware Source: libusrp Version: 3.4.11.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1799 Depends: osmocom-nightly (= 202602051800), libusrp1 (= 3.4.11.202602051800) Filename: ./armhf/libusrp-firmware_3.4.11.202602051800_armhf.deb Size: 741296 MD5sum: af1db663bc4e6a9959552b160e8cd1da SHA1: 8de596cf7ce3b43119369701762b6f10ac399c4e SHA256: b84c94a90e7f85ce6a534231cb57884030e9c463b68801d393f942bf69f0a3ba Section: libs Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: gnuradio based driver library for the USRP1 SDR - firmware files Package: libusrp-utils Source: libusrp Version: 3.4.11.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 143 Depends: osmocom-nightly (= 202602051800), libusrp1 (= 3.4.11.202602051800) Filename: ./armhf/libusrp-utils_3.4.11.202602051800_armhf.deb Size: 10924 MD5sum: 7bac1b744616e352eb83085f0bbc17f1 SHA1: 2a1c7f1258ce1533ebdf7d556cb15e24120555a2 SHA256: 3e9d22ce5a45e694273b66ab0ce5e41c1999b6dd4ad7eec1d72e247b1779cf8c Section: libs Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: gnuradio based driver library for the USRP1 SDR - several tools Package: libusrp-utils-dbgsym Source: libusrp Version: 3.4.11.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 104 Depends: libusrp-utils (= 3.4.11.202602051800) Filename: ./armhf/libusrp-utils-dbgsym_3.4.11.202602051800_armhf.deb Size: 66304 MD5sum: fab89cb9fd3af057525d4c34281e8f4c SHA1: fecc6cae2008efb3f5daae08a073a6a4dab4864d SHA256: b33a51a79793a13859569051ded5bf26d47b27b9ce9bc2380b2e97cd4de90a31 Section: debug Priority: optional Description: debug symbols for libusrp-utils Build-Ids: 72802a1c267bdf8df3b7abed70c0a7dcf257b677 b1855ebd4e2cc4c1054ba700e13827e2d518a350 Package: libusrp1 Source: libusrp Version: 3.4.11.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 465 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.38), libgcc-s1 (>= 3.5), libstdc++6 (>= 11), libusb-1.0-0 (>= 2:1.0.8) Filename: ./armhf/libusrp1_3.4.11.202602051800_armhf.deb Size: 101740 MD5sum: 08fe805c36b61edfac13dfc840efcd47 SHA1: 032fb9c6aa5836a3cf0fc3367690bdef0355e31f SHA256: d7cb1abf8d3d266a3144500446c47f8ac1c8bf6f850aed356d178b2a948e3e86 Section: libs Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: gnuradio based driver library for the USRP1 SDR Gnuradio removed libusrp as it switched to UHD support, including USRP1 devices. However, USRP1 on UHD doesn't support timestamps, so this library remains needed for applications that use timestamps such as osmo-trx. To find out how this library was forked from gnuradio, check libusrp.git commit description ec6adccbbdda1a4614089aaf52f9e1bab75494e7. Package: libusrp1-dbgsym Source: libusrp Version: 3.4.11.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 1252 Depends: libusrp1 (= 3.4.11.202602051800) Filename: ./armhf/libusrp1-dbgsym_3.4.11.202602051800_armhf.deb Size: 1125364 MD5sum: 8555614b9ff4be0ebe2cda6c21e8b37b SHA1: 64845fdf0e9709b6e17d5af243f7eb64bab9e612 SHA256: 9e57baa4251483907477e6efb0471dc2e931a534d4782e75dcd82c06c93c5faf Section: debug Priority: optional Description: debug symbols for libusrp1 Build-Ids: 072bc51502418cb632398abdaeee611c4cb5854c Package: neocon Version: 1.0.2.12.36dc.202602051800 Architecture: armhf Maintainer: Harald Welte Installed-Size: 75 Depends: libc6 (>= 2.34) Filename: ./armhf/neocon_1.0.2.12.36dc.202602051800_armhf.deb Size: 6008 MD5sum: ce5ea2f11f8fb8c5f76611c940a8ba91 SHA1: 0f1372b70943b9fd2d5dd678593234efe2c58901 SHA256: 6e26e6ff6ceaec87f3efedd371f6e3f3316ae6d1206a748fe680cf1ff6afc46e Section: net Priority: extra Multi-Arch: same Homepage: https://github.com/openmoko/neocon Description: Simple serial console utility with re-open-after-disconnect Package: neocon-dbgsym Source: neocon Version: 1.0.2.12.36dc.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Harald Welte Installed-Size: 29 Depends: neocon (= 1.0.2.12.36dc.202602051800) Filename: ./armhf/neocon-dbgsym_1.0.2.12.36dc.202602051800_armhf.deb Size: 7308 MD5sum: bfda1c5d8ac35dd130918547c9961108 SHA1: c706ef5489ae018465799f4f129a34e319f1b8c5 SHA256: a5414a1ec4ef19812c10ea142d4fd1720f05b24fb7d0653367d800031dad2f33 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for neocon Build-Ids: cb6fff58c89e08d0c70c40d69b5d32143535c04b Package: osmo-bsc Version: 1.14.0.10.44efd.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1733 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmo-mgcp-client14, libosmo-sigtran12, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-mgw Filename: ./armhf/osmo-bsc_1.14.0.10.44efd.202602051800_armhf.deb Size: 542340 MD5sum: 1c3d8440fd2c3767249b1f8c8573e50d SHA1: 38d73efd82c61b7a2a246c4f6ce144589b42fae6 SHA256: 51ea6e130f8688bb2c3a10e22f4a9f99b5d914c1e7f30d59d7cac92330c5837d Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: OsmoBSC: Osmocom's Base Station Controller for 2G circuit-switched mobile networks Package: osmo-bsc-bs11-utils Source: osmo-bsc Version: 1.14.0.10.44efd.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 8129 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmo-mgcp-client14, libosmo-sigtran12, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bsc-bs11-utils_1.14.0.10.44efd.202602051800_armhf.deb Size: 2285784 MD5sum: f497d90b8676509d6741c8ab43020ca5 SHA1: 12e64d1ddd636b08089a3b40ebe3878578b70052 SHA256: 2eb4b0f977be3853bd9775a0ca0b6c5ead907ce6593ee35b9d52fd41af222af6 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: Command line utilities for Siemens BS-11 BTS There is a tool in this package for configuring the Siemens BS-11 BTS. Additionally, it contains one tool for making use of an ISDN-card and the public telephone network as frequency standard for the E1 line. Package: osmo-bsc-dbg Source: osmo-bsc Version: 1.14.0.10.44efd.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 4899 Depends: osmocom-nightly (= 202602051800), osmo-bsc (= 1.14.0.10.44efd.202602051800) Filename: ./armhf/osmo-bsc-dbg_1.14.0.10.44efd.202602051800_armhf.deb Size: 3263780 MD5sum: 26827402968443e9ea0ac0026bd7668d SHA1: 6f49d81447b0ad3aa0f121da13df7881013c0555 SHA256: 7cee6a8e6984c55c516b5187db0fb310c6c41c8af4b772dc98e3c13b11c199bf Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: OsmoBSC: Osmocom's Base Station Controller for 2G circuit-switched mobile networks Build-Ids: b3c53e07d2c0c6cf62373379b765cda086990833 Package: osmo-bsc-doc Source: osmo-bsc Version: 1.14.0.10.44efd.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 2398 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-bsc-doc_1.14.0.10.44efd.202602051800_all.deb Size: 2256460 MD5sum: a241f5e143e82671b76a2063ab7b9dd7 SHA1: efd6361fd8db67ad3746deef0f5b7bde5ec32775 SHA256: 26955589f3385f2ae0e1d6d02d8473aeacf1979f7d4710e5d26419f233e5a9ee Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-bsc-ipaccess-utils Source: osmo-bsc Version: 1.14.0.10.44efd.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 15984 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmo-mgcp-client14, libosmo-sigtran12, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bsc-ipaccess-utils_1.14.0.10.44efd.202602051800_armhf.deb Size: 3396276 MD5sum: 8dc2e6374f8df59c0b55c608c8497f02 SHA1: aa4214c6eb78200900128e0008193cfa2455a825 SHA256: ecde1f545b96f9079f9214d35d74b4d53e4bcf72cf36089df9866373d225701f Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: Command line utilities for ip.access nanoBTS This package contains utilities that are specific for nanoBTS when being used together with OpenBSC. It contains mainly two tools: ipaccess-config and ipaccess-proxy. Package: osmo-bsc-meas-utils Source: osmo-bsc Version: 1.14.0.10.44efd.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 8017 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libcdk5t64 (>= 5.0.20190303), libncurses6 (>= 6), libosmo-mgcp-client14, libosmo-sigtran12, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213), libtinfo6 (>= 6) Filename: ./armhf/osmo-bsc-meas-utils_1.14.0.10.44efd.202602051800_armhf.deb Size: 2261364 MD5sum: e974f5df7777e603b7cc8eb5aa0cb22a SHA1: 5927f79460ce87be09e6bbf8f85fa7a1a4cc48c3 SHA256: 871fc3e5d303b7f180702618cf856cdca69f467cb717c94c7798dcee6cadc6f1 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: Command line utilities to manage measurement reports. Package: osmo-bsc-nat Version: 0.1.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 90 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmo-mgcp-client14, libosmo-sigtran12, libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bsc-nat_0.1.0.202602051800_armhf.deb Size: 18904 MD5sum: 8cd6883d63831c9d5291f30b721f5bb0 SHA1: e8e60244404c63c82239bf9ee0cbc0010b8f9c2b SHA256: c53a7f691437da971b7a6d58cfcb0960dd558e09c4cf37a9c17eb13d22eb8ba5 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc-nat Description: OsmoBSCNAT masquerades multiple BSCs behind one Package: osmo-bsc-nat-dbg Source: osmo-bsc-nat Version: 0.1.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 147 Depends: osmocom-nightly (= 202602051800), osmo-bsc-nat (= 0.1.0.202602051800) Filename: ./armhf/osmo-bsc-nat-dbg_0.1.0.202602051800_armhf.deb Size: 86300 MD5sum: 61283ba3e490ceb9fbc1cc15598dc0d3 SHA1: e3a4e766087d513154164a824a49c867e5018d44 SHA256: 1c8e69ca22d0078d732046e7b545673a8ff04d3777dac26b391fb3cac814430e Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-bsc-nat Description: OsmoBSCNAT masquerades multiple BSCs behind one Build-Ids: df54f714800f03581beb30863626f1b20a556f9a Package: osmo-bsc-nat-doc Source: osmo-bsc-nat Version: 0.1.0.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 8 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-bsc-nat-doc_0.1.0.202602051800_all.deb Size: 1912 MD5sum: 292578d3ad82776bab69cda61753f281 SHA1: 59592668804b5a4853696d6ef684cf45b02198d9 SHA256: dc2d1e8fcdfd1ca0f807d026f753e3c7b1f6847887d327831f18f1da811572ab Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-bsc-nat Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-bts Version: 1.10.0.33.49fd.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 41 Depends: osmocom-nightly (= 202602051800), osmo-bts-trx, osmo-bts-virtual Filename: ./armhf/osmo-bts_1.10.0.33.49fd.202602051800_armhf.deb Size: 33984 MD5sum: a880c73a48ccbc94ba4807824f1dbea4 SHA1: f12523f2caf411590c3507fa16effa37a432535c SHA256: c4f948cbee99dd4e8fd6163aa5b6e4171680bac1a75893ecd8baf752aa98e30b Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmobts Description: Base Transceiver Station for GSM OsmoBTS is a software implementation of Layer2/3 of a BTS. It implements the following protocols/interfaces: LAPDm (GSM 04.06) RTP A-bis/IP in IPA multiplex OML (GSM TS 12.21) RSL (GSM TS 08.58) . OsmoBTS is modular and has support for multiple back-ends. A back-end talks to a specific L1/PHY implementation of the respective BTS hardware. Based on this architecture, it should be relatively easy to add a new back-end to support so-far unsupported GSM PHY/L1 and associated hardware. Package: osmo-bts-doc Source: osmo-bts Version: 1.10.0.33.49fd.