Package: abisip-find Source: osmo-bsc Version: 1.14.0.6.37929.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 148 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/abisip-find_1.14.0.6.37929.202601231800_armhf.deb Size: 58496 MD5sum: fd6be24479e63370336fb9404b3e6f72 SHA1: 6cc57849b70d510c6d3d5bf67213b8eeab4b7101 SHA256: 48c8a212d88220bb224c199398193f7e613a5d056c37930a001208e451d1603f Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: Command line utility to find ip.access compatible BTS Package: charon-cmd Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 216 Depends: osmocom-nightly (= 202601231800), libstrongswan (= 2:0.1.2.osmo.epdg.202601231800), libc6 (>= 2.34), strongswan-libcharon (>= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/charon-cmd_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 79768 MD5sum: e44bc2041a52aca24adb29b630efa06f SHA1: fe2c6ac454d13dad5d5f1bd63c5aa61610eeb13a SHA256: ce1693ecc2b25e7298999777350a165b6ece5e1fdcd2a306c86131f06276e867 Section: net Priority: optional Homepage: http://www.strongswan.org Description: standalone IPsec client The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the charon-cmd command, which can be used as a client to connect to a remote IKE daemon. Package: charon-cmd-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 110 Depends: charon-cmd (= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/charon-cmd-dbgsym_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 82240 MD5sum: a780fa6dc2016371921a2ae4a7ed98a7 SHA1: cb5d5cb2a8092c6af02e8d67f682a5fdad510ba9 SHA256: 1d46afdd2a217e43fc3b06ffafca4e974aa4076577ca8a86fae15cfb1e79116d Section: debug Priority: optional Description: debug symbols for charon-cmd Build-Ids: 9983aa130131d9bb7bc3540dbc8953fc4da8aec5 Package: charon-systemd Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 233 Depends: osmocom-nightly (= 202601231800), libstrongswan (= 2:0.1.2.osmo.epdg.202601231800), strongswan-swanctl, libc6 (>= 2.34), libsystemd0, strongswan-libcharon (>= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/charon-systemd_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 77104 MD5sum: 1cba2ade8fcaaf05f89fb10c08c7554b SHA1: 5837e022c51d1d1d8c317069cc535263063b0914 SHA256: 646c4ea4ae81e468d31e44c323057bc4a126e33ccb52bc2304ef791cbc205c4d Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan IPsec client, systemd support The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the charon-systemd files. Package: charon-systemd-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 71 Depends: charon-systemd (= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/charon-systemd-dbgsym_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 51348 MD5sum: a3c35ae0359ecac510b92d8031a9ac00 SHA1: 98123a283715d17cc38841b5d315912d97a500ed SHA256: 83776aea7fdc2ef8a0f7c0813db77398770226c4b088882e811c91c04b84ae9d Section: debug Priority: optional Description: debug symbols for charon-systemd Build-Ids: 80c9e692803d4d4a5b7770d1c3243a9deee6b44c Package: gtp-echo-responder Source: osmo-ggsn Version: 1.14.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 108 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34) Filename: ./armhf/gtp-echo-responder_1.14.0.202601231800_armhf.deb Size: 23404 MD5sum: e860358c14f8dbe58ca0dcf7dd1e9b71 SHA1: 6ba5bfca347bfca24efc7ef063857a7ad7f19c6a SHA256: bcc8efb83235b47916093259d2c6045e798eb730bdadafd12eb7107db13621f5 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/openggsn Description: Small program answering GTP ECHO Request with GTP ECHO Response Package: gtp-echo-responder-dbg Source: osmo-ggsn Version: 1.14.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 16 Depends: osmocom-nightly (= 202601231800), gtp-echo-responder (= 1.14.0.202601231800) Filename: ./armhf/gtp-echo-responder-dbg_1.14.0.202601231800_armhf.deb Size: 8708 MD5sum: 08e323e57028c774ccafe11b7b892347 SHA1: b52321931678606c41701d3b03e54ca2f1c5ca95 SHA256: 6b07947f85576aa2db29aa01bd704d45480c31e2cc0a140ba59ca0c105ae998f Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: Debug symbols for gtp-echo-responder Small program answering GTP ECHO Request with GTP ECHO Response. Package: libasn1c-dbg Source: libasn1c Version: 0.9.38.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 300 Depends: osmocom-nightly (= 202601231800), libasn1c1 (= 0.9.38.202601231800) Conflicts: osmo-libasn1c-dbg Replaces: osmo-libasn1c-dbg Filename: ./armhf/libasn1c-dbg_0.9.38.202601231800_armhf.deb Size: 269260 MD5sum: 9adb33a08f3fdf6f0859cb5e310673b4 SHA1: cb52dc290e81852201121f7ddfbefe48ef1f2d56 SHA256: 727240dc9b388928e68da73d78ac84e22a612356f29c62bd9c04a97e9fd61379 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libasn1c Description: asn1c runtime code as shared library Build-Ids: f98f3252d11cdf2ca1735679c13f2ef281dba819 Package: libasn1c-dev Source: libasn1c Version: 0.9.38.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 406 Depends: osmocom-nightly (= 202601231800), libasn1c1 (= 0.9.38.202601231800) Conflicts: osmo-libasn1c-dev Replaces: osmo-libasn1c-dev Filename: ./armhf/libasn1c-dev_0.9.38.202601231800_armhf.deb Size: 95840 MD5sum: 4d7baa0ff9c9f18875cfbb85f4bc1e39 SHA1: 55e3d8c9c4df03538d50ddbd1f83c5a577fd9b82 SHA256: cb8de7190a0d43730f0fa19bac3c98a53d99e27c111a924b2fc391dd65eb5108 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libasn1c Description: asn1c runtime code as shared library Package: libasn1c1 Source: libasn1c Version: 0.9.38.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 213 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libtalloc2 (>= 2.0.4~git20101213) Conflicts: osmo-libasn1c1 Replaces: osmo-libasn1c1 Filename: ./armhf/libasn1c1_0.9.38.202601231800_armhf.deb Size: 63636 MD5sum: c6e4a5a44190cfcf4a1db8f0f184f971 SHA1: 8e0d5883d704cec8ef7f978b116c9b06731a4827 SHA256: 35c5de5f13403f7d19b04e178c2bdd7ab0c5ab1efd8313698de6f0088d276fb8 Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libasn1c Description: asn1c runtime code as shared library Package: libcharon-extauth-plugins Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 288 Depends: osmocom-nightly (= 202601231800), libstrongswan (= 2:0.1.2.osmo.epdg.202601231800), libc6 (>= 2.25) Breaks: libcharon-extra-plugins (<< 5.8.0-2~) Replaces: libcharon-extra-plugins (<< 5.8.0-2~) Filename: ./armhf/libcharon-extauth-plugins_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 81408 MD5sum: c5b8b0b73306d63179ce3853505100ea SHA1: a9413a7f420e39799d66e7f2725c3249a6231ddf SHA256: 02996921b85e5c9890d3fdc6f80fcfc1ed9f48cf696c3a151f732b84419622ac Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan charon library (extended authentication plugins) The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides extended authentication plugins for the charon library: - eap-mschapv2 (EAP-MSCHAPv2 protocol handler using passwords/NT hashes) Used for client side to connect to some VPN concentrators configured for Windows 7+ and modern OSX/iOS using IKEv2 (identify with public key, authenticate with MSCHAPv2). - xauth-generic (Generic XAuth backend that provides passwords from ipsec.secrets and other credential sets) Used for the client side to connect to VPN concentrators configured for Android and older OSX/iOS using IKEv1 and XAUTH (identify with public key, authenticate with XAUTH password). . These are the "not always, but still more commonly used" plugins, for further needs even more plugins can be found in the package libcharon-extra-plugins. Package: libcharon-extauth-plugins-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 123 Depends: libcharon-extauth-plugins (= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/libcharon-extauth-plugins-dbgsym_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 103008 MD5sum: d683e3578e5d6fc12eec71e5730896a9 SHA1: 92fb6bb4c2fb05b2a10bf5e1603651c15eabf713 SHA256: b6465f8c3ddca2559029debc0bc82e205d6aa2fe72f5e2a4d092f63e37b17ff6 Section: debug Priority: optional Description: debug symbols for libcharon-extauth-plugins Build-Ids: 41fd98995b773fc1866903f64dc3f288f2cfaf2f ce19d6e55c4d67a72d5a7b0e948d13188e593109 Package: libcharon-extra-plugins Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2620 Depends: osmocom-nightly (= 202601231800), libstrongswan (= 2:0.1.2.osmo.epdg.202601231800), libc6 (>= 2.34), libgmp10 (>= 2:6.3.0+dfsg), libip4tc2 (>= 1.8.3), libosmogsm20, libpam0g (>= 0.99.7.1) Filename: ./armhf/libcharon-extra-plugins_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 258776 MD5sum: e326f589034b87c84a83b7ecf0399ed0 SHA1: e37472e728e7d29f4cf694db55e48e6e28880c8b SHA256: ffc54691938c200948ad8b52e94cf22d44d39bb8843fc0515461c47e6eb510fa Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan charon library (extra plugins) The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides extra plugins for the charon library: - addrblock (Narrow traffic selectors to RFC 3779 address blocks in X.509 certificates) - certexpire (Export expiration dates of used certificates) - eap-aka (Generic EAP-AKA protocol handler using different backends) - eap-gtc (EAP-GTC protocol handler authenticating with XAuth backends) - eap-identity (EAP-Identity identity exchange algorithm, to use with other EAP protocols) - eap-md5 (EAP-MD5 protocol handler using passwords) - eap-radius (EAP server proxy plugin forwarding EAP conversations to a RADIUS server) - eap-tls (EAP-TLS protocol handler, to authenticate with certificates in EAP) - eap-tnc (EAP-TNC protocol handler, Trusted Network Connect in a TLS tunnel) - eap-ttls (EAP-TTLS protocol handler, wraps other EAP methods securely) - error-notify (Notification about errors via UNIX socket) - ha (High-Availability clustering) - kernel-libipsec (Userspace IPsec Backend with TUN devices) - led (Let Linux LED subsystem LEDs blink on IKE activity) - lookip (Virtual IP lookup facility using a UNIX socket) - tnc (Trusted Network Connect) - unity (Cisco Unity extensions for IKEv1) - xauth-eap (XAuth backend that uses EAP methods to verify passwords) - xauth-pam (XAuth backend that uses PAM modules to verify passwords) Package: libcharon-extra-plugins-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 1947 Depends: libcharon-extra-plugins (= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/libcharon-extra-plugins-dbgsym_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 1709428 MD5sum: 2588bfa4b480cb7c4e18ece9b4bd09f7 SHA1: 2e514302216737fbd236702ba05fe78c99920a14 SHA256: f9e6943d6ae0cd9936b13e01d913de151ffe580ba4dafa322c3f2d8dd1b416de Section: debug Priority: optional Description: debug symbols for libcharon-extra-plugins Build-Ids: 1db06feb3bd91b49af4d848d37a254fb42842afa 2714772c2d8c91a5dd88a15793b712ceafc3d9d5 2bfa0a92e168cef2b20e7799c730181a84f761dd 31bdc59a54d780918d8568bd94e7bee7fb6b5fdc 3f76084bcdb348af9cbb9382855f252728cd5b94 4880b3dfbb0549afe66c5e382bb3a0baa7b534bd 5b7b1675cd910449773d27d36f93ced56426bde3 627a198c02db815b01218cce87d03f2177c94325 64cba04b17dd94c382d309f16a38488a37cdaff0 6b2ad8347ab6cd9d773568d1200bbcfdf772ffdc 6b48ca271f94aac0ed75fcfca56aca15c4ee76b6 6e13b8cd1858691e81dd47b97c557be35a0f34b3 71a9eb1f835accdd7f93d17681c0cc66e740e9c7 753b758ff1d9291a4d25399792be461b7755c3fd 7dd6c24bcc4c650b94eaf5054da5b1cbec5d48db 852b36db64c8cbf603a329772f216a5944f523a4 8555874472569082926337b3316e4be949678b47 864771590598209ff49d1430821489c2cc5d8347 946910cba2690927236d190b38eff73db0f2e1a4 984d3d42eb8ec1cbb9138761678d79e0b7c6734c a5663b73491b28d6f1182f236a54a1140a7ea5cf ad7c79dc5b71ca0f540efd749ce06505abc9cb1f bcd755ac9e52e3a64e0d0ea368efc0f6caf466d6 bf2ec569144489d6bcb53668f1e364efec6f4c07 c3ca66ad1d0f0f2eb199e2767f1da06bda22b7a5 c76b881aaff9699b0d1e2c6c9fa8a7e8184d3862 cb68666e3167904f929f63e36d7a1c97969d93c6 d9a8e57eaefdfad9c8a1faab3f1ae0be0f0f7370 e3f679ec35624684e0899832a5a9983c37906f6b e6eea040c55e678a4366d0ae03ebe6cfaaf0e6c6 ebec1480664ea359617b7db0faeb0aafc9c8e7c7 ec4760c8b0e7274c099bf031410ceff6d4db1582 ee6f41bc200ab92f46e2b415b7b667c5ce8a2b28 f59b1a1583156a842e2330f6d093b8dbc80429be fbe5f6e8c6b92c8ccd8ebea9d4f916f6ac544c76 Package: libgtp-dbg Source: osmo-ggsn Version: 1.14.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 152 Depends: osmocom-nightly (= 202601231800), libgtp11 (= 1.14.0.202601231800) Filename: ./armhf/libgtp-dbg_1.14.0.202601231800_armhf.deb Size: 133196 MD5sum: 97a41b9598ef126d665316568272fd76 SHA1: 15fa3bd3a1b0e21b16d8c216c35b2ce6d7a80252 SHA256: 92be3200e2ab446fe016bfa957903a2e699b9c478fe3a27991d8468b7209fac3 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: Debug symbols for OsmoGGSN OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. . The library libgtp implements the GTP protocol between SGSN and GGSN and this package contains the development files for this library. Build-Ids: fd682c3d738d16b2ddc065b0d2697f7a7452e39f Package: libgtp-dev Source: osmo-ggsn Version: 1.14.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 554 Depends: osmocom-nightly (= 202601231800), libgtp11 (= 1.14.0.202601231800) Filename: ./armhf/libgtp-dev_1.14.0.202601231800_armhf.deb Size: 170944 MD5sum: 972cec2aa3b207b7cd654b93ebac3410 SHA1: 4ef43e9793fbea717c1a92fca4eb4cb55f5d001b SHA256: d433af9ac429257be15864259462ba01db875af9eb255b510f82c0b708c69d67 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: Development files for libgtp OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. . The library libgtp implements the GTP protocol between SGSN and GGSN and this package contains the development files for this library. Package: libgtp11 Source: osmo-ggsn Version: 1.14.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 151 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.38), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libgtp11_1.14.0.202601231800_armhf.deb Size: 42920 MD5sum: c125bf690c35974d55b8c972e15e503f SHA1: ca372653fdf94fb5dab34108f7cee6b3bfaa98b4 SHA256: a87e07620b21c098eba9188eaa010c7cf8cd718b3a79c2cef6969417bdcaace8 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: library implementing the GTP protocol between SGSN and GGSN OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. . This library is part of OsmoGGSN and implements the GTP protocol between SGSN (Serving GPRS support node) and GGSN. Package: libgtpnl-dbg Source: libgtpnl Version: 1.3.3.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 77 Depends: osmocom-nightly (= 202601231800), libgtpnl0 (= 1.3.3.202601231800) Filename: ./armhf/libgtpnl-dbg_1.3.3.202601231800_armhf.deb Size: 41608 MD5sum: dee33fb630f4031c7e35ccc5d7ee3809 SHA1: 895f57970b111d5ff5ee67c860af8ca7607caffa SHA256: 70d1f203dd8422a7bdb130969e98059b02e950fd2973ac276b16c0f34d3bfe10 Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/linux-kernel-gtp-u/wiki/Libgtpnl Description: Debug symbols for Linux kernel GTP-U netlink library Build-Ids: 883a8a18d77dd870d6813dc16e31a66b585b0473 a03c321deec390be5cf7dfd7987887f82427c87a ac4c200c80de79040791d75aa7bc46a43409d9fd Package: libgtpnl-dev Source: libgtpnl Version: 1.3.3.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 21 Depends: osmocom-nightly (= 202601231800), libmnl-dev, libgtpnl0 (= 1.3.3.202601231800) Filename: ./armhf/libgtpnl-dev_1.3.3.202601231800_armhf.deb Size: 4472 MD5sum: 2a93cf2ecc783bd8762a4f03b45148cf SHA1: bd13bda8f720b30bebdcd29fa30ed1c205200fac SHA256: d430ea07d442e4d71f91d1a04cc13e51a46f159c709044e92e9bee453192cd33 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://osmocom.org/projects/linux-kernel-gtp-u/wiki/Libgtpnl Description: Development headers for Linux kernel GTP-U netlink library The header files provided by this package may be used to develop applications against the libgtpnl library. Package: libgtpnl-tools Source: libgtpnl Version: 1.3.3.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 141 Depends: osmocom-nightly (= 202601231800), libgtpnl0 (= 1.3.3.202601231800) Filename: ./armhf/libgtpnl-tools_1.3.3.202601231800_armhf.deb Size: 7548 MD5sum: adab80a59f8e4597b1954efaa796b745 SHA1: 3d8d7d0edfa2e769c68d06449d10a991ee74d7aa SHA256: e67cd414db0175e5f016deb55d5c68a4f6b189d2b493ebdc988c16d5301daab3 Section: net Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/linux-kernel-gtp-u/wiki/Libgtpnl Description: Tools to manage gtp interfaces and tunnels. Package: libgtpnl0 Source: libgtpnl Version: 1.3.3.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 79 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~) Filename: ./armhf/libgtpnl0_1.3.3.202601231800_armhf.deb Size: 7956 MD5sum: 8c7bf9be786a2174093983ab78068ea1 SHA1: 91ec6038222e443f4ee2bfcc5bf5a886c59638dd SHA256: 838618e9cf9979b815d4591ffca15a92b7f022002759a736d75679fdee3be91a Section: libs Priority: optional Multi-Arch: same Homepage: https://osmocom.org/projects/linux-kernel-gtp-u/wiki/Libgtpnl Description: Linux kernel GTP-U netlink library Package: libifd-osmo-remsim-client0 Source: osmo-remsim Version: 1.1.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 151 Depends: osmocom-nightly (= 202601231800), pcscd, libc6 (>= 2.34), libosmo-rspro2, libosmocore22, libosmogsm20, libosmonetif11, libtalloc2 (>= 2.0.4~git20101213) Suggests: pcsc-tools Provides: pcsc-ifd-handler Filename: ./armhf/libifd-osmo-remsim-client0_1.1.2.202601231800_armhf.deb Size: 36584 MD5sum: 67e791768ad6f4deafd68d4f4d624605 SHA1: bb48e119efeb395edf64bb0df5417548a3f7cb7f SHA256: 564fab4168d838aa6596efa474cd5efcacd8f76c9c83180dde30a86c965634c0 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM Client - PC/SC driver This is an incarnation of osmo-remsim-client which can plug as ifd_handler driver into pcscd. This means you can use remote smart cards managed by osmo-remsim-server via normal PC/SC applications. Package: libifd-osmo-remsim-client0-dbgsym Source: osmo-remsim Version: 1.1.2.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 85 Depends: libifd-osmo-remsim-client0 (= 1.1.2.202601231800) Filename: ./armhf/libifd-osmo-remsim-client0-dbgsym_1.1.2.202601231800_armhf.deb Size: 67180 MD5sum: 52903063a54b075798ea1b7f36272e45 SHA1: 6fe60b09bf69f2880c699c95aa1615775b3fc99c SHA256: 8b0c9feec849eb701286c47799d4a301798fbf4fecf841398e53f8ecbe0fc168 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libifd-osmo-remsim-client0 Build-Ids: 592a34e929a11eb955b9ff0b7a830db80d5cd130 Package: libosmo-abis Version: 2.1.0.8.c24d2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 18 Depends: osmocom-nightly (= 202601231800), libosmoabis15 (= 2.1.0.8.c24d2.202601231800), libosmotrau11 (= 2.1.0.8.c24d2.202601231800) Filename: ./armhf/libosmo-abis_2.1.0.8.c24d2.202601231800_armhf.deb Size: 10316 MD5sum: 3236c480f3e5a906c2c07106ba9851ff SHA1: 6a6f08b80f121bd09b5834cde43b4aea7b907e19 SHA256: 82f312373d963bcc4fe2f677a69c7d0d894705c1af7d8bac74afb2520c0fdc45 Section: oldlibs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: Legacy package for libosmo-abis libosmo-abis is an empty package helping in the transition to one package per DSO. Package: libosmo-abis-dbg Source: libosmo-abis Version: 2.1.0.8.c24d2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 398 Depends: osmocom-nightly (= 202601231800), libosmoabis15 (= 2.1.0.8.c24d2.202601231800), libosmotrau11 (= 2.1.0.8.c24d2.202601231800) Filename: ./armhf/libosmo-abis-dbg_2.1.0.8.c24d2.202601231800_armhf.deb Size: 359924 MD5sum: e14691677c5556cfbd3235a74ea6ff03 SHA1: 049fdb625cfb9881cd8818d8955fe96751a48d58 SHA256: ec658649a96db75373ae8bb5135a4fe9571e598b8c5a38ad1e49e9e6a56e31df Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: Debug symbols for A-bis interface The libosmo-abis library contains common/shared code regarding the A-bis interface between GSM BTS and BSC. This package in particular contains the debug symbols for the two libraries libosmoabis and libosmotrau. Build-Ids: bfd9817345954564c9758b5b5323784d0866bf9e de07c1f8b0084d390be4aaa91a5141bfc50d2956 Package: libosmo-abis-dev Source: libosmo-abis Version: 2.1.0.8.c24d2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 480 Depends: osmocom-nightly (= 202601231800), libosmotrau11 (= 2.1.0.8.c24d2.202601231800), libosmoabis15 (= 2.1.0.8.c24d2.202601231800), libosmo-netif-dev (>= 1.7.0), libosmocore-dev (>= 1.12.0) Filename: ./armhf/libosmo-abis-dev_2.1.0.8.c24d2.202601231800_armhf.deb Size: 128448 MD5sum: 0c4d14c55cae5d677d389c554f7946aa SHA1: 596fc23d062147a4e936fdff93a3ec598a09fa77 SHA256: 2c6baf92db7887deda2db39fbfe4f77e73f5b958ef513fd48e09e5c3e286431c Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: Development headers for A-bis interface The libosmo-abis library contains common/shared code regarding the A-bis interface between GSM BTS and BSC. This package in particular contains the development files needed to develop with the libosmoabis and libosmotrau libraries. Package: libosmo-asn1-tcap-dbg Source: libosmo-asn1-tcap Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 213 Depends: osmocom-nightly (= 202601231800), libosmo-asn1-tcap1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-asn1-tcap-dbg_0.2.1.202601231800_armhf.deb Size: 182484 MD5sum: f547ac741be43ddae192b35b42bc0676 SHA1: 0b67c2ab0774b774b6a27cd8561d2d90af29b7b2 SHA256: 816290545126a3421001f412b2d0c070da472cac1b9a4ebd489080e2636298a5 Section: debug Priority: extra Multi-Arch: same Homepage: https://gitea.osmocom.org/ss7-in-c/libosmo-asn1-tcap Description: Debug symbols for utility library for ASN.1 of TCAP (SS7) Build-Ids: 4e1e8042fa60d146fd54ec1acf017982c9653903 Package: libosmo-asn1-tcap-dev Source: libosmo-asn1-tcap Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 404 Depends: osmocom-nightly (= 202601231800), libosmo-asn1-tcap1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-asn1-tcap-dev_0.2.1.202601231800_armhf.deb Size: 67732 MD5sum: 2451e805f1ec04044854e0574a18063e SHA1: f9f30dd1bdb6aaa82d26a3a75718a66a3d236d1a SHA256: cf345d5c783435cd4541e86dba4afa0949908e820314a22203ed2787bd0ffdfb Section: libdevel Priority: optional Multi-Arch: same Homepage: https://gitea.osmocom.org/ss7-in-c/libosmo-asn1-tcap Description: Development headers for utility library for ASN.1 of TCAP (SS7) Package: libosmo-asn1-tcap1 Source: libosmo-asn1-tcap Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 150 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4) Filename: ./armhf/libosmo-asn1-tcap1_0.2.1.202601231800_armhf.deb Size: 29468 MD5sum: 8d9fc2ccb409d1a88ec5272e3d58705b SHA1: 72e80b15ce17bb0936ef8ac5df31a9a90063aaa5 SHA256: 5feec1e020c9cc3e96134cf68867466a0de5e9f5e57ad2d797769bb3a2f9f3a1 Section: libs Priority: optional Multi-Arch: same Homepage: https://gitea.osmocom.org/ss7-in-c/libosmo-asn1-tcap Description: Utility library for ASN.1 of TCAP (SS7) Package: libosmo-csn1-1 Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmocore22 Filename: ./armhf/libosmo-csn1-1_0.2.1.202601231800_armhf.deb Size: 25288 MD5sum: 85866e1b0110de060b97677fc82f2186 SHA1: 2b52eb8a0af3ca1ab1f6854e745f4b1a5936a274 SHA256: f42fa07287707194458b2fcd0adfc0cdf7f7e3eed91e9608a5621b21505df9a5 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom CSN.1 codec library and message definition helpers This is a shared library containing the CSN.1 (Concrete Syntax Notation 1) codec and API for message definition. The implementation is based on the original code by Vincent Helfre and Jari Sassi. Package: libosmo-csn1-1-dbgsym Source: libosmo-gprs Version: 0.2.1.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 51 Depends: libosmo-csn1-1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-csn1-1-dbgsym_0.2.1.202601231800_armhf.deb Size: 38572 MD5sum: f0a9d5b4cacd8e6418acd8327174dd7c SHA1: 939af1f122789002a359bc24bcdcd11eaa1248cc SHA256: 8f6907c01b79cfe29ee85e764eb77d61f030558c94da7e97d615496ab16b493d Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-csn1-1 Build-Ids: 0ff74ab03ebc5c48d7418022780e06f83a4b6764 Package: libosmo-csn1-dbg Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202601231800), libosmo-csn1-1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-csn1-dbg_0.2.1.202601231800_armhf.deb Size: 9724 MD5sum: 569739f30bb3f6e210b53fe809e61a09 SHA1: 5eb27dda990c7c5711009b74444124aa270c3c2b SHA256: 35c3b1fdcb5aeeabb659d73b11776c3506bc8c2ffaa35f7b4bfd65b300d3958f Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for the Osmocom CSN.1 codec library Package: libosmo-csn1-dev Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 101 Depends: osmocom-nightly (= 202601231800), libosmo-csn1-1 (= 0.2.1.202601231800), libosmocore-dev Filename: ./armhf/libosmo-csn1-dev_0.2.1.202601231800_armhf.deb Size: 30628 MD5sum: 52a73d6c758d6c4e2e10bd8825b6b162 SHA1: a2e3ebec002a7e5bdf130e923538eac74f9d8bff SHA256: fb2cb1ec664d5c78ca0da88a88c35b015f742dcdba82e8b3490e4bfabde518f3 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for the Osmocom CSN.1 codec Package: libosmo-e1d-dev Source: osmo-e1d Version: 0.7.