simtrace2 (0.9.0.1.d0ad.202511131800) unstable; urgency=medium

  * Automatically generated changelog entry for building the Osmocom nightly feed

 -- Osmocom OBS scripts <info@osmocom.org>  Thu, 13 Nov 2025 18:01:40 +0000

simtrace2 (0.9.0) unstable; urgency=medium

  [ Oliver Smith ]
  * host/contrib/simtrace2.spec.in: update
  * treewide: remove FSF address
  * contrib/jenkins.sh: set USE_CLANG=1
  * Cosmetic: fix CI errors
  * debian/rules: remove override_dh_autoreconf
  * debian: set compat level to 10
  * contrib/jenkins: tweak shell logic
  * firmware/Makefile: don't use distribution's CFLAGS
  * contrib: remove rpm spec file

  [ Eric Wild ]
  * firmware: add crc stub to all dfu apps to ensure reliable loading
  * wireshark lua dissector: dissect more
  * lua dissector: adjust usage instructions
  * conrtrib/upload : upload elf files
  * contrib/jenkins.sh : build and publish combined targets
  * fw: only build the bl with clang

  [ James Tavares ]
  * simtrace2-tool: add "modem sim-card (insert|remove)" command
  * firmware: add definition for main osc bypass when using external osc
  * gitignore: add missing entries binaries
  * firmware: bugfix: disable cardemu comms in local SIM mode
  * main: rotor: erase immediately after send
  * Fix missing generation of waiting-time-extension in some situations

  [ Harald Welte ]
  * host: Print strerror(errno) in case of problems opening the USB device
  * cosmetic: Fix indent of printf() statement
  * host: properly zero-initialize interface match structures
  * contrib/simtrace.lua: Add VID/PID of all currentl simtrace2 devices
  * cosmetic: contrib/simtrace.lua: more consistent formatting
  * contrib/simtrace.lua: Add header with author/description/usage
  * contrib/simtrace.lua: print length + slot-number in decimal only
  * contrib/simtrace.lua: Don't print SIMTRACE_MSGT_ in every COL_INFO
  * contrib/simtrace.lua: Dissect some more cardem related message types
  * contrib/simtrace.lua: Register for "decode as..."
  * cardem: Report the VCC voltage (if supported)
  * card_emu_uart_interrupt: ASSERT if we get called with wrong uart_chan
  * cardem: set more reasonable interrupt priorities
  * host: Always initialize libosmocore logging before using it
  * simtrace2-cardem-pcsc: rename 'flags' to 'status_flags'
  * simtrace2-cardem-pcsc: Move all logging into libosmocore
  * simtrace2-cardem-pcsc: Detect card power-up without RESET
  * host: Don't pass -1 (converted to 255) as address
  * simtrace2-cardem-pcsc: Fix copy+paste error in log message
  * simtrace2-cardem-pcsc: continue in case of LIBUSB_TRANSFER_ERROR
  * contrib/simtrace.lua: Add Flag bits + Data to COL_INFO
  * Reduce bInterval of interrupt endpoints to avoid interrupt misses
  * simtrace2-cardem-pcsc.c: Send APDUs via GSMTAP
  * update git URLs (git -> https; gitea)
  * cardem: reset the uC in case of USB disconnect
  * cosmetic: Fix compile-time #error message string typo
  * firmware/sniffer: Fix copy+paste when logging invalid INS bytes
  * firmware/sniffer: Log parity errors, just like overruns and framing errors
  * firmware/sniffer: refactor setting TPDU state
  * firmware/sniffer: Log old and new state in ISO7816-3 state changes
  * firmware/sniffer: Avoid extra call for rbuf_is_full
  * firmware/sniffer: Fix programming error in PPS
  * firmware/sniffer: Make all global variables 'static'
  * firmware/sniffer: Group global variables in structs
  * firmware/sniffer: Log cause of WT change
  * firmware/sniffer: Rename global variable 'wt' to 'g_wt'
  * firmware/sniffer: Disable TIMEOUT interrupts in USART IER on exit
  * firmware/sniffer: Add + use 16bit ringbuffer
  * firmware/sniffer: Pass PARITY/OVERRUN/FRAMING error via ringbuffer
  * firmware/sniffer: Handle WT timeouts via ring-buffer
  * firmware/sniffer: introduce #define for interrupt enable flags
  * firmware/sniffer: Enable interrupts for overrun/parity/frame errors
  * Fix unchecked return value of osmo_libusb_init()
  * Add funding link to github mirror
  * README.md: Fix mark-down nested bullet syntax
  * README.md: Fix mark-down nested bullet syntax
  * README.md: add links to SIMtrace2 and QMOD
  * README.md: Add links to where hardware can be bought
  * README.md: Add section on ngff_carem
  * README.md: Add note to avoid using a VM

  [ Alexander Couzens ]
  * firmware: usb: call USBD_HAL_DISCONNECT while usb init to recover from resets
  * ngff_cardem: cosmetic: fix superflous space
  * dissector: add support for sim polarity
  * firmware: allow to change the sim presence pin polarity
  * simtrace2-cardem-pcsc: allow to set sim presence polarity