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 1913 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-bts-doc_1.10.0.33.49fd.202602051800_all.deb Size: 1769968 MD5sum: b61a62122068d5e399e6a288a7cb0b66 SHA1: d46b5fca734f73d8eeb73e226f09fb1e828b8c0d SHA256: b928228e0cb37600b8b736a48c513b5174557e3609690b04d19d073329a424bb Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmobts Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-bts-trx Source: osmo-bts Version: 1.10.0.33.49fd.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 581 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmoabis15, libosmocodec4, libosmocoding0, libosmocore22, libosmoctrl0, libosmogsm20, libosmoisdn0, libosmonetif11, libosmotrau11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bts-trx_1.10.0.33.49fd.202602051800_armhf.deb Size: 202724 MD5sum: 44519f2a144b8600ba993389a767517e SHA1: 9e741eae64abef4677f0c2bd8038d1f79e64e6a5 SHA256: 4d214b749c8fea69615521570c966d1926a350c673db31ec38ab58b8acdd1c6b Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmobts Description: osmo-bts-trx GSM BTS with osmo-trx osmo-bts-trx to be used with the osmo-trx application Package: osmo-bts-trx-dbg Source: osmo-bts Version: 1.10.0.33.49fd.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1769 Depends: osmocom-nightly (= 202602051800), osmo-bts-trx (= 1.10.0.33.49fd.202602051800) Filename: ./armhf/osmo-bts-trx-dbg_1.10.0.33.49fd.202602051800_armhf.deb Size: 1245236 MD5sum: 68f20f9511a7be50a10093958178af91 SHA1: 15c4a60ad40a73d731db5811eaca07c1fea0c9e7 SHA256: 5f2176af239805160dbacdb4441cfff469c0edfc99aabe39ed503d2073d99998 Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmobts Description: Debug symbols for the osmo-bts-trx Make debugging possible Build-Ids: 820c20fe39986e2218b74d2acabee7997171275e Package: osmo-bts-virtual Source: osmo-bts Version: 1.10.0.33.49fd.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 905 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmoabis15, libosmocodec4, libosmocore22, libosmoctrl0, libosmogsm20, libosmoisdn0, libosmonetif11, libosmotrau11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bts-virtual_1.10.0.33.49fd.202602051800_armhf.deb Size: 200756 MD5sum: 760ff03f75e72ab299811d9d01a4e798 SHA1: c65da03a31ae04779adbe5e152d7758d50be7812 SHA256: f3e1d0fb850e01aa031ec40afb0e415b3c6b6faa3d560b636721f9c329d2dc6f Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmobts Description: Virtual Osmocom GSM BTS (no RF hardware; GSMTAP/UDP) This version of OsmoBTS doesn't use actual GSM PHY/Hardware/RF, but utilizes GSMTAP-over-UDP frames for the Um interface. This is useful in fully virtualized setups e.g. in combination with OsmocomBB virt_phy. Package: osmo-bts-virtual-dbg Source: osmo-bts Version: 1.10.0.33.49fd.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2773 Depends: osmocom-nightly (= 202602051800), osmo-bts-virtual (= 1.10.0.33.49fd.202602051800) Filename: ./armhf/osmo-bts-virtual-dbg_1.10.0.33.49fd.202602051800_armhf.deb Size: 1971484 MD5sum: 982150c3c60ca574f3bc62bca67511d7 SHA1: 31e8ffa53a0a50e9df8c0738b7819254e98aad80 SHA256: 4dc0adb464c13f842d79b77d53e71133dd8438cb86ab52581defda3d1e1608a1 Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmobts Description: Debug symbols for the osmo-bts-virtual Make debugging possible Build-Ids: b543370e6a3b30799879a7d1daec0cb88593a509 b5b794a869ed6fb317aac8e71e24287855225c52 Package: osmo-cbc Version: 0.5.2.4.2463.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 160 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libjansson4 (>= 2.14), libosmo-sbcap2, libosmocore22, libosmogsm20, libosmonetif11, libosmovty13, libsctp1 (>= 1.0.10+dfsg), libtalloc2 (>= 2.0.4~git20101213), libulfius2.7t64 (>= 2.7.0) Filename: ./armhf/osmo-cbc_0.5.2.4.2463.202602051800_armhf.deb Size: 38980 MD5sum: 1ba3957c1f4e8f1f598d2e21a0015a36 SHA1: a13978412b7cf0ef04ae7be3e3c5a3827d522888 SHA256: 338aa610a9d27b45d21e7344ffc519724f0de0a6f7364992e4481c72278c654c Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: OsmoCBC: Osmocom's Cell Broadcast Center Package: osmo-cbc-dbg Source: osmo-cbc Version: 0.5.2.4.2463.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 328 Depends: osmocom-nightly (= 202602051800), osmo-cbc (= 0.5.2.4.2463.202602051800) Filename: ./armhf/osmo-cbc-dbg_0.5.2.4.2463.202602051800_armhf.deb Size: 216556 MD5sum: 400d9efec1a07269f1e404698a9fcb89 SHA1: c1a21f7c47348eae181acb1a4551b80a709108f6 SHA256: d5b31bc0048004074024276384fb1e045a666fb2b83bceaae2557fc2466b9df3 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: OsmoCBC: Osmocom's Cell Broadcast Center Build-Ids: 2f7590ddfafe5dd4961e3598f7940efed611223e Package: osmo-cbc-doc Source: osmo-cbc Version: 0.5.2.4.2463.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 650 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-cbc-doc_0.5.2.4.2463.202602051800_all.deb Size: 627192 MD5sum: 536943bddc9e96bca20e3335c54e7326 SHA1: 47ad882822fcc09d3640afcb87a6235a72c9a437 SHA256: 10a108708f04c1e50dba0970ca4dc8301b1a2aaf348d79774776774d5f1d3631 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-cbc-utils Source: osmo-cbc Version: 0.5.2.4.2463.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 18 Depends: osmocom-nightly (= 202602051800), python3 Filename: ./armhf/osmo-cbc-utils_0.5.2.4.2463.202602051800_armhf.deb Size: 7028 MD5sum: e08d349c7ae2b930a593c3599670bf22 SHA1: 74542beffc4994bdf52ce0bc8b0e2e37a7108cff SHA256: bb1a2873dc73ea5744b7d50c0aa45ec0fdcfcda8b987ca60d9e1c2713df7d9c7 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: Utilities for OsmoCBC: Osmocom's Cell Broadcast Center Package: osmo-e1d Version: 0.7.2.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 93 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.38), libosmo-e1d3, libosmo-octoi3, libosmocore22, libosmousb0, libosmovty13, libtalloc2 (>= 2.0.4~git20101213), libusb-1.0-0 (>= 2:1.0.16) Filename: ./armhf/osmo-e1d_0.7.2.202602051800_armhf.deb Size: 30748 MD5sum: 96ecb60a7650cc3853e9fe06bc321f97 SHA1: 19d4fc499e253473b36b18f587f38c0ce6187991 SHA256: ed9cae84b4497e1db896a56705114f037cbb18408df30d7f5c50de17e8b24717 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: osmo-e1d: Osmocom's E1 interface daemon Package: osmo-e1d-dbgsym Source: osmo-e1d Version: 0.7.2.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 168 Depends: osmo-e1d (= 0.7.2.202602051800) Filename: ./armhf/osmo-e1d-dbgsym_0.7.2.202602051800_armhf.deb Size: 96280 MD5sum: 40143e9b323e3605b7b653d708aae3c8 SHA1: 7d00930e6388d969489660b9fbb8b67bc7fe127f SHA256: e7beaa48475ea06db4cae944ea8f418796b2da5a410d6d170a22f860e949ff57 Section: debug Priority: optional Description: debug symbols for osmo-e1d Build-Ids: 9dd3fa73a4ece73370a21c3d43c49eb3e77b168b Package: osmo-fl2k Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 283 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmo-fl2k0 Filename: ./armhf/osmo-fl2k_0.2.1.202602051800_armhf.deb Size: 18028 MD5sum: 1b2b7030e281f1be2e38fd56c1801d12 SHA1: 914d4800086628660decd11362c51f0a386e2a94 SHA256: 32c6be903027e033caf110e415d16d9b4bbc9db9b0ed9df778386a4ddafc520a Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-fl2k Description: use a VGA USB adapter as DAC and SDR transmitter This software allows one to use USB 3.0 to VGA adapters based on the Fresco Logic FL2000 chip as general purpose DACs and SDR transmitter generating a continuous stream of samples by avoiding the HSYNC and VSYNC blanking intervals. Package: osmo-fl2k-dbgsym Source: osmo-fl2k Version: 0.2.1.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 101 Depends: osmo-fl2k (= 0.2.1.202602051800) Filename: ./armhf/osmo-fl2k-dbgsym_0.2.1.202602051800_armhf.deb Size: 42216 MD5sum: 674bd100380a229d28f001c73d979024 SHA1: 6a822e19b6de0c4359e6ef772cb4dcb6750b2617 SHA256: 80b07251982b70647b15872517e24d5796a4dd960295bd1d0702858e8fe8a150 Section: debug Priority: optional Description: debug symbols for osmo-fl2k Build-Ids: 38055c300e1241bf42344b5888e90cbbc73f06b2 901372ad1894a04e0716a3b98e811e2df3fc8d41 b7e24df5f8cfa652d1e07189b2372538cb64cfd1 db520cd07da8530c63255a73f491327304f6a5f1 Package: osmo-gbproxy Version: 1:0.5.1.1.422ff.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 166 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmocore22, libosmoctrl0, libosmogb14, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-sgsn Filename: ./armhf/osmo-gbproxy_0.5.1.1.422ff.202602051800_armhf.deb Size: 39504 MD5sum: 74af93eb8b369c2943cd76e94d1ba820 SHA1: e601f93eb0b4a5eb3e9bc96376553db388c84283 SHA256: 3ae4709fe11b3ee563aaf59333e25e7afad121203d7a1ad5a94740e3c8d74cf6 Section: net Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-gbproxy Description: Osmocom GPRS Gb Interface Proxy The purpose of the Gb proxy is to aggregate the Gb links of multiple BSS's and present them in one Gb link to the SGSN. Package: osmo-gbproxy-dbg Source: osmo-gbproxy Version: 1:0.5.1.1.422ff.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 221 Depends: osmocom-nightly (= 202602051800), osmo-gbproxy (= 1:0.5.1.1.422ff.202602051800) Filename: ./armhf/osmo-gbproxy-dbg_0.5.1.1.422ff.202602051800_armhf.deb Size: 122264 MD5sum: 70117e858735d8c38f583efc9ecea282 SHA1: 1b3a820fefc65973e0578b6e4446e33c951e535f SHA256: c6a9d479dea6d53ce6848f1e3f363b16a97396515e8b53047667308c3797dd9b Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-gbproxy Description: Debug symbols for Osmocom GPRS Gb Interface Proxy Build-Ids: 60b82853650114b9e29ef85c1930587f7884837d Package: osmo-gbproxy-doc Source: osmo-gbproxy Version: 1:0.5.1.1.422ff.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 1038 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-gbproxy-doc_0.5.1.1.422ff.202602051800_all.deb Size: 972768 MD5sum: 803341a15b0fa7c802ffe51a1a0f4b1d SHA1: b91943fb017132a1834cd7dc6bccec75e2ea34ed SHA256: 7aa7e438e7c138e01b60ae49f1e642b20d7ef2a658523da8506e207d01070944 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-gbproxy Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-ggsn Version: 1.14.