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 54 Depends: osmocom-nightly (= 202601231800), libosmo-e1d3 (= 0.7.2.202601231800), libosmocore-dev Filename: ./armhf/libosmo-e1d-dev_0.7.2.202601231800_armhf.deb Size: 15716 MD5sum: a13f3ed85a115f5c9c19fbf593c26b9a SHA1: 72dd2d44df8e71402255bbf3265249e109505611 SHA256: 3a95b2a8aa0bfbeecd50712c9127a43e207795c112ae0e5e74253bd96bd7ec28 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: Development headers for the osmo-e1d library. Package: libosmo-e1d3 Source: osmo-e1d Version: 0.7.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 85 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-e1d3_0.7.2.202601231800_armhf.deb Size: 13380 MD5sum: c139546bb51a21d843a7b29ce941bd36 SHA1: ba501f8ed2cc163c7f2c2fa9aef9a15e4d2581bf SHA256: c26c4aee2adec63348c2daa551b3e81da78732f4d9e7c4fd4055eccb1bfe3f0d Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: Client library for talking to the Osmocom E1 interface daemon osmo-e1d. Package: libosmo-e1d3-dbgsym Source: osmo-e1d Version: 0.7.2.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 39 Depends: libosmo-e1d3 (= 0.7.2.202601231800) Filename: ./armhf/libosmo-e1d3-dbgsym_0.7.2.202601231800_armhf.deb Size: 25728 MD5sum: 0ecfc8374075b6527e0a67e7848384c9 SHA1: 0d2bab8c20c8a6526b2fa7d310a1acda73cc6458 SHA256: 9bbf05bfc335e4c2a511236ee29c915933ea75b816a1b481e0fefae1363d28ff Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-e1d3 Build-Ids: 5be0162073bb148ff4f34406b2e7a6824055433f Package: libosmo-fl2k-dev Source: osmo-fl2k Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 40 Depends: osmocom-nightly (= 202601231800), libosmo-fl2k0 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-fl2k-dev_0.2.1.202601231800_armhf.deb Size: 10696 MD5sum: be5c43772e5343c1b2af08ebd3004689 SHA1: 65bbb2e2ca422b87373681fca21e7450377861a0 SHA256: efa0b592a09a48c670530516e6952d46ec935da19ce970eee93c77a719ef3d02 Section: libdevel Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-fl2k Description: use a VGA USB adapter as DAC and SDR transmitter - development This software allows one to use USB 3.0 to VGA adapters based on the Fresco Logic FL2000 chip as general purpose DACs and SDR transmitter generating a continuous stream of samples by avoiding the HSYNC and VSYNC blanking intervals. . This package provides the development files. Package: libosmo-fl2k0 Source: osmo-fl2k Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 84 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libusb-1.0-0 (>= 2:1.0.22) Filename: ./armhf/libosmo-fl2k0_0.2.1.202601231800_armhf.deb Size: 9916 MD5sum: ed0d23fce008d645ad9166142a81317e SHA1: 05dbcde474e03c551566eb47d11513f5edbcb0d3 SHA256: 1468c86233fb589fe91afc086a474d2a1741df31d26f160a102899706c840d39 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-fl2k Description: use a VGA USB adapter as DAC and SDR transmitter - library This software allows one to use USB 3.0 to VGA adapters based on the Fresco Logic FL2000 chip as general purpose DACs and SDR transmitter generating a continuous stream of samples by avoiding the HSYNC and VSYNC blanking intervals. . This package provides the shared library. Package: libosmo-fl2k0-dbgsym Source: osmo-fl2k Version: 0.2.1.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 34 Depends: libosmo-fl2k0 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-fl2k0-dbgsym_0.2.1.202601231800_armhf.deb Size: 20344 MD5sum: 5688f3f4c532c2b920d9c8203582d429 SHA1: eb1afd6f4722d3a9b81934bb1de8e8d1b3191aca SHA256: a0b1529f1bd37911a1c99023fe959cb37f3904178efe2548e58ef9cb34bac7b2 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-fl2k0 Build-Ids: 0c3725533f83caaecfc2dbe77d3a21456f9def3b Package: libosmo-gprs-gmm-dbg Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202601231800), libosmo-gprs-gmm1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-gprs-gmm-dbg_0.2.1.202601231800_armhf.deb Size: 9712 MD5sum: 733c074876a54467580436af4ff9c270 SHA1: 16d3cf76bac70146cd47a3acf3a64a78a4d2e720 SHA256: 96ba9ef66eb641fb58ead879edf7759f24d1592e9c53659886a56c322b204a9f Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-gmm Package: libosmo-gprs-gmm-dev Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 115 Depends: osmocom-nightly (= 202601231800), libosmo-gprs-gmm1 (= 0.2.1.202601231800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-gmm-dev_0.2.1.202601231800_armhf.deb Size: 32212 MD5sum: b2cbc1d45200f75dde25c2443fda7e55 SHA1: b8ef4613c310475abc2a5e69606d4dfcf7ffef77 SHA256: cdb202e34333b3fc5f6a8a170e932db45791f18abb5e8489b874b46964fd3c85 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-gmm Package: libosmo-gprs-gmm1 Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 89 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmo-gprs-llc1, libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-gmm1_0.2.1.202601231800_armhf.deb Size: 28448 MD5sum: 37c62c0db75be27ea2b64635639b1075 SHA1: 42a827066b04a84399d11929ebcc50bc68ee49eb SHA256: bb0e772b6e367fff98f9174077dee388b7bf5f6c06b3740aa207c154448a5607 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom GMM (GPRS Mobility Management) layer for GPRS and EGPRS Package: libosmo-gprs-gmm1-dbgsym Source: libosmo-gprs Version: 0.2.1.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 105 Depends: libosmo-gprs-gmm1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-gprs-gmm1-dbgsym_0.2.1.202601231800_armhf.deb Size: 87296 MD5sum: ba63a31ace2515afa9241c8589bfc1ae SHA1: fc086c95766fca8c1b331a5dff0bba657b3090a9 SHA256: 2a5ea28b4b8de3789b1f99962818f16fb748c9d9e4df29a70a6d963e435ed871 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-gmm1 Build-Ids: d5c0927e55cfe5dcea60c5af39738856b0817326 Package: libosmo-gprs-llc-dbg Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202601231800), libosmo-gprs-llc1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-gprs-llc-dbg_0.2.1.202601231800_armhf.deb Size: 9708 MD5sum: 07a824e10733be42bb6942fbdfbceec1 SHA1: 6dcb2d7868113f5c15827c12782edb638f146dc4 SHA256: 52e3814fbf909608baaf0d86e95ba45815f62c150e56a1e5f3cd960414767f0b Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-llc Package: libosmo-gprs-llc-dev Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 109 Depends: osmocom-nightly (= 202601231800), libosmo-gprs-llc1 (= 0.2.1.202601231800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-llc-dev_0.2.1.202601231800_armhf.deb Size: 33152 MD5sum: 3e3844f893bbbe368d7ea349748a0356 SHA1: 481369efdf4a9fce16416a17447eb5ab03fa60f7 SHA256: 2682a3a15d9e6a05a0270267c21dc47b01ffcfacde1551cf20044a7bf2374d1c Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-llc Package: libosmo-gprs-llc1 Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-llc1_0.2.1.202601231800_armhf.deb Size: 29616 MD5sum: 9419b844b96e1568b505610ffe6aab14 SHA1: 8e74cef7749be0b38a7576227ffa57555796d689 SHA256: c91752e884e3cb43f49f5f6d82afb521bd7a443c8b81afc166474fb4855c6235 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom LLC (Logical Link Control) layer for GPRS and EGPRS Package: libosmo-gprs-llc1-dbgsym Source: libosmo-gprs Version: 0.2.1.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 94 Depends: libosmo-gprs-llc1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-gprs-llc1-dbgsym_0.2.1.202601231800_armhf.deb Size: 78524 MD5sum: 5cd1c543a8381084eafc61a59d86318f SHA1: 4fac65ca731baa0fdb93d1c8f843fee656a4552a SHA256: 1e64a4509e08192f7fd13ede1cdc104f9caa07980af2a9ff8e064ad7a8e90510 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-llc1 Build-Ids: 129b267d4b26e338e15915a12c5c70674378f625 Package: libosmo-gprs-rlcmac-dbg Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202601231800), libosmo-gprs-rlcmac1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-gprs-rlcmac-dbg_0.2.1.202601231800_armhf.deb Size: 9712 MD5sum: babaa7820ed136dadc809c3e19de2b8b SHA1: 1f38fc8fec90152372369005cc267e9c0b68d194 SHA256: 22a8595592dec71f59674d7d11f46ae12831ffe0f2b7ebbdc25cda40f7ded225 Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-rlcmac Package: libosmo-gprs-rlcmac-dev Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 521 Depends: osmocom-nightly (= 202601231800), libosmo-gprs-rlcmac1 (= 0.2.1.202601231800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-rlcmac-dev_0.2.1.202601231800_armhf.deb Size: 108020 MD5sum: 4d850fcb34f96d16597478b81eeb0116 SHA1: d2824f7d9c8185771a167642446f6e945c5f784a SHA256: 4a3d66cffb06f78ad70690d1785a4ca16438ececd23d98e1e9d1a9e773dbab96 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-rlcmac Package: libosmo-gprs-rlcmac1 Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 281 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmo-csn1-1, libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-rlcmac1_0.2.1.202601231800_armhf.deb Size: 76724 MD5sum: 495feb0b24ca6572eb0d2100b22924bf SHA1: dbbd905aebddf9d0be1aaf9e84c8a4a6c9952b9d SHA256: 116ab61358163943d2725e813303f4db32edcabd8b16bfb87e1ef30ef6c00cc0 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom RLC/MAC codec and message definitions for GPRS and EGPRS Package: libosmo-gprs-rlcmac1-dbgsym Source: libosmo-gprs Version: 0.2.1.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 557 Depends: libosmo-gprs-rlcmac1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-gprs-rlcmac1-dbgsym_0.2.1.202601231800_armhf.deb Size: 521620 MD5sum: 4c81481b31f7e60455d7cbcee512b876 SHA1: 0b394854b2584ea18820b3ab7b7cb01d528da123 SHA256: c9a3c463843652a2178a34a7308bfe5fb5990f27037396cddb9d9bc6ae95be04 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-rlcmac1 Build-Ids: 0716cbdc8cad05e09df79cac44abc714da6aa98a Package: libosmo-gprs-sm-dbg Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202601231800), libosmo-gprs-sm1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-gprs-sm-dbg_0.2.1.202601231800_armhf.deb Size: 9708 MD5sum: 432959a430916496b263261eaa59badd SHA1: a728a1b7952687f8be3cfc6cbe063600fceaf3c3 SHA256: 1c7da4da6321411c1f087a00ee79513fd04a1d14fc5a5600d1eafed1585773fa Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-sm Package: libosmo-gprs-sm-dev Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 85 Depends: osmocom-nightly (= 202601231800), libosmo-gprs-sm1 (= 0.2.1.202601231800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-sm-dev_0.2.1.202601231800_armhf.deb Size: 26032 MD5sum: 2bb198fa7552bb0b6e07ab4b1c248f77 SHA1: 7d2e60fdac408746211e4b5bdac2e35774f14809 SHA256: 87f4dc01285c5eb69122d5c0ce66003bc613d3929631f5e64c20510f463dbbcc Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-sm Package: libosmo-gprs-sm1 Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmo-gprs-gmm1, libosmo-gprs-sndcp1, libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-sm1_0.2.1.202601231800_armhf.deb Size: 22004 MD5sum: dd23ddca54894ac14504c84649bf3290 SHA1: 6ba314131d6bf3e60b9c7afb189c9acc1fcc482b SHA256: ca0297ab4d764dd88206460e2f79696ab7852cb79b7222cf9653a9cf63f1537e Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom SM (Session Management) layer for GPRS and EGPRS Package: libosmo-gprs-sm1-dbgsym Source: libosmo-gprs Version: 0.2.1.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 77 Depends: libosmo-gprs-sm1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-gprs-sm1-dbgsym_0.2.1.202601231800_armhf.deb Size: 61788 MD5sum: 84760b51bf5d54fced5285b94c515129 SHA1: 65b91096f530732cbffa25a0b8a20db6e237ccae SHA256: efc640bce3a5814e7219960f4899ff5094af19d649baa313480eeff37c24b3cb Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-sm1 Build-Ids: de94e40d515429a79b96d28f001ac3aa6723a979 Package: libosmo-gprs-sndcp-dbg Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 17 Depends: osmocom-nightly (= 202601231800), libosmo-gprs-sndcp1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-gprs-sndcp-dbg_0.2.1.202601231800_armhf.deb Size: 9712 MD5sum: 3b69029b2fb8001d065822903d0089e3 SHA1: bb91027ac4c56c0ceb66d745672fac6dda1f509f SHA256: b0b270d3e992dbfb5a06612a4c7a78be469ffc7b124f0e209bb8edd506f5fddd Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Debug symbols for libosmo-gprs-sndcp Package: libosmo-gprs-sndcp-dev Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 146 Depends: osmocom-nightly (= 202601231800), libosmo-gprs-sndcp1 (= 0.2.1.202601231800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-gprs-sndcp-dev_0.2.1.202601231800_armhf.deb Size: 45484 MD5sum: fc007e5164925201d625201f610fb1a9 SHA1: e7f6cfcca1eb41cf423d4c3e372d54cf2022bfbf SHA256: bf1083c8b6b5fa2e75afbfa8303b2942bb53a5398a52a76b6f9e78c87a07d524 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Development headers and libraries for libosmo-gprs-sndcp Package: libosmo-gprs-sndcp1 Source: libosmo-gprs Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 152 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gprs-sndcp1_0.2.1.202601231800_armhf.deb Size: 42312 MD5sum: 37ad70861238f84d18eea262c431b9ef SHA1: f68d1e55180010954a66d72ecec044b0759677cc SHA256: 80bfc11766e845e614d881b66d81402715cd479fc9a386b39f47addabb05f753 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-gprs Description: Osmocom SNDCP (Subnetwork Dependent Convergence Protocol) layer for GPRS and EGPRS Package: libosmo-gprs-sndcp1-dbgsym Source: libosmo-gprs Version: 0.2.1.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 136 Depends: libosmo-gprs-sndcp1 (= 0.2.1.202601231800) Filename: ./armhf/libosmo-gprs-sndcp1-dbgsym_0.2.1.202601231800_armhf.deb Size: 120204 MD5sum: 123bdeb1a5aab05c8caa268793528965 SHA1: 53f467bc86f4e621bf789d1c7f1b838e10f05122 SHA256: 01965ef395a8a766bc28fe644b13325273d96078edaee314a181192066c8bfbb Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-gprs-sndcp1 Build-Ids: cada6310fef1056d3245b3144649b525f1d3e30b Package: libosmo-gsup-client-dev Source: osmo-hlr Version: 1.9.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 77 Depends: osmocom-nightly (= 202601231800), libosmo-gsup-client0 (= 1.9.2.202601231800), libosmocore-dev Filename: ./armhf/libosmo-gsup-client-dev_1.9.2.202601231800_armhf.deb Size: 23588 MD5sum: 4224a5a093478f36442c7a6680f2f0c9 SHA1: 12975e6a32f33d4ff14d1a2d75ac424b45ea6a0a SHA256: 0fa277e4f9efc4fa7ab3baf53191eccf384325058a6bcec2f2c42e5c26e32580 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Development headers of Osmocom GSUP client library This is a shared library that can be used to implement client programs for the GSUP protocol. The typical GSUP server is OsmoHLR, with OsmoMSC, OsmoSGSN and External USSD Entities (EUSEs) using this library to implement clients. . This package contains the development headers. Package: libosmo-gsup-client0 Source: osmo-hlr Version: 1.9.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 85 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmoabis15, libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-gsup-client0_1.9.2.202601231800_armhf.deb Size: 19656 MD5sum: d018b626d5bf01e518352d895f6a258b SHA1: 7917dfbb15d31cf642fb5fd15cf12257425b1138 SHA256: 0403a255ac865e0fa37b19254edab0d2e2562fbfce29ae32075994794a5d76f8 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Osmocom GSUP (General Subscriber Update Protocol) client library This is a shared library that can be used to implement client programs for the GSUP protocol. The typical GSUP server is OsmoHLR, with OsmoMSC, OsmoSGSN and External USSD Entities (EUSEs) using this library to implement clients. Package: libosmo-gtlv-dbg Source: libosmo-pfcp Version: 0.6.0.1.0383.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 55 Depends: osmocom-nightly (= 202601231800), libosmo-gtlv1 (= 0.6.0.1.0383.202601231800) Filename: ./armhf/libosmo-gtlv-dbg_0.6.0.1.0383.202601231800_armhf.deb Size: 41472 MD5sum: 50e4409f74ecbc9549714d4bbf06f816 SHA1: 327234faf8713572459f35581ac49652f7c45a9f SHA256: 531b17a0e7e6dadce9d469fe88390571cb6854038395a5b636b97f675eeada29 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Debug symbols for libosmo-gtlv libosmo-gtlv implements decoding, encoding and logging of protocols using a Tag-Length-Value and/or Tag-Length-Instance-Value structure. This package in particular contains the debug symbols for this library. Build-Ids: c173ce158725f9ed3a807cc6625424dcd6d6f48b Package: libosmo-gtlv-dev Source: libosmo-pfcp Version: 0.6.0.1.0383.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 184 Depends: osmocom-nightly (= 202601231800), libosmo-gtlv1 (= 0.6.0.1.0383.202601231800), libosmocore-dev (>= 1.12.0), libtalloc-dev (>= 2.1.0) Filename: ./armhf/libosmo-gtlv-dev_0.6.0.1.0383.202601231800_armhf.deb Size: 55700 MD5sum: 2987fa28561309ad22300135611c880a SHA1: b582c4eb9fc40491f3bac2667a0523987fd57cc9 SHA256: 8ed85b2a32f8d0f184eea3b24f04f641db1c9665328e2dd23873e11ea2ec2f69 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Development files for libosmo-gtlv libosmo-gtlv implements decoding, encoding and logging of protocols using a Tag-Length-Value and/or Tag-Length-Instance-Value structure. This package in particular contains the files for compiling a program using this library. Package: libosmo-gtlv1 Source: libosmo-pfcp Version: 0.6.0.1.0383.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 81 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmo-gtlv1_0.6.0.1.0383.202601231800_armhf.deb Size: 15116 MD5sum: 9fcb7cbad7d923c17cee9f639e1ebaef SHA1: 91b30dc98f325141abca8ae5b75335f99d2ea5b9 SHA256: 7a9d94581c48de8981f6385152df4e3ae80f7c14de346f1d29284d7e4bf98df7 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Generic TLV and TLIV protocol support Decoding, encoding and logging of protocols using a Tag-Length-Value and/or Tag-Length-Instance-Value structure. Package: libosmo-hnbap-dbg Source: osmo-iuh Version: 1.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 301 Depends: osmocom-nightly (= 202601231800), libosmo-hnbap0 (= 1.8.0.202601231800) Filename: ./armhf/libosmo-hnbap-dbg_1.8.0.202601231800_armhf.deb Size: 198308 MD5sum: 4b29ed020916e76c7cdbbd4b4b078123 SHA1: a20113a09fddc06778347c58feb70b78ec24f8fe SHA256: 3bc9540b9d220a71af9ad64dfb9977edd4e7a4fd6e2afcff1c399e123331243d Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Build-Ids: dad06e53c0143858e3ac6b64074901cdf2831358 Package: libosmo-hnbap-dev Source: osmo-iuh Version: 1.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 257 Depends: osmocom-nightly (= 202601231800), libosmo-hnbap0 (= 1.8.0.202601231800) Filename: ./armhf/libosmo-hnbap-dev_1.8.0.202601231800_armhf.deb Size: 25504 MD5sum: 511c98ec5707f7d94df78c521917269c SHA1: 1c66208f786b88005a3f00fbdfa536d87537b424 SHA256: c410d47d8eb7b3fd265ca589d709af4d77602674d675c25934345fdcbff79e93 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-hnbap0 Source: osmo-iuh Version: 1.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 297 Depends: osmocom-nightly (= 202601231800), libasn1c1, libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-hnbap0_1.8.0.202601231800_armhf.deb Size: 44808 MD5sum: 8254b2e932569a8cb6b3483b8d84af5a SHA1: 8da23682b249b2f4a54cf5d8137aea7fcf266606 SHA256: 068a37f78c68df299ff1b6e0d604dd41a2ef74d2ce828ca4035a4cb0ff029884 Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-iuh-dev Source: osmo-iuh Version: 1.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 19 Depends: osmocom-nightly (= 202601231800) Filename: ./armhf/libosmo-iuh-dev_1.8.0.202601231800_armhf.deb Size: 7432 MD5sum: 4b094c2a8fb335256bb508482cbfc605 SHA1: 5fe63351f452b9bead1827a98947497e6a65043f SHA256: 1b409c8c5092badc6e1e0233e06210920be4c538f99f5e8687d227ca5b4ef811 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (common header files) Package: libosmo-mgcp-client-dev Source: osmo-mgw Version: 1.15.0.1.8afba.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 181 Depends: osmocom-nightly (= 202601231800), libosmo-mgcp-client14 (= 1.15.0.1.8afba.202601231800) Filename: ./armhf/libosmo-mgcp-client-dev_1.15.0.1.8afba.202601231800_armhf.deb Size: 60240 MD5sum: 3f7bdbe5b029dc624dc0c71c68bfdc62 SHA1: c908b3f0fa71f752e9fc6edd26fa5ee4d588ffef SHA256: 023a8a4d66d6977360df13483267f5bccf917b4559d587d07c718b4e764ac3bd Section: libdevel Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/osmo-mgw Description: libosmo-mgcp-client: Osmocom's Media Gateway Control Protocol client utilities Package: libosmo-mgcp-client14 Source: osmo-mgw Version: 1.15.0.1.8afba.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 159 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.7), libosmocore22, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-mgcp-client14_1.15.0.1.8afba.202601231800_armhf.deb Size: 55160 MD5sum: 3a472dd642061ae2ef82498aa1b4e1e1 SHA1: 887572c18b5bee3b081722da7d794159fdc9597c SHA256: 65abfc18bef6b9aa8eecf642aef01e2f754ea3c9a06bea1c3f30ba39ba24a3b8 Section: libs Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/osmo-mgw Description: libosmo-mgcp-client: Osmocom's Media Gateway Control Protocol client utilities Package: libosmo-mgcp-client14-dbgsym Source: osmo-mgw Version: 1.15.0.1.8afba.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 122 Depends: libosmo-mgcp-client14 (= 1.15.0.1.8afba.202601231800) Filename: ./armhf/libosmo-mgcp-client14-dbgsym_1.15.0.1.8afba.202601231800_armhf.deb Size: 102560 MD5sum: 4e1dc8db58120e89238fe5e1731d8633 SHA1: e7d707cb9a7b0c73bc61a05ba496259e7afde5d2 SHA256: 86faa55bd6806e86ada61ab64e3735df3e21c6b1921b702e63e3014429c58c7e Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-mgcp-client14 Build-Ids: 008ca4d488ea91fa1bd84f19907e1b84d5858855 Package: libosmo-mslookup-dev Source: osmo-hlr Version: 1.9.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 96 Depends: osmocom-nightly (= 202601231800), libosmo-mslookup1 (= 1.9.2.202601231800), libosmocore-dev Filename: ./armhf/libosmo-mslookup-dev_1.9.2.202601231800_armhf.deb Size: 28124 MD5sum: 1d52dfb1d8b1eb8ecbcf24cddd666f5e SHA1: eca74c99fd6766451d6d7c610907fc7d37c8b4d5 SHA256: 412af256083997ecc21a1f423421d81d76d033262487489d1fc1ab5d2f937ba7 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Development headers of Osmocom MS lookup library This shared library contains routines for looking up mobile subscribers. . This package contains the development headers. Package: libosmo-mslookup1 Source: osmo-hlr Version: 1.9.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 85 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-mslookup1_1.9.2.202601231800_armhf.deb Size: 21648 MD5sum: c91d3f9518458142b659b63d764c7451 SHA1: 58b25077baded13927fbef27ed163500ce0d3699 SHA256: 8bb37c452364e96dee73f309f602fb800c786a550fe6d0a24ca2306826e6594e Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Osmocom MS lookup library This shared library contains routines for looking up mobile subscribers. Package: libosmo-netif-dbg Source: libosmo-netif Version: 1.7.0.6.71a8.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 234 Depends: osmocom-nightly (= 202601231800), libosmonetif11 (= 1.7.0.6.71a8.202601231800) Filename: ./armhf/libosmo-netif-dbg_1.7.0.6.71a8.202601231800_armhf.deb Size: 202368 MD5sum: b50ee5ba30e4bd0416ebfde4e6a74131 SHA1: 2a6208a2716987e2bdffaa97927b1a4a52effe83 SHA256: 4eda894f569cf96318923c7f9ef71546104cb5f65dd61e3d10bc0c9d0d7a41ec Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-netif Description: Debug symbols for Osmocom network interface library The libosmo-netif library is one of the libraries needed by the OpenBSC GSM infrastructure software. This library in particular implements the shared code for network interfaces. . This package contains the debug symbols for the library. Build-Ids: ff8ad8f6bf9a31e09fb59b2ca854609be467be89 Package: libosmo-netif-dev Source: libosmo-netif Version: 1.7.0.6.71a8.