  [ Vadim Yanitskiy ]
  * host/cardem: fix integer overflow in process_do_rx_da()

  [ Philipp Maier ]
  * simtrace2-cardem-pcsc: mark reset events in GSMTAP trace

 -- Oliver Smith <osmith@sysmocom.de>  Wed, 12 Feb 2025 16:07:53 +0100

simtrace2 (0.8.1) unstable; urgency=medium

  * host/contrib/simtrace2.spec.in: fix soname

 -- Oliver Smith <osmith@sysmocom.de>  Fri, 10 Dec 2021 10:04:28 +0100

simtrace2 (0.8.0) unstable; urgency=medium

  [ Harald Welte ]
  * adapt to host tools in autotools
  * simtrace2_api: Remove dead code
  * fix baudrate of 'make log'
  * qmod DFU: Don't overwrite memory beyond end of usb_strings[]
  * usb_strings.txt: s/SIMtrace Phone/SIMtrace Card Emulation/
  * Patch actual board name into the USB iProduct string descriptor
  * Build only 'reasonable' combinations of APP/MEMORY
  * stdio: Add support for %p format string (pointer address)
  * Fix format string related warnings (int vs. long)
  * Add missing CR to achieve CRLF at end of log lines
  * more comments in host_communication.c.
  * usb_buf: count number of elements in queue
  * usb_buf: Limit the maximum queue length to 3 elements
  * qmod: Don't print EEPROM operations in help when not supported
  * cosmetic: board_qmod: Annotate #endif with comments
  * qmod: Document '!' and '@' commands on UART
  * implement minimalistic talloc_report(); add 't' command on UART
  * update copyright statement
  * cardem: Fix memory leak on unsupported SIMTRACE_MSGT_DT_CEMU_CARDINSERT
  * usb_buf: Actually limit queue to 3 elements, not 4
  * USBD_HAL: Don't disable UDP peripheral clock on suspend
  * usb_buf: Properly initialize buffered_endpoint->ep number
  * pseudo_talloc: Increment number of buffers from 10 to 20
  * card_emu: Factor out card_handle_reset() from card_emu_init()
  * cardem: Move card_emu_io_statechg() calls out of interrupt context
  * cardem: RST resets all state (including release of buffers)
  * host_communication: Send zero-length-packet on wMaxPacketSize
  * card_emu: Initialize PTSS state every time we start PTS
  * card_emu: Avoid recursive calls to card_set_state()
  * card_emu: Always print state names in string representation
  * card_emu: Remove extraneous code
  * card_emu: Remove extraneous initialization of ch->pts.state
  * cardem: Make card_emu_report_status() optionally use IRQ endpoint
  * cardem: Add SIMTRACE_MSGT_BD_CEMU_CONFIG
  * cardem: Implement support for CEMU_FEAT_F_STATUS_IRQ
  * simtrace2-sniff: Reformat value_string to pass our validation scripts
  * firmware: Reformat value_string to pass our validation scripts
  * jenkins.sh: Add verify_value_string_arrays_are_terminated.py
  * [lib] apdu_dispatch: Use DLGLOBAL and don't printf() directly
  * [lib] apdu_dispatch: Don't print APDU state to stdout
  * OSMO_ASSERT() on double-free or invalid pointer
  * Update .gitignore file for host
  * migrate to libosmousb
  * library: Add osmo_st2_compatible_dev_idsp[]
  * firmware: move printing of welcome banner to common function print_banner()
  * firmware: apps/cardem/main.c: Synchronize with apps/trace/main.c
  * host: Add COPYING file for host software (GPLv2)
  * host/lib/gsmtap.c: Add GPLv2 disclaimer
  * increase ringbuffer size from 512 to 1024 bytes
  * simtrace2_api: Add osmo_st2_cardem_request_config()
  * Disable interrupts during EEFC_ReadUniqueID()
  * cardem: Fix infinite loop + watchdog reset on long OUT message
  * extend osmo_st2_cardem_inst with fields required by osmo-remsim
  * cosmetic: Add missing CR to LF in dispatch_received_usb_msg()
  * USBD.c: Don't reset EP0 on SetConfiguration(0)
  * pio_it.c: Permit repeated calls to PIO_ConfigureIt()
  * simtrace2_siff: getopt_long() returns int, not char
  * Introduce support for asynchronous USB transmission
  * firmware: fix builds with gcc stack smashing protection enabled
  * dfu: Shrink code by 144 bytes (by not calling PIO_InitializeInterrupts)
  * dfu: Save another 60 bytes by changing the way we print horizontal lines
  * migrate from BSC_FD_* to OSMO_FD_*
  * remove usb2udp
  * rename simtrace2-remsim to simtrace2-cardem-pcsc
  * Update README
  * remove old pre-autoconf makefile
  * simtrace2-cardem-pcsc: Make it work again
  * Revert "add ISO 7816-3 library to remsim project"
  * Revert "add library providing ISO 7816-3 utilities"
  * card_emu: waiting_time is stored in etu, not clocks.
  * card_emu: Rename fi to Fi and di to Di
  * card_emu: Clarify and differentiate F/Fi/F_index/Fi_index
  * iso7816_fidi: Add iso7816_3_ prefix to symbols; fix terminology
  * card_emu: improve reset detection conditions
  * card_emu: explicitly initialize PTS and TPDU states
  * card_emu: Use USART timeout for waiting time
  * card_emu: Fix USART timer, particularly in re-start situations
  * card_emu: Fix computation of waiting time
  * contrib/jenkins.sh: Switch from rita -> ftp.osmocom.org
  * st2-cardem-pcsc: Fix goto-in-while mess
  * st2-cardem-pcsc: Use ATR of real card by default
  * simtrace board.h: Enable HAVE_CARDEM if we build the cardem firmware
  * jenkins.sh: build 'cardem' firmware also for simtrace board
  * Revert "cardem: disable upload for simtrace2"
  * simtrace2-cardem-pcsc: Decode STATUS flags to strings
  * simtrace2-cardem-pcsc: Reset the real card if reader resets cardem
  * assert: Use printf_sync() to ensure printing of assert / panic
  * Add usb product ID of sysmoOCTSIMTEST
  * octsimtest: remove lots of unused #defines
  * octsimtest: most code for support of this new board
  * octsimtest: Switch direction of I/O level shifter depending on uart tx / rx
  * cardem-pcsc: initialize libosmocore logging
  * octsimtest: Adjust VCC voltage thresholds (resistive VCC divider)
  * contrib/jenkins.sh: Build 'cardem' app for 'octsimtest' board
  * firmware: octsimtest: Fix IO_DIR pin definition
  * firmware: octsimtest: Make slot mux configurable via USB
  * firmware: octsimtest: mcp23017 initializaiton
  * firmware: cardem: re-factor CARDINSERT command processing
  * firmware: octsimtest: Support SIMTRACE_MSGT_DT_CEMU_CARDINSERT
  * firmware: octsimtest: use TRACE_* macros instead of direct printf
  * firmware: octsimtest: Fix disabling the card_insert signal
  * firmware: octsimtest: Add i/I command for setting card-insert via I2C GPIO
  * firmware: octsimtest: ensure all card_insert GPIO are 0 after reset
  * don't printf() directly from library code, go via libosmocore logging
  * simtrace2-list: Use osmo_st2_compatible_dev_ids[]
  * board_gpio.gnumeric: Add ngff-cardem pin-out
  * 99-simtrace2.rules: Add OCTSIMTEST
  * contrib/flash.py: Add OCTSIMTEST support
  * Introduce simtrace2-tool
  * introduce support for new ngff_cardem board
  * simtrace2.spec: Add simtrace2-tool binary to package
  * contrib/jenkins.sh: Build APP=cardem for BOARD=ngff_cardem
  * jenkins.sh: Build 'trace' firmware for ngff_cardem
  * Use osmo_libusb_{init,exit}() instead of libusb_{init,exit}()
  * simtrace2-cardem-pcsc: Remove double libusb initialization
  * simtrace2-tool: Initialize logging to avoid error on first log output
  * cardem-pcsc: Fix return of uninitialized variable
  * host: Upgrade libosmocore dependency to 1.4.0