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 316 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.38), libgtp11 (>= 1.13.0), libgtpnl0, libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-ggsn_1.14.0.202602051800_armhf.deb Size: 73764 MD5sum: 77cab73146ee33a053e28bf8640a0d40 SHA1: e2c36ef19ac83c59c85971f522d9900f15e9929d SHA256: b698de8fc00c576b392253e7d6cba95cfa9c43a6b4954280c90dda1af6cc92e6 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/openggsn Description: Osmocom Gateway GPRS Support Node (GGSN) OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. Package: osmo-ggsn-dbg Source: osmo-ggsn Version: 1.14.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 471 Depends: osmocom-nightly (= 202602051800), libgtp11 (= 1.14.0.202602051800), osmo-ggsn (= 1.14.0.202602051800) Filename: ./armhf/osmo-ggsn-dbg_1.14.0.202602051800_armhf.deb Size: 281828 MD5sum: 37ec484ae2f8e97e893b3579a78bb48e SHA1: a842ff901a80fd84aa5c1cc5a066fdea9e285be1 SHA256: ee9c435f68fdc9661ee6bb553c4b5a81bd9b93c6508c29b3abf5d561e48c59ca Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: Debug symbols for OsmoGGSN OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. Build-Ids: 32fd02e6cc28000b0effa6a7df660d19a8e4a966 d71853e09be265d65e3cda01384bd575f3564c5d Package: osmo-ggsn-doc Source: osmo-ggsn Version: 1.14.0.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 836 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-ggsn-doc_1.14.0.202602051800_all.deb Size: 789880 MD5sum: 31b80fdbcf7985807bf070a64237a3c2 SHA1: 287b44ef69f56d2f2022f73911629bcdc1ff5c1e SHA256: b43d1008da1a7ada8f267fa4ab3acfb9bdedf026166fce1389791e88688dea51 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/openggsn Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-gsm-manuals-dev Version: 1.7.0.5.1842.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 870 Depends: osmocom-nightly (= 202602051800), asciidoc, asciidoc-dblatex, dblatex, docbook5-xml, graphviz, librsvg2-bin, libxml2-utils, mscgen, python3-nwdiag, xsltproc Filename: ./all/osmo-gsm-manuals-dev_1.7.0.5.1842.202602051800_all.deb Size: 443096 MD5sum: 9ea3e86e9d88ee4b59d05af4b54fe38b SHA1: b4cf4bc5db8c29e25bfca7996d472926ec5fc1c5 SHA256: 21495ae6259d578713a419c520271adf90658f003dbf3f42ce074b6458155ea7 Section: devel Priority: optional Homepage: https://git.osmocom.org/osmo-gsm-manuals/ Description: Osmocom manuals shared code All Osomocom repositories require this package to build their manuals. Package: osmo-gtphub Source: osmo-sgsn Version: 1.12.0.77.968b6.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 181 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libcares2 (>= 1.7.1), libgtp11 (>= 1.13.0), libosmo-sigtran12, libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-gtphub_1.12.0.77.968b6.202602051800_armhf.deb Size: 44644 MD5sum: 93396c8ad15c6632cfed98204ef83df1 SHA1: 01b2d8258b67e7e5981de1c368c3d2bedf70cb93 SHA256: 01908e1c90568964c79e415af2a908fa3f5a2191162fcf5ba864bf8ccd9f69c7 Section: net Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: Osmocom GTP Hub: Proxy for GTP traffic between multiple SGSNs and GGSNs Package: osmo-gtphub-dbg Source: osmo-sgsn Version: 1.12.0.77.968b6.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 243 Depends: osmocom-nightly (= 202602051800), osmo-gtphub (= 1.12.0.77.968b6.202602051800) Filename: ./armhf/osmo-gtphub-dbg_1.12.0.77.968b6.202602051800_armhf.deb Size: 146784 MD5sum: e532b580380f499f7a363610812854bc SHA1: 77d37f16736ee12fefa643ae91e34ce662eb8e0e SHA256: 4825a6ee3ad57a10a0174b0ba09da2ef305e04e196c5b280ac8c078806930850 Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: Debug symbols for Osmocom GTP Hub Build-Ids: 64ceb73962c227f4e05bed8a58f35a85d7aea284 Package: osmo-hlr Version: 1.9.2.2.459a.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 368 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmo-gsup-client0, libosmo-mslookup1, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libsqlite3-0 (>= 3.10.0), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-hlr_1.9.2.2.459a.202602051800_armhf.deb Size: 87756 MD5sum: 0215c9fbe7af71697a6624e4dd6166b9 SHA1: e942d8cb5ea20f7dba1e9d7b4abff352f59b6551 SHA256: 4cd7dec3ef1f866f8a760ccc8531f7aff17148430ee2136dd83c5f72a4d02d29 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Osmocom Home Location Register OsmoHLR is a Osmocom implementation of HLR (Home Location Registrar) which works over GSUP protocol. The subscribers are store in sqlite DB. It supports both 2G and 3G authentication. Package: osmo-hlr-dbg Source: osmo-hlr Version: 1.9.2.2.459a.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 814 Depends: osmocom-nightly (= 202602051800), osmo-hlr (= 1.9.2.2.459a.202602051800) Filename: ./armhf/osmo-hlr-dbg_1.9.2.2.459a.202602051800_armhf.deb Size: 467652 MD5sum: 9bb6c6b3aa45a9440a7a7575267077b3 SHA1: d8e98f40302aced08efc5d99f7aeae00282adf09 SHA256: a4f7488e685132ce4e35b249849e0bb1a7a2a329875ee68e2b6b8b820bc1449a Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Debug symbols for the osmo-hlr Make debugging possible Build-Ids: 1630fdda29bd36a499ade6eb1ec52c772d6c61ae 3f1ee743a73f2cfbd5807f07f7a962dc62e70c11 7a187e3548967d100c878b03bf6e0532a8cfdc67 abbd6e78c9eb5de7f40ee36303c704f5c56e0231 fe6a9ad2277daa90608773caf473c929dc2df563 Package: osmo-hlr-doc Source: osmo-hlr Version: 1.9.2.2.459a.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 1291 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-hlr-doc_1.9.2.2.459a.202602051800_all.deb Size: 1212756 MD5sum: 83fbbe7bf340ca63c0863ea8b0b82580 SHA1: 8ca415ccfe211aa0f703d59aa6c04f29a7de03f4 SHA256: b2da6c03aab166861cb2e7f16d26b5ac00591554af39c3915cc2d7fb5b48935b Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-hnbgw Version: 1.8.0.1.f9bb.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 363 Depends: osmocom-nightly (= 202602051800), libasn1c1, libc6 (>= 2.34), libnftables1 (>= 1.0.2), libosmo-hnbap0, libosmo-mgcp-client14, libosmo-pfcp4, libosmo-ranap7, libosmo-rua0, libosmo-sigtran12, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-mgw Filename: ./armhf/osmo-hnbgw_1.8.0.1.f9bb.202602051800_armhf.deb Size: 105068 MD5sum: f0057068d76a921246ec7d21d7f334b1 SHA1: 53a3767ec5d493ce7cff7a3ecc4329fea6a419a0 SHA256: 0fae65996dbfeae5d25b79e96bf9f066e8f9a25256f5d9235e39aac2dd310974 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-hnbgw Description: OsmoHNBGW: Osmocom Home Node B Gateway Package: osmo-hnbgw-dbg Source: osmo-hnbgw Version: 1.8.0.1.f9bb.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 822 Depends: osmocom-nightly (= 202602051800), osmo-hnbgw (= 1.8.0.1.f9bb.202602051800) Filename: ./armhf/osmo-hnbgw-dbg_1.8.0.1.f9bb.202602051800_armhf.deb Size: 528592 MD5sum: 94a38146f7b312b2ad14656df4cafa53 SHA1: 2ea40af4c26a72bc1cec877873350fe0898c7c65 SHA256: b5436a44c8cbb2fd128983d372f53840dccc2b679c2c1cbbfaa2254cf093819a Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hnbgw Description: OsmoHNBGW: Osmocom Home Node B Gateway Build-Ids: 9e845712fa9a3bcb21b181aab064ba911ef5c819 Package: osmo-hnbgw-doc Source: osmo-hnbgw Version: 1.8.0.1.f9bb.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 921 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-hnbgw-doc_1.8.0.1.f9bb.202602051800_all.deb Size: 877364 MD5sum: 80ba29c3c59844cdea42ce9aca02d055 SHA1: 25621e7d61eabc86d1211af40c1efb420b60bd5c SHA256: edd3ff1f0ad17cc2602fc329473cdabc285757d01882db71f39049075c0c9f8b Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-hnbgw Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-hnodeb Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 158 Depends: osmocom-nightly (= 202602051800), libasn1c1, libc6 (>= 2.34), libosmo-hnbap0, libosmo-ranap7, libosmo-rua0, libosmocore22, libosmogsm20, libosmonetif11, libosmotrau11, libosmovty13, libsctp1 (>= 1.0.10+dfsg), libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-mgw Filename: ./armhf/osmo-hnodeb_0.2.1.202602051800_armhf.deb Size: 31572 MD5sum: cae3ed932647225bdbfe02640059b795 SHA1: 369572812e9a85a376336734bb4cda32a58f641f SHA256: f89fbb73102b3f395c66b3cea54b807d60936e5057a19b57903d0deb4b24afda Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-hnodeb Description: OsmoHNodeB: Osmocom's Home NodeB for 3G mobile networks Package: osmo-hnodeb-dbg Source: osmo-hnodeb Version: 0.2.1.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 227 Depends: osmocom-nightly (= 202602051800), osmo-hnodeb (= 0.2.1.202602051800) Filename: ./armhf/osmo-hnodeb-dbg_0.2.1.202602051800_armhf.deb Size: 134824 MD5sum: ef29494e363480ca1d90982f201496ba SHA1: 7a4449da5e862c046efc55f903aa0dfba1007345 SHA256: 75ae6cf533867c95f9667cb024bed07cd447bf063632950ede2d0c1bb45a14d8 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hnodeb Description: OsmoHNodeB: Osmocom's Home NodeB for 3G mobile networks Build-Ids: 5853fb871e7b5003f2de6a215ef048500f8cf81b Package: osmo-hnodeb-doc Source: osmo-hnodeb Version: 0.2.1.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 10 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-hnodeb-doc_0.2.1.202602051800_all.deb Size: 4072 MD5sum: c3110865edbabfc3e36f7e40abc85ded SHA1: 3591c8f3c97619b7b9603b1dec7ee9cc40dbff55 SHA256: d63936288932d7d05b2d655f56d05f507fbc902ba13c15ec779e07af03b0831c Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-hnodeb Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-mgw Version: 1.15.0.1.8afba.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 239 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmoabis15, libosmocodec4, libosmocore22, libosmoctrl0, libosmogsm20, libosmoisdn0, libosmonetif11, libosmotrau11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-mgw_1.15.0.1.8afba.202602051800_armhf.deb Size: 80456 MD5sum: 72290223f2689ebe74c701ae9f376244 SHA1: c8e0ba2d2d6ee14162b710f7e64b07520d7fe75b SHA256: d9738f9724ab668ecc6a9b8bb2ec50f21cefaacd0bcab5cd3cd2dbd55744fc44 Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/projects/osmo-mgw Description: OsmoMGW: Osmocom's Media Gateway for 2G and 3G circuit-switched mobile networks Package: osmo-mgw-dbgsym Source: osmo-mgw Version: 1.15.0.1.8afba.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 482 Depends: osmo-mgw (= 1.15.0.1.8afba.202602051800) Filename: ./armhf/osmo-mgw-dbgsym_1.15.0.1.8afba.202602051800_armhf.deb Size: 284604 MD5sum: 574d8db14ba2249b71401df830409ea3 SHA1: 7acde7a0b55ee0db492d1db3e7a78faee2636fd8 SHA256: c7edea0a7c363a410b7a3cee6b9203f2eb60da39065193c7a94de78b0f1643d3 Section: debug Priority: optional Description: debug symbols for osmo-mgw Build-Ids: 029f07e88c94c3b383b9ef76844b40837c36eb53 Package: osmo-mgw-doc Source: osmo-mgw Version: 1.15.0.1.8afba.