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 305 Depends: osmocom-nightly (= 202601231800), libosmocore-dev, libosmocore, libosmonetif11 (= 1.7.0.6.71a8.202601231800) Filename: ./armhf/libosmo-netif-dev_1.7.0.6.71a8.202601231800_armhf.deb Size: 83700 MD5sum: 58675e7269cbd37826769c06654200c5 SHA1: 5dc4fdafc1fb39f0fa8e1e5de7593b7c8e9e01a1 SHA256: 664d6ab7ae065a3e4f0eb68650d4ae4c4d14eba85cb48851fb6a1350a5586685 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-netif Description: Development headers for Osmocom network interface The libosmo-netif library is one of the libraries needed by the OpenBSC GSM infrastructure software. This library in particular implements the shared code for network interfaces. . This package contains the development files needed for developing with the libosmo-netif library. Package: libosmo-netif-doc Source: libosmo-netif Version: 1.7.0.6.71a8.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 2100 Depends: osmocom-nightly (= 202601231800), libosmonetif11, libjs-jquery Filename: ./all/libosmo-netif-doc_1.7.0.6.71a8.202601231800_all.deb Size: 190364 MD5sum: fd897547495e10af4f1282f85ac4b413 SHA1: 54a67b11fea61ee56f73e72d4a3b53bc7f8bae48 SHA256: a1427c1b5083346206c0256a0bad9fa116d2f75e885f5aa3562a92a13a6f3156 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmo-netif Description: Documentation for the Osmo network interface library The libosmo-netif library is one of the libraries needed by the OpenBSC GSM infrastructure software. This library in particular implements the shared code for network interfaces. . This package contains the documentation for the libosmo-netif library. Package: libosmo-octoi-dev Source: osmo-e1d Version: 0.7.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 113 Depends: osmocom-nightly (= 202601231800), libosmo-octoi3 (= 0.7.2.202601231800), libosmocore-dev Filename: ./armhf/libosmo-octoi-dev_0.7.2.202601231800_armhf.deb Size: 32788 MD5sum: 8a61ad37a7bf722efdc179c99ac36b41 SHA1: 7ee2800b19c26fe6e4bd8b37f1fa9c9c176fa333 SHA256: 4b7a2c5dcae6ae11e4f82b3b562b4d75a4e2e3ca4d5fa00c322649c0631bfe9c Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: Development headers for the Osmocom Community TDMoIP library. Package: libosmo-octoi3 Source: osmo-e1d Version: 0.7.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 86 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmocore22, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-octoi3_0.7.2.202601231800_armhf.deb Size: 28340 MD5sum: f6e9c513cf6581efe3cad6e7cd9544a3 SHA1: cc4d726122a0cc7c5c0917f23141446408126ac9 SHA256: 512214c5cf542a50061a5d09820b3454474dc5275dfd6d4bb555327ce4ae5692 Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: Library for the Osmocom Community TDMoIP network. Package: libosmo-octoi3-dbgsym Source: osmo-e1d Version: 0.7.2.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 111 Depends: libosmo-octoi3 (= 0.7.2.202601231800) Filename: ./armhf/libosmo-octoi3-dbgsym_0.7.2.202601231800_armhf.deb Size: 92280 MD5sum: 2b1d107b6d022f45a79e9fa12f2cfb2c SHA1: 1ed6df60f19a85d080983350d4b1e0c840fc719d SHA256: d935b45690cb5162a74befb03dcb650e36879fec481d621d9c0f8b06cf9af635 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-octoi3 Build-Ids: 1eb54a0a32af5040d2e7019e1ce03aeccf785989 Package: libosmo-pfcp Version: 0.6.0.1.0383.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 10 Depends: osmocom-nightly (= 202601231800), libosmo-gtlv1 (= 0.6.0.1.0383.202601231800), libosmo-pfcp4 (= 0.6.0.1.0383.202601231800) Filename: ./armhf/libosmo-pfcp_0.6.0.1.0383.202601231800_armhf.deb Size: 3964 MD5sum: 050e5a48b88bc1a571f2ae7052c239c3 SHA1: 46f49a12fb0d9484410d28cefb5216c23eecf768 SHA256: 7642f1e2d1a28c3870b6f30d2102dcbfc3f8734fcc912b704c28e939c3247899 Section: libs Priority: optional Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Osmocom PFCP protocol implementation (metapackage) Install Osmocom PFCP and generic TLV protocol libraries. Package: libosmo-pfcp-dbg Source: libosmo-pfcp Version: 0.6.0.1.0383.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 159 Depends: osmocom-nightly (= 202601231800), libosmo-pfcp4 (= 0.6.0.1.0383.202601231800) Filename: ./armhf/libosmo-pfcp-dbg_0.6.0.1.0383.202601231800_armhf.deb Size: 136556 MD5sum: 2f87fbec564756965ee800093d17620b SHA1: 6a86c18b609df7f185eb7e2a07f360111dc13491 SHA256: 55848f489ec81205f4c2eab384655f3c7a79c27cc8a9178bcd46d4fdf0452fee Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Debug symbols for libosmo-pfcp libosmo-pfcp implements decoding, encoding and endpoint implementation of the Packet Forwarding Control Protocol (3GPP TS 29.244). This package in particular contains the debug symbols for this library. Build-Ids: db4c93c34233761fcbddadaa01d00d8c13921371 Package: libosmo-pfcp-dev Source: libosmo-pfcp Version: 0.6.0.1.0383.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 697 Depends: osmocom-nightly (= 202601231800), libosmo-pfcp4 (= 0.6.0.1.0383.202601231800), libosmo-gtlv-dev (= 0.6.0.1.0383.202601231800), libosmocore-dev, libtalloc-dev Filename: ./armhf/libosmo-pfcp-dev_0.6.0.1.0383.202601231800_armhf.deb Size: 172408 MD5sum: d1dc2b6f770c50331bc4f571feac0f7f SHA1: 9b47744e152d2c4dddaec2a454ac190f3dab288b SHA256: f01e663a2c69b83995ad40abcb77c5fc3b73899292688f61aacc9e4591e66e39 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: Development files for libosmo-pfcp libosmo-pfcp implements decoding, encoding and endpoint implementation of the Packet Forwarding Control Protocol (3GPP TS 29.244). This package in particular contains the files for compiling a program using this library. Package: libosmo-pfcp4 Source: libosmo-pfcp Version: 0.6.0.1.0383.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 146 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmo-gtlv1 (= 0.6.0.1.0383.202601231800), libosmocore22, libosmogsm20, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmo-pfcp4_0.6.0.1.0383.202601231800_armhf.deb Size: 36748 MD5sum: 4a3848dd7ffbcacfeec06576ce43733c SHA1: d94dfd9e15fc489d2b5245413e561c98ee00d271 SHA256: 38097abb90c7fab343a711de5c734ef9a9ed832f2cfc877b15c354dfdd951f30 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-pfcp Description: PFCP protocol support Decoding, encoding and endpoint implementation of the Packet Forwarding Control Protocol (3GPP TS 29.244). Package: libosmo-ranap-dbg Source: osmo-iuh Version: 1.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1495 Depends: osmocom-nightly (= 202601231800), libosmo-ranap7 (= 1.8.0.202601231800) Filename: ./armhf/libosmo-ranap-dbg_1.8.0.202601231800_armhf.deb Size: 1005684 MD5sum: 8f7ab7ec646837143143268e3085caf9 SHA1: 505dfe035fef2347f720eb13fed905dadee899fd SHA256: 4d6c3df6d49086acd64f83ec06fd3833abd710443c7aa4c751cc3b1f43d971fc Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Build-Ids: 9f668310adad4d3983222bc1dbce865e700fb453 Package: libosmo-ranap-dev Source: osmo-iuh Version: 1.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1311 Depends: osmocom-nightly (= 202601231800), libosmo-ranap7 (= 1.8.0.202601231800), libosmo-iuh-dev Filename: ./armhf/libosmo-ranap-dev_1.8.0.202601231800_armhf.deb Size: 92924 MD5sum: aad93d082d826796a384f23177fe058d SHA1: 86802a2188188447e74c3f67ccc9c6dcf8a23140 SHA256: 7747476b15c5916cf8025de766f801a9a37ed434f88188329d775f23a16a409a Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-ranap7 Source: osmo-iuh Version: 1.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1401 Depends: osmocom-nightly (= 202601231800), libasn1c1, libc6 (>= 2.4), libosmo-sigtran12, libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-ranap7_1.8.0.202601231800_armhf.deb Size: 188224 MD5sum: 61e57f8c97140d9ed0862388813a9c3c SHA1: e1b57fe2394a1c8433e348f5f597531c4375e233 SHA256: 2459611b2b4196362e468465ca7f5c4d7492de2d20213ba797e10083e23a8a8c Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-rspro-dev Source: osmo-remsim Version: 1.1.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 298 Depends: osmocom-nightly (= 202601231800) Filename: ./armhf/libosmo-rspro-dev_1.1.2.202601231800_armhf.deb Size: 63088 MD5sum: 3aec0f0ee62bcd39a33a6ca7d4607282 SHA1: 5149047885a44013c90832973771b40e1a2c1920 SHA256: 02cd274b5cdea3480a4926e501d5c4ed32f9a45577a6149d74b1d3951515f39f Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Shared Library Development Haders libosmo-rsrpo is an utility library for encoding/decoding the ASN.1 BER based RSPRO (Remote SIM Protocol) protocol used between the osmo-remsim programs. Package: libosmo-rspro2 Source: osmo-remsim Version: 1.1.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 220 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-rspro2_1.1.2.202601231800_armhf.deb Size: 55668 MD5sum: 725a5801b378279fdb7c71dfa768429a SHA1: 911eb1eebc46da49635e4547fe7ebb059743bf53 SHA256: e6d9fb1628315919285428596c7579453447a7380096e080a3825a528b3824d5 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Shared Library libosmo-rsrpo is an utility library for encoding/decoding the ASN.1 BER based RSPRO (Remote SIM Protocol) protocol used between the osmo-remsim programs. Package: libosmo-rspro2-dbgsym Source: osmo-remsim Version: 1.1.2.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 251 Depends: libosmo-rspro2 (= 1.1.2.202601231800) Filename: ./armhf/libosmo-rspro2-dbgsym_1.1.2.202601231800_armhf.deb Size: 214276 MD5sum: 0a0e6645ec62e94def9a1c3f30639e58 SHA1: 5c32967ee890689642a949364fc1ea2ef0087498 SHA256: 55a02e3c4419fbe155d001f240b3b5622709da7247692de15cf00cf7bc7e18aa Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-rspro2 Build-Ids: 06a5461b078164cd73ca85afb9056a62f3259a1b Package: libosmo-rua-dbg Source: osmo-iuh Version: 1.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 141 Depends: osmocom-nightly (= 202601231800), libosmo-rua0 (= 1.8.0.202601231800) Filename: ./armhf/libosmo-rua-dbg_1.8.0.202601231800_armhf.deb Size: 95748 MD5sum: 60b8eb9432ccc17ca28e763b4cfbeac7 SHA1: d96e490e8946830002c0205ee66935cbedf94f9b SHA256: a87be6b401651dae8d1414a4ef076c23d736c09d869776084abd8642c155d690 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Build-Ids: cb59fdde5882d90df503c4396bdf638493f33642 Package: libosmo-rua-dev Source: osmo-iuh Version: 1.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 101 Depends: osmocom-nightly (= 202601231800), libosmo-rua0 (= 1.8.0.202601231800) Filename: ./armhf/libosmo-rua-dev_1.8.0.202601231800_armhf.deb Size: 15352 MD5sum: 6a281edcea22a846abe60affc4fcedea SHA1: 6986b4ca33aa586b6fe9a04d4f972b4be734685c SHA256: 3f52ea37b6dd0e68c5f8f2b53ecdee0fe934c37f3d2e0b004ad65cfc566dbcc1 Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-rua0 Source: osmo-iuh Version: 1.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 157 Depends: osmocom-nightly (= 202601231800), libasn1c1, libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-rua0_1.8.0.202601231800_armhf.deb Size: 25504 MD5sum: 03ef8eb4d27171a560f53238cddf6fb8 SHA1: a1f8d700bbd1ca5a890242434cc62bd1852aea40 SHA256: b2531323f290b9bf49895800e5fb5ec2a74ed9d1c6abe9dc40981f24072a5f8d Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (HNBAP, RUA, RANAP) Package: libosmo-sabp-dbg Source: osmo-iuh Version: 1.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 192 Depends: osmocom-nightly (= 202601231800), libosmo-sabp1 (= 1.8.0.202601231800) Filename: ./armhf/libosmo-sabp-dbg_1.8.0.202601231800_armhf.deb Size: 125420 MD5sum: 1430b8aab11216b5ba753015138f2655 SHA1: 56f775c0292bdc48df14c2190ca6c5a7121443ae SHA256: 743f2db4816959bc9101921f5005e4475ba61c24c0c815c6f68ab052d538ddd4 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (SABP) Build-Ids: 75bf22e7ae25de2640b52a9f2544e29b7fbd7ced Package: libosmo-sabp-dev Source: osmo-iuh Version: 1.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 158 Depends: osmocom-nightly (= 202601231800), libosmo-sabp1 (= 1.8.0.202601231800) Filename: ./armhf/libosmo-sabp-dev_1.8.0.202601231800_armhf.deb Size: 18408 MD5sum: aeb8be45cb7900b547e82de7ffdd3230 SHA1: 1642c97ce2e5874780686d648ba32a2b73016740 SHA256: a82ed5e588d5a2ddd7d7822b1216914729196a3783b78628c0799e7d0371bfdd Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (SABP) Package: libosmo-sabp1 Source: osmo-iuh Version: 1.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 224 Depends: osmocom-nightly (= 202601231800), libasn1c1, libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-sabp1_1.8.0.202601231800_armhf.deb Size: 32188 MD5sum: 1e5e1c0dc83c229291bbff4d81d6228a SHA1: 2316c8b7ce33256256f4f48c3cb4b8498df46406 SHA256: 89ca4ea6b6b8df3bc07651da36443a19c156cff4cd0a8eb38314c76e90b4ee0a Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmohnbgw Description: Osmocom code for the Iuh interface (SABP) Package: libosmo-sbcap-dev Source: osmo-cbc Version: 0.5.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 3541 Depends: osmocom-nightly (= 202601231800), libosmo-sbcap2 (= 0.5.2.202601231800) Filename: ./armhf/libosmo-sbcap-dev_0.5.2.202601231800_armhf.deb Size: 514472 MD5sum: 45ed84e460d059a2085f4299cd448993 SHA1: a45fa5012029d041fbbfa9eefbc8082435ae63ff SHA256: f5420f9b33b468d479797a6410cd2b6a2fe84db92d6889e5eab8634fb623f64c Section: libdevel Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: libosmo-sbcap: Osmocom's library to encode/decode SBc-AP messages Package: libosmo-sbcap2 Source: osmo-cbc Version: 0.5.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1913 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmocore22 Filename: ./armhf/libosmo-sbcap2_0.5.2.202601231800_armhf.deb Size: 345736 MD5sum: db869d00d0e3555b2821c9c2b98559d8 SHA1: 20c185cd40f14d470cbf0f03db876ee0bc0c38c7 SHA256: 8c876099b22e194af41090566db14e393010b1d3e5a3f806dd5f163ae4dae69e Section: libs Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: libosmo-sbcap: Osmocom's library to encode/decode SBc-AP messages Package: libosmo-sigtran-dbg Source: libosmo-sigtran Version: 2.2.1.4.74d0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 679 Depends: osmocom-nightly (= 202601231800), libosmo-sigtran12 (= 2.2.1.4.74d0.202601231800) Filename: ./armhf/libosmo-sigtran-dbg_2.2.1.4.74d0.202601231800_armhf.deb Size: 629180 MD5sum: 4f0b0ff00b63ba13c908d32d7aadf54f SHA1: 429f203fc9dc1cd3fa8c0e0e7c70ea6872d3b452 SHA256: 45b795cff3940db06da43a60d45cf196670e557261c4241fce174878cda3c789 Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Documentation for the Osmocom SIGTRAN library libosmo-sigtran is a shared library containing SS7/SIGTRAN related functionality, including connection-less and connection-oriented SCCP as per ITU-T Q.71x, M3UA (MTP3 User Adaptation) according to IETF RFC4666, SUA (SCCP User Adpatation) according to IETF RFC3868 as well as MTP-level routing function and handling of signaling links, linksets, ASPs, SGs, etc. Build-Ids: aed92718dc5e5fbc9f2c16d0fbba5ce3b7d3128e Package: libosmo-sigtran-dev Source: libosmo-sigtran Version: 2.2.1.4.74d0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2766 Depends: osmocom-nightly (= 202601231800), libosmo-sigtran12 (= 2.2.1.4.74d0.202601231800), libosmocore-dev, libosmo-asn1-tcap-dev, libosmo-netif-dev Filename: ./armhf/libosmo-sigtran-dev_2.2.1.4.74d0.202601231800_armhf.deb Size: 782888 MD5sum: 3bb1e15f5e3259f52a1ea68f6817d52a SHA1: ad0e71269a849e8f189089e3acff351fb8f711b4 SHA256: 09118b9dba8d99f8d36ae155dd04e9d22f8401aaa2e0ebb668211be66f80994d Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Development headers for the Osmocom SIGTRAN library libosmo-sigtran is a shared library containing SS7/SIGTRAN related functionality, including connection-less and connection-oriented SCCP as per ITU-T Q.71x, M3UA (MTP3 User Adaptation) according to IETF RFC4666, SUA (SCCP User Adpatation) according to IETF RFC3868 as well as MTP-level routing function and handling of signaling links, linksets, ASPs, SGs, etc. Package: libosmo-sigtran-doc Source: libosmo-sigtran Version: 2.2.1.4.74d0.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 11851 Depends: osmocom-nightly (= 202601231800), libosmo-sigtran12 (= 2.2.1.4.74d0.202601231800), libjs-jquery Filename: ./all/libosmo-sigtran-doc_2.2.1.4.74d0.202601231800_all.deb Size: 609940 MD5sum: 443e24f1ba3c8b4d455bc3427da33ef6 SHA1: fbc12bab2a9832d0e03b17be573ed18e231c4e11 SHA256: 22300c131408625f94160a08ab706335ce6ba1938db5c780e633bbc6b3843d67 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Documentation for the Osmocom SIGTRAN library libosmo-sigtran is a shared library containing SS7/SIGTRAN related functionality, including connection-less and connection-oriented SCCP as per ITU-T Q.71x, M3UA (MTP3 User Adaptation) according to IETF RFC4666, SUA (SCCP User Adpatation) according to IETF RFC3868 as well as MTP-level routing function and handling of signaling links, linksets, ASPs, SGs, etc. Package: libosmo-sigtran12 Source: libosmo-sigtran Version: 2.2.1.4.74d0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 420 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmo-asn1-tcap1, libosmocore22, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmo-sigtran12_2.2.1.4.74d0.202601231800_armhf.deb Size: 143136 MD5sum: fc470e6e10852921850d4c4813695e23 SHA1: 6489ca70d8c6fe330c0729216b0020030b22c636 SHA256: 8233b33a4be0b9597f7e1a2f66194af5016ed39a5628f9db194f44241ede0494 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Osmocom SIGTRAN library (SCCP, SUA, M3UA and more) This is a shared library containing SS7/SIGTRAN related functionality, including connection-less and connection-oriented SCCP as per ITU-T Q.71x, M3UA (MTP3 User Adaptation) according to IETF RFC4666, SUA (SCCP User Adpatation) according to IETF RFC3868 as well as MTP-level routing function and handling of signaling links, linksets, ASPs, SGs, etc. Package: libosmo-simtrace2-1 Source: simtrace2 Version: 0.9.0.1.d0ad.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 82 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmocore22, libosmosim2, libusb-1.0-0 (>= 2:1.0.8) Filename: ./armhf/libosmo-simtrace2-1_0.9.0.1.d0ad.202601231800_armhf.deb Size: 12776 MD5sum: d8047e56e2660f7d634d4d2e7412d857 SHA1: dda803ab364ea2e4ce86cb6873e0974249a22b01 SHA256: a049c5efef7287b610d6c7d8829f5cbf5d937602315d6e0199fd57a8a30432d5 Section: libs Priority: optional Multi-Arch: same Homepage: http://osmocom.org/projects/simtrace2/wiki Description: Osmocom SIMtrace2 library This library contains core "driver" functionality to interface with the Osmocom SIMtrace2 (and compatible) USB device firmware. It enables applications to implement SIM card / smart card tracing as well as SIM / smart card emulation functions. Package: libosmo-simtrace2-1-dbgsym Source: simtrace2 Version: 0.9.0.1.d0ad.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 39 Depends: libosmo-simtrace2-1 (= 0.9.0.1.d0ad.202601231800) Filename: ./armhf/libosmo-simtrace2-1-dbgsym_0.9.0.1.d0ad.202601231800_armhf.deb Size: 25948 MD5sum: 9557776f56480db74987cbc47154a57e SHA1: c287f2bac8335806aca8997a1724d2898aca435b SHA256: 6a223f359a932fe9d79cef7d18f4af2ccdbd6a99c2dc006e855b7b556492ea25 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for libosmo-simtrace2-1 Build-Ids: dec3508e17a4f4b00e77b76cb39b3fce7d5d70a5 Package: libosmo-simtrace2-dev Source: simtrace2 Version: 0.9.0.1.d0ad.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 60 Depends: osmocom-nightly (= 202601231800), libosmo-simtrace2-1 Filename: ./armhf/libosmo-simtrace2-dev_0.9.0.1.d0ad.202601231800_armhf.deb Size: 18368 MD5sum: 0c8f540a5abfa0269d9d4151ea7afdb8 SHA1: b12478b1ca125e265d9ec65916b4a3fe3b0b7647 SHA256: d696f0b1557d5e25f7679ce42bf3092ceb21ac45e052e443dd66f65525a86c12 Section: libdevel Priority: optional Multi-Arch: same Homepage: http://osmocom.org/projects/simtrace2/wiki Description: Development headers for Osmocom SIMtrace2 library This library contains core "driver" functionality to interface with the Osmocom SIMtrace2 (and compatible) USB device firmware. It enables applications to implement SIM card / smart card tracing as well as SIM / smart card emulation functions. . The header files provided by this package may be used to develop with any of the libosmocore libraries. . Also static libraries are installed with this package. Package: libosmoabis15 Source: libosmo-abis Version: 2.1.0.8.c24d2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 218 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libosmoisdn0, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmoabis15_2.1.0.8.c24d2.202601231800_armhf.deb Size: 63936 MD5sum: a7c062df1bf03c52c7122cdd32cc06cf SHA1: 72bc9f6a52d17adb873c01161f7838a32515d7fc SHA256: 35e7567df2c80c83e1ab8580ddd6339de78641130dabeb36c5b6ed9f37cfdb5d Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: GSM A-bis handling This library contains common/shared code regarding the A-bis interface between the GSM Base transceiver station (BTS) and the GSM Base station controller BSC. . It also implements drivers for mISDN and DAHDI based E1 cards, as well as some A-bis/IP dialects. Package: libosmocodec-doc Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 4222 Depends: osmocom-nightly (= 202601231800), libosmocodec4, libjs-jquery Filename: ./all/libosmocodec-doc_1.12.0.39.e2bf.202601231800_all.deb Size: 476532 MD5sum: 893563c171d35757b8a4d6e736a074af SHA1: 3ffdd9d60a751a301301b887bab2cbd094f1c39e SHA256: c98e27cc462d6fc93fa71fa9cb52799f8276f308b17db76523595bef0324032f Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the osmo codec library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmocodec library. Package: libosmocodec4 Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 125 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmocore22 Filename: ./armhf/libosmocodec4_1.12.0.39.e2bf.202601231800_armhf.deb Size: 53404 MD5sum: 6a7ccf33a7c2ae1d906eacccd2636660 SHA1: 2defa0762ac9f3b149ac102203fa4160d6eaefc8 SHA256: 0b12f479516ca85d01d49e20b35c823b8f32a814db385d4609eef6367d15eb2a Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo codec library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmocodec library in particular contains the implementation of multiple GSM codecs: . - GSM 06.10 - GSM FR Codec - GSM 06.20 - GSM HR Codec - GSM 06.60 - GSM EFR Codec - GSM 06.90 - GSM AMR Codec Package: libosmocoding-doc Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 5278 Depends: osmocom-nightly (= 202601231800), libosmocoding0, libjs-jquery Filename: ./all/libosmocoding-doc_1.12.0.39.e2bf.202601231800_all.deb Size: 525664 MD5sum: 64a335540b7cb4419ae0a06365bd17d1 SHA1: a4c1667b21775d4538eec0a0deebd54410eb5c33 SHA256: 314e06812f8050b89ae625e033b1f40ce897ba830ac00774abc3d1d2e0808240 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the osmo coding library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmocoding library. Package: libosmocoding0 Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 189 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmocodec4, libosmocore22, libosmogsm20 Filename: ./armhf/libosmocoding0_1.12.0.39.e2bf.202601231800_armhf.deb Size: 70576 MD5sum: 1c3054cd1a8f8ca82d4369a8d8e42055 SHA1: 2dfda6a250d5582b183673db10ec842af32d1955 SHA256: b46f2798380cdb0e1c7374fafed9da5be7c3f85555899d3e445ec3885d4d7e2d Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo coding library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmocoding library in particular contains the implementation of GSM, GPRS and EDGE transcoding routines, migrated from OsmoBTS. Package: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 63 Depends: osmocom-nightly (= 202601231800), libosmocodec4 (= 1.12.0.39.e2bf.202601231800), libosmocoding0 (= 1.12.0.39.e2bf.202601231800), libosmocore22 (= 1.12.0.39.e2bf.202601231800), libosmogb14 (= 1.12.0.39.e2bf.202601231800), libosmogsm20 (= 1.12.0.39.e2bf.202601231800), libosmoisdn0 (= 1.12.0.39.e2bf.202601231800), libosmovty13 (= 1.12.0.39.e2bf.202601231800), libosmoctrl0 (= 1.12.0.39.e2bf.202601231800), libosmosim2 (= 1.12.0.39.e2bf.202601231800), libosmousb0 (= 1.12.0.39.e2bf.202601231800) Filename: ./armhf/libosmocore_1.12.0.39.e2bf.202601231800_armhf.deb Size: 45396 MD5sum: 77c90479bc0f501ab108b62005668b1f SHA1: 412f1099956f9e0e7b74f3ee37b8e3b46bd14f61 SHA256: 6163fea2b9680ca66bd5b30b93a86b646107b4f618e836008f678489049df321 Section: libs Priority: optional Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/libosmocore Description: Open Source MObile COMmunications CORE library (metapackage) The libraries provided by this package contain various utility functions. These were originally developed as part of the OpenBSC project but are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. Package: libosmocore-dbg Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2408 Depends: osmocom-nightly (= 202601231800), libosmocore (= 1.12.0.39.e2bf.202601231800) Filename: ./armhf/libosmocore-dbg_1.12.0.39.e2bf.202601231800_armhf.deb Size: 2156284 MD5sum: e0bac57b6c09b31ad8e07e4a2c6ecfd3 SHA1: faa16a45cac10621059559b376f069b1cf1ae046 SHA256: d2045353c5683ef76ce6d333374f53b0d5d210ccb97c9f3711787bb1b0817a5f Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Debug symbols for Open Source MObile COMmunications CORE library This proackage contains debug symbols for all the libraries that are part of libosmocore. . The libosmocore library contain various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. Build-Ids: 005579d4a79d62530e6c5916fe37b3a5b0c93bd2 13deab0099654b8712b03a1f367fc3039a7f6979 1e4d36c369d841ed14b60069cb1b4abf7e31ba0d 24dde9f6b7d7584dfe133c78f892bb17818e5415 4ae2cd4c9995f56c4686fded065ce173d40504c9 81333fec9522f54abb1b12a392f1261e0236dfc1 833d12233267edad3b0e0767839d9e4bff166932 84ac02f4faffd4badf1a9602a57f5b093f3fd503 8ee44dab812b8615600d27790c21901ca5b8b5c2 9856756e6695c2abe4315c1e49a566ee384dd7a0 a4051824d79a09022c9f93636ffdbc7267e1c5c7 aa0cfcbfd552d087b6e08c23fde8c62192adf34d ba5e51fbb9968d362cf2ebd6d4c38e4d25400726 ba614703aac6baf4eb85974dbc2b240bf1806685 cdd52b41d7f07330f637953eff71c940f715fa27 Package: libosmocore-dev Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 3354 Depends: osmocom-nightly (= 202601231800), libosmocore, libtalloc-dev (>= 2.1.0), libsctp-dev, libusb-1.0-0-dev, libmnl-dev Filename: ./armhf/libosmocore-dev_1.12.0.39.e2bf.202601231800_armhf.deb Size: 796324 MD5sum: e96afb52609620808d7009670b7565c9 SHA1: ebe3cb97d969abe96c3cab11b34a0c71a4af2b1d SHA256: c46cffb8aef658a6c7678181b0924fd64f37bbce4077eafaa175e1f8fe7c21a7 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Development headers for Open Source MObile COMmunications CORE library The header files provided by this package may be used to develop with any of the libosmocore libraries. . Also static libraries are installed with this package. Package: libosmocore-doc Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 17386 Depends: osmocom-nightly (= 202601231800), libosmocore22, libjs-jquery, libosmocodec-doc, libosmocoding-doc, libosmogsm-doc, libosmoisdn-doc, libosmovty-doc, libosmoctrl-doc, libosmogb-doc, libosmosim-doc, libosmousb-doc Filename: ./all/libosmocore-doc_1.12.0.39.e2bf.202601231800_all.deb Size: 1063616 MD5sum: 7dad8b392f74e36ceea5d37667e14c1f SHA1: a095b08a466fd0b3850a96fe0880a4e77beb19b0 SHA256: e8a99f76d8c45406babab29e8563e97ce9376b65c1bfb81025379def83e2bf6d Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo Core library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmocore library. Package: libosmocore-utils Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 389 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libtalloc2 (>= 2.1.0), python3, libosmocore Filename: ./armhf/libosmocore-utils_1.12.0.39.e2bf.202601231800_armhf.deb Size: 58184 MD5sum: 9ada284943cf972dce13eed723b4c7bc SHA1: dc08c4ec8263ab45b8ff175d3f48bad0a4d43fa1 SHA256: 7cd56d4d60392bfdeb3aa780e12c241e4536bb7404ad1976a4570a181fe9a1a3 Section: utils Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Utilities for gsm This package contains a program for frequency calculation for GSM called 'osmo-arfcn' and a program called 'osmo-auc-gen' that is used for testing GSM authentication, as well as 'osmo-config-merge', a tool for merging Osmocom configuration files. . They use the libosmocore library. The libosmocore library contain various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. Package: libosmocore22 Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 381 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.38), libmnl0 (>= 1.0.3-4~), libsctp1 (>= 1.0.12+dfsg), libsystemd0, libtalloc2 (>= 2.1.0), liburing2 (>= 2.3) Filename: ./armhf/libosmocore22_1.12.0.39.e2bf.202601231800_armhf.deb Size: 150872 MD5sum: bca987b225de338848362f1322dd3f15 SHA1: 2aa3967ee16d9a5c6b09c32fac0f0beed7e1ead1 SHA256: 15b87b50dbcdafc71d954339ab46d050168e306caa2f26ef5be87ddd13fdb80a Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo Core library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmocore library in particular is a collection of common code used in various sub-projects inside the Osmocom family of projects. Package: libosmoctrl-doc Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 3745 Depends: osmocom-nightly (= 202601231800), libosmoctrl0, libjs-jquery Filename: ./all/libosmoctrl-doc_1.12.0.39.e2bf.202601231800_all.deb Size: 455192 MD5sum: aa386ec889fd0352b2866035ae7ac64d SHA1: db8b7d3d9cad02035758dd3a4ce026791537b71a SHA256: 4de51e9aa6bd311003eff72d3abe4d9b721a0a70ec452761c870a5e8ede76422 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmocom CTRL library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmoctrl library. Package: libosmoctrl0 Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 125 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmoctrl0_1.12.0.39.e2bf.202601231800_armhf.deb Size: 59428 MD5sum: 054caaef5536dde697adb52385311170 SHA1: 37ea3f894011e32378bd101a3dc034a54ff4885f SHA256: 118a4198347b4645b018461488737066aea3209d8b5e30c66edaf5aea8cda58b Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo control library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmoctrl library in particular contains an SNMP-like status interface. Package: libosmodsp-dbg Source: libosmodsp Version: 0.4.0.12.f6f4.202601231800 Architecture: armhf Maintainer: Harald Welte Installed-Size: 36 Depends: osmocom-nightly (= 202601231800), libosmodsp0 (= 0.4.0.12.f6f4.202601231800) Filename: ./armhf/libosmodsp-dbg_0.4.0.12.f6f4.202601231800_armhf.deb Size: 21700 MD5sum: e8578eb09b9d7026ab59065646fd7471 SHA1: f3eb3740349bb1544be1d598590abb1050425532 SHA256: 1c3346254ca34f61c8a7694e00ba0ffd8b15e68e96e660e879cc11b65b548277 Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/libosmo-dsp Description: Debug symbols for Osmocom DSP library C-language library for common DSP (Digital Signal Processing) primitives for SDR (Software Defined Radio). They are part of the Osmocom (Open Source Mobile Communications) project. . This package contains the debug symbols for the library. Build-Ids: 01ded41626721cd4bbb0187ff48a69a9a4e46ba0 Package: libosmodsp-dev Source: libosmodsp Version: 0.4.0.12.f6f4.202601231800 Architecture: armhf Maintainer: Harald Welte Installed-Size: 45 Depends: osmocom-nightly (= 202601231800), libosmodsp0 (= 0.4.0.12.f6f4.202601231800) Filename: ./armhf/libosmodsp-dev_0.4.0.12.f6f4.202601231800_armhf.deb Size: 11196 MD5sum: df0e60c95dc02c2c55257cc203b35d26 SHA1: 8564235fa887d1f22ad1349b068accdce137f953 SHA256: f184cf2e090d3cc1820edef9f7dc63d63aa337a56f42ce65d8a6dfaa0cae4a2a Section: libdevel Priority: optional Multi-Arch: same Homepage: https://osmocom.org/projects/libosmo-dsp Description: Development headers for Osmocom DSP Library C-language library for common DSP (Digital Signal Processing) primitives for SDR (Software Defined Radio). They are part of the Osmocom (Open Source Mobile Communications) project. . This package contains the development files needed for developing with the libosmodsp library. Package: libosmodsp-doc Source: libosmodsp Version: 0.4.0.12.f6f4.202601231800 Architecture: all Maintainer: Harald Welte Installed-Size: 917 Depends: osmocom-nightly (= 202601231800), libosmodsp0, libjs-jquery Filename: ./all/libosmodsp-doc_0.4.0.12.f6f4.202601231800_all.deb Size: 117368 MD5sum: 7b62a1b19575c3fdd3c2d9184207d93d SHA1: d06db625b5bf20e8383a6c84168b711606c44952 SHA256: 388597cf85398d512b86c595efbf596e647ecfa2eaf2a84c99228df033292ee0 Section: doc Priority: optional Homepage: https://osmocom.org/projects/libosmo-dsp Description: Documentation for the Osmocom DSP Library C-language library for common DSP (Digital Signal Processing) primitives for SDR (Software Defined Radio). They are part of the Osmocom (Open Source Mobile Communications) project. . This package contains the documentation for the libosmodsp library. Package: libosmodsp0 Source: libosmodsp Version: 0.4.0.12.f6f4.202601231800 Architecture: armhf Maintainer: Harald Welte Installed-Size: 80 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libfftw3-single3 (>= 3.3.10) Filename: ./armhf/libosmodsp0_0.4.0.12.f6f4.202601231800_armhf.deb Size: 8952 MD5sum: 5919c2fa337d34cb622f29080b0ce4c5 SHA1: 235808cab8d8a5105392dc5dd898d6410f4f1e26 SHA256: 1150b623a9d9e23a06f2f4c73e9e4afa78df0903ebbd768252eeb2fcaeeeed4d Section: libs Priority: optional Multi-Arch: same Homepage: https://osmocom.org/projects/libosmo-dsp Description: Osmocom Software Defined Radio Digital Signal Processing Library C-language library for common DSP (Digital Signal Processing) primitives for SDR (Software Defined Radio). They are part of the Osmocom (Open Source Mobile Communications) project. Package: libosmogb-doc Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 13750 Depends: osmocom-nightly (= 202601231800), libosmogb14, libjs-jquery Filename: ./all/libosmogb-doc_1.12.0.39.e2bf.202601231800_all.deb Size: 873664 MD5sum: 69580378c744937c79ce0467b0b10e22 SHA1: f8a9cb0887f0470ba601d337772768e3af694e36 SHA256: 100628e7a38c9cdbc5f999b0ef4218552ceea4c120c4bd38fddc6fe295f6c007 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo GPRS Gb library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmogb library. Package: libosmogb14 Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 449 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmogb14_1.12.0.39.e2bf.202601231800_armhf.deb Size: 159428 MD5sum: 5ef942a9ae9be9e4058733f7bdd0516b SHA1: 2e46160a23974977b802aadd0fa3686f10a9ea51 SHA256: ae02a23fd5242be6ea0c0b97c91b8aea02a01944bbde2ab530ff306fb6d909d9 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo GPRS GB library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmogb library in particular contains a GPRS BSSGP protocol implementation. Package: libosmogsm-doc Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 34995 Depends: osmocom-nightly (= 202601231800), libosmogsm20, libjs-jquery Filename: ./all/libosmogsm-doc_1.12.0.39.e2bf.202601231800_all.deb Size: 2146024 MD5sum: 11a3a21234f26e96c77209b202fe6f36 SHA1: 50a9f9a33230a3d9f04fe4fe8fa8a5b32b55b237 SHA256: 9235f90d4aab1c132bc2923e9f83915cf24123c14044896a9d93b98072bac7d9 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo GSM utility library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmogsm library. Package: libosmogsm20 Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 573 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libgnutls30t64 (>= 3.7.2), libosmocore22, libosmoisdn0, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmogsm20_1.12.0.39.e2bf.202601231800_armhf.deb Size: 198772 MD5sum: 498591c7a4206e3a359fc261398d02cb SHA1: bdee47612c40d7323ebc52ad5cde340083bf8f81 SHA256: 5cc185bf51318ed60ecffb8187d0922e2c5b06db708d01053d02e2ea60e47073 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo GSM utility library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmogsm library in particular is a collection of common code used in various GSM related sub-projects inside the Osmocom family of projects. It includes A5/1 and A5/2 ciphers, COMP128v1, a LAPDm implementation, a GSM TLV parser, SMS utility routines as well as protocol definitions for a series of protocols. Package: libosmoisdn-doc Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 3652 Depends: osmocom-nightly (= 202601231800), libosmoisdn0, libjs-jquery Filename: ./all/libosmoisdn-doc_1.12.0.39.e2bf.202601231800_all.deb Size: 374692 MD5sum: 6e367deda732def3400ffe4db6da1a1e SHA1: a2de0a5df667c2c2dd1e9cbbb6dea7513b1119c5 SHA256: ee997da3eefeef8f743d541a22dcaf74cc835db465dcf939b18c4712dd8abdaa Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo ISDN utility library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmoisdn library. Package: libosmoisdn0 Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 125 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmoisdn0_1.12.0.39.e2bf.202601231800_armhf.deb Size: 69096 MD5sum: 6837e95f59b802073237d7416869c5ce SHA1: 518733d88a7b2a3e23e20fe03acdcfe1473951da SHA256: e838350049c8eec6f96563c826f3aabac3ab10a207ea747823e633a5658af4c9 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo ISDN utility library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmoisdn library in particular is a collection of common code used in various ISDN related sub-projects inside the Osmocom family of projects. It includes an I.460 sub-channel multiplex and a generic LAPD core. Package: libosmonetif11 Source: libosmo-netif Version: 1.7.0.6.71a8.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 215 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmocore22, libosmogsm20, libosmovty13, libsctp1 (>= 1.0.10+dfsg), libtalloc2 (>= 2.0.4~git20101213) Conflicts: libosmonetif2 Filename: ./armhf/libosmonetif11_1.7.0.6.71a8.202601231800_armhf.deb Size: 62124 MD5sum: de55fea3bf3f1bee17de3b94a6ff9bf7 SHA1: 4021dfe84a1531e972c80a1207ea785dcd4fe8b3 SHA256: b2c0dcc857d92ff909c12f9444c472c689527700099c8c7abf33e6d6f776a38a Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-netif Description: Common/shared code regarding network interface for OpenBSC The libosmo-netif library is one of the libraries needed by the OpenBSC GSM infrastructure software. This library in particular implements the shared code for network interfaces. Package: libosmosim-doc Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 2225 Depends: osmocom-nightly (= 202601231800), libosmosim2, libjs-jquery Filename: ./all/libosmosim-doc_1.12.0.39.e2bf.202601231800_all.deb Size: 242264 MD5sum: 42869e091f41cd8c2e881b534cd5d033 SHA1: 77cbaebea3a6369168c65ac99eee9a4f45036f1b SHA256: fb4e6c07141a70fcafae0708d5a3925fba20d301a38f81393697de5b2448e8e9 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo SIM library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmosim library. Package: libosmosim2 Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 189 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmocore22, libosmogsm20, libpcsclite1 (>= 1.5.0), libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmosim2_1.12.0.39.e2bf.202601231800_armhf.deb Size: 61952 MD5sum: 44820246629d16f66b689e5735e3baf2 SHA1: 47dc7e21c1a16d38a00b505d8f644c28a41f4ea3 SHA256: 10c5e5edebe29f2f98f6f09b3d9e73cc92d16a124baca11559e7d61e64b35b84 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo SIM library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmosim library in particular contains routines for SIM card access. Package: libosmotrau11 Source: libosmo-abis Version: 2.1.0.8.c24d2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 181 Depends: osmocom-nightly (= 202601231800), libbctoolbox2 (>= 5.3.104), libbctoolbox2 (<< 5.4.0), libc6 (>= 2.4), libortp16 (>= 1:5.3.0), libortp16 (<< 1:5.4.0), libosmocodec4, libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/libosmotrau11_2.1.0.8.c24d2.202601231800_armhf.deb Size: 44208 MD5sum: 44b5869b42aab9e7b773a1f6ba627d9c SHA1: 06c82449129b696c1e2c9c1b0fec6ff45f5ffa33 SHA256: 642964c9aa83584c5fddb35a5b0e2d57497c29511ab25eca8a6ff6b25658ba19 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-abis Description: GSM trau handling This library implements the Transcoder and Rate Adaptation Unit (TRAU) for GSM systems. It is closely related to the libosmo-abis library. . TRAU performs transcoding function for speech channels and rate adaptation (RA) for data channels in the GSM network. Package: libosmousb-doc Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 1066 Depends: osmocom-nightly (= 202601231800), libosmousb0, libjs-jquery Filename: ./all/libosmousb-doc_1.12.0.39.e2bf.202601231800_all.deb Size: 185044 MD5sum: cd0fd84235d8a6af7b5b5d4021179eca SHA1: 5c1ebc90b8cf38abaf06c4c4ce321df1f42fb48b SHA256: 4f96af17950ca844f71c0ea69b68863cd0ec6feea4405b14927e03b01083b883 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo USB library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmousb library. Package: libosmousb0 Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 125 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libosmocore22, libtalloc2 (>= 2.1.0), libusb-1.0-0 (>= 2:1.0.20) Filename: ./armhf/libosmousb0_1.12.0.39.e2bf.202601231800_armhf.deb Size: 51252 MD5sum: 5ff4f019251a1855bdd5f629f3025037 SHA1: 8367c29b94a1db5653935203afd87b49be36f648 SHA256: 9ff505061eed620453a8ea3005ca4972e21fa120d82fa5341b4edc62e5124c48 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo USB library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmosub library in particular contains routines for USB device access via libusb-1.0, integrated into the libosmocore select event loop. Package: libosmovty-doc Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 7349 Depends: osmocom-nightly (= 202601231800), libosmovty13, libjs-jquery Filename: ./all/libosmovty-doc_1.12.0.39.e2bf.202601231800_all.deb Size: 643376 MD5sum: 00aedc7bbbc6934bea2438594742f0f7 SHA1: d89490186e6c53cd14252b6c6438820bc7cb3110 SHA256: bd837a8ee1c7db9a4ce516f5b068f0bdbd63068981b9928818188f3c2a5d9810 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmocore Description: Documentation for the Osmo VTY library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . This package contains the documentation for the libosmovty library. Package: libosmovty13 Source: libosmocore Version: 1.12.0.39.e2bf.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 259 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.38), libosmocore22, libtalloc2 (>= 2.1.0) Filename: ./armhf/libosmovty13_1.12.0.39.e2bf.202601231800_armhf.deb Size: 97788 MD5sum: 0176a21ba83205cd9018e30c6eef031a SHA1: b7eb01419d47389df0a1e23e6efe2cf18734f4f3 SHA256: 3e8dd963c3da3472946a7f134acd5d37dcbca932ab2886f13083d6d152f19326 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmocore Description: Osmo VTY library This is part of the libosmocore "meta"-library. The libosmocore library contains various utility functions that were originally developed as part of the OpenBSC project, but which are of a more generic nature and thus useful to (at least) other programs that are developed in the sphere of Free Software / Open Source mobile communication. . The libosmovty library in particular implements the interactive command-line on the VTY (Virtual TTY) as well as configuration file parsing. Package: librtlsdr-dev Source: rtl-sdr Version: 2.0.2.2.ae0d.202601231800 Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 119 Depends: osmocom-nightly (= 202601231800), librtlsdr0 (= 2.0.2.2.ae0d.202601231800), libusb-1.0-0-dev Filename: ./armhf/librtlsdr-dev_2.0.2.2.ae0d.202601231800_armhf.deb Size: 31672 MD5sum: acc99ba144cc2ebe7c9c562281dbe50c SHA1: 2a0783dc26fc618c942135bf167ed35564814a66 SHA256: 62641a64c81f60aeb839d571fd04a91cac83bc07b45c3dd40077e8b6eeb73140 Section: libdevel Priority: optional Homepage: http://sdr.osmocom.org/trac/wiki/rtl-sdr Description: Software defined radio receiver for Realtek RTL2832U (development) rtl-sdr is a software defined radio (SDR) receiver software for certain low-cost DVB-T/DAB(+) USB dongles based on the Realtek RTL2832U chip. . This package contains development files. Package: librtlsdr0 Source: rtl-sdr Version: 2.0.2.2.ae0d.202601231800 Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 108 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4), libusb-1.0-0 (>= 2:1.0.21) Filename: ./armhf/librtlsdr0_2.0.2.2.ae0d.202601231800_armhf.deb Size: 26284 MD5sum: bf207c9dd39272355a150f3d573e5c33 SHA1: 6ba24b406eedea05f4efe56cc597c9d58c0a7ad5 SHA256: 989c43351cdc56d6e46bf4dfde6f504e38ecd64a8124ed9324fe9c5c4731558c Section: libs Priority: optional Multi-Arch: same Homepage: http://sdr.osmocom.org/trac/wiki/rtl-sdr Description: Software defined radio receiver for Realtek RTL2832U (library) rtl-sdr is a software defined radio (SDR) receiver software for certain low-cost DVB-T/DAB(+) USB dongles based on the Realtek RTL2832U chip. . This package contains the shared library. Package: librtlsdr0-dbgsym Source: rtl-sdr Version: 2.0.2.2.ae0d.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 109 Depends: librtlsdr0 (= 2.0.2.2.ae0d.202601231800) Filename: ./armhf/librtlsdr0-dbgsym_2.0.2.2.ae0d.202601231800_armhf.deb Size: 91656 MD5sum: 42e748e928350c982fd7c2fff7f62da7 SHA1: 5eb50ff8f61e75a76aaf15eced99e8e556a29010 SHA256: d478463709782802ffcd2a8b5235d3c7e6913952f1afc21801f65fd555282058 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for librtlsdr0 Build-Ids: 54550a830377e1af97dbc8e887afb7af81f4f3cb Package: libsmpp1 Source: libsmpp34 Version: 1.14.5.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 401 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.4) Filename: ./armhf/libsmpp1_1.14.5.202601231800_armhf.deb Size: 88680 MD5sum: 24fa146827c4dacc5daf6a246fdfeca9 SHA1: 02c1cc596443f244eff822c548a75472ebc592bc SHA256: 2ea2c6614cf232cb52e76379a698b0f8277abd0ba8bd2eb7e83f339de3c8b315 Section: libs Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libsmpp34 Description: Open PDU SMPP packaging and unpackaging tool This library is an implementation for providing the PDU handling of the SMPP-3.4 protocol. SMPP (Short Message Peer-to-Peer) is an open industry standard protocol designed to provide a flexible data communication interface for the transfer of short message data between External Short Messaging Entities, Routing Entitites and Message Centres. Package: libsmpp34-dbg Source: libsmpp34 Version: 1.14.5.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 527 Depends: osmocom-nightly (= 202601231800), libsmpp1 (= 1.14.5.202601231800) Filename: ./armhf/libsmpp34-dbg_1.14.5.202601231800_armhf.deb Size: 517620 MD5sum: 0db9f991c47bd1d7033d7feded555bf3 SHA1: 7ff768b4e57e2b13865746f922dc563df5449844 SHA256: 1031752d242632f57abbbfab7b04a6104b3692a004b0988b8a26a6b971c635c0 Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/libsmpp34 Description: Debug symbols for libsmpp34 Build-Ids: 9a6ba8f6a4d63a53a5c5cbec72d0155880536ada Package: libsmpp34-dev Source: libsmpp34 Version: 1.14.5.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 452 Depends: osmocom-nightly (= 202601231800), libsmpp1 (= 1.14.5.202601231800) Filename: ./armhf/libsmpp34-dev_1.14.5.202601231800_armhf.deb Size: 73644 MD5sum: d190cd06bc5ca1d300c43ab32bf2f03d SHA1: c236a397591ab6a6cc55a3568f28427c6c4c3913 SHA256: 646dd39089d145710eea75a6822c1ab2559f9a06e2899fa85d0060c989ef77b3 Section: libdevel Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libsmpp34 Description: Development files for libsmpp34 This library is an implementation for providing the PDU handling of the SMPP-3.4 protocol. SMPP (Short Message Peer-to-Peer) is an open industry standard protocol designed to provide a flexible data communication interface for the transfer of short message data between External Short Messaging Entities, Routing Entitites and Message Centres. . This package contains the development files for the library. Package: libsmpp34-utils Source: libsmpp34 Version: 1.14.5.