  [ Kévin Redon ]
  * minor: fix spacing
  * minor: updated copyright years
  * dfu: minor: make debug output only verbose in info level
  * minor: move USB debug output from info to debug level
  * minor: improve debug output
  * minor : fix typo in comment
  * better detect VCC and nRST changes on simtrace2 board
  * minor: ignore usbstring binary
  * simtrace2-remsim: Use simplest ATR
  * cardem: use simplest ATR as default ATR
  * minor: fix typo
  * DFU: increase USB reset duration to 50 ms
  * DFU: restart bootloader when USB conf failed
  * Makefile: add linker option showing memory usage
  * improve shared bootloader/application memory
  * minor: improve trace output
  * DFU: add DFU application
  * add script to flash latest firmware
  * minor: use same LED pattern for cardem as other applications
  * cardem: currently simtrace does not support cardem
  * add library providing ISO 7816-3 utilities
  * add ISO 7816-3 library to remsim project
  * rename PIN_PHONE_{CLK,IO} to PIN_USIM1_{CLK,IO}
  * minor add comments
  * make sim switch board specific

  [ Eric Wild ]
  * remsim: allow selecting pcsc reader number
  * cardem: disable upload for simtrace2
  * firmware: do not allow undefined symbols
  * firmware: allow verbose builds
  * cardem: choose a more reasonable default ATR
  * contrib: add a basic simtrace lua dissector for wireshark
  * cardem: free the buf
  * cardemu: support 1v8 for the tester
  * firmware: data sections
  * firmware: proper makefile deps
  * firmware