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 931 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-mgw-doc_1.15.0.1.8afba.202602051800_all.deb Size: 884264 MD5sum: d72e303919711e815ec40d1cd286031d SHA1: af7cc88e4feebffcc29ec5513fdbe5652cd88535 SHA256: 2f7a6e006e0067fed896145b8725a2670fc191914f04591d722084816d445771 Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmo-mgw Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-msc Version: 1.15.0.4.c3368.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 914 Depends: osmocom-nightly (= 202602051800), libasn1c1, libc6 (>= 2.34), libosmo-gsup-client0, libosmo-mgcp-client14, libosmo-ranap7, libosmo-sigtran12, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libsctp1 (>= 1.0.10+dfsg), libsmpp1, libsqlite3-0 (>= 3.6.23), libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-mgw Filename: ./armhf/osmo-msc_1.15.0.4.c3368.202602051800_armhf.deb Size: 275388 MD5sum: 99c22c650dc3d77f4b4f86f0482a0be3 SHA1: 6066e0e38894ea8525b7e16dc52aa05e0afaee20 SHA256: e0c2711b62b847a3e7193500af786530291947bd08e3c721e525e4902f9064cb Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/projects/osmomsc Description: OsmoMSC: Osmocom's Mobile Switching Center for 2G and 3G circuit-switched mobile networks The Mobile Switching Center (MSC) is the heart of 2G/3G circuit-switched services. It terminates the A-interface links from the Base Station Controllers (BSC) and handles the MM and CC sub-layers of the Layer 3 protocol from the phones (MS). . This Osmocom implementation of the MSC handles A interfaces via 3GPP AoIP in an ASP role. It furthermore implements IETF MGCP against an external media gateway, such as OsmoMGW. It does *not* implement MAP towards a HLR, but the much simpler Osmocom GSUP protocol, which can be translated to MAP if needed. Package: osmo-msc-dbg Source: osmo-msc Version: 1.15.0.4.c3368.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2376 Depends: osmocom-nightly (= 202602051800), osmo-msc (= 1.15.0.4.c3368.202602051800) Filename: ./armhf/osmo-msc-dbg_1.15.0.4.c3368.202602051800_armhf.deb Size: 1530288 MD5sum: a599321b429c5cc9203c94658d0f4f24 SHA1: 2385d0db9ffd4c185cfe05a2b8d465ff4af25781 SHA256: 7367b7a41f198f5c804de6bca69b23d3552c181f124ae10fe63a3ad746262192 Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/osmomsc Description: OsmoMSC: Osmocom's Mobile Switching Center for 2G and 3G circuit-switched mobile networks The Mobile Switching Center (MSC) is the heart of 2G/3G circuit-switched services. It terminates the A-interface links from the Base Station Controllers (BSC) and handles the MM and CC sub-layers of the Layer 3 protocol from the phones (MS). . This Osmocom implementation of the MSC handles A interfaces via 3GPP AoIP in an ASP role. It furthermore implements IETF MGCP against an external media gateway, such as OsmoMGW. It does *not* implement MAP towards a HLR, but the much simpler Osmocom GSUP protocol, which can be translated to MAP if needed. . This package contains the debug symbols for osmo-msc in order to generate meaningful backtraces in bug-reports. Build-Ids: bf36c1f2f2fc7930f09c5a6716850c282829fe0b Package: osmo-msc-doc Source: osmo-msc Version: 1.15.0.4.c3368.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 1657 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-msc-doc_1.15.0.4.c3368.202602051800_all.deb Size: 1555152 MD5sum: 8063336d695bbf731684cdb4fdd14247 SHA1: ffa49d3d455f433a2a95d40aab3b37dd44ee9049 SHA256: ec6c1d3968c5cb209a58c113c47119d27fc6f30ff6be7b6bb25e732e9265d615 Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmomsc Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-mslookup-utils Source: osmo-hlr Version: 1.9.2.2.459a.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 81 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmo-mslookup1 (= 1.9.2.2.459a.202602051800), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-mslookup-utils_1.9.2.2.459a.202602051800_armhf.deb Size: 18152 MD5sum: dfe7ba18b7e03c59e2347f8756e3160a SHA1: 699e5a63e656368a103369ea2f37b8f11ac087f5 SHA256: 4e1ee3c5b970d701097ec35194f041fd1b2acfbfd57e73ad286e0dcf1c0e23a6 Section: utils Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Utilities for Osmocom MS lookup This package contains a simple MS lookup client utility. Package: osmo-pcap-client Source: osmo-pcap Version: 0.8.0.2.d0b2.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 99 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libgnutls30t64 (>= 3.8.4), libosmocore22, libosmogsm20, libosmonetif11, libosmovty13, libpcap0.8t64 (>= 0.9.8), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-pcap-client_0.8.0.2.d0b2.202602051800_armhf.deb Size: 26636 MD5sum: 2746f90e437e7d01786e4fbeb68b3a20 SHA1: f1a3f40c65e2319965898387a2cc25f88496c637 SHA256: 863b15565419cdccce9d1f313e6f5d2d568872b9520844b4da0e37a0352786df Section: net Priority: extra Homepage: https://osmocom.org/projects/osmo-pcap Description: Run osmo-pcap-client locally and send traces to a different system. Package: osmo-pcap-client-dbg Source: osmo-pcap Version: 0.8.0.2.d0b2.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 168 Depends: osmocom-nightly (= 202602051800), osmo-pcap-client (= 0.8.0.2.d0b2.202602051800) Filename: ./armhf/osmo-pcap-client-dbg_0.8.0.2.d0b2.202602051800_armhf.deb Size: 95464 MD5sum: 63c8be1d4379f25b46415780b8b122b1 SHA1: c088aa46e6ce601383d8cefeab526423028e398b SHA256: ecae05693d930161a0daf093817980dce4945f645d680b9874dff017ad78d425 Section: net Priority: extra Homepage: https://osmocom.org/projects/osmo-pcap Description: Debug symbols of osmo-pcap-client-dbg Build-Ids: 1f70c71f7d761056e753665ba0c013a0e4bf631d Package: osmo-pcap-server Source: osmo-pcap Version: 0.8.0.2.d0b2.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 102 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libgnutls30t64 (>= 3.8.4), libosmocore22, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213), libzmq5 (>= 3.2.3+dfsg) Filename: ./armhf/osmo-pcap-server_0.8.0.2.d0b2.202602051800_armhf.deb Size: 31384 MD5sum: 667be9dc6733b97593e9ac4e58dcd083 SHA1: fbe32f5b90d1238e9e1f680e62f33541896d2c65 SHA256: 454063bd95531482ac18fd944f5355527d932a0f83f73a56577b8e9ff8c3b175 Section: net Priority: extra Homepage: https://osmocom.org/projects/osmo-pcap Description: Collect traces from other systems. Package: osmo-pcap-server-dbg Source: osmo-pcap Version: 0.8.0.2.d0b2.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 185 Depends: osmocom-nightly (= 202602051800), osmo-pcap-server (= 0.8.0.2.d0b2.202602051800) Filename: ./armhf/osmo-pcap-server-dbg_0.8.0.2.d0b2.202602051800_armhf.deb Size: 101172 MD5sum: b04d7038c61e3f4c2d911544415ba50c SHA1: 6b8129480db08ba07684fd7127bfa0597e9fddbb SHA256: 7c0bc6234770dda6f420d70ba539537702a5a6c1724ef40ac597fc172d1779fc Section: net Priority: extra Homepage: https://osmocom.org/projects/osmo-pcap Description: Debug symbols of osmo-pcap-server-dbg Build-Ids: 440bbd20c192dd62839cde0f24dc5983a261eb06 Package: osmo-pcu Version: 1.5.2.3.ed7090.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 635 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.38), libgcc-s1 (>= 3.5), libosmoabis15, libosmocore22, libosmogb14, libosmogsm20, libosmoisdn0, libosmotrau11, libosmovty13, libstdc++6 (>= 4.1.1), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-pcu_1.5.2.3.ed7090.202602051800_armhf.deb Size: 210832 MD5sum: 21486a794b92a56ab4a0a564bcd1a3fc SHA1: 6eada5d02d5f9b045c73ed39a5a0e48341df600c SHA256: 445ca5e86994d1d735f475d63cda241d68bb6c5f89d9571a8cd78c3a3b522105 Section: net Priority: optional Homepage: http://osmocom.org/projects/osmopcu Description: Osmocom GPRS/EDGE Packet Control Unit (PCU) The GPRS Packet Control Unit is co-located with the GSM BTS or GSM BSC in order to provide packet-switched services for 2G (2.5G, 2.75G) networks. OsmoPCU is the Osmocom implementation of this network element. It interfaces to osmo-bts via the PCU socket of OsmoBTS and via Gb (NS-over-IP) interface with the SGSN such as OsmoSGSN. Package: osmo-pcu-dbg Source: osmo-pcu Version: 1.5.2.3.ed7090.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1566 Depends: osmocom-nightly (= 202602051800), osmo-pcu (= 1.5.2.3.ed7090.202602051800) Filename: ./armhf/osmo-pcu-dbg_1.5.2.3.ed7090.202602051800_armhf.deb Size: 1030608 MD5sum: 26a948f2461f93f73903f16cba0a736c SHA1: eb053587946fac2fc0fde19eeeabad803f089c56 SHA256: 9fa716ed490d1c923d7772d4d69f4e6d5bcd7bec4584ba06d0b6a545651c786a Section: debug Priority: extra Homepage: http://osmocom.org/projects/osmopcu Description: Debug symbols for the Osmocom GPRS/EDGE Packet Control Unit (PCU) The GPRS Packet Control Unit is co-located with the GSM BTS or GSM BSC in order to provide packet-switched services for 2G (2.5G, 2.75G) networks. OsmoPCU is the Osmocom implementation of this network element. It interfaces to osmo-bts via the PCU socket of OsmoBTS and via Gb (NS-over-IP) interface with the SGSN such as OsmoSGSN. Build-Ids: fa54afd5027d93f75129b50f677b9692905b2e76 Package: osmo-pcu-doc Source: osmo-pcu Version: 1.5.2.3.ed7090.