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 10 Depends: osmocom-nightly (= 202601231800) Filename: ./armhf/libsmpp34-utils_1.14.5.202601231800_armhf.deb Size: 2928 MD5sum: 7312065cfe28c4d90d165de00d911085 SHA1: 9b9d0ad9c0491e8d78a104208704a4f364502973 SHA256: d7b94679d264cbe99e4f03bd360424079c8b195da5f4f56976c459196cebd13e Section: libs Priority: optional Homepage: https://projects.osmocom.org/projects/libsmpp34 Description: Utilities for SMPP Package: libstrongswan Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2631 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.38), libcap2 (>= 1:2.10), libgmp10 (>= 2:6.3.0+dfsg), libsystemd0 (>= 227) Recommends: libstrongswan-standard-plugins Suggests: libstrongswan-extra-plugins Filename: ./armhf/libstrongswan_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 365280 MD5sum: 0b2ea295da57c9fda54eeaaf37d0bb65 SHA1: e1eb5cb0d43371a5a8569160dbd0ea0a00cf6c2e SHA256: f6960a6294b766ab4309f94b014d5b6196133d3e28590a57445020ac47b1583e Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan utility and crypto library The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides the underlying libraries of charon and other strongSwan components. It is built in a modular way and is extendable through various plugins. . Some default (as specified by the strongSwan projet) plugins are included. For libstrongswan (cryptographic backends, URI fetchers and database layers): - aes (AES-128/192/256 cipher software implementation) - constraints (X.509 certificate advanced constraint checking) - dnskey (Parse RFC 4034 public keys) - drbg (NIST SP-800-90A Deterministic Random Bit Generator) - fips-prf (PRF specified by FIPS, used by EAP-SIM/AKA algorithms) - gmp (RSA/DH crypto backend based on libgmp) - hmac (HMAC wrapper using various hashers) - md5 (MD5 hasher software implementation) - mgf1 (Mask Generation Functions based on the SHA-1, SHA-256 and SHA-512) - nonce (Default nonce generation plugin) - pem (PEM encoding/decoding routines) - pgp (PGP encoding/decoding routines) - pkcs1 (PKCS#1 encoding/decoding routines) - pkcs8 (PKCS#8 decoding routines) - pkcs12 (PKCS#12 decoding routines) - pubkey (Wrapper to handle raw public keys as trusted certificates) - random (RNG reading from /dev/[u]random) - rc2 (RC2 cipher software implementation) - revocation (X.509 CRL/OCSP revocation checking) - sha1 (SHA1 hasher software implementation) - sha2 (SHA256/SHA384/SHA512 hasher software implementation) - sshkey (SSH key decoding routines) - x509 (Advanced X.509 plugin for parsing/generating X.509 certificates/CRLs and OCSP messages) - xcbc (XCBC wrapper using various ciphers) - attr (Provides IKE attributes configured in strongswan.conf) - kernel-netlink [linux] (IPsec/Networking kernel interface using Linux Netlink) - kernel-pfkey [kfreebsd] (IPsec kernel interface using PF_KEY) - kernel-pfroute [kfreebsd] (Networking kernel interface using PF_ROUTE) - resolve (Writes name servers received via IKE to a resolv.conf file or installs them via resolvconf(8)) Package: libstrongswan-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 1628 Depends: libstrongswan (= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/libstrongswan-dbgsym_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 1411524 MD5sum: 1c9a20b6c1db708b336ea5198a83121b SHA1: 1af6755950211247d29e9ab97a167d16605a5d6a SHA256: 0225b2ac67e41cbaba3827a9214e75e715cc8aea7726a76890ae5eeb47b2584a Section: debug Priority: optional Description: debug symbols for libstrongswan Build-Ids: 06f97e0598992644fda2578b32e60a2bcc093228 08ed3744a26823d512502f647c7a0b7e74b2fe3f 0f1f366fc6761e76c88187076ddd8e8027120407 112a32389a6e390177e84ee675faa14ffd62951a 25bb583efdb6c3cfb239071e78ba8538272a497e 2ef7a0f67268c7ad50c3b3e1f3ad60ce0f55c4f5 3212556a30683e301b988d907f3fae7e7c2b6320 34973e48b3bb1e6efb0acd42622aa004ce37649c 3e15465712d5f2a7698a5c6f1b4dfe1c865b4429 42ad2e06f63f8c69a8119fccbd1980eaf3543d8c 42f03eeafbf3d3a30a922e0678c6e6aa5a9217f9 45fb19b30039dffdafb52e548c782ba748082e57 4aa5cbea3faebfd191f20925aef5f33cd5fc783f 6b5276b661c7c1afa36219255d323ac3596d5fcf 73b7a9efb377a7ccb8586b58546d26770c862dbd 9794d870cad556c721d2a272d8edc39e0e4ee3ed 9fdd3f552c4175b895cfcfc964d9f4ea2b37ea7b b876ce1b4e60a15848f9551c18d1636bdfc741ee c349e7b39f7744fb6bb7f9bb95b3d4ecb293d039 c470d3f1a96d7642a27fa059e220f03a950cf972 c49b365ff40efffe8a717b395ef19692916401c5 c783a1911e53edd098fa61299b856b83d6681398 d2cb7b64897c2578d9d841a59aad87133fe2acbf dabdeb6ea0128362314ea5b96eef750b7acdfd4c e15c7441b9a1a7fcf6d3b0bed8c478ec7beb5e20 ecd622f5db659b51fdc6d8bbca43e14ff0e6a622 eef754fbbba0411618d82fbec96342a52add6fcc f65365e9d6ac4ca07342e5c28ea1d6380faabaa1 fd9a50b7338b149a4bfb4389408f2e059f56d9ef Package: libstrongswan-extra-plugins Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1260 Depends: osmocom-nightly (= 202601231800), libstrongswan (= 2:0.1.2.osmo.epdg.202601231800), libc6 (>= 2.34), libcurl4t64 (>= 7.16.2), libgcrypt20 (>= 1.11.0), libgpg-error0 (>= 1.14), libldap2 (>= 2.6.2), libtss2-sys1t64 (>= 3.0.1) Breaks: libcharon-extra-plugins (<= 5.5.3-1) Replaces: libcharon-extra-plugins (<= 5.5.3-1) Filename: ./armhf/libstrongswan-extra-plugins_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 240128 MD5sum: 3aa4eeb3e87b91c5b1a439005ba1c4ac SHA1: 1bd1c5f4c8454b83466803442ef33741fa62a771 SHA256: 932f410e216a81915aac5ca36b77ba191349653d14f7535f1e3dac3d4f113c71 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan utility and crypto library (extra plugins) The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides extra plugins for the strongSwan utility and cryptographic library. . Included plugins are: - af-alg [linux] (AF_ALG Linux crypto API interface, provides ciphers/hashers/hmac/xcbc) - ccm (CCM cipher mode wrapper) - cmac (CMAC cipher mode wrapper) - ctr (CTR cipher mode wrapper) - curl (libcurl based HTTP/FTP fetcher) - curve25519 (support for Diffie-Hellman group 31 using Curve25519 and support for the Ed25519 digital signature algorithm for IKEv2) - gcrypt (Crypto backend based on libgcrypt, provides RSA/DH/ciphers/hashers/rng) - ldap (LDAP fetching plugin based on libldap) - padlock (VIA padlock crypto backend, provides AES128/SHA1) - pkcs11 (PKCS#11 smartcard backend) - rdrand (High quality / high performance random source using the Intel rdrand instruction found on Ivy Bridge processors) - test-vectors (Set of test vectors for various algorithms) . Also included is the libtpmtss library adding support for TPM plugin (https://wiki.strongswan.org/projects/strongswan/wiki/TpmPlugin) Package: libstrongswan-extra-plugins-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 640 Depends: libstrongswan-extra-plugins (= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/libstrongswan-extra-plugins-dbgsym_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 525580 MD5sum: 90d40fb8a219512665a8361f6538c3e9 SHA1: 5143fc960f153f506918b60a79c5c7d210642205 SHA256: 36c1b64fd40b9e27b160c99314d2171c253fcc583b34d4667f53251892571e51 Section: debug Priority: optional Description: debug symbols for libstrongswan-extra-plugins Build-Ids: 47d5be67628880065a14c8f480c07e088a539669 76136b5ad819b0ff2bced592d54844b8ee371ae2 78adb4c8e65d6372d25dc2cdb76a9e468d22ea30 8f9def1cd80c3321e16d87a686cc7db7a119b6b2 90865d32cb2eb3b949f4854204cc54b75e88e721 a01a6f3a59dd67c3e88114a56f7615bd4d1afc32 adceb4cfdaa4f53a91896ebf2684eda82d1d5031 ae165493d9be40f7c30d65415d04743355b8f024 c1ab72e4987467d85eb6fd92e5d7049fa6e67b6b cadf6eef63fe7829eeb96829ffdc9f48a4178970 d1c906967c1821270e7337ac80d89e5488b7486e dd34029d97c70e0d3288e97102993eed9a0b2cd6 e2d381917e5dbeb31ff31b55a198c43011690589 e63a9aa3233635bcc9b9dd8512fbf229d43d3316 Package: libstrongswan-standard-plugins Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 491 Depends: osmocom-nightly (= 202601231800), libstrongswan (= 2:0.1.2.osmo.epdg.202601231800), libc6 (>= 2.34), libip4tc2 (>= 1.8.3), libssl3t64 (>= 3.0.0) Filename: ./armhf/libstrongswan-standard-plugins_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 107756 MD5sum: 65750c5e933ab270df7f6d85fe1d2fc6 SHA1: e50cee0a1e4503059baaf00423a5243e405f95aa SHA256: d7d3913182c8649ec06ae238c68fcef7d5719c0a35094d529d2c75445b0ce7fc Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan utility and crypto library (standard plugins) The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package provides some common plugins for the strongSwan utility and cryptograhic library. . Included plugins are: - agent (RSA/ECDSA private key backend connecting to SSH-Agent) - gcm (GCM cipher mode wrapper) - openssl (Crypto backend based on OpenSSL, provides RSA/ECDSA/DH/ECDH/ciphers/hashers/HMAC/X.509/CRL/RNG) Package: libstrongswan-standard-plugins-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 297 Depends: libstrongswan-standard-plugins (= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/libstrongswan-standard-plugins-dbgsym_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 250496 MD5sum: 9a82233189d8469bae567de80a724f34 SHA1: 51a75806de6283050eee0fcc1e69a76af997e4c9 SHA256: e9bef69e903ddabf34c730d5c33aaca278efb08d92bda84246e489316ea97a06 Section: debug Priority: optional Description: debug symbols for libstrongswan-standard-plugins Build-Ids: 7c8f9d866c48bb2114d473850e646abca538dd15 7ea010ba6f7d0a3acc5e1d72264cfd08ebef6b73 d57d6f9dabf4e9f31d53744e80f01614d2ce775e d875e39036497b0130092a70e3cac5c80dfec4eb Package: libusrp-dev Source: libusrp Version: 3.4.11.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 162 Depends: osmocom-nightly (= 202601231800), libusrp1 (= 3.4.11.202601231800), libusb-1.0-0-dev Filename: ./armhf/libusrp-dev_3.4.11.202601231800_armhf.deb Size: 25644 MD5sum: 61606f89ca603465f27e2a5fac25ab22 SHA1: 9c804c1d0ee4ae191719fa37ab421d7f6bec2352 SHA256: 5c11c853b1833acae61d03a2b02f0c46d0240460f99cd9fcfd7d346ae35ff848 Section: libdevel Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: gnuradio based driver library for the USRP1 SDR - dev files Package: libusrp-doc Source: libusrp Version: 3.4.11.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 327 Depends: osmocom-nightly (= 202601231800), libusrp1 (= 3.4.11.202601231800), libjs-jquery Filename: ./all/libusrp-doc_3.4.11.202601231800_all.deb Size: 81788 MD5sum: 2efd1a93b03ceab1d45c4b566f5c2530 SHA1: 1bfab74ed4ed8f9a1717f835b0448480d455b055 SHA256: 401ea3c58d692dfb7212ce53d89b81390681db08e535be81ea1fb7e7e10b645b Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: Documentation for gnuradio based driver library for the USRP1 SDR Package: libusrp-firmware Source: libusrp Version: 3.4.11.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1799 Depends: osmocom-nightly (= 202601231800), libusrp1 (= 3.4.11.202601231800) Filename: ./armhf/libusrp-firmware_3.4.11.202601231800_armhf.deb Size: 741260 MD5sum: 3a87ae5bff8c8a619c45e751dc4bcd06 SHA1: 60ff2302f32a1d2d0d4aff62426d5cedefb5c5a5 SHA256: 219887f77f9398730a54e68290637792fd0f1b0918c5d4ba5089237427b752fe Section: libs Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: gnuradio based driver library for the USRP1 SDR - firmware files Package: libusrp-utils Source: libusrp Version: 3.4.11.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 143 Depends: osmocom-nightly (= 202601231800), libusrp1 (= 3.4.11.202601231800) Filename: ./armhf/libusrp-utils_3.4.11.202601231800_armhf.deb Size: 10916 MD5sum: d0b1d395430a6c6be77bca473f8803fa SHA1: 83e71b7028d029a5c540e4917c3a6faf98c098c2 SHA256: ae2ea7f19484d67a6704661e22a6308516d42e5f22b286229b486843e30d9eaa Section: libs Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: gnuradio based driver library for the USRP1 SDR - several tools Package: libusrp-utils-dbgsym Source: libusrp Version: 3.4.11.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 104 Depends: libusrp-utils (= 3.4.11.202601231800) Filename: ./armhf/libusrp-utils-dbgsym_3.4.11.202601231800_armhf.deb Size: 66296 MD5sum: f0b14a32422a57361cf52e537df7f56e SHA1: 60b6fc2317d81421e1949632a4cc6017ad5ca86b SHA256: d65bb94b2b56adc09a147cd2a189dcf2745fbc543855caa7cf5c5d9f1f44639a Section: debug Priority: optional Description: debug symbols for libusrp-utils Build-Ids: 72802a1c267bdf8df3b7abed70c0a7dcf257b677 b1855ebd4e2cc4c1054ba700e13827e2d518a350 Package: libusrp1 Source: libusrp Version: 3.4.11.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 465 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.38), libgcc-s1 (>= 3.5), libstdc++6 (>= 11), libusb-1.0-0 (>= 2:1.0.8) Filename: ./armhf/libusrp1_3.4.11.202601231800_armhf.deb Size: 102128 MD5sum: 28ea03646da09f6aa69aa25b534f49f1 SHA1: 24a30a25215fac2809af125cda3723c4b38ac7ae SHA256: 34852ae5c740636888aed8b365d57594966060161933e0c6a537ecc282fd4e3b Section: libs Priority: optional Homepage: https://osmocom.org/projects/osmotrx/ Description: gnuradio based driver library for the USRP1 SDR Gnuradio removed libusrp as it switched to UHD support, including USRP1 devices. However, USRP1 on UHD doesn't support timestamps, so this library remains needed for applications that use timestamps such as osmo-trx. To find out how this library was forked from gnuradio, check libusrp.git commit description ec6adccbbdda1a4614089aaf52f9e1bab75494e7. Package: libusrp1-dbgsym Source: libusrp Version: 3.4.11.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 1252 Depends: libusrp1 (= 3.4.11.202601231800) Filename: ./armhf/libusrp1-dbgsym_3.4.11.202601231800_armhf.deb Size: 1125200 MD5sum: 700c969a7aa2e6ccb88c62d9d4022df1 SHA1: 21ac80d67c2581eac89e45d6307f47ad2bc019cf SHA256: 06391af525df1f46b3e8b6f734e7d0875cb6d26f18066590424c4057742b158f Section: debug Priority: optional Description: debug symbols for libusrp1 Build-Ids: 072bc51502418cb632398abdaeee611c4cb5854c Package: neocon Version: 1.0.2.12.36dc.202601231800 Architecture: armhf Maintainer: Harald Welte Installed-Size: 75 Depends: libc6 (>= 2.34) Filename: ./armhf/neocon_1.0.2.12.36dc.202601231800_armhf.deb Size: 6012 MD5sum: 66b2651016c6f738a1a6acb5bc50d989 SHA1: 7d9b04cbfdc76d56a6186ef1826685aea2590517 SHA256: 5f652b3d88a7e64c18fc115586915d241ef9ec479c582a03fce0664ea15eefab Section: net Priority: extra Multi-Arch: same Homepage: https://github.com/openmoko/neocon Description: Simple serial console utility with re-open-after-disconnect Package: neocon-dbgsym Source: neocon Version: 1.0.2.12.36dc.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Harald Welte Installed-Size: 29 Depends: neocon (= 1.0.2.12.36dc.202601231800) Filename: ./armhf/neocon-dbgsym_1.0.2.12.36dc.202601231800_armhf.deb Size: 7300 MD5sum: 4f3760e8271a23362d0281c8ee82a962 SHA1: cbc21024f984f5e5aa22a5f254bbf74a82302fc7 SHA256: db7774ba83249bd1134609bce916219467cb011f9f95a57ef12242bebba5ea6f Section: debug Priority: optional Multi-Arch: same Description: debug symbols for neocon Build-Ids: cb6fff58c89e08d0c70c40d69b5d32143535c04b Package: osmo-bsc Version: 1.14.0.6.37929.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1733 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmo-mgcp-client14, libosmo-sigtran12, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-mgw Filename: ./armhf/osmo-bsc_1.14.0.6.37929.202601231800_armhf.deb Size: 541432 MD5sum: 301d77dffb066acf476109165efb4119 SHA1: efaee5adfa732dd8a7fe052ddfff89805a4eb2a1 SHA256: 385b90113177c7e01bdc1ade6060c0979cac573dc76b7637f988b8b246ebea78 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: OsmoBSC: Osmocom's Base Station Controller for 2G circuit-switched mobile networks Package: osmo-bsc-bs11-utils Source: osmo-bsc Version: 1.14.0.6.37929.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 8122 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmo-mgcp-client14, libosmo-sigtran12, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bsc-bs11-utils_1.14.0.6.37929.202601231800_armhf.deb Size: 2282604 MD5sum: 106ee8c53ab3ffd03c51787742f1a2c7 SHA1: 103b20390d9d64d7d94d44ba0e1c4513d1d483fe SHA256: 0bc6cb0b77e341124905377248c94b26525d61c8792686bc13deef34802453e3 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: Command line utilities for Siemens BS-11 BTS There is a tool in this package for configuring the Siemens BS-11 BTS. Additionally, it contains one tool for making use of an ISDN-card and the public telephone network as frequency standard for the E1 line. Package: osmo-bsc-dbg Source: osmo-bsc Version: 1.14.0.6.37929.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 4894 Depends: osmocom-nightly (= 202601231800), osmo-bsc (= 1.14.0.6.37929.202601231800) Filename: ./armhf/osmo-bsc-dbg_1.14.0.6.37929.202601231800_armhf.deb Size: 3261512 MD5sum: 59ff524d2110cc4631e954c23559f642 SHA1: 83c3afd5190de6fd137797fb74c94e1a09ae41c1 SHA256: 806fbcfc2cc9c28d89aae95b651762a9e4c75d62ab745bb7290b514951229a21 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: OsmoBSC: Osmocom's Base Station Controller for 2G circuit-switched mobile networks Build-Ids: ce9e08f4acb411512028d6bf38ab268b5183efc7 Package: osmo-bsc-doc Source: osmo-bsc Version: 1.14.0.6.37929.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 2398 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-bsc-doc_1.14.0.6.37929.202601231800_all.deb Size: 2255892 MD5sum: 9027befaae5605698deda45064d55e40 SHA1: 8483b4e5127124097f1baec0137b91c8b94432b5 SHA256: 2b8aa4dfa15f52f66f37d7c99115df550686dda735e4c77f6660c7a8d68b4ce7 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-bsc-ipaccess-utils Source: osmo-bsc Version: 1.14.0.6.37929.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 15971 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmo-mgcp-client14, libosmo-sigtran12, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bsc-ipaccess-utils_1.14.0.6.37929.202601231800_armhf.deb Size: 3385060 MD5sum: f2d52ff628efabeb3cf05ed78b5c1c02 SHA1: 35411dfd0f7f75f85539fe7df3aa993ed1571545 SHA256: 921468fd7177c39473f06c62cabea7c0846b9fd74813f7c85ba1276edb206a11 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: Command line utilities for ip.access nanoBTS This package contains utilities that are specific for nanoBTS when being used together with OpenBSC. It contains mainly two tools: ipaccess-config and ipaccess-proxy. Package: osmo-bsc-meas-utils Source: osmo-bsc Version: 1.14.0.6.37929.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 8010 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libcdk5t64 (>= 5.0.20190303), libncurses6 (>= 6), libosmo-mgcp-client14, libosmo-sigtran12, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213), libtinfo6 (>= 6) Filename: ./armhf/osmo-bsc-meas-utils_1.14.0.6.37929.202601231800_armhf.deb Size: 2258824 MD5sum: e027c6dfb9983db577541c10dca2ebd7 SHA1: e7a0ce60cfb78fb9b5c97a36a7620ab216b95450 SHA256: 6c7d799c06bbe649d8d7db887790ccc6082138f35050b38697d74eed8c4bde9e Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc Description: Command line utilities to manage measurement reports. Package: osmo-bsc-nat Version: 0.1.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 90 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmo-mgcp-client14, libosmo-sigtran12, libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bsc-nat_0.1.0.202601231800_armhf.deb Size: 18896 MD5sum: 23ecb6e8dc9a83f226bff18536e0bab3 SHA1: 170fd175a4412fee3f68203522c67cb7b018291f SHA256: feb42e051259ac03b7efa71194ea8ad4ec2fd58e08bc7bb3c7f7f9c728b8b4a1 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-bsc-nat Description: OsmoBSCNAT masquerades multiple BSCs behind one Package: osmo-bsc-nat-dbg Source: osmo-bsc-nat Version: 0.1.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 147 Depends: osmocom-nightly (= 202601231800), osmo-bsc-nat (= 0.1.0.202601231800) Filename: ./armhf/osmo-bsc-nat-dbg_0.1.0.202601231800_armhf.deb Size: 86340 MD5sum: 170b267b7dec55bad0fb7432315fc1e2 SHA1: af1287721e3fc0bcf0aeb3cf1711815b8e1efa4e SHA256: e429aef34cf081e2ff543ac74845fe7674e12ab49f0f9705c68e46283843d0c3 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-bsc-nat Description: OsmoBSCNAT masquerades multiple BSCs behind one Build-Ids: cd8d3f70e71cce379533936f7c4faf9ef44618f6 Package: osmo-bsc-nat-doc Source: osmo-bsc-nat Version: 0.1.0.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 8 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-bsc-nat-doc_0.1.0.202601231800_all.deb Size: 1912 MD5sum: c252ee92590b3f05743697484cd017a0 SHA1: a9fdc797b125dfb5f715a3a27e9046f261eee6fa SHA256: 895f442f843699c9fdc7569f06a1a26cf79d80d8040ad97ce84e6c5832014a8b Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-bsc-nat Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-bts Version: 1.10.0.29.1dfb.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 41 Depends: osmocom-nightly (= 202601231800), osmo-bts-trx, osmo-bts-virtual Filename: ./armhf/osmo-bts_1.10.0.29.1dfb.202601231800_armhf.deb Size: 33972 MD5sum: 8f3f9f4357b788799aef3dd3ce477198 SHA1: 769ea280aa3c18b38ffcd4b863c2c568310e52b5 SHA256: af706dd86959cc1bc606258ddf097bbfc0b4f760ecf7ea3bef534f911012657e Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmobts Description: Base Transceiver Station for GSM OsmoBTS is a software implementation of Layer2/3 of a BTS. It implements the following protocols/interfaces: LAPDm (GSM 04.06) RTP A-bis/IP in IPA multiplex OML (GSM TS 12.21) RSL (GSM TS 08.58) . OsmoBTS is modular and has support for multiple back-ends. A back-end talks to a specific L1/PHY implementation of the respective BTS hardware. Based on this architecture, it should be relatively easy to add a new back-end to support so-far unsupported GSM PHY/L1 and associated hardware. Package: osmo-bts-doc Source: osmo-bts Version: 1.10.0.29.1dfb.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 1913 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-bts-doc_1.10.0.29.1dfb.202601231800_all.deb Size: 1769944 MD5sum: 40377e764a9dba0c40089ee2483a4430 SHA1: 76bd218421fa95cd229f00126ab45e264f266fc2 SHA256: 2e60f0b5618a155bf8d6917bef698e07b5120558481df6e3bc8138a4dd4a9399 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmobts Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-bts-trx Source: osmo-bts Version: 1.10.0.29.1dfb.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 581 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmoabis15, libosmocodec4, libosmocoding0, libosmocore22, libosmoctrl0, libosmogsm20, libosmoisdn0, libosmonetif11, libosmotrau11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bts-trx_1.10.0.29.1dfb.202601231800_armhf.deb Size: 202704 MD5sum: c186a48aa3d5547067649c681ab47a01 SHA1: d5d06840f5f8a53e60237bc9e971f6340de40027 SHA256: c89d93f70cf464f969bc271d15231c3e498a10225793127d82f0675fcac1b528 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmobts Description: osmo-bts-trx GSM BTS with osmo-trx osmo-bts-trx to be used with the osmo-trx application Package: osmo-bts-trx-dbg Source: osmo-bts Version: 1.10.0.29.1dfb.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1768 Depends: osmocom-nightly (= 202601231800), osmo-bts-trx (= 1.10.0.29.1dfb.202601231800) Filename: ./armhf/osmo-bts-trx-dbg_1.10.0.29.1dfb.202601231800_armhf.deb Size: 1244932 MD5sum: 0c58a3e7d313261e9fc4649dd305eb5c SHA1: 64b53a1770bd6dad5d592dedef9bfe94db98d96a SHA256: 0ab2a1efbc08090e664f5942c0475f1f68282f5ccf1bc9472ac221fd6ca8beeb Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmobts Description: Debug symbols for the osmo-bts-trx Make debugging possible Build-Ids: c786f6bf55b4a42da3dd1ffd5fddd39bee625848 Package: osmo-bts-virtual Source: osmo-bts Version: 1.10.0.29.1dfb.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 841 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmoabis15, libosmocodec4, libosmocore22, libosmoctrl0, libosmogsm20, libosmoisdn0, libosmonetif11, libosmotrau11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-bts-virtual_1.10.0.29.1dfb.202601231800_armhf.deb Size: 200752 MD5sum: a59133f9ed84762a666cb74aee5fa33b SHA1: c6823ce046a0b56fbf5cbc90bd636debeb54a913 SHA256: fcb489ecbab730b088ff3001d1ab631a1dcceb07ad9cb56e3a00ff575607dd63 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmobts Description: Virtual Osmocom GSM BTS (no RF hardware; GSMTAP/UDP) This version of OsmoBTS doesn't use actual GSM PHY/Hardware/RF, but utilizes GSMTAP-over-UDP frames for the Um interface. This is useful in fully virtualized setups e.g. in combination with OsmocomBB virt_phy. Package: osmo-bts-virtual-dbg Source: osmo-bts Version: 1.10.0.29.1dfb.