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 1093 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-pcu-doc_1.5.2.3.ed7090.202602051800_all.deb Size: 1031652 MD5sum: 3aaabed8ef053778c4d03bc8af11883d SHA1: 58963ad6291c2b1d8e6687d0712461e153daf2fc SHA256: 221f675a3fe54438a66f78a860bcb3d40965e1769cf02fbce256f613fde6edec Section: doc Priority: optional Homepage: http://osmocom.org/projects/osmopcu Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-remsim-apitool Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 18 Depends: osmocom-nightly (= 202602051800), python3, python3-requests Filename: ./armhf/osmo-remsim-apitool_1.1.2.1.90c8.202602051800_armhf.deb Size: 8940 MD5sum: 562d813ab680e7cd303b6e477284a856 SHA1: 82220d5de3f50752857331835931f32e2e9a3857 SHA256: 40c1522b34a33fc14635fe3262efa3f993d1e5868b82232219b72a4c5f7e7bf7 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - API tool for server This is a small python tool for generating API requests to remsim-server, which can be used by the system administrator to introspect and/or modify the state (mostly slotmaps). Package: osmo-remsim-bankd Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 97 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.38), libcsv3 (>= 3.0.3), libosmo-rspro2, libosmocore22, libosmogsm20, libosmonetif11, libpcsclite1 (>= 1.5.0), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-remsim-bankd_1.1.2.1.90c8.202602051800_armhf.deb Size: 30508 MD5sum: b8c6931b05bd44a9c6a3f85110f546d1 SHA1: ecf7c562a18629325f65d48c077fd066cbea0318 SHA256: 076399e50910647cb75c24b74428c8778eeb35a440d275216e387135d3f07c19 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Bank Daemon The remsim-bankd is managing a bank of SIM card readers and their respective cards. It establishes a control connection to remsim-server and receives inbound connections from remsim-clients. Package: osmo-remsim-bankd-dbgsym Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 157 Depends: osmo-remsim-bankd (= 1.1.2.1.90c8.202602051800) Filename: ./armhf/osmo-remsim-bankd-dbgsym_1.1.2.1.90c8.202602051800_armhf.deb Size: 84072 MD5sum: 061c8533ef58b91fbf93622cb05e2d93 SHA1: ecea2d05ba8164aea5a490c941578769c55563a3 SHA256: e722bd23663cc999932dba01074c5f0e83738050bbd5ec43a3921d473e98097c Section: debug Priority: optional Multi-Arch: same Description: debug symbols for osmo-remsim-bankd Build-Ids: ecbfece42e397f1e293c84e5ddaace72e01a4e42 Package: osmo-remsim-client-shell Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 80 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmo-rspro2, libosmocore22, libosmogsm20, libosmonetif11, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-remsim-client-shell_1.1.2.1.90c8.202602051800_armhf.deb Size: 21148 MD5sum: a18a2215b3dbe2a7fe9068e505bb65df SHA1: 2a25c861e7a3d3e0d2f142e404776bce80573dfc SHA256: 782219260dd12934d2892d2814c9fd69e081258f8584fc4a831c0d0efeb3f493 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Interactive Client The remsim-client-shell is for manually interacting with a remote SIM card via remsim-bankd + remsim-server. It's mostly a test/debug tool. Package: osmo-remsim-client-shell-dbgsym Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 115 Depends: osmo-remsim-client-shell (= 1.1.2.1.90c8.202602051800) Filename: ./armhf/osmo-remsim-client-shell-dbgsym_1.1.2.1.90c8.202602051800_armhf.deb Size: 64456 MD5sum: f3342d36477d292e28145c5c4b525003 SHA1: 52c7d2357e8128b267341d1fadcea17553e38fe2 SHA256: 573f447c7eecc3ee59839e8e679396d240568aa3d973ac19844b549978a5cf06 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for osmo-remsim-client-shell Build-Ids: a84db1548327e7bfd728852ea2163d7ae415655e Package: osmo-remsim-client-st2 Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 92 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmo-rspro2, libosmo-simtrace2-1, libosmocore22, libosmogsm20, libosmonetif11, libosmousb0, libtalloc2 (>= 2.0.4~git20101213), libusb-1.0-0 (>= 2:1.0.21) Breaks: osmo-remsim-client Replaces: osmo-remsim-client Filename: ./armhf/osmo-remsim-client-st2_1.1.2.1.90c8.202602051800_armhf.deb Size: 23984 MD5sum: 1fe6c754b5d043807d99c157a1a4c79c SHA1: f544542a6e80969ac58f1d9553799c10389e395b SHA256: a33fec48e1ad0ca7ce7fcf67521702e29f527256adc35f35d0f0871a6557894d Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Client for SIMtrace2 cardem firmware The remsim-client is managing a given phone/modem. It attaches to the 'cardem' firmware of a SIMtrcace2 (or compatible, such as sysmoQMOD) hardware and forwards the SIM card communication to a remsim-bankd, under the control of remsim-server. Package: osmo-remsim-client-st2-dbgsym Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 129 Depends: osmo-remsim-client-st2 (= 1.1.2.1.90c8.202602051800) Filename: ./armhf/osmo-remsim-client-st2-dbgsym_1.1.2.1.90c8.202602051800_armhf.deb Size: 73004 MD5sum: b27b87e41a646cf75d6a52157d364a19 SHA1: e63bba521eac6fe77242498f4a2e9fb202c1a819 SHA256: 7303f0dab61a6c8ed5a5b33d023bb0094ae1dc9bb0150c8af28b88905155ebf1 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for osmo-remsim-client-st2 Build-Ids: 457fa48bfe6a14fc62e81f3379ebdae0b1af1f77 Package: osmo-remsim-doc Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 280 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-remsim-doc_1.1.2.1.90c8.202602051800_all.deb Size: 270700 MD5sum: 58f9e0a54a7df6a622b8f273fa3fa508 SHA1: 9267541c755eda4de8ca2fbdcb789ce1f46cb764 SHA256: 94261e6ecb201fd88e7e26e0238857692eb27a7fa13d300d6d15920ab5a035cd Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM documentation User manual for Osmocom Remote SIM in PDF format. Package: osmo-remsim-server Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libjansson4 (>= 2.14), liborcania2.3 (>= 2.1.0), libosmo-rspro2, libosmocore22, libosmogsm20, libosmonetif11, libtalloc2 (>= 2.0.4~git20101213), libulfius2.7t64 (>= 2.7.0) Filename: ./armhf/osmo-remsim-server_1.1.2.1.90c8.202602051800_armhf.deb Size: 26448 MD5sum: 2d29062d3501d74a07918398758ee630 SHA1: bb13dda785c30a922b9e1625647e2d402f581ac3 SHA256: 6cac1883b1fd99098d8a28ff6e7f68a115284b02b1d36b933622d78174bafb1b Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Central Server The remsim-server is the central element of a osmo-remsim deployment, it maintains a list of clients + bankds connected to it, as well as the dynamic SIM card mappings between them. Package: osmo-remsim-server-dbgsym Source: osmo-remsim Version: 1.1.2.1.90c8.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 146 Depends: osmo-remsim-server (= 1.1.2.1.90c8.202602051800) Filename: ./armhf/osmo-remsim-server-dbgsym_1.1.2.1.90c8.202602051800_armhf.deb Size: 81320 MD5sum: 499ea4bbfc50fb32c7381784da9022f6 SHA1: de6c7429eb09359b4ed3bb95b843011f0c102f44 SHA256: aeb450e0e741c23e135607eb665bcfc2efcd47c61e6514448c12d25e71aad9a3 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for osmo-remsim-server Build-Ids: a64452593918a26d4e7520f68d81c43282a7ff39 Package: osmo-sgsn Version: 1.12.0.77.968b6.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 376 Depends: osmocom-nightly (= 202602051800), libasn1c1, libc6 (>= 2.34), libcares2 (>= 1.7.1), libgtp11 (>= 1.13.0), libosmo-gsup-client0, libosmo-ranap7, libosmo-sigtran12, libosmocore22, libosmoctrl0, libosmogb14, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-sgsn_1.12.0.77.968b6.202602051800_armhf.deb Size: 126000 MD5sum: 4c4b70aa8c8b183d5b7f1252062905c0 SHA1: 3c9876115a6023e25b614a59a64a06b27c8c9f48 SHA256: acc5ef8c2973b71626a9e5e2a24993818dba045f19a14543b2f6e4b7955fce22 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: OsmoSGSN: Osmocom's Serving GPRS Support Node for 2G and 3G packet-switched mobile networks Package: osmo-sgsn-dbg Source: osmo-sgsn Version: 1.12.0.77.968b6.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1028 Depends: osmocom-nightly (= 202602051800), osmo-sgsn (= 1.12.0.77.968b6.202602051800) Filename: ./armhf/osmo-sgsn-dbg_1.12.0.77.968b6.202602051800_armhf.deb Size: 675032 MD5sum: 986c9423b312ff94a30bd1b159eeaa64 SHA1: 58f7ec1f0438122dec779c033a8829fe2ca85f5e SHA256: ffbc345e1bf50ae8f8fc0483193f2cdd4959f53d5ae7ba1e3ace901313646ab7 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: OsmoSGSN: Osmocom's Serving GPRS Support Node for 2G and 3G packet-switched mobile networks Build-Ids: 081d44d55ea9fc02156d231904e8b58d08c261c4 Package: osmo-sgsn-doc Source: osmo-sgsn Version: 1.12.0.77.968b6.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 1550 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-sgsn-doc_1.12.0.77.968b6.202602051800_all.deb Size: 1443080 MD5sum: 207bdc0629b5ce14c15e38c20fa76392 SHA1: 35748c39f291708c229044c60a2f034ed148fb29 SHA256: 016836b18b7bcacafab884062ada04bf4c2a55102a9699f693785e2d41f373db Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-sip-connector Version: 1.7.2.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 93 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libglib2.0-0t64 (>= 2.12.0), libosmocore22, libosmogsm20, libosmovty13, libsofia-sip-ua-glib3t64 (>= 1.12.10), libsofia-sip-ua0t64 (>= 1.12.10), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-sip-connector_1.7.2.202602051800_armhf.deb Size: 27852 MD5sum: 19122de2fd1d8da1ae37fbf2944bbde3 SHA1: b0d3adda20dc1f6c6bef4489871edd7bb66a659e SHA256: 3eda4ff9688f57b0c7d4070d83d3025388b4d5e2b8e9ddd0a188e86c0d89f394 Section: net Priority: optional Homepage: https://osmocom.org/projects/osmo-sip-conector/wiki Description: MNCC to SIP bridge for osmo-nitb Use the osmo-nitb MNCC interface and bridge it to SIP. Package: osmo-sip-connector-dbg Source: osmo-sip-connector Version: 1.7.2.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 174 Depends: osmocom-nightly (= 202602051800), osmo-sip-connector (= 1.7.2.202602051800) Filename: ./armhf/osmo-sip-connector-dbg_1.7.2.202602051800_armhf.deb Size: 102440 MD5sum: 602c1911aaa60b7f5bd36f622da645eb SHA1: 68d3b70b6c613cce53546f3562696098cfd5de85 SHA256: 955c36c7e711b081806f6b0bcdd401fb3acf194361753ea5dfefc67dfa49ccdb Section: debug Priority: extra Homepage: https://osmocom.org/projects/osmo-sip-conector/wiki Description: Debug symbols for the osmo-sip-connector Make debugging possible Build-Ids: 62cc89731b53e2907ad105d953e11bf5b4300cd3 Package: osmo-sip-connector-doc Source: osmo-sip-connector Version: 1.7.2.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 657 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-sip-connector-doc_1.7.2.202602051800_all.deb Size: 623344 MD5sum: 242e9a114d40df692f63885fe5e84eb7 SHA1: 9cda7362d0be33fb4da4cb91614a28bcf38dab4c SHA256: 81fb216a14b57a37f9815fa20948b678dfd58ff087f752f661560d828063840e Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmo-sip-conector/wiki Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-smlc Version: 0.4.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 92 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmo-sigtran12, libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213), libdbd-sqlite3 Filename: ./armhf/osmo-smlc_0.4.0.202602051800_armhf.deb Size: 26712 MD5sum: ebf2df7a42fb0d7038f1b4f3bb2e3a7f SHA1: c7d8e22dc96c7b2361f4b72caa7138847b570b69 SHA256: 60fe12ed8fc9ca8393f25ff70694cf731c181e5322dc8a4f328be2ed36509fd5 Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/projects/osmo-smlc Description: OsmoSMLC: Osmocom's Location Services Center FIXME . This Osmocom implementation of the SMLC handles Lb interfaces via 3GPP Lb in an M3UA ASP role. Package: osmo-smlc-dbg Source: osmo-smlc Version: 0.4.