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2772 Depends: osmocom-nightly (= 202601231800), osmo-bts-virtual (= 1.10.0.29.1dfb.202601231800) Filename: ./armhf/osmo-bts-virtual-dbg_1.10.0.29.1dfb.202601231800_armhf.deb Size: 1970044 MD5sum: 89eee14331d14712bc3558102a3ffa79 SHA1: 98b89087248f36a177a9ba7996ca4b512f0dbea3 SHA256: 7d9a353f315fd982bf1c325d01a703b9b955522c0de01d424e4efce7c61c2c2e Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmobts Description: Debug symbols for the osmo-bts-virtual Make debugging possible Build-Ids: 31c39c53e98daa90b6c0b2614a3809d4b8d0664f e6c5845a9ad5e82909ea3f2c84074a0a24511d74 Package: osmo-cbc Version: 0.5.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 160 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libjansson4 (>= 2.14), libosmo-sbcap2, libosmocore22, libosmogsm20, libosmonetif11, libosmovty13, libsctp1 (>= 1.0.10+dfsg), libtalloc2 (>= 2.0.4~git20101213), libulfius2.7t64 (>= 2.7.0) Filename: ./armhf/osmo-cbc_0.5.2.202601231800_armhf.deb Size: 38984 MD5sum: 46eb3ba05884a640ebc73ddc045716ed SHA1: df78ce493ef9e73a615c23b2f8a1ce207e7c60eb SHA256: 47a5616c8a62e8073db742089cda3de81da8df57c566e84a56c61d4078f4b6f6 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: OsmoCBC: Osmocom's Cell Broadcast Center Package: osmo-cbc-dbg Source: osmo-cbc Version: 0.5.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 328 Depends: osmocom-nightly (= 202601231800), osmo-cbc (= 0.5.2.202601231800) Filename: ./armhf/osmo-cbc-dbg_0.5.2.202601231800_armhf.deb Size: 216476 MD5sum: d5333ba4b4bccf6d94b27abc110b500d SHA1: ceb0035a537ff73c3da0aefdee1ea1b661611da6 SHA256: d60ea26023e2468d524e33bf8a4f54d63ba514d9c4dbe20be78e6918056629fc Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: OsmoCBC: Osmocom's Cell Broadcast Center Build-Ids: 73cd422317efe97e568660a848feb24f9d3ea736 Package: osmo-cbc-doc Source: osmo-cbc Version: 0.5.2.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 650 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-cbc-doc_0.5.2.202601231800_all.deb Size: 627132 MD5sum: 462fd61567f8d378549ad3a777be1a8b SHA1: 5b22e906c281b171dfd71d8506abaa72fb6b2136 SHA256: 7592bae39f8c31fe48b28e915c1cf364f29bc8d209e85278730bb41757363fc6 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-cbc-utils Source: osmo-cbc Version: 0.5.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 18 Depends: osmocom-nightly (= 202601231800), python3 Filename: ./armhf/osmo-cbc-utils_0.5.2.202601231800_armhf.deb Size: 7012 MD5sum: 2ec468fd84e8a8287620386002c15684 SHA1: f5c43793f4624395e03c4f2b106f1dcb3254a5eb SHA256: 64f4bdf4ef6ac1a4e6c221c21c99b0575b9df2dcba2dc7b66ab46aeae8998451 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-cbc Description: Utilities for OsmoCBC: Osmocom's Cell Broadcast Center Package: osmo-e1d Version: 0.7.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 93 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.38), libosmo-e1d3, libosmo-octoi3, libosmocore22, libosmousb0, libosmovty13, libtalloc2 (>= 2.0.4~git20101213), libusb-1.0-0 (>= 2:1.0.16) Filename: ./armhf/osmo-e1d_0.7.2.202601231800_armhf.deb Size: 30760 MD5sum: 4a695c3bbd5ace6225653975a2117183 SHA1: 00e5939927c77f5a83787ace4fbd5ec9c63acc4d SHA256: d9e1198374215c4f8cff6520ffa936a9a969c7c3bced8c96f801700becb4a38a Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-e1d Description: osmo-e1d: Osmocom's E1 interface daemon Package: osmo-e1d-dbgsym Source: osmo-e1d Version: 0.7.2.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 168 Depends: osmo-e1d (= 0.7.2.202601231800) Filename: ./armhf/osmo-e1d-dbgsym_0.7.2.202601231800_armhf.deb Size: 96228 MD5sum: 7e6d7ea3b8afa3071bdb62f5f16f4fc1 SHA1: ff8251c9e164a905b37525c6a0e28b2b52f7126f SHA256: c4d1fa44529031132e90e03b51e08239283108a8a203a22c8ed147ee3e83581a Section: debug Priority: optional Description: debug symbols for osmo-e1d Build-Ids: 1e864dcbd5221a423e949fbdf9123861ccddeeed Package: osmo-fl2k Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 283 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmo-fl2k0 Filename: ./armhf/osmo-fl2k_0.2.1.202601231800_armhf.deb Size: 18016 MD5sum: 109b166432592f513c2420b354c3e5f9 SHA1: 204d5b30cc2507353b7cbacc8e3df9e0f8f2b898 SHA256: fba422e20d4526fdf6089e5bebd605d4e8bee5fc0e009f5aeceb935d1a3898a2 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-fl2k Description: use a VGA USB adapter as DAC and SDR transmitter This software allows one to use USB 3.0 to VGA adapters based on the Fresco Logic FL2000 chip as general purpose DACs and SDR transmitter generating a continuous stream of samples by avoiding the HSYNC and VSYNC blanking intervals. Package: osmo-fl2k-dbgsym Source: osmo-fl2k Version: 0.2.1.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Debian Mobcom Maintainers Installed-Size: 101 Depends: osmo-fl2k (= 0.2.1.202601231800) Filename: ./armhf/osmo-fl2k-dbgsym_0.2.1.202601231800_armhf.deb Size: 42236 MD5sum: fa3ff1a4ae855bfccc816faf363b951c SHA1: 6aaf02f53a07b7460a1cd5daf3c752fec72992bc SHA256: 7538f8e64dda8023d0017fd35654ea05f95b59fde9180db6770f30a3955826de Section: debug Priority: optional Description: debug symbols for osmo-fl2k Build-Ids: 38055c300e1241bf42344b5888e90cbbc73f06b2 901372ad1894a04e0716a3b98e811e2df3fc8d41 b7e24df5f8cfa652d1e07189b2372538cb64cfd1 db520cd07da8530c63255a73f491327304f6a5f1 Package: osmo-gbproxy Version: 1:0.5.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 166 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmocore22, libosmoctrl0, libosmogb14, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-sgsn Filename: ./armhf/osmo-gbproxy_0.5.1.202601231800_armhf.deb Size: 39488 MD5sum: 9dc19509052406e52724e2d0cad46273 SHA1: af50d03662279d4942d0ebbd5532e6577ea522ae SHA256: 3cead22c7b4d933d5f3a793b43b122f672f76b1570e546ca0744e1df9afc4447 Section: net Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-gbproxy Description: Osmocom GPRS Gb Interface Proxy The purpose of the Gb proxy is to aggregate the Gb links of multiple BSS's and present them in one Gb link to the SGSN. Package: osmo-gbproxy-dbg Source: osmo-gbproxy Version: 1:0.5.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 221 Depends: osmocom-nightly (= 202601231800), osmo-gbproxy (= 1:0.5.1.202601231800) Filename: ./armhf/osmo-gbproxy-dbg_0.5.1.202601231800_armhf.deb Size: 122060 MD5sum: ebf8e5dd1890a7eb14f0a9996c6b6c08 SHA1: 6054be3fefd63db4a6bc084c5f18180771a60e5c SHA256: d990b793addee8e7ebeec9010306107bafb5a130c8f12d6023b9a8be879438d4 Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-gbproxy Description: Debug symbols for Osmocom GPRS Gb Interface Proxy Build-Ids: 7d5d5b4e111544ccff0aaece7325142c7ed96fde Package: osmo-gbproxy-doc Source: osmo-gbproxy Version: 1:0.5.1.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 1038 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-gbproxy-doc_0.5.1.202601231800_all.deb Size: 972688 MD5sum: 888cf1027cfa2d3d4fd045965cb34a9e SHA1: 24dfb6d86ac05e9e3854658014cd247cf6d047c2 SHA256: cbf2663cfa44896b71cc06a01c74894d37fa64cafbe277cb709aba8e82e00504 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-gbproxy Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-ggsn Version: 1.14.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 316 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.38), libgtp11 (>= 1.13.0), libgtpnl0, libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-ggsn_1.14.0.202601231800_armhf.deb Size: 73732 MD5sum: 6864ea40b06fca4d2fadc1449728c0a7 SHA1: a61000eaa724e0be26d5906cbfe048b29b38743a SHA256: b8f0b12bf86f455096e56ee93199d0b2ade1c7c8ddba6a4587cc4c99a0d1be67 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/openggsn Description: Osmocom Gateway GPRS Support Node (GGSN) OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. Package: osmo-ggsn-dbg Source: osmo-ggsn Version: 1.14.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 471 Depends: osmocom-nightly (= 202601231800), libgtp11 (= 1.14.0.202601231800), osmo-ggsn (= 1.14.0.202601231800) Filename: ./armhf/osmo-ggsn-dbg_1.14.0.202601231800_armhf.deb Size: 281272 MD5sum: d6d95b4a6164d4e0a573ba193b2eb483 SHA1: 6ff5ef75855318a8e243e310f41cbfed3099e8fe SHA256: 70c191ec72dba4fa123a3cf68aa77227890050487fcceb933eb05692cbe80909 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/openggsn Description: Debug symbols for OsmoGGSN OsmoGGSN is a Gateway GPRS Support Node (GGSN). It is used by mobile operators as the interface between the Internet and the rest of the mobile network infrastructure. Build-Ids: 3bbe59257804f35d54fb4538f77f0b7db60e537a 77b3037ef7b2a83ae5276a2d22d271fa3ef4a107 Package: osmo-ggsn-doc Source: osmo-ggsn Version: 1.14.0.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 836 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-ggsn-doc_1.14.0.202601231800_all.deb Size: 789916 MD5sum: bd36edf6f0d5018438eee69f982b6882 SHA1: d56c4c87c87dbc6f2da7859bff0e8c64811ba603 SHA256: f967b7ee19e994a2cce3566e390033bc813d71bf495d2e4cc1ee4e300ab6a571 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/openggsn Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-gsm-manuals-dev Version: 1.7.0.5.1842.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 870 Depends: osmocom-nightly (= 202601231800), asciidoc, asciidoc-dblatex, dblatex, docbook5-xml, graphviz, librsvg2-bin, libxml2-utils, mscgen, python3-nwdiag, xsltproc Filename: ./all/osmo-gsm-manuals-dev_1.7.0.5.1842.202601231800_all.deb Size: 443140 MD5sum: c25254d821eeaf431ce0a9027ac292c3 SHA1: 3b6fb4c5e1ed8fb944e93a08d9e59c721a0f3e34 SHA256: cbc77969f8336e287540bee8ad7ac33c1dee9276b1bc42010292fd2c0c7b1972 Section: devel Priority: optional Homepage: https://git.osmocom.org/osmo-gsm-manuals/ Description: Osmocom manuals shared code All Osomocom repositories require this package to build their manuals. Package: osmo-gtphub Source: osmo-sgsn Version: 1.12.0.77.968b6.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 181 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libcares2 (>= 1.7.1), libgtp11 (>= 1.13.0), libosmo-sigtran12, libosmocore22, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-gtphub_1.12.0.77.968b6.202601231800_armhf.deb Size: 44708 MD5sum: 259b4699f3778a233521f9535436fc14 SHA1: 48b4a532f7df636d98085d637d282a7d52219c49 SHA256: eb0784ecaf0d61e3ad9cb4feb5a26caa479247541a4cbc0cf8a60f47a9045c4d Section: net Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: Osmocom GTP Hub: Proxy for GTP traffic between multiple SGSNs and GGSNs Package: osmo-gtphub-dbg Source: osmo-sgsn Version: 1.12.0.77.968b6.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 243 Depends: osmocom-nightly (= 202601231800), osmo-gtphub (= 1.12.0.77.968b6.202601231800) Filename: ./armhf/osmo-gtphub-dbg_1.12.0.77.968b6.202601231800_armhf.deb Size: 146784 MD5sum: 3c2d7cec4145fbd3370ef8926f3ccd9d SHA1: 64573abd025191b5ddce558ad05817e62b95e4b0 SHA256: d371c0e0e457f3ed25fa1b1a844cb45fabb24ce68161d8080f0140c4d708c004 Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: Debug symbols for Osmocom GTP Hub Build-Ids: b0728072255cf16154146feca006872f910c3266 Package: osmo-hlr Version: 1.9.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 368 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmo-gsup-client0, libosmo-mslookup1, libosmoabis15, libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libsqlite3-0 (>= 3.10.0), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-hlr_1.9.2.202601231800_armhf.deb Size: 88284 MD5sum: c2ce4c31eef586c4fe71a0d21e882c29 SHA1: 5dfccd8711e666c9634875fa5168467184fb52c5 SHA256: d71d57fe4385cc455085bacc1bbfc1edd2778581b333020537063e383c179475 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Osmocom Home Location Register OsmoHLR is a Osmocom implementation of HLR (Home Location Registrar) which works over GSUP protocol. The subscribers are store in sqlite DB. It supports both 2G and 3G authentication. Package: osmo-hlr-dbg Source: osmo-hlr Version: 1.9.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 814 Depends: osmocom-nightly (= 202601231800), osmo-hlr (= 1.9.2.202601231800) Filename: ./armhf/osmo-hlr-dbg_1.9.2.202601231800_armhf.deb Size: 467428 MD5sum: 81f2bef549da4ff86d761ab7ce119b25 SHA1: 5e3ef90b4cfd2fcd93f31af4f5952caebcdca997 SHA256: 2874e966dc2fd07872ee55a95754d91e1688de11a8c493c795eec44f6f980e0b Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Debug symbols for the osmo-hlr Make debugging possible Build-Ids: 1fe05a7acd058d15a3a20d26f2a274ff71510db6 25de65275d7f6a0662ee61c9c4ddbbc65f579ef5 74f769562978ff2a1f715270bd36e28fb698889d 9702497b75d3e18293d2710962b18b8cffe3219a e5f7de6a391a41b83a4e87fa15c5a90b34ab432f Package: osmo-hlr-doc Source: osmo-hlr Version: 1.9.2.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 1291 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-hlr-doc_1.9.2.202601231800_all.deb Size: 1212684 MD5sum: 39921139efac7ceb062ba16b20564140 SHA1: e16813a729d2be413be387151f27029090da8675 SHA256: 282a774eb4e67f22c6587900e413001375fa92272ed8c8b15447149876870b10 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-hnbgw Version: 1.8.0.1.f9bb.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 363 Depends: osmocom-nightly (= 202601231800), libasn1c1, libc6 (>= 2.34), libnftables1 (>= 1.0.2), libosmo-hnbap0, libosmo-mgcp-client14, libosmo-pfcp4, libosmo-ranap7, libosmo-rua0, libosmo-sigtran12, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-mgw Filename: ./armhf/osmo-hnbgw_1.8.0.1.f9bb.202601231800_armhf.deb Size: 104904 MD5sum: 041511296f35fd935df58250425890f4 SHA1: e8de3255b4885aec4f328582ecd8035379a6aca9 SHA256: 01348611ba9f822a8ad512eeb10c37318b980b863ec2308149970c70ad8b8ccf Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-hnbgw Description: OsmoHNBGW: Osmocom Home Node B Gateway Package: osmo-hnbgw-dbg Source: osmo-hnbgw Version: 1.8.0.1.f9bb.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 822 Depends: osmocom-nightly (= 202601231800), osmo-hnbgw (= 1.8.0.1.f9bb.202601231800) Filename: ./armhf/osmo-hnbgw-dbg_1.8.0.1.f9bb.202601231800_armhf.deb Size: 528460 MD5sum: 08fd6812da2f559e7872fe7a89f72eef SHA1: 8fc0bf7fb785109c35b9315e2c393fb6f01b2069 SHA256: 600668dde75b779009bb84aecf7055fc1834303c3c03502c6ee94102ec637299 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hnbgw Description: OsmoHNBGW: Osmocom Home Node B Gateway Build-Ids: 2e55a11dd0081485bdaa0975bb74ea5714ad4ef8 Package: osmo-hnbgw-doc Source: osmo-hnbgw Version: 1.8.0.1.f9bb.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 921 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-hnbgw-doc_1.8.0.1.f9bb.202601231800_all.deb Size: 877284 MD5sum: 0f123057394744513c76e3cea2d00d5e SHA1: e71f0a608c37c332b1d3b7255b7a66de307b9236 SHA256: 5f901c671cbddb462f276be0031a4ec74b4225167dfa74009a68d81cf91fe3de Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-hnbgw Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-hnodeb Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 158 Depends: osmocom-nightly (= 202601231800), libasn1c1, libc6 (>= 2.34), libosmo-hnbap0, libosmo-ranap7, libosmo-rua0, libosmocore22, libosmogsm20, libosmonetif11, libosmotrau11, libosmovty13, libsctp1 (>= 1.0.10+dfsg), libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-mgw Filename: ./armhf/osmo-hnodeb_0.2.1.202601231800_armhf.deb Size: 31484 MD5sum: ed4b7af77f4b6b26a891e5480562b6d1 SHA1: 848e56ce9a9d93471c9b1c385fcfcea6c9903ff6 SHA256: dbf2df4d3cd2b2d56e8f38049ca031f9b9ded61ba1b10bcbf0e7b0cddbc53867 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-hnodeb Description: OsmoHNodeB: Osmocom's Home NodeB for 3G mobile networks Package: osmo-hnodeb-dbg Source: osmo-hnodeb Version: 0.2.1.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 227 Depends: osmocom-nightly (= 202601231800), osmo-hnodeb (= 0.2.1.202601231800) Filename: ./armhf/osmo-hnodeb-dbg_0.2.1.202601231800_armhf.deb Size: 134820 MD5sum: 4f2c980104616fddeb8ddbdffb1fddf8 SHA1: efc83b54ee486300f41a9a443ee45233da8875d6 SHA256: b878d56d2f5ef7aeb203b3aa0bce75b58c9645a834514d967e89d378ab753349 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hnodeb Description: OsmoHNodeB: Osmocom's Home NodeB for 3G mobile networks Build-Ids: 87810fe4ea4a6db99c3524605301d35cf3822191 Package: osmo-hnodeb-doc Source: osmo-hnodeb Version: 0.2.1.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 10 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-hnodeb-doc_0.2.1.202601231800_all.deb Size: 4072 MD5sum: 03cb08ce768b75fb93f017478729e36b SHA1: 891bb2a98980a09d4238c57a969653488f57029f SHA256: 50719c001e428c295580b1d166c4ce0d284c821c77a9852ad49140368b9cdd70 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-hnodeb Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-mgw Version: 1.15.0.1.8afba.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 239 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmoabis15, libosmocodec4, libosmocore22, libosmoctrl0, libosmogsm20, libosmoisdn0, libosmonetif11, libosmotrau11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-mgw_1.15.0.1.8afba.202601231800_armhf.deb Size: 80428 MD5sum: 3569db1da37d1f2fff7ac011b032d8ae SHA1: a18056b24e314cdac5e58283708091c470b93b14 SHA256: 6185ea329b31205ea4660b92f9456100b5841c93ad79ddc6f84a2dd3f6186428 Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/projects/osmo-mgw Description: OsmoMGW: Osmocom's Media Gateway for 2G and 3G circuit-switched mobile networks Package: osmo-mgw-dbgsym Source: osmo-mgw Version: 1.15.0.1.8afba.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 482 Depends: osmo-mgw (= 1.15.0.1.8afba.202601231800) Filename: ./armhf/osmo-mgw-dbgsym_1.15.0.1.8afba.202601231800_armhf.deb Size: 284420 MD5sum: 795f30b72b1fb0ae2045deb227c06a62 SHA1: 14536065b8e42a555d1404e8c7867034447bfe1c SHA256: 36cb8834e9b97c86debed9b2ed2595e201fe3a0b24d1f623da764ec6edb61496 Section: debug Priority: optional Description: debug symbols for osmo-mgw Build-Ids: c9477675da997901e6217992a0015241e13532f2 Package: osmo-mgw-doc Source: osmo-mgw Version: 1.15.0.1.8afba.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 931 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-mgw-doc_1.15.0.1.8afba.202601231800_all.deb Size: 884312 MD5sum: 0f0d7a23f4d101c2bea6214aa761fdcc SHA1: 2e9221a92b4037c74fdfa9f91e138d5b32b9832b SHA256: d6d82a0232ba2875e4adf78d35ef101fa113ee80166dd74dd876a9e7168523ec Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmo-mgw Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-msc Version: 1.15.0.3.80955.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 914 Depends: osmocom-nightly (= 202601231800), libasn1c1, libc6 (>= 2.34), libosmo-gsup-client0, libosmo-mgcp-client14, libosmo-ranap7, libosmo-sigtran12, libosmocore22, libosmoctrl0, libosmogsm20, libosmonetif11, libosmovty13, libsctp1 (>= 1.0.10+dfsg), libsmpp1, libsqlite3-0 (>= 3.6.23), libtalloc2 (>= 2.0.4~git20101213) Recommends: osmo-mgw Filename: ./armhf/osmo-msc_1.15.0.3.80955.202601231800_armhf.deb Size: 275816 MD5sum: b5ce0c91f30538716007434349fdc2e8 SHA1: 8ccaf46146070babee86133c993ce64b0f57a69b SHA256: 1fa3d046eb38578df14f2bd4f534a5579866864103323ad9aabaaf5e5c63c688 Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/projects/osmomsc Description: OsmoMSC: Osmocom's Mobile Switching Center for 2G and 3G circuit-switched mobile networks The Mobile Switching Center (MSC) is the heart of 2G/3G circuit-switched services. It terminates the A-interface links from the Base Station Controllers (BSC) and handles the MM and CC sub-layers of the Layer 3 protocol from the phones (MS). . This Osmocom implementation of the MSC handles A interfaces via 3GPP AoIP in an ASP role. It furthermore implements IETF MGCP against an external media gateway, such as OsmoMGW. It does *not* implement MAP towards a HLR, but the much simpler Osmocom GSUP protocol, which can be translated to MAP if needed. Package: osmo-msc-dbg Source: osmo-msc Version: 1.15.0.3.80955.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 2374 Depends: osmocom-nightly (= 202601231800), osmo-msc (= 1.15.0.3.80955.202601231800) Filename: ./armhf/osmo-msc-dbg_1.15.0.3.80955.202601231800_armhf.deb Size: 1529400 MD5sum: 55e12f4e1fea9bb05e4704bdebe15f3b SHA1: bd631ea9a7bdb7ee7835a3eab978650b2a7ae317 SHA256: eea5a56f3e5a81906afd3048f3cf447a4282d21f51962e5f34184e16b0a931e2 Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/osmomsc Description: OsmoMSC: Osmocom's Mobile Switching Center for 2G and 3G circuit-switched mobile networks The Mobile Switching Center (MSC) is the heart of 2G/3G circuit-switched services. It terminates the A-interface links from the Base Station Controllers (BSC) and handles the MM and CC sub-layers of the Layer 3 protocol from the phones (MS). . This Osmocom implementation of the MSC handles A interfaces via 3GPP AoIP in an ASP role. It furthermore implements IETF MGCP against an external media gateway, such as OsmoMGW. It does *not* implement MAP towards a HLR, but the much simpler Osmocom GSUP protocol, which can be translated to MAP if needed. . This package contains the debug symbols for osmo-msc in order to generate meaningful backtraces in bug-reports. Build-Ids: 4a9323e21aec8927ef2c94c06a52bfddb2dbdb53 Package: osmo-msc-doc Source: osmo-msc Version: 1.15.0.3.80955.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 1657 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-msc-doc_1.15.0.3.80955.202601231800_all.deb Size: 1555216 MD5sum: e8af082ef56ec2e47831a2144334e9a2 SHA1: ed2d1ff530a11bf498069562df6858e2c8b1345f SHA256: 623c760a56ebab4bfa1f7424155626dbc6ff6640e0fbb0ceb9f08e6fa0e53280 Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmomsc Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-mslookup-utils Source: osmo-hlr Version: 1.9.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 81 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmo-mslookup1 (= 1.9.2.202601231800), libosmocore22, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-mslookup-utils_1.9.2.202601231800_armhf.deb Size: 18124 MD5sum: f63a7644ea341a1b3d9180f5982b51d8 SHA1: 386927c7bba30a1a9d88b3bd9a7a7c0c94699e72 SHA256: 48b8445da2be99410a58c6305fa1b0ee33baf24449cbb226d49378f59a5f498a Section: utils Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-hlr Description: Utilities for Osmocom MS lookup This package contains a simple MS lookup client utility. Package: osmo-pcap-client Source: osmo-pcap Version: 0.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 99 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libgnutls30t64 (>= 3.8.4), libosmocore22, libosmogsm20, libosmonetif11, libosmovty13, libpcap0.8t64 (>= 0.9.8), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-pcap-client_0.8.0.202601231800_armhf.deb Size: 26588 MD5sum: 65ad78c2273518ce42ee5532d826eb81 SHA1: 8938ca85dbf3f60d931bd1e8e59b56c0ef28d02f SHA256: 7c3121987273158d428cac55ac84c920fcc7300756283bf347bf27496c2d6188 Section: net Priority: extra Homepage: https://osmocom.org/projects/osmo-pcap Description: Run osmo-pcap-client locally and send traces to a different system. Package: osmo-pcap-client-dbg Source: osmo-pcap Version: 0.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 168 Depends: osmocom-nightly (= 202601231800), osmo-pcap-client (= 0.8.0.202601231800) Filename: ./armhf/osmo-pcap-client-dbg_0.8.0.202601231800_armhf.deb Size: 95472 MD5sum: 92756ab936edb35e1caf4e8de5e466a3 SHA1: a3da881e125b941fa3d36bc01a3c571723c9b36d SHA256: 299c654d325546ba7cba14d7b4c050c59eadce97dd48b06639d3d70af3d03ecf Section: net Priority: extra Homepage: https://osmocom.org/projects/osmo-pcap Description: Debug symbols of osmo-pcap-client-dbg Build-Ids: acfae3dfd043f94d453edb725deb5bad96490145 Package: osmo-pcap-server Source: osmo-pcap Version: 0.