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 178 Depends: osmocom-nightly (= 202602051800), osmo-smlc (= 0.4.0.202602051800) Filename: ./armhf/osmo-smlc-dbg_0.4.0.202602051800_armhf.deb Size: 104628 MD5sum: 87bf67ebfe743d643c0d060e7760e537 SHA1: 8b082fe51d8116b867292ccd70044de11956053c SHA256: 3dc938f979541259e18e90d6052027dbdabf0df730e7113048195768c604ae44 Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/osmo-smlc Description: OsmoSMLC: Osmocom's Location Services Center FIXME . This Osmocom implementation of the SMLC handles Lb interfaces via 3GPP Lb in an M3UA ASP role. . This package contains the debug symbols for osmo-smlc in order to generate meaningful backtraces in bug-reports. Build-Ids: 500a4413a64a2fb137f578e814e30f3726def054 Package: osmo-smlc-doc Source: osmo-smlc Version: 0.4.0.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 884 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-smlc-doc_0.4.0.202602051800_all.deb Size: 834980 MD5sum: 3027b873b0feca628f2c4a834a1101bc SHA1: 2d1b6aa1bb2c47d221ba96642f979560327efee2 SHA256: 8020942f3450ccda781479102383782ef48c7f246282b2f9e89d3b44e59538f7 Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmo-smlc Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-stp Source: libosmo-sigtran Version: 2.2.1.13.3b4d.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 108 Depends: osmocom-nightly (= 202602051800), libosmo-sigtran12, libc6 (>= 2.34), libosmocore22, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-stp_2.2.1.13.3b4d.202602051800_armhf.deb Size: 22400 MD5sum: 13ce78664500abd14418e4166a1e6867 SHA1: 11b88aac3b83d7982c6ff556d286dcf8203c54e7 SHA256: b98fef56ba5752cc7dbe3b86cc7322902e3428367ecfef88782be6df52a0836c Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Osmocom SIGTRAN STP (Signaling Transfer Point) This is the Osmocom (Open Source Mobile Communications) implementation of a Signaling Transfer Point (STP) for SS7/SIGTRAN telecommunication networks. At this point it is a very minimal implementation, missing lots of the functionality usually present in a STP, such as Global Title Routing, Global Title Translation. Package: osmo-stp-dbg Source: libosmo-sigtran Version: 2.2.1.13.3b4d.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 50 Depends: osmocom-nightly (= 202602051800), osmo-stp (= 2.2.1.13.3b4d.202602051800) Filename: ./armhf/osmo-stp-dbg_2.2.1.13.3b4d.202602051800_armhf.deb Size: 27228 MD5sum: bb369b404747c47629673baa4adeb116 SHA1: 94d53de66ed5280954b24525c16ad0d6cdbd950a SHA256: 17f3c4537c43f55cc4a3fa6c6998bca0e4faa8160362694de9b403f932691632 Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Debug symbols for Osmocom SIGTRAN STP (Signaling Transfer Point) This package contains debug symbols for the Osmocom SIGTRAN STP (OsmoSTP). . OsmoSTP is the Osmocom (Open Source Mobile Communications) implementation of a Signaling Transfer Point (STP) for SS7/SIGTRAN telecommunication networks. At this point it is a very minimal implementation, missing lots of the functionality usually present in a STP, such as Global Title Routing, Global Title Translation. Build-Ids: 014ab96471433e0a2efc62c1d2c1a4f597344f0f Package: osmo-stp-doc Source: libosmo-sigtran Version: 2.2.1.13.3b4d.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 847 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-stp-doc_2.2.1.13.3b4d.202602051800_all.deb Size: 803256 MD5sum: 84cedb4573ef9f4da9f77d60115ae22b SHA1: df303c6d030b41f8643f898001a5c9dc81aa34a5 SHA256: 0d9058402d6f86572927dbdfec179f4cf0b18c4495662be3b860be1fa1759a52 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-sysmon Version: 0.3.2.6.692b.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~), liboping0 (>= 1.7.0), libosmocore22, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-sysmon_0.3.2.6.692b.202602051800_armhf.deb Size: 18668 MD5sum: 1289780610d54f546417da96ffd6a539 SHA1: 494b35fe1f8232ae5347e44597d822156adb219d SHA256: 10fe9c6e9e0009d4c7347bac2cefd9cda39839b4ea10b7fcab5fab861448598f Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/ Description: Simple Osmocom System Monitor (osysmon) This application prints on screen once per second relevant information about the status of the system. Information being printed can be specified through configuration file (and VTY). . Useful to run as a login shell to provide users with some diagnose system without providing full access the system. Package: osmo-sysmon-dbg Source: osmo-sysmon Version: 0.3.2.6.692b.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 123 Depends: osmocom-nightly (= 202602051800), osmo-sysmon (= 0.3.2.6.692b.202602051800) Filename: ./armhf/osmo-sysmon-dbg_0.3.2.6.692b.202602051800_armhf.deb Size: 71072 MD5sum: e3e7be87bc9fa7bc0d5e4af73bcac60e SHA1: 928318118d0d06221f75d032805227126d791926 SHA256: acc239a7e7820c567d7b5883931f1fda7b18b4376a50b815d1c0fc38bb58f74c Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/ Description: Simple Osmocom System Monitor (osysmon) This application prints on screen once per second relevant information about the status of the system. Information being printed can be specified through configuration file (and VTY). . Useful to run as a login shell to provide users with some diagnose system without providing full access the system. . This package contains the debug symbols for osmo-sysmon in order to generate meaningful backtraces in bug-reports. Build-Ids: c7869520743be11226e0ff04622f9294b6f4b6ac Package: osmo-trx Version: 1.7.2.1.eb9e.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 22 Depends: osmocom-nightly (= 202602051800), osmo-trx-uhd Filename: ./all/osmo-trx_1.7.2.1.eb9e.202602051800_all.deb Size: 12472 MD5sum: 3e366ee8793f9730cc8172fd08db6567 SHA1: 892c2be9b4dab64d5315f2aa0b5afb614fc4e3cd SHA256: 5383ead85810e5f7c3f69bacae639d4e6065c08dc48b118787e77037ac27d24d Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: Metapackage for osmo-trx-uhd Package: osmo-trx-dbg Source: osmo-trx Version: 1.7.2.1.eb9e.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 8607 Depends: osmocom-nightly (= 202602051800), osmo-trx-uhd (= 1.7.2.1.eb9e.202602051800), osmo-trx-usrp1 (= 1.7.2.1.eb9e.202602051800), osmo-trx-lms (= 1.7.2.1.eb9e.202602051800), osmo-trx-ipc (= 1.7.2.1.eb9e.202602051800) Filename: ./armhf/osmo-trx-dbg_1.7.2.1.eb9e.202602051800_armhf.deb Size: 6964044 MD5sum: 1a00d5b6b3573fde8bacf33c773d79f3 SHA1: 6da70e64a8094e28215e635a0b278bf29d295f57 SHA256: 6448dc207b2140c955034fcbaa1229d676bab3acc02d0c314d7f366a3233a571 Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmotrx Description: Debug symbols for the osmo-trx-* Make debugging possible Build-Ids: 0094037f8ad93b78c0f63c51a01aeef34e28545b 0713c13c2588b8c25a5c23d0f02db8f843cb9f1e 187e288df6773e6e072421d56018580f1d91fc97 296ad538556c6a9608064c5dced67b3868d7002c 755c1947357b96b5b4fdc39576e60e0b6ed3b933 Package: osmo-trx-doc Source: osmo-trx Version: 1.7.2.1.eb9e.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 790 Depends: osmocom-nightly (= 202602051800) Filename: ./all/osmo-trx-doc_1.7.2.1.eb9e.202602051800_all.deb Size: 755328 MD5sum: b10b73347752695861883be924b9801f SHA1: 42a9872fce62d3ea0328cf18be1b1c86ee372dd6 SHA256: 5c1513f2c946f06af96470e50431ccd3475daa3d1624c28f7da2cf46d518d749 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-trx-ipc Source: osmo-trx Version: 1.7.2.1.eb9e.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 364 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.38), libfftw3-single3 (>= 3.3.10), libgcc-s1 (>= 4.0), libosmocore22, libosmoctrl0, libosmovty13, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-trx-ipc_1.7.2.1.eb9e.202602051800_armhf.deb Size: 125116 MD5sum: de0de63dc50a8a511a8fbaa604b2112f SHA1: 69df653f9f3c504f7bcd6b9b419c4655c471c463 SHA256: 978610deeb264ff1cb89274b182523b56946ab3d585b96c9ebf4401fcc4bcb2d Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: SDR transceiver that implements Layer 1 of a GSM BTS (generic IPC) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-trx-lms Source: osmo-trx Version: 1.7.2.1.eb9e.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 364 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.38), libfftw3-single3 (>= 3.3.10), libgcc-s1 (>= 4.0), liblimesuite23.11-1 (>= 23.11.0+dfsg), libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-trx-lms_1.7.2.1.eb9e.202602051800_armhf.deb Size: 127680 MD5sum: 847f53d74d12c4880a834b47c5bca871 SHA1: 9c8ff58a48948a6482f854ba3cc3d27b8763aa12 SHA256: 7ffc40867c2a5f21405353b68f916e30c28e50b42a2ab353a3629cde9e8fa817 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: SDR transceiver that implements Layer 1 of a GSM BTS (LimeSuite) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-trx-ms-blade Source: osmo-trx Version: 1.7.2.1.eb9e.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 282 Depends: osmocom-nightly (= 202602051800), libbladerf2 (>= 0.2024.05), libc6 (>= 2.38), libgcc-s1 (>= 4.0), libosmocodec4, libosmocoding0, libosmocore22, libosmogsm20, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-trx-ms-blade_1.7.2.1.eb9e.202602051800_armhf.deb Size: 99156 MD5sum: 8d0b4809f80c195f8b7ad7644e85ab06 SHA1: a6db049643f40cd7db19c2905ba2992c2de18b1b SHA256: f8bb002ad10dce24c0cf558698f198b896767fc66ef434d9be7e39c7ce7feece Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: MS side transceiver (bladeRF) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-trx-uhd Source: osmo-trx Version: 1.7.2.1.eb9e.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 430 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.38), libfftw3-single3 (>= 3.3.10), libgcc-s1 (>= 4.0), libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213), libuhd4.8.0 (>= 4.8.0.0+ds1) Filename: ./armhf/osmo-trx-uhd_1.7.2.1.eb9e.202602051800_armhf.deb Size: 134596 MD5sum: 92716f508fc2f2dbebf52ec8f7117ef5 SHA1: e59fdf6e85c4368796a192b5de21d29a6a305cbc SHA256: 818fc7e9812bb1ccac541d44bbd883f038194e81833b2d6470d911309d2cf73d Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: SDR transceiver that implements Layer 1 of a GSM BTS (UHD) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-trx-usrp1 Source: osmo-trx Version: 1.7.2.1.eb9e.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 705 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.38), libfftw3-single3 (>= 3.3.10), libgcc-s1 (>= 4.0), libosmocore22, libosmoctrl0, libosmovty13, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213), libusrp1 Filename: ./armhf/osmo-trx-usrp1_1.7.2.1.eb9e.202602051800_armhf.deb Size: 257696 MD5sum: 1353393807a7a88ac1d551057633195c SHA1: 631a886407df95e6401bf1fb6669520e0f92fa3b SHA256: 005021ef98c144e0f7f38da0ff9676452864051257afc6e480671ff0ba02c1e5 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: SDR transceiver that implements Layer 1 of a GSM BTS (USRP1) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-uecups Version: 0.3.0.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 83 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libjansson4 (>= 2.14), libnl-3-200 (>= 3.2.7), libnl-route-3-200 (>= 3.2.7), libosmocore22, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-uecups_0.3.0.202602051800_armhf.deb Size: 22104 MD5sum: ae29a5c18a328892c615a7e65b07fa57 SHA1: 19755a92d3f791d91c192810c6e3f1ea9ed0fb9c SHA256: 32b80dba0ca3e98117a73bcd62ac829d21153fcaa6505234b9534b3bde4ac4cc Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/projects/osmo-uecups Description: OsmoUECUPS: UE/MME/SGW side GTP user plane daemon with control plane separation Package: osmo-uecups-dbgsym Source: osmo-uecups Version: 0.3.0.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 150 Depends: osmo-uecups (= 0.3.0.202602051800) Filename: ./armhf/osmo-uecups-dbgsym_0.3.0.202602051800_armhf.deb Size: 87736 MD5sum: 9eb16e49cd6fb89fb7d23fb46f967ec5 SHA1: 86b08a531d5bfcc4b5ce193b0b294a59696beae1 SHA256: aa1458092a4da85290a0415324f21a2a37a964943d962d9c42f27c4256433dcb Section: debug Priority: optional Description: debug symbols for osmo-uecups Build-Ids: 5afeee438a22c67965843b31327b887bb0e6d769 Package: osmocom-keyring Version: 1.1.1.8.7873.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 11 Filename: ./armhf/osmocom-keyring_1.1.1.8.7873.202602051800_armhf.deb Size: 3204 MD5sum: 82e0daaa532988de24adfc68b64a6b85 SHA1: c0922cb594aa9a0192aca2c33322b066fcb49a81 SHA256: cad0ea94be96325206741ea7697d69285eb2560d63025841604b0269cbf193e4 Section: misc Priority: optional Homepage: https://osmocom.org/ Description: Pubkey for Osmocom repositories at obs.osmocom.org Package: osmocom-nightly Version: 202602051800 Architecture: armhf Maintainer: Osmocom OBS scripts Installed-Size: 7 Depends: osmocom-keyring Conflicts: osmocom-2022q1, osmocom-2022q2, osmocom-2023q1, osmocom-latest, osmocom-master, osmocom-nightly Filename: ./armhf/osmocom-nightly_202602051800_armhf.deb Size: 1192 MD5sum: 8f11490fbb400cb2f0a6acd16ca44d20 SHA1: bad4ad2da69eabf8224e2e00dbe1f7edcfcc12cc SHA256: 3b141a789819da3b3296911aab7be8efb7604cdd7d89d1ed1ad67d7f49a42de1 Section: unknown Priority: optional Description: Dummy package, conflicts with ['osmocom-2022q1', 'osmocom-2022q2', 'osmocom-2023q1', 'osmocom-latest', 'osmocom-master', 'osmocom-nightly'] Package: python3-osmopy-libs Source: osmo-python-tests Version: 0.3.0.166.5d0f.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 83 Depends: osmocom-nightly (= 202602051800), python3:any Filename: ./all/python3-osmopy-libs_0.3.0.166.5d0f.202602051800_all.deb Size: 17828 MD5sum: a06b10391a35c67da0e8fc2dafb0b621 SHA1: 67cf0bdc684b95ff981661f063426564a17ba6ca SHA256: c9c4fba240ad66be0a5bb6c2f956f17f19f1301f540871aad7db57a118b5464f Section: python Priority: optional Homepage: https://gitea.osmocom.org/cellular-infrastructure/osmo-python-tests Description: Python code (not only) for testing of Osmocom programs . This package contains the Python 3 version of osmopy libraries. Package: python3-osmopy-utils Source: osmo-python-tests Version: 0.3.0.166.5d0f.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 58 Depends: osmocom-nightly (= 202602051800), python3:any, python3-osmopy-libs, python3-aiohttp Filename: ./all/python3-osmopy-utils_0.3.0.166.5d0f.202602051800_all.deb Size: 13020 MD5sum: b8c2f783b5501bd7ad98fb223a8975d7 SHA1: 22e04fe1ccece53622b43b4500c3a1e986d2fd35 SHA256: eaa6fb7e0133ebfd78634b1ba18a70cbe5f078dd966ae418b146b0190d514e2d Section: python Priority: optional Homepage: https://gitea.osmocom.org/cellular-infrastructure/osmo-python-tests Description: Python code (not only) for testing of Osmocom programs . This package contains the Python 3 version of osmopy utils. Package: rtl-sdr Version: 2.0.2.2.ae0d.202602051800 Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 568 Depends: osmocom-nightly (= 202602051800), librtlsdr0 (= 2.0.2.2.ae0d.202602051800), libc6 (>= 2.34) Filename: ./armhf/rtl-sdr_2.0.2.2.ae0d.202602051800_armhf.deb Size: 53492 MD5sum: a99b77a9a2fe1b48335083584a0f3adc SHA1: 541f31df5ee8107358f5c9e1e8bdff9939d4acc9 SHA256: 28c7e1960a607e8b98415c9e13342989f20d94fc238967e9a4397ca2399d8532 Section: comm Priority: optional Homepage: http://sdr.osmocom.org/trac/wiki/rtl-sdr Description: Software defined radio receiver for Realtek RTL2832U (tools) rtl-sdr is a software defined radio (SDR) receiver software for certain low-cost DVB-T/DAB(+) USB dongles based on the Realtek RTL2832U chip. . This package contains a set of command line utilities: * rtl_adsb: a simple ADS-B decoder for RTL2832 based DVB-T receivers * rtl_eeprom: an EEPROM programming tool for RTL2832 based DVB-T receivers * rtl_fm: a narrow band FM demodulator for RTL2832 based DVB-T receivers * rtl_sdr: an I/Q recorder for RTL2832 based DVB-T receivers * rtl_tcp: an I/Q spectrum server for RTL2832 based DVB-T receivers * rtl_test: a benchmark tool for RTL2832 based DVB-T receivers Package: rtl-sdr-dbgsym Source: rtl-sdr Version: 2.0.2.2.ae0d.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 322 Depends: rtl-sdr (= 2.0.2.2.ae0d.202602051800) Filename: ./armhf/rtl-sdr-dbgsym_2.0.2.2.ae0d.202602051800_armhf.deb Size: 149600 MD5sum: e471bd9a611c708406119a4f05d09042 SHA1: 348f5200bb27a92ab1c718f2e700ab2300d54738 SHA256: e172996e0255e346b6c40f619ba4ab34615c0963e5a506a642645ffd76508a32 Section: debug Priority: optional Description: debug symbols for rtl-sdr Build-Ids: 345a5eab680f4d54fce735e2920822996da10faf 69ba5f326b50e079125638b8bbef7c2200e1d981 78e332915f14e51bf5d4c63e01d5adef216ccc81 810c02a1b3702fb21297b14a70a198ddbbd090b7 b02f42a3aaefa30c710f97e4b83fbcd763bbbf48 dd270d1b0c5cc95730e24caffcb9b7cd3f750fa6 e38f3024c565f4a98effc897bb263a105d2b6f28 e93099dccada378f49fad91f494b03e99a5da554 Package: sdcc Version: 4.2.0~osmocom3.113.9edd Architecture: armhf Maintainer: Osmocom team Installed-Size: 7735 Depends: sdcc-libraries (= 4.2.0~osmocom3.113.9edd), libc6 (>= 2.38), libgcc-s1 (>= 3.5), libstdc++6 (>= 13.1), zlib1g (>= 1:1.2.0) Suggests: python, sdcc-ucsim Breaks: sdcc-ucsim (<< 3.5.0) Replaces: sdcc-ucsim (<< 3.5.0) Filename: ./armhf/sdcc_4.2.0~osmocom3.113.9edd_armhf.deb Size: 1803868 MD5sum: ef603042dd4e635427c57d2f989cdfd0 SHA1: c323075655f55ca797135e397ca0968ed6065c61 SHA256: 6c045c57060653bea1a578a1708a5523a75042f198f21cfd7cc3c908ed33d604 Section: electronics Priority: optional Homepage: http://sdcc.sourceforge.net Description: Small Device C Compiler SDCC is a C compiler for the Intel MCS51 family, HC08, PIC, GameBoy Z80, DS80S390, Z80, Z180 and STM8 microcontrollers. . This package includes the compiler, assemblers and linkers. Package: sdcc-dbgsym Source: sdcc Version: 4.2.0~osmocom3.113.9edd Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 5374 Depends: sdcc (= 4.2.0~osmocom3.113.9edd) Filename: ./armhf/sdcc-dbgsym_4.2.0~osmocom3.113.9edd_armhf.deb Size: 3749100 MD5sum: 38614905014dc39dd27a1f2be74d21ee SHA1: d286ea98e796544f5adf13f6b8a8e0569bf3c15c SHA256: 8d4e1085546b4a0f8a6564b7f927fa4e6fd12628496a6de7c4414f87bfcd1dab Section: debug Priority: optional Description: debug symbols for sdcc Build-Ids: 66ba4262fbc4e93320d199a9c0aa8b39710e2794 9206e0bbb30a8e69d25d2d1cc3f23dcace4aaab0 c18d1f3d54fa56fda7c0b17981378a99ee329278 ebb4e705b294b6149689b75231adf9b8dc1ae37b Package: sdcc-libraries Source: sdcc Version: 4.2.0~osmocom3.113.9edd Architecture: all Maintainer: Osmocom team Installed-Size: 18779 Recommends: gputils Filename: ./all/sdcc-libraries_4.2.0~osmocom3.113.9edd_all.deb Size: 1583856 MD5sum: e40b506055dd82d65fd6fba4a5986821 SHA1: d854dc1a61a674d0455eddd7993acf7dcd813e6a SHA256: 4ff7da66a4eb564a91d0bc77d86c5f550843aa49ed790999989430cd8e2addae Section: electronics Priority: optional Multi-Arch: foreign Homepage: http://sdcc.sourceforge.net Description: Small Device C Compiler (libraries) SDCC is a C compiler for the Intel MCS51 family, HC08, PIC, GameBoy Z80, DS80S390, Z80, Z180 and STM8 microcontrollers. . This package contains the core library for SDCC. Package: sdcc-ucsim Source: sdcc Version: 4.2.0~osmocom3.113.9edd Architecture: armhf Maintainer: Osmocom team Installed-Size: 2942 Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.5), libstdc++6 (>= 5) Suggests: sdcc Replaces: sdcc-ucsim-snapshot Filename: ./armhf/sdcc-ucsim_4.2.0~osmocom3.113.9edd_armhf.deb Size: 764896 MD5sum: a2e466e000fae6efebb37f9072210df9 SHA1: b292e042b62ba59a76894954b7352bba1a437120 SHA256: 30fe56ad29d04a5dee98cc825f48bcc5ac93c9a8bfbe2e4a501c560746cbc7a4 Section: electronics Priority: optional Homepage: http://sdcc.sourceforge.net Description: Micro-controller simulator for SDCC uCsim is a microcontroller simulator. It is extensible to support different microcontroller families. It currently supports Intel MCS51 family, HC08 and Z80 microcontrollers. Package: simtrace2-firmware Source: simtrace2 Version: 0.9.0.1.d0ad.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 552 Recommends: dfu-util Filename: ./all/simtrace2-firmware_0.9.0.1.d0ad.202602051800_all.deb Size: 46852 MD5sum: 047b63a2f5d7d7fd6ddd073ec6c95c8b SHA1: e8c32e83bddd8c44f464a6b6a6c0c5385abaaad7 SHA256: 6af61a5805dbb4dd0bedd02af1dab17fcc93bc2801886cffe8382e37c8513842 Section: devel Priority: optional Homepage: http://osmocom.org/projects/simtrace2/wiki Description: Firmware for SAM3 based SIMtrace2 USB Devices. Open Source firmware for the Cortex-M3 microcontroller in the "Osmocom SIMtrace2" USB-attached peripheral device. Will only work in SAM3S-based SIMtrace2, not in its SAM7S-based predecessor SIMtrace! Package: simtrace2-utils Source: simtrace2 Version: 0.9.0.1.d0ad.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 277 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libosmo-simtrace2-1, libosmocore22, libosmosim2, libosmousb0, libusb-1.0-0 (>= 2:1.0.21) Recommends: simtrace2-firmware Filename: ./armhf/simtrace2-utils_0.9.0.1.d0ad.202602051800_armhf.deb Size: 19820 MD5sum: 8f056652b84bb7959fc2a0222930904f SHA1: 5bd6d3d197d3b2068d60ae2f4b2bd0432433f064 SHA256: 422a42668f366385ce9596b0c7c1e8cb13c05e51f8eceaa9af2eaca94437320e Section: devel Priority: optional Multi-Arch: same Homepage: http://osmocom.org/projects/simtrace2/wiki Description: Host utilities to communicate with SIMtrace2 USB Devices. Package: simtrace2-utils-dbgsym Source: simtrace2 Version: 0.9.0.1.d0ad.