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 102 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libgnutls30t64 (>= 3.8.4), libosmocore22, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213), libzmq5 (>= 3.2.3+dfsg) Filename: ./armhf/osmo-pcap-server_0.8.0.202601231800_armhf.deb Size: 31284 MD5sum: 5d0ea8a365b171458c8f0eee3881cd0a SHA1: 5e46fd19d45cca55e7e4abb805cc811b83f1cab0 SHA256: 4940b15f3bd86dd9a631a203305fb4536e313d795d50f3c6beb7d44e1ee46ff2 Section: net Priority: extra Homepage: https://osmocom.org/projects/osmo-pcap Description: Collect traces from other systems. Package: osmo-pcap-server-dbg Source: osmo-pcap Version: 0.8.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 184 Depends: osmocom-nightly (= 202601231800), osmo-pcap-server (= 0.8.0.202601231800) Filename: ./armhf/osmo-pcap-server-dbg_0.8.0.202601231800_armhf.deb Size: 100964 MD5sum: c3841da142f397c644e95e7b2ba94642 SHA1: 7e9e7656524df2136bf5158c36c37fa47be30b8c SHA256: d3726118f88e409f501016c4fe6b333b8b7ba09ef9650ccb81a9595ea334d19d Section: net Priority: extra Homepage: https://osmocom.org/projects/osmo-pcap Description: Debug symbols of osmo-pcap-server-dbg Build-Ids: 063d3e3ddc0595e6f7b9d5545c4d7e0fa0729b12 Package: osmo-pcu Version: 1.5.2.2.e96e.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 635 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.38), libgcc-s1 (>= 3.5), libosmoabis15, libosmocore22, libosmogb14, libosmogsm20, libosmoisdn0, libosmotrau11, libosmovty13, libstdc++6 (>= 4.1.1), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-pcu_1.5.2.2.e96e.202601231800_armhf.deb Size: 210820 MD5sum: 7cfbd9126400dd7d3ff55a15f27ede92 SHA1: 22e36f17d5bc96131660acce551c38e18c44bce1 SHA256: 9197a2434f70dc12bc8adeeda470137c593b5255b23beff4f9988dae653af264 Section: net Priority: optional Homepage: http://osmocom.org/projects/osmopcu Description: Osmocom GPRS/EDGE Packet Control Unit (PCU) The GPRS Packet Control Unit is co-located with the GSM BTS or GSM BSC in order to provide packet-switched services for 2G (2.5G, 2.75G) networks. OsmoPCU is the Osmocom implementation of this network element. It interfaces to osmo-bts via the PCU socket of OsmoBTS and via Gb (NS-over-IP) interface with the SGSN such as OsmoSGSN. Package: osmo-pcu-dbg Source: osmo-pcu Version: 1.5.2.2.e96e.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1565 Depends: osmocom-nightly (= 202601231800), osmo-pcu (= 1.5.2.2.e96e.202601231800) Filename: ./armhf/osmo-pcu-dbg_1.5.2.2.e96e.202601231800_armhf.deb Size: 1030612 MD5sum: 9579580a599075ea70d775034f954b17 SHA1: bd103779a5bbd9eddd1b42683dad02c205973e5d SHA256: 20e95dc07cc383422c07be5d4a460472a07b54ed7e48bd24589c8d33d3a9229a Section: debug Priority: extra Homepage: http://osmocom.org/projects/osmopcu Description: Debug symbols for the Osmocom GPRS/EDGE Packet Control Unit (PCU) The GPRS Packet Control Unit is co-located with the GSM BTS or GSM BSC in order to provide packet-switched services for 2G (2.5G, 2.75G) networks. OsmoPCU is the Osmocom implementation of this network element. It interfaces to osmo-bts via the PCU socket of OsmoBTS and via Gb (NS-over-IP) interface with the SGSN such as OsmoSGSN. Build-Ids: 873f7fc88e2b0417fb40f078bdf37f2363827c53 Package: osmo-pcu-doc Source: osmo-pcu Version: 1.5.2.2.e96e.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 1093 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-pcu-doc_1.5.2.2.e96e.202601231800_all.deb Size: 1031536 MD5sum: 8a74b367efc0b082319e3d7148e2de3e SHA1: 38a59001d0863a41c501aae05635a64d340076f9 SHA256: 6d6f1f8167b40869b0a179f6fc8bf7973cf78a13db4c3d07a5e6a5f6a64d2d1c Section: doc Priority: optional Homepage: http://osmocom.org/projects/osmopcu Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-remsim-apitool Source: osmo-remsim Version: 1.1.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 18 Depends: osmocom-nightly (= 202601231800), python3, python3-requests Filename: ./armhf/osmo-remsim-apitool_1.1.2.202601231800_armhf.deb Size: 8936 MD5sum: 2bb013b6d2d7c3dc53ee9376cc76d703 SHA1: 97005f8d1e4231d4d33fb3ddaa3f574420f1ebaa SHA256: cb15215f21ea614bc6bb44c3739f08c2e47a01af974a725165ac919b4ccebf76 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - API tool for server This is a small python tool for generating API requests to remsim-server, which can be used by the system administrator to introspect and/or modify the state (mostly slotmaps). Package: osmo-remsim-bankd Source: osmo-remsim Version: 1.1.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 97 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.38), libcsv3 (>= 3.0.3), libosmo-rspro2, libosmocore22, libosmogsm20, libosmonetif11, libpcsclite1 (>= 1.5.0), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-remsim-bankd_1.1.2.202601231800_armhf.deb Size: 30504 MD5sum: 5929dfc8c058e3fec2b3a1f6bc88fd03 SHA1: f5d118312cee4960b0287a745951eb22607fd65e SHA256: 371cbf1dacf1b387e24b7a027674069405bc8ac65ee30e138c4c5e74f25547ac Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Bank Daemon The remsim-bankd is managing a bank of SIM card readers and their respective cards. It establishes a control connection to remsim-server and receives inbound connections from remsim-clients. Package: osmo-remsim-bankd-dbgsym Source: osmo-remsim Version: 1.1.2.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 157 Depends: osmo-remsim-bankd (= 1.1.2.202601231800) Filename: ./armhf/osmo-remsim-bankd-dbgsym_1.1.2.202601231800_armhf.deb Size: 84024 MD5sum: ccb8cbb5141913b0f18adb13d6ec7ae4 SHA1: 4b0b161aa1b5a54c877eb0f454c688332fbe7590 SHA256: 80a9881ed1dd607a9abf1ad14929ad7cf082f77278ca7fd6bc9f17b0abaf8b59 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for osmo-remsim-bankd Build-Ids: 4e6b7f2c37501ad3a0e6cdc1408be0f0a567253a Package: osmo-remsim-client-shell Source: osmo-remsim Version: 1.1.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 80 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmo-rspro2, libosmocore22, libosmogsm20, libosmonetif11, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-remsim-client-shell_1.1.2.202601231800_armhf.deb Size: 21140 MD5sum: 31627e1c090df0e4908e70a2b59f85fd SHA1: 512ce6388d02d79471351e3872b2e7cc957fd060 SHA256: 579f52a5e92c151983fba9ff62b238e2cdd90e7bdbd27b5b64e69852afcafe3c Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Interactive Client The remsim-client-shell is for manually interacting with a remote SIM card via remsim-bankd + remsim-server. It's mostly a test/debug tool. Package: osmo-remsim-client-shell-dbgsym Source: osmo-remsim Version: 1.1.2.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 115 Depends: osmo-remsim-client-shell (= 1.1.2.202601231800) Filename: ./armhf/osmo-remsim-client-shell-dbgsym_1.1.2.202601231800_armhf.deb Size: 64396 MD5sum: 52c6fef606b999a1f5174ffdfc58530c SHA1: bf99bec7794e03bc223a9c1344c63eefe3b927fc SHA256: da178b03f2ec1ad8757a26eaf239b2c0950508d213e5227ebfba39d521ce3d58 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for osmo-remsim-client-shell Build-Ids: e4ee9d79dc90b4566ba5d8ca82c72e39c21c8aab Package: osmo-remsim-client-st2 Source: osmo-remsim Version: 1.1.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 92 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmo-rspro2, libosmo-simtrace2-1, libosmocore22, libosmogsm20, libosmonetif11, libosmousb0, libtalloc2 (>= 2.0.4~git20101213), libusb-1.0-0 (>= 2:1.0.21) Breaks: osmo-remsim-client Replaces: osmo-remsim-client Filename: ./armhf/osmo-remsim-client-st2_1.1.2.202601231800_armhf.deb Size: 23960 MD5sum: 6efc86f09446a295e6d54e29fa79910f SHA1: 8cac2a77ad8c101a9bb75c90b0477055f890c6ef SHA256: 76d86601723f035702d250afe894811ecd1e0a0834762810ff8de35afaf06370 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Client for SIMtrace2 cardem firmware The remsim-client is managing a given phone/modem. It attaches to the 'cardem' firmware of a SIMtrcace2 (or compatible, such as sysmoQMOD) hardware and forwards the SIM card communication to a remsim-bankd, under the control of remsim-server. Package: osmo-remsim-client-st2-dbgsym Source: osmo-remsim Version: 1.1.2.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 129 Depends: osmo-remsim-client-st2 (= 1.1.2.202601231800) Filename: ./armhf/osmo-remsim-client-st2-dbgsym_1.1.2.202601231800_armhf.deb Size: 72980 MD5sum: 243c2cf8d51d9d6498a600b8cbac15c3 SHA1: e4b4f8b1923861475daa74a90df8a6e6b4711821 SHA256: e0d37686c1a299e27f572a241ad90dc35a2a3eb9d3aa534a2b123b8f69d21250 Section: debug Priority: optional Multi-Arch: same Description: debug symbols for osmo-remsim-client-st2 Build-Ids: d2f3c6ccf01358854376676e649c6c94395b0689 Package: osmo-remsim-doc Source: osmo-remsim Version: 1.1.2.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 280 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-remsim-doc_1.1.2.202601231800_all.deb Size: 270712 MD5sum: f687aff607176e174c052328bc050b7b SHA1: a64cc4c8abdd8298b4cc00f2f7d5a301c141ce78 SHA256: 950200150442e7e64f8460cafdfaaa9db0eaf9319df854c5431f7b8e076c01a4 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM documentation User manual for Osmocom Remote SIM in PDF format. Package: osmo-remsim-server Source: osmo-remsim Version: 1.1.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libjansson4 (>= 2.14), liborcania2.3 (>= 2.1.0), libosmo-rspro2, libosmocore22, libosmogsm20, libosmonetif11, libtalloc2 (>= 2.0.4~git20101213), libulfius2.7t64 (>= 2.7.0) Filename: ./armhf/osmo-remsim-server_1.1.2.202601231800_armhf.deb Size: 26560 MD5sum: 3430823c860f0568d0296eb3b08973ed SHA1: 7825d1057e91d4af3f19c82777361b0297c46a22 SHA256: 1e2ca8b8b88a66bfc93f79c6c6dcd9f3aa940b44149d6d2919163dd400b67173 Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-remsim Description: Osmocom Remote SIM - Central Server The remsim-server is the central element of a osmo-remsim deployment, it maintains a list of clients + bankds connected to it, as well as the dynamic SIM card mappings between them. Package: osmo-remsim-server-dbgsym Source: osmo-remsim Version: 1.1.2.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 146 Depends: osmo-remsim-server (= 1.1.2.202601231800) Filename: ./armhf/osmo-remsim-server-dbgsym_1.1.2.202601231800_armhf.deb Size: 81328 MD5sum: 3e8c5f0869f1f122bf0430f36af97091 SHA1: 6d9646eb1dff4a6ec063e5fc89cc2328554e2d2f SHA256: df1828fc668b8b2c504421f42bce5a19dbcd927e797f8cbabbddc62dafe32eee Section: debug Priority: optional Multi-Arch: same Description: debug symbols for osmo-remsim-server Build-Ids: a1ff05d44aaf73b3f897fd16b85f6a4420dc4ada Package: osmo-sgsn Version: 1.12.0.77.968b6.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 376 Depends: osmocom-nightly (= 202601231800), libasn1c1, libc6 (>= 2.34), libcares2 (>= 1.7.1), libgtp11 (>= 1.13.0), libosmo-gsup-client0, libosmo-ranap7, libosmo-sigtran12, libosmocore22, libosmoctrl0, libosmogb14, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-sgsn_1.12.0.77.968b6.202601231800_armhf.deb Size: 125972 MD5sum: 4a19f29f77591fed61b2adde5c871b8c SHA1: eb6b60e526481146feec2073f87e5cdd2e022a34 SHA256: 9c94df3a76874bfd9f0ea6d8017e8a5bb75e5ddc4d1e7b4f63fad4e758bf1119 Section: net Priority: extra Multi-Arch: foreign Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: OsmoSGSN: Osmocom's Serving GPRS Support Node for 2G and 3G packet-switched mobile networks Package: osmo-sgsn-dbg Source: osmo-sgsn Version: 1.12.0.77.968b6.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1028 Depends: osmocom-nightly (= 202601231800), osmo-sgsn (= 1.12.0.77.968b6.202601231800) Filename: ./armhf/osmo-sgsn-dbg_1.12.0.77.968b6.202601231800_armhf.deb Size: 674768 MD5sum: ec5262b43d5917f984f984d200e0e0aa SHA1: 31928561d779ecc0cb86bd6f7bf2cd5d4772fa6a SHA256: 56def47c704f134e7e0dab492be41bdb39050497034c6d3a723f3577f51aeb94 Section: debug Priority: extra Multi-Arch: same Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: OsmoSGSN: Osmocom's Serving GPRS Support Node for 2G and 3G packet-switched mobile networks Build-Ids: d41049ea656cf748c3531f7caecd0e23b7497d79 Package: osmo-sgsn-doc Source: osmo-sgsn Version: 1.12.0.77.968b6.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 1550 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-sgsn-doc_1.12.0.77.968b6.202601231800_all.deb Size: 1442980 MD5sum: f7f053aed54e55f0135f0c5534befdd6 SHA1: 13ddffd6cc32c131704f773f17f1e12679e77944 SHA256: b5d5e7091f634063fee81328d18f1371433c1e7c58a18e4d2e0f3c6b895a45fa Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmo-sgsn Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-sip-connector Version: 1.7.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 93 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libglib2.0-0t64 (>= 2.12.0), libosmocore22, libosmogsm20, libosmovty13, libsofia-sip-ua-glib3t64 (>= 1.12.10), libsofia-sip-ua0t64 (>= 1.12.10), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-sip-connector_1.7.2.202601231800_armhf.deb Size: 27832 MD5sum: a32cefcdb192855d77c88afd65990eb0 SHA1: 1e8e260477551b148dab41ee9157d6554608e76a SHA256: 84c5e2019991d312fc4cdc1b47aa7ee16c2b19bada778833b570f1cd58e9100c Section: net Priority: optional Homepage: https://osmocom.org/projects/osmo-sip-conector/wiki Description: MNCC to SIP bridge for osmo-nitb Use the osmo-nitb MNCC interface and bridge it to SIP. Package: osmo-sip-connector-dbg Source: osmo-sip-connector Version: 1.7.2.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 174 Depends: osmocom-nightly (= 202601231800), osmo-sip-connector (= 1.7.2.202601231800) Filename: ./armhf/osmo-sip-connector-dbg_1.7.2.202601231800_armhf.deb Size: 102272 MD5sum: d7bbdb0094af91fdb30599dbf6c2995a SHA1: 5692de8e798f84d939aec0eaebf4e5928ca579af SHA256: 46eff3e921cf0239cde1e8ee91c7f85ceb249c72dff4f063b9717b1c5f0211e3 Section: debug Priority: extra Homepage: https://osmocom.org/projects/osmo-sip-conector/wiki Description: Debug symbols for the osmo-sip-connector Make debugging possible Build-Ids: f141346d822fb99c17d7601fc8770f2820323403 Package: osmo-sip-connector-doc Source: osmo-sip-connector Version: 1.7.2.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 657 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-sip-connector-doc_1.7.2.202601231800_all.deb Size: 623400 MD5sum: 388067fe44dbcf84577705e3ea34fc72 SHA1: 0f5d5224860ce0ab34ea35a6b542e14bd10e0580 SHA256: 6b12c1d384748f6c74f03213bb1a1e8b953d250a201c5c9d505bc23742936e6c Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmo-sip-conector/wiki Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-smlc Version: 0.4.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 92 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmo-sigtran12, libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libtalloc2 (>= 2.0.4~git20101213), libdbd-sqlite3 Filename: ./armhf/osmo-smlc_0.4.0.202601231800_armhf.deb Size: 26728 MD5sum: 11e5ecc37aee322ca6d4401aafa73f4d SHA1: 06a9aa707f6d1664300356f00a9157df36686036 SHA256: 218d7822a0d2a79fce11f9e76afc665574d45f246cedb7a10a549acfc1d7ded6 Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/projects/osmo-smlc Description: OsmoSMLC: Osmocom's Location Services Center FIXME . This Osmocom implementation of the SMLC handles Lb interfaces via 3GPP Lb in an M3UA ASP role. Package: osmo-smlc-dbg Source: osmo-smlc Version: 0.4.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 178 Depends: osmocom-nightly (= 202601231800), osmo-smlc (= 0.4.0.202601231800) Filename: ./armhf/osmo-smlc-dbg_0.4.0.202601231800_armhf.deb Size: 104604 MD5sum: e339bd79757f624b560f77f72a59a6cf SHA1: 84f54e32e94f3b56be141fd622a90399247379a8 SHA256: 898dccd59367f0b45b9181350bc089a6d0d707f720f773e8c7286b1163c9655b Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/projects/osmo-smlc Description: OsmoSMLC: Osmocom's Location Services Center FIXME . This Osmocom implementation of the SMLC handles Lb interfaces via 3GPP Lb in an M3UA ASP role. . This package contains the debug symbols for osmo-smlc in order to generate meaningful backtraces in bug-reports. Build-Ids: bc7f8c9bf7ae29a4dcff85b90b73ddfc2b3dee49 Package: osmo-smlc-doc Source: osmo-smlc Version: 0.4.0.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 884 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-smlc-doc_0.4.0.202601231800_all.deb Size: 834732 MD5sum: 21b72f115b2429cbc96af4cdc68e5156 SHA1: d172ef8f3f55df634ae7aa94790e7a99d96c6477 SHA256: a849983fb5b00f3faebcc80fe81caaaddfbd3d5390230066f14aabb04a050248 Section: doc Priority: optional Homepage: https://osmocom.org/projects/osmo-smlc Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-stp Source: libosmo-sigtran Version: 2.2.1.4.74d0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 108 Depends: osmocom-nightly (= 202601231800), libosmo-sigtran12, libc6 (>= 2.34), libosmocore22, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-stp_2.2.1.4.74d0.202601231800_armhf.deb Size: 22380 MD5sum: 83786de62d710ef7c5c3f438acfb70b5 SHA1: 3f6a5c15e3558c3cc0a57ba3544e206ccfd462f1 SHA256: b122fb31b3c90f0a98d8587513f2c67b078f9f840854c8135ade87cdc1598a6c Section: net Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Osmocom SIGTRAN STP (Signaling Transfer Point) This is the Osmocom (Open Source Mobile Communications) implementation of a Signaling Transfer Point (STP) for SS7/SIGTRAN telecommunication networks. At this point it is a very minimal implementation, missing lots of the functionality usually present in a STP, such as Global Title Routing, Global Title Translation. Package: osmo-stp-dbg Source: libosmo-sigtran Version: 2.2.1.4.74d0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 50 Depends: osmocom-nightly (= 202601231800), osmo-stp (= 2.2.1.4.74d0.202601231800) Filename: ./armhf/osmo-stp-dbg_2.2.1.4.74d0.202601231800_armhf.deb Size: 27200 MD5sum: 795efc013dc9118eb19748ff13051b3b SHA1: f36968defeec34064e75c6a3ccf77fa0b7d6db95 SHA256: 8bab33b86db1b84dddacaef53e30489eedfec72d9921c0877903ade927586634 Section: debug Priority: optional Multi-Arch: same Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: Debug symbols for Osmocom SIGTRAN STP (Signaling Transfer Point) This package contains debug symbols for the Osmocom SIGTRAN STP (OsmoSTP). . OsmoSTP is the Osmocom (Open Source Mobile Communications) implementation of a Signaling Transfer Point (STP) for SS7/SIGTRAN telecommunication networks. At this point it is a very minimal implementation, missing lots of the functionality usually present in a STP, such as Global Title Routing, Global Title Translation. Build-Ids: 081053f094910954a0a0d027307fa60461742236 Package: osmo-stp-doc Source: libosmo-sigtran Version: 2.2.1.4.74d0.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 847 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-stp-doc_2.2.1.4.74d0.202601231800_all.deb Size: 803236 MD5sum: 2e838290d52270bf9650c68779f424ce SHA1: 1b9d86358e746445780988d559ce9c09e9171443 SHA256: bb435bbd5870f4ebdbdac2ff7518441288d4b328a04e2f8c27397b7ce364c65b Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/libosmo-sccp Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-sysmon Version: 0.3.2.6.692b.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 88 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libmnl0 (>= 1.0.3-4~), liboping0 (>= 1.7.0), libosmocore22, libosmogsm20, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-sysmon_0.3.2.6.692b.202601231800_armhf.deb Size: 18700 MD5sum: cd81d5260a49c9d9f7d9e5c6975b89fc SHA1: b3c10dbb47c04d9265804a1e4d5856164c82345d SHA256: ea64c52ecc323cb988da9a440e50aafc7357848ef982840887afe568ffc03f37 Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/ Description: Simple Osmocom System Monitor (osysmon) This application prints on screen once per second relevant information about the status of the system. Information being printed can be specified through configuration file (and VTY). . Useful to run as a login shell to provide users with some diagnose system without providing full access the system. Package: osmo-sysmon-dbg Source: osmo-sysmon Version: 0.3.2.6.692b.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 123 Depends: osmocom-nightly (= 202601231800), osmo-sysmon (= 0.3.2.6.692b.202601231800) Filename: ./armhf/osmo-sysmon-dbg_0.3.2.6.692b.202601231800_armhf.deb Size: 71076 MD5sum: a5e47daf49b0cb0eb0caed3ece03d93b SHA1: 75e1a31cd8895907671b4e4215199e0622c21af1 SHA256: 3bf51c4535d2824079e8907e2e4ca2c4543b0fc113365bacaefa41f230c998a9 Section: debug Priority: extra Multi-Arch: same Homepage: https://osmocom.org/ Description: Simple Osmocom System Monitor (osysmon) This application prints on screen once per second relevant information about the status of the system. Information being printed can be specified through configuration file (and VTY). . Useful to run as a login shell to provide users with some diagnose system without providing full access the system. . This package contains the debug symbols for osmo-sysmon in order to generate meaningful backtraces in bug-reports. Build-Ids: a499c15515e7896dbda78e08542e02d77cf1ac41 Package: osmo-trx Version: 1.7.2.1.eb9e.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 22 Depends: osmocom-nightly (= 202601231800), osmo-trx-uhd Filename: ./all/osmo-trx_1.7.2.1.eb9e.202601231800_all.deb Size: 12468 MD5sum: 9f67af43a1d675f17bbe6e920252ff4f SHA1: 49a1e3048e44223e68981723b08cb3e88324667a SHA256: a384f2f3cff4fa13c8156ed517f3cdf6aff098f107995df154ff82a8627e1ccd Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: Metapackage for osmo-trx-uhd Package: osmo-trx-dbg Source: osmo-trx Version: 1.7.2.1.eb9e.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 8607 Depends: osmocom-nightly (= 202601231800), osmo-trx-uhd (= 1.7.2.1.eb9e.202601231800), osmo-trx-usrp1 (= 1.7.2.1.eb9e.202601231800), osmo-trx-lms (= 1.7.2.1.eb9e.202601231800), osmo-trx-ipc (= 1.7.2.1.eb9e.202601231800) Filename: ./armhf/osmo-trx-dbg_1.7.2.1.eb9e.202601231800_armhf.deb Size: 6966508 MD5sum: f7d46bdd56033bacf7ec53836b38d29e SHA1: e55eddc97b631605c89bb7cf3d4b0953506c8fef SHA256: e1fbdcc1f28aed9a0bb3ccd6298259879f00d7fba399633916e82f6c73bc4f3d Section: debug Priority: extra Homepage: https://projects.osmocom.org/projects/osmotrx Description: Debug symbols for the osmo-trx-* Make debugging possible Build-Ids: 1895600c00770bc2aaeae5f49003cf7111293141 285e3d31f507a882469a6961903158d7ad633d8d 7098b2e8896a94726de9d6596c9fd60b71a0eeef e989d0ee8dc4ba97cac17feafd9bd3e6f1fe0b02 f8e2dcc150b08f44fa91a9c2114b7dac08506185 Package: osmo-trx-doc Source: osmo-trx Version: 1.7.2.1.eb9e.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 790 Depends: osmocom-nightly (= 202601231800) Filename: ./all/osmo-trx-doc_1.7.2.1.eb9e.202601231800_all.deb Size: 755356 MD5sum: 0595eadd799c24bc6c8a46922bd8fd5b SHA1: eb7019d091232d678de84ff9fdb0a6f096cf085c SHA256: 240b0809b33ef257e66f7b25b81ccf25ba79f1776c88e480b5adbdab1fb9d9a6 Section: doc Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: PDF documentation Various manuals: user manual, VTY reference manual and/or protocol/interface manuals. Package: osmo-trx-ipc Source: osmo-trx Version: 1.7.2.1.eb9e.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 364 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.38), libfftw3-single3 (>= 3.3.10), libgcc-s1 (>= 4.0), libosmocore22, libosmoctrl0, libosmovty13, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-trx-ipc_1.7.2.1.eb9e.202601231800_armhf.deb Size: 126048 MD5sum: 77254f0d21ddef95b891a8a1a3e3722f SHA1: 19b4430ea21cb761afa8c5588f4c47442fb800c5 SHA256: 5cc7269e1b945555c949a2500c14a74fb9499bd306f2541da931d7911725ffaf Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: SDR transceiver that implements Layer 1 of a GSM BTS (generic IPC) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-trx-lms Source: osmo-trx Version: 1.7.2.1.eb9e.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 364 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.38), libfftw3-single3 (>= 3.3.10), libgcc-s1 (>= 4.0), liblimesuite23.11-1 (>= 23.11.0+dfsg), libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-trx-lms_1.7.2.1.eb9e.202601231800_armhf.deb Size: 127584 MD5sum: 1f0873e949b4fe3d2aaa142a0f1c9b4e SHA1: 564fe1549960d2010bda1295aff91622b0214c8c SHA256: 689456f33e37985ae818626a120a064aa638940c8bba4f45e309e548b94999c6 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: SDR transceiver that implements Layer 1 of a GSM BTS (LimeSuite) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-trx-ms-blade Source: osmo-trx Version: 1.7.2.1.eb9e.