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 113 Depends: simtrace2-utils (= 0.9.0.1.d0ad.202602051800) Filename: ./armhf/simtrace2-utils-dbgsym_0.9.0.1.d0ad.202602051800_armhf.deb Size: 51396 MD5sum: 160bd0504ad36361cd2cc4f235a6355b SHA1: 2e8e5133ad7156220607c0865d3e3ba3c3078aee SHA256: 5f8112cb5b513662f3ac3fe3c9dfe5d261728538b08bc88142d7d3eeee92e314 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for simtrace2-utils Build-Ids: 08da3489f00273a7ef6915a8f11daf87bb46bb0f 0e9e92c3c8441af4c760e8e9a28e81b3bd83f684 4f1310d70666bae9b6159ece6409878b46cba41a 5df9cb39e2ac9e527a20e22248726ff63c1d052a Package: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: all Maintainer: Osmocom team Installed-Size: 142 Depends: osmocom-nightly (= 202602051800), strongswan-charon, strongswan-starter Filename: ./all/strongswan_0.1.2.osmo.epdg.202602051800_all.deb Size: 70132 MD5sum: 396b5667f1390f3daf5de1574bcc1808 SHA1: 63d016b4d4117e48ea66d4b416310b4c39fa7730 SHA256: caa062639d6634a172fcaa3aa1390de6cc2653fa22ba1c2dc958388f4cc237a2 Section: net Priority: optional Homepage: http://www.strongswan.org Description: IPsec VPN solution metapackage The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This metapackage installs the packages required to maintain IKEv1 and IKEv2 connections via ipsec.conf or ipsec.secrets. Package: strongswan-charon Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 257 Pre-Depends: debconf | debconf-2.0 Depends: osmocom-nightly (= 202602051800), iproute2 | iproute, libstrongswan (= 2:0.1.2.osmo.epdg.202602051800), strongswan-starter, libc6 (>= 2.34), strongswan-libcharon (>= 2:0.1.2.osmo.epdg.202602051800) Provides: ike-server Filename: ./armhf/strongswan-charon_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 81436 MD5sum: 459124fdba176ee0f5b23fc8478ba28a SHA1: 1767a86248cfc28beb68a9c83b1f69484c3489fa SHA256: a8b2d5168c274ef1e7b37fe8468923ce9f405ce5400a19bf81597d33e877c617 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan Internet Key Exchange daemon The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . charon is an IPsec IKEv2 daemon which can act as an initiator or a responder. It is written from scratch using a fully multi-threaded design and a modular architecture. Various plugins can provide additional functionality. Package: strongswan-charon-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 73 Depends: strongswan-charon (= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/strongswan-charon-dbgsym_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 51696 MD5sum: 4dccd5aa758eb556373de86aa8c46808 SHA1: cbb3bd4dcf8096d49d700efc708032e9d521ccae SHA256: 520951f898069edef59ff535d88c6dbe75182090131b667e5f8bdab0091e49b7 Section: debug Priority: optional Description: debug symbols for strongswan-charon Build-Ids: bcf468eed2ff23182bfcb73590eeb2b0138a27c0 Package: strongswan-libcharon Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1106 Depends: osmocom-nightly (= 202602051800), libstrongswan (= 2:0.1.2.osmo.epdg.202602051800), libc6 (>= 2.34) Recommends: libcharon-extauth-plugins Suggests: libcharon-extra-plugins Breaks: strongswan-starter (<= 5.6.1-2) Replaces: strongswan-starter (<= 5.6.1-2) Filename: ./armhf/strongswan-libcharon_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 268664 MD5sum: f8ef32de62622b6e9e670e04c60837e6 SHA1: d26591f3341c6f87b6cf9268554d0e9052c56325 SHA256: fb993059fe972cb42e6b424cf54375fa8472a9f5be4429def3d9db1d98606ef2 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan charon library The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the charon library, used by IKE client like strongswan-charon, strongswan-charon-cmd or strongswan-nm as well as standard plugins: - socket-default - counters - bypass-lan (disabled by default) . On Linux, it also contains the xfrmi binary which can be used on Linux 4.19+ to create XFRM interfaces (for more information, see https://wiki.strongswan.org/projects/strongswan/wiki/RouteBasedVPN) Package: strongswan-libcharon-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 1138 Depends: strongswan-libcharon (= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/strongswan-libcharon-dbgsym_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 1039156 MD5sum: f39451981112f2a23ded5264ba70887e SHA1: ad35a65f0987968a6d13d6759ff4c1e84ea82bb2 SHA256: 7a0204a48ca613bbfe5febc3608641036acfe96038ce281afa4728344b59ce55 Section: debug Priority: optional Description: debug symbols for strongswan-libcharon Build-Ids: 18ed9fc3cf69968349e6557ba2fc3dfb5f524648 41ecbaa21d9355c9fc22876b9fcef08a5dcd44c9 489adb68921e0e938c73a6a1b28e8f19688ff051 a6c88212208e49cd538c865aee9102ee6c6d7f07 c9822846f909f969667828e62394269d8c32158d e11b2e23bb50fb534a9684eefb1385e2b752afd8 Package: strongswan-nm Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 215 Depends: osmocom-nightly (= 202602051800), libc6 (>= 2.34), libglib2.0-0t64 (>= 2.80.0), libnm0 (>= 1.2.0), libstrongswan (>= 2:0.1.2.osmo.epdg.202602051800), strongswan-libcharon (>= 2:0.1.2.osmo.epdg.202602051800) Recommends: network-manager-strongswan Replaces: network-manager-strongswan (<= 1.4.1-1~) Filename: ./armhf/strongswan-nm_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 82088 MD5sum: d667703e5495738de7c1c9e9ae3ac372 SHA1: 46eeeef4a00fe9b9a46561c4523386b06369182e SHA256: 6298c3dea79355b8cd9b7670f74af130d3c75b67a12f1c27e45fae1983b81d1f Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan plugin to interact with NetworkManager The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This plugin provides an interface which allows NetworkManager to configure and control the IKEv2 daemon directly through D-Bus. It is designed to work in conjunction with the network-manager-strongswan package, providing a simple graphical frontend to configure IPsec based VPNs. Package: strongswan-nm-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 161 Depends: strongswan-nm (= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/strongswan-nm-dbgsym_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 119680 MD5sum: fd47b9815736b7bc7c0b8101c30dcc97 SHA1: 9df02863b849a72258061e2ccca3c8d181208b9d SHA256: 198d420cd252ffcf0e9189dc5e8012055602bf277cf33681e1ade6321a1e35f4 Section: debug Priority: optional Description: debug symbols for strongswan-nm Build-Ids: f9dd85fd0aae243ef66ca4f589c236fb4160c0a4 Package: strongswan-pki Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 244 Depends: osmocom-nightly (= 202602051800), libstrongswan (= 2:0.1.2.osmo.epdg.202602051800), libc6 (>= 2.34) Filename: ./armhf/strongswan-pki_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 111488 MD5sum: 3a78cf57c9639b86ed03cb44b552d22a SHA1: ee96ad5858334941db484a3ca940164a30819332 SHA256: 0886fe53e7d09234aad736fa488e15b871dceba64abd77466e337d940b81b7a5 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan IPsec client, pki command The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the pki tool which allows on to run a simple public key infrastructure. Package: strongswan-pki-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 165 Depends: strongswan-pki (= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/strongswan-pki-dbgsym_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 87512 MD5sum: ca980788abf61b360d7f20e829909d39 SHA1: b29f70ad23bff9ad5788fa10dbe565022eadbb80 SHA256: 4e86435b4878e6b4351980bce65a26210edc88fad12e258c0c7ddb25d275f4b6 Section: debug Priority: optional Description: debug symbols for strongswan-pki Build-Ids: f0e42d8c5ee6734406740208608541327c2aa4ae Package: strongswan-starter Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 632 Pre-Depends: init-system-helpers (>= 1.54~) Depends: osmocom-nightly (= 202602051800), adduser, libstrongswan (= 2:0.1.2.osmo.epdg.202602051800), sysvinit-utils (>= 3.05-3), debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.38) Recommends: strongswan-charon Conflicts: openswan Filename: ./armhf/strongswan-starter_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 196936 MD5sum: dc0c8e48a8ab989f5ab7be3e0e0067fe SHA1: 1512d8d89bff1229cade8165f18d163b259d58b3 SHA256: f84080f80582d0ef8c9b6e96b188f8a5cea50e40628aa14627b86f2c5f09d65f Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan daemon starter and configuration file parser The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . The starter and the associated "ipsec" script control the charon daemon from the command line. It parses ipsec.conf and loads the configurations to the daemon. Package: strongswan-starter-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 399 Depends: strongswan-starter (= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/strongswan-starter-dbgsym_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 293968 MD5sum: 41f5b2c2f57b600ddfc929d2091c77d0 SHA1: 4eb652522d7d5b4722609b7816ac3fe69c4baa9d SHA256: 7e6f5346d51852ea112742d8c4d9afec16518c9ebca6f88474ceda3ee36bf285 Section: debug Priority: optional Description: debug symbols for strongswan-starter Build-Ids: 398dec56635d80d9906f1bc52468cd67ab983ede c0decea5092b2d97cd255f845f8a5447ffc5dd37 e92d13dc74b70ed0e30f4cd04c2374c63dc736b7 Package: strongswan-swanctl Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 546 Depends: osmocom-nightly (= 202602051800), libstrongswan (= 2:0.1.2.osmo.epdg.202602051800), libc6 (>= 2.38) Breaks: strongswan-starter (<< 5.8.0-1) Replaces: strongswan-starter (<< 5.8.0-1) Filename: ./armhf/strongswan-swanctl_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 159716 MD5sum: bbf29be0a67c81d786b465f0047d91f7 SHA1: 1b2acdcfb5f40ce1d40a457b856ea58af3dd4d04 SHA256: 5fcf553983d5f3ee3020158cf69733783e5300041aa205c22d324a0b0bde6ec1 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan IPsec client, swanctl command The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the swanctl interface, used to configure a running charon daemon Package: strongswan-swanctl-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202602051800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 457 Depends: strongswan-swanctl (= 2:0.1.2.osmo.epdg.202602051800) Filename: ./armhf/strongswan-swanctl-dbgsym_0.1.2.osmo.epdg.202602051800_armhf.deb Size: 342168 MD5sum: eb41df4d2ed2b7ae0748699dc6f0e842 SHA1: 2ba86397cbb802f1628677255b35387383576d30 SHA256: 3ae9eec34dee5a46394ab16b767cfdefad6ebbbf80b81e38dded3baafa3d935d Section: debug Priority: optional Description: debug symbols for strongswan-swanctl Build-Ids: 11bddbb7791187592f5fc324498df3e573c05f2c 6c86cbfa05e3254d1cb83f19c3770b0bac57d61c 9acd2275a2101ae20511491d521c79dca624d9ca