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 282 Depends: osmocom-nightly (= 202601231800), libbladerf2 (>= 0.2024.05), libc6 (>= 2.38), libgcc-s1 (>= 4.0), libosmocodec4, libosmocoding0, libosmocore22, libosmogsm20, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-trx-ms-blade_1.7.2.1.eb9e.202601231800_armhf.deb Size: 99112 MD5sum: 6b90e9863cfe258a03a6b212fc890456 SHA1: 36f3ffd541c12beb4c4520e79d0176a3924c3081 SHA256: 2579afedf3c6f7125dc62c0c570abf3d383274fde7394a1034cb2540cca47f82 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: MS side transceiver (bladeRF) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-trx-uhd Source: osmo-trx Version: 1.7.2.1.eb9e.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 430 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.38), libfftw3-single3 (>= 3.3.10), libgcc-s1 (>= 4.0), libosmocore22, libosmoctrl0, libosmogsm20, libosmovty13, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213), libuhd4.8.0 (>= 4.8.0.0+ds1) Filename: ./armhf/osmo-trx-uhd_1.7.2.1.eb9e.202601231800_armhf.deb Size: 134576 MD5sum: b97307e34e42ab6122db3e5d184e75f3 SHA1: 931ad1489ea1e3533d22e8d0a39634311f7b7574 SHA256: 6fba1482f5fe9115f8601a8bf8682a27d7ba7b1da59a4b9dd2f4dbd3a8aa6b10 Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: SDR transceiver that implements Layer 1 of a GSM BTS (UHD) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-trx-usrp1 Source: osmo-trx Version: 1.7.2.1.eb9e.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 705 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.38), libfftw3-single3 (>= 3.3.10), libgcc-s1 (>= 4.0), libosmocore22, libosmoctrl0, libosmovty13, libstdc++6 (>= 14), libtalloc2 (>= 2.0.4~git20101213), libusrp1 Filename: ./armhf/osmo-trx-usrp1_1.7.2.1.eb9e.202601231800_armhf.deb Size: 257564 MD5sum: d3146c947f6c86ed36b79a4e5d878736 SHA1: f479ddd503e11d53b570c241e91c096bf5722dde SHA256: 40111afa3aea6a5a5957fa9ed528687a8c9f90d5762017a560196365ecac506b Section: net Priority: optional Homepage: https://projects.osmocom.org/projects/osmotrx Description: SDR transceiver that implements Layer 1 of a GSM BTS (USRP1) OsmoTRX is a software-defined radio transceiver that implements the Layer 1 physical layer of a BTS comprising the following 3GPP specifications: . TS 05.01 "Physical layer on the radio path" TS 05.02 "Multiplexing and Multiple Access on the Radio Path" TS 05.04 "Modulation" TS 05.10 "Radio subsystem synchronization" . In this context, BTS is "Base transceiver station". It's the stations that connect mobile phones to the mobile network. . 3GPP is the "3rd Generation Partnership Project" which is the collaboration between different telecommunication associations for developing new generations of mobile phone networks. (post-2G/GSM) Package: osmo-uecups Version: 0.3.0.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 83 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libjansson4 (>= 2.14), libnl-3-200 (>= 3.2.7), libnl-route-3-200 (>= 3.2.7), libosmocore22, libosmonetif11, libosmovty13, libtalloc2 (>= 2.0.4~git20101213) Filename: ./armhf/osmo-uecups_0.3.0.202601231800_armhf.deb Size: 22140 MD5sum: c1ec1e624e7481dac88f2fee0b11eba5 SHA1: b80577833b44d948e778427d337f9ccdd7207982 SHA256: 3040526bd6712994dcf84cac84d87e4324afff47603eb6c7daac22b65feea8cb Section: net Priority: extra Multi-Arch: foreign Homepage: https://osmocom.org/projects/osmo-uecups Description: OsmoUECUPS: UE/MME/SGW side GTP user plane daemon with control plane separation Package: osmo-uecups-dbgsym Source: osmo-uecups Version: 0.3.0.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 151 Depends: osmo-uecups (= 0.3.0.202601231800) Filename: ./armhf/osmo-uecups-dbgsym_0.3.0.202601231800_armhf.deb Size: 87732 MD5sum: 9759c3ea0a2d810ba822065e4a2c9c9a SHA1: 5dfd6908d40a22f19dd80a5663dfaa2504165834 SHA256: 724449217f22f42cb93963150678b770b53435e5466a9482e8b94778bc861431 Section: debug Priority: optional Description: debug symbols for osmo-uecups Build-Ids: 8c030578ba930e5cb83926b8e3bc4f8d806a89f9 Package: osmocom-keyring Version: 1.1.1.8.7873.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 11 Filename: ./armhf/osmocom-keyring_1.1.1.8.7873.202601231800_armhf.deb Size: 3200 MD5sum: 7965c95ebd3bc0cea2a0140184b9e439 SHA1: 298bca03479cb4c925bf1ba3782f583266e32d87 SHA256: 80f9cd935f9f621b315d6710a156e825554eb8ddfece89c148f1a2510ad572ef Section: misc Priority: optional Homepage: https://osmocom.org/ Description: Pubkey for Osmocom repositories at obs.osmocom.org Package: osmocom-nightly Version: 202601231800 Architecture: armhf Maintainer: Osmocom OBS scripts Installed-Size: 7 Depends: osmocom-keyring Conflicts: osmocom-2022q1, osmocom-2022q2, osmocom-2023q1, osmocom-latest, osmocom-master, osmocom-nightly Filename: ./armhf/osmocom-nightly_202601231800_armhf.deb Size: 1192 MD5sum: 82f907d5975021a761d9abce085e5611 SHA1: 461271d684117ad704e952c3604bc12e0977125e SHA256: c3977e733b102be563272dff7dedb1c45337c8856315895d86db7a1e9b9b4360 Section: unknown Priority: optional Description: Dummy package, conflicts with ['osmocom-2022q1', 'osmocom-2022q2', 'osmocom-2023q1', 'osmocom-latest', 'osmocom-master', 'osmocom-nightly'] Package: python3-osmopy-libs Source: osmo-python-tests Version: 0.3.0.166.5d0f.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 83 Depends: osmocom-nightly (= 202601231800), python3:any Filename: ./all/python3-osmopy-libs_0.3.0.166.5d0f.202601231800_all.deb Size: 17820 MD5sum: 62f5310c4025b2b2c9a68f49b7dd14da SHA1: feb3c02e8d8ae70cb87cc4babdcefb713414749d SHA256: a25e88708162083decc245e689a03e9a00761c8ac851b50e9b3d457f5a20c033 Section: python Priority: optional Homepage: https://gitea.osmocom.org/cellular-infrastructure/osmo-python-tests Description: Python code (not only) for testing of Osmocom programs . This package contains the Python 3 version of osmopy libraries. Package: python3-osmopy-utils Source: osmo-python-tests Version: 0.3.0.166.5d0f.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 58 Depends: osmocom-nightly (= 202601231800), python3:any, python3-osmopy-libs, python3-aiohttp Filename: ./all/python3-osmopy-utils_0.3.0.166.5d0f.202601231800_all.deb Size: 13008 MD5sum: 9ead318351383f8fa78ef8a57a03b312 SHA1: 95da66df22de7901fca27a8f50cb222206488383 SHA256: 16d77eb18a9894bdfa8e60ed63b23dc549805faef4ba443cf51e6c2e57caf16d Section: python Priority: optional Homepage: https://gitea.osmocom.org/cellular-infrastructure/osmo-python-tests Description: Python code (not only) for testing of Osmocom programs . This package contains the Python 3 version of osmopy utils. Package: rtl-sdr Version: 2.0.2.2.ae0d.202601231800 Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 568 Depends: osmocom-nightly (= 202601231800), librtlsdr0 (= 2.0.2.2.ae0d.202601231800), libc6 (>= 2.34) Filename: ./armhf/rtl-sdr_2.0.2.2.ae0d.202601231800_armhf.deb Size: 53408 MD5sum: 52da730de969edcc3adc70ed88434729 SHA1: bc241dd8bb93b22286e3e96329c864a043d0ca54 SHA256: 4af29cc9f9c3d2bc74d7563aec3773eaca1dd7a2766f8b4da1087097b5d0f73d Section: comm Priority: optional Homepage: http://sdr.osmocom.org/trac/wiki/rtl-sdr Description: Software defined radio receiver for Realtek RTL2832U (tools) rtl-sdr is a software defined radio (SDR) receiver software for certain low-cost DVB-T/DAB(+) USB dongles based on the Realtek RTL2832U chip. . This package contains a set of command line utilities: * rtl_adsb: a simple ADS-B decoder for RTL2832 based DVB-T receivers * rtl_eeprom: an EEPROM programming tool for RTL2832 based DVB-T receivers * rtl_fm: a narrow band FM demodulator for RTL2832 based DVB-T receivers * rtl_sdr: an I/Q recorder for RTL2832 based DVB-T receivers * rtl_tcp: an I/Q spectrum server for RTL2832 based DVB-T receivers * rtl_test: a benchmark tool for RTL2832 based DVB-T receivers Package: rtl-sdr-dbgsym Source: rtl-sdr Version: 2.0.2.2.ae0d.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: A. Maitland Bottoms Installed-Size: 322 Depends: rtl-sdr (= 2.0.2.2.ae0d.202601231800) Filename: ./armhf/rtl-sdr-dbgsym_2.0.2.2.ae0d.202601231800_armhf.deb Size: 149588 MD5sum: a76433dd9325826622f5c72e7ee0c4eb SHA1: 3e2b8abaa14cc66dd097a79c63060046f2dfb2fc SHA256: 63d22c27df2ac3e0f0ee4cc1cdc495d0e22bbb42c6bda5bfc2dcd4a8ef6ce468 Section: debug Priority: optional Description: debug symbols for rtl-sdr Build-Ids: 345a5eab680f4d54fce735e2920822996da10faf 69ba5f326b50e079125638b8bbef7c2200e1d981 78e332915f14e51bf5d4c63e01d5adef216ccc81 810c02a1b3702fb21297b14a70a198ddbbd090b7 b02f42a3aaefa30c710f97e4b83fbcd763bbbf48 dd270d1b0c5cc95730e24caffcb9b7cd3f750fa6 e38f3024c565f4a98effc897bb263a105d2b6f28 e93099dccada378f49fad91f494b03e99a5da554 Package: sdcc Version: 4.2.0~osmocom3.113.9edd Architecture: armhf Maintainer: Osmocom team Installed-Size: 7735 Depends: sdcc-libraries (= 4.2.0~osmocom3.113.9edd), libc6 (>= 2.38), libgcc-s1 (>= 3.5), libstdc++6 (>= 13.1), zlib1g (>= 1:1.2.0) Suggests: python, sdcc-ucsim Breaks: sdcc-ucsim (<< 3.5.0) Replaces: sdcc-ucsim (<< 3.5.0) Filename: ./armhf/sdcc_4.2.0~osmocom3.113.9edd_armhf.deb Size: 1803868 MD5sum: ef603042dd4e635427c57d2f989cdfd0 SHA1: c323075655f55ca797135e397ca0968ed6065c61 SHA256: 6c045c57060653bea1a578a1708a5523a75042f198f21cfd7cc3c908ed33d604 Section: electronics Priority: optional Homepage: http://sdcc.sourceforge.net Description: Small Device C Compiler SDCC is a C compiler for the Intel MCS51 family, HC08, PIC, GameBoy Z80, DS80S390, Z80, Z180 and STM8 microcontrollers. . This package includes the compiler, assemblers and linkers. Package: sdcc-dbgsym Source: sdcc Version: 4.2.0~osmocom3.113.9edd Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 5374 Depends: sdcc (= 4.2.0~osmocom3.113.9edd) Filename: ./armhf/sdcc-dbgsym_4.2.0~osmocom3.113.9edd_armhf.deb Size: 3749100 MD5sum: 38614905014dc39dd27a1f2be74d21ee SHA1: d286ea98e796544f5adf13f6b8a8e0569bf3c15c SHA256: 8d4e1085546b4a0f8a6564b7f927fa4e6fd12628496a6de7c4414f87bfcd1dab Section: debug Priority: optional Description: debug symbols for sdcc Build-Ids: 66ba4262fbc4e93320d199a9c0aa8b39710e2794 9206e0bbb30a8e69d25d2d1cc3f23dcace4aaab0 c18d1f3d54fa56fda7c0b17981378a99ee329278 ebb4e705b294b6149689b75231adf9b8dc1ae37b Package: sdcc-libraries Source: sdcc Version: 4.2.0~osmocom3.113.9edd Architecture: all Maintainer: Osmocom team Installed-Size: 18779 Recommends: gputils Filename: ./all/sdcc-libraries_4.2.0~osmocom3.113.9edd_all.deb Size: 1583856 MD5sum: e40b506055dd82d65fd6fba4a5986821 SHA1: d854dc1a61a674d0455eddd7993acf7dcd813e6a SHA256: 4ff7da66a4eb564a91d0bc77d86c5f550843aa49ed790999989430cd8e2addae Section: electronics Priority: optional Multi-Arch: foreign Homepage: http://sdcc.sourceforge.net Description: Small Device C Compiler (libraries) SDCC is a C compiler for the Intel MCS51 family, HC08, PIC, GameBoy Z80, DS80S390, Z80, Z180 and STM8 microcontrollers. . This package contains the core library for SDCC. Package: sdcc-ucsim Source: sdcc Version: 4.2.0~osmocom3.113.9edd Architecture: armhf Maintainer: Osmocom team Installed-Size: 2942 Depends: libc6 (>= 2.38), libgcc-s1 (>= 3.5), libstdc++6 (>= 5) Suggests: sdcc Replaces: sdcc-ucsim-snapshot Filename: ./armhf/sdcc-ucsim_4.2.0~osmocom3.113.9edd_armhf.deb Size: 764896 MD5sum: a2e466e000fae6efebb37f9072210df9 SHA1: b292e042b62ba59a76894954b7352bba1a437120 SHA256: 30fe56ad29d04a5dee98cc825f48bcc5ac93c9a8bfbe2e4a501c560746cbc7a4 Section: electronics Priority: optional Homepage: http://sdcc.sourceforge.net Description: Micro-controller simulator for SDCC uCsim is a microcontroller simulator. It is extensible to support different microcontroller families. It currently supports Intel MCS51 family, HC08 and Z80 microcontrollers. Package: simtrace2-firmware Source: simtrace2 Version: 0.9.0.1.d0ad.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 552 Recommends: dfu-util Filename: ./all/simtrace2-firmware_0.9.0.1.d0ad.202601231800_all.deb Size: 46880 MD5sum: ee73e6b06c8ccd9440774cc136b7ef2d SHA1: ea23b4d9b4a47f2010a261558c01567a6514418f SHA256: 60a994bfba28a3e8d0d20ca2959895a1462e36d8fcecee317c4503934399c5fd Section: devel Priority: optional Homepage: http://osmocom.org/projects/simtrace2/wiki Description: Firmware for SAM3 based SIMtrace2 USB Devices. Open Source firmware for the Cortex-M3 microcontroller in the "Osmocom SIMtrace2" USB-attached peripheral device. Will only work in SAM3S-based SIMtrace2, not in its SAM7S-based predecessor SIMtrace! Package: simtrace2-utils Source: simtrace2 Version: 0.9.0.1.d0ad.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 277 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libosmo-simtrace2-1, libosmocore22, libosmosim2, libosmousb0, libusb-1.0-0 (>= 2:1.0.21) Recommends: simtrace2-firmware Filename: ./armhf/simtrace2-utils_0.9.0.1.d0ad.202601231800_armhf.deb Size: 19840 MD5sum: 1c2b285c3450080cb1ec7d69fa2a74a4 SHA1: 41d1674ac31543b833c1334d9f61e5d079cc6419 SHA256: 14a1687ac1fb90e9150584f3e9d03c1c5e185e48b2609cfa0a2a008adfa20058 Section: devel Priority: optional Multi-Arch: same Homepage: http://osmocom.org/projects/simtrace2/wiki Description: Host utilities to communicate with SIMtrace2 USB Devices. Package: simtrace2-utils-dbgsym Source: simtrace2 Version: 0.9.0.1.d0ad.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 113 Depends: simtrace2-utils (= 0.9.0.1.d0ad.202601231800) Filename: ./armhf/simtrace2-utils-dbgsym_0.9.0.1.d0ad.202601231800_armhf.deb Size: 51344 MD5sum: a7a569d68fbcee4873dca92aa147665a SHA1: 951e19f69e5ea2d6488657cd4f747caa82c807bc SHA256: 1a1309bfe4c57e78649d2ba1f70b06136a510eb92cb82e2aedb4f0388026aacf Section: debug Priority: optional Multi-Arch: same Description: debug symbols for simtrace2-utils Build-Ids: 0e9e92c3c8441af4c760e8e9a28e81b3bd83f684 2fbb8ed04236791c1997ede213795b5e6f5060ba 6d49f6a6c9cc7ae846fe3e8aea6044ea7473fe16 85c69942755de4053594f9450bc12cef4790cf70 Package: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: all Maintainer: Osmocom team Installed-Size: 142 Depends: osmocom-nightly (= 202601231800), strongswan-charon, strongswan-starter Filename: ./all/strongswan_0.1.2.osmo.epdg.202601231800_all.deb Size: 70140 MD5sum: 523180f5651012d12f6053fa4d24208c SHA1: ab1fd02fc027ea56725274decc2d290dd308198d SHA256: bbf0904328b000116a0795c3aa0be0d089e3959e32ebea903450ae44eddb36e2 Section: net Priority: optional Homepage: http://www.strongswan.org Description: IPsec VPN solution metapackage The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This metapackage installs the packages required to maintain IKEv1 and IKEv2 connections via ipsec.conf or ipsec.secrets. Package: strongswan-charon Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 257 Pre-Depends: debconf | debconf-2.0 Depends: osmocom-nightly (= 202601231800), iproute2 | iproute, libstrongswan (= 2:0.1.2.osmo.epdg.202601231800), strongswan-starter, libc6 (>= 2.34), strongswan-libcharon (>= 2:0.1.2.osmo.epdg.202601231800) Provides: ike-server Filename: ./armhf/strongswan-charon_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 81468 MD5sum: b9ed6bc5240a08022acd50b80b938076 SHA1: e28ac69ab4c8866694baa64e9541abe4cf088439 SHA256: afc3360a94ba86daa1c82ee287afe0f9d49dcb402a74c51cb99e86015a80bc3c Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan Internet Key Exchange daemon The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . charon is an IPsec IKEv2 daemon which can act as an initiator or a responder. It is written from scratch using a fully multi-threaded design and a modular architecture. Various plugins can provide additional functionality. Package: strongswan-charon-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 73 Depends: strongswan-charon (= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/strongswan-charon-dbgsym_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 51700 MD5sum: 2653c67fbcbaf6816c14a42d39d1d5ff SHA1: 18e34b4d7b229befc6c4ff99f949b714be49e612 SHA256: 79e5a5be4fe428c0e7785ac2a1d3c117019717d7e418e9e68f47292a615bac9c Section: debug Priority: optional Description: debug symbols for strongswan-charon Build-Ids: bcf468eed2ff23182bfcb73590eeb2b0138a27c0 Package: strongswan-libcharon Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 1106 Depends: osmocom-nightly (= 202601231800), libstrongswan (= 2:0.1.2.osmo.epdg.202601231800), libc6 (>= 2.34) Recommends: libcharon-extauth-plugins Suggests: libcharon-extra-plugins Breaks: strongswan-starter (<= 5.6.1-2) Replaces: strongswan-starter (<= 5.6.1-2) Filename: ./armhf/strongswan-libcharon_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 268656 MD5sum: 1d5b79ae700e9a99acc7b4eaac8aad4b SHA1: 475a100ca47031f37fa27f57825b0f9a6eda307d SHA256: aa2603185ce6fbb4cb0ab3ab767fe0febf8f065eae9255134a700797ad8f2f89 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan charon library The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the charon library, used by IKE client like strongswan-charon, strongswan-charon-cmd or strongswan-nm as well as standard plugins: - socket-default - counters - bypass-lan (disabled by default) . On Linux, it also contains the xfrmi binary which can be used on Linux 4.19+ to create XFRM interfaces (for more information, see https://wiki.strongswan.org/projects/strongswan/wiki/RouteBasedVPN) Package: strongswan-libcharon-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 1138 Depends: strongswan-libcharon (= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/strongswan-libcharon-dbgsym_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 1039152 MD5sum: 1e0113dc8265f1b91a8f1cd219d64f95 SHA1: 0cafe8890a1bb5c13dedb03fb03abf406f7e66ef SHA256: 3262f7fa5324d597dbee89b5719e88f1c282287bba4c7c486fe47a3ce15d720e Section: debug Priority: optional Description: debug symbols for strongswan-libcharon Build-Ids: 18ed9fc3cf69968349e6557ba2fc3dfb5f524648 41ecbaa21d9355c9fc22876b9fcef08a5dcd44c9 489adb68921e0e938c73a6a1b28e8f19688ff051 a6c88212208e49cd538c865aee9102ee6c6d7f07 c9822846f909f969667828e62394269d8c32158d e11b2e23bb50fb534a9684eefb1385e2b752afd8 Package: strongswan-nm Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 215 Depends: osmocom-nightly (= 202601231800), libc6 (>= 2.34), libglib2.0-0t64 (>= 2.80.0), libnm0 (>= 1.2.0), libstrongswan (>= 2:0.1.2.osmo.epdg.202601231800), strongswan-libcharon (>= 2:0.1.2.osmo.epdg.202601231800) Recommends: network-manager-strongswan Replaces: network-manager-strongswan (<= 1.4.1-1~) Filename: ./armhf/strongswan-nm_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 82076 MD5sum: 1d381d179ed374402aac4b826755cdd5 SHA1: 7be777ee328e5de0ca14f8d2122c869f72170b50 SHA256: 82fbbe5d1cde7a432e5884d7a7a53bd17167feee1ec6fe1a70651c7489d12bb3 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan plugin to interact with NetworkManager The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This plugin provides an interface which allows NetworkManager to configure and control the IKEv2 daemon directly through D-Bus. It is designed to work in conjunction with the network-manager-strongswan package, providing a simple graphical frontend to configure IPsec based VPNs. Package: strongswan-nm-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 161 Depends: strongswan-nm (= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/strongswan-nm-dbgsym_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 119716 MD5sum: 853f4c4e80a737b3d1df215063951a32 SHA1: 825194c464139e5228686359d7506a4bb3628a0c SHA256: 0965c446dd8a9f73ea3be1dbb6e4da38f94f89190232b36250a9b57f406f30fd Section: debug Priority: optional Description: debug symbols for strongswan-nm Build-Ids: f9dd85fd0aae243ef66ca4f589c236fb4160c0a4 Package: strongswan-pki Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 244 Depends: osmocom-nightly (= 202601231800), libstrongswan (= 2:0.1.2.osmo.epdg.202601231800), libc6 (>= 2.34) Filename: ./armhf/strongswan-pki_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 111460 MD5sum: a20929f0919771e3b8b0ce73bfc3af68 SHA1: 0222adf0b172277cc679d659347b63755fca149b SHA256: 820c154effa8a65f6baa0c670ea8731803650ad4a86cd6c48a5e82ab935610e6 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan IPsec client, pki command The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the pki tool which allows on to run a simple public key infrastructure. Package: strongswan-pki-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 165 Depends: strongswan-pki (= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/strongswan-pki-dbgsym_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 87512 MD5sum: 0ed823fd7b3f4288a3bf4be9f568852c SHA1: 04cbfa3958f3bcd8b3d5a7cc6e980af1179fdd9c SHA256: 2ecb926cb1d3a89be6143881f6147f2c1518b075c91948b7f031df4b073891eb Section: debug Priority: optional Description: debug symbols for strongswan-pki Build-Ids: f0e42d8c5ee6734406740208608541327c2aa4ae Package: strongswan-starter Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 632 Pre-Depends: init-system-helpers (>= 1.54~) Depends: osmocom-nightly (= 202601231800), adduser, libstrongswan (= 2:0.1.2.osmo.epdg.202601231800), sysvinit-utils (>= 3.05-3), debconf (>= 0.5) | debconf-2.0, libc6 (>= 2.38) Recommends: strongswan-charon Conflicts: openswan Filename: ./armhf/strongswan-starter_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 196908 MD5sum: 1de3e71637f292b189c87f7c5117b8a9 SHA1: 755a68ade38a8a541c928affaa4b5d43c095dd77 SHA256: f46959413ac49b685261d21197c0df63ff873acaa7a22f77a2258a6642d94b43 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan daemon starter and configuration file parser The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . The starter and the associated "ipsec" script control the charon daemon from the command line. It parses ipsec.conf and loads the configurations to the daemon. Package: strongswan-starter-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 399 Depends: strongswan-starter (= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/strongswan-starter-dbgsym_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 293976 MD5sum: 03a7ec79410072c740fc66e40fb1c47e SHA1: 4b107cf4f03dbb37ad847171a1d70f0af74714c7 SHA256: 2f3f352ff6f23da2fb9f6a792b103a8594395b19750ca9dbdb7580d9ca6e90cd Section: debug Priority: optional Description: debug symbols for strongswan-starter Build-Ids: 398dec56635d80d9906f1bc52468cd67ab983ede c0decea5092b2d97cd255f845f8a5447ffc5dd37 e92d13dc74b70ed0e30f4cd04c2374c63dc736b7 Package: strongswan-swanctl Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Architecture: armhf Maintainer: Osmocom team Installed-Size: 546 Depends: osmocom-nightly (= 202601231800), libstrongswan (= 2:0.1.2.osmo.epdg.202601231800), libc6 (>= 2.38) Breaks: strongswan-starter (<< 5.8.0-1) Replaces: strongswan-starter (<< 5.8.0-1) Filename: ./armhf/strongswan-swanctl_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 159764 MD5sum: 177e16177b156fc7bbeba4fee6521b14 SHA1: 1b3756fcf3cf1dd4e455bf77fea2a502033bc01c SHA256: 6b4754e0ccb8787319f13a67dbf39311babff9a2eddc71898b96ab73f3a49362 Section: net Priority: optional Homepage: http://www.strongswan.org Description: strongSwan IPsec client, swanctl command The strongSwan VPN suite uses the native IPsec stack in the standard Linux kernel. It supports both the IKEv1 and IKEv2 protocols. . This package contains the swanctl interface, used to configure a running charon daemon Package: strongswan-swanctl-dbgsym Source: strongswan Version: 2:0.1.2.osmo.epdg.202601231800 Auto-Built-Package: debug-symbols Architecture: armhf Maintainer: Osmocom team Installed-Size: 457 Depends: strongswan-swanctl (= 2:0.1.2.osmo.epdg.202601231800) Filename: ./armhf/strongswan-swanctl-dbgsym_0.1.2.osmo.epdg.202601231800_armhf.deb Size: 342204 MD5sum: 6c67b0d1a01aa1ce716d42b562351703 SHA1: 799748263f8d1bd5856f326579b104b687c38b72 SHA256: 252ba36223e108c65f418d5e26159d383dfa1df60b0167e287d9d343f642a0d8 Section: debug Priority: optional Description: debug symbols for strongswan-swanctl Build-Ids: 11bddbb7791187592f5fc324498df3e573c05f2c 6c86cbfa05e3254d1cb83f19c3770b0bac57d61c 9acd2275a2101ae20511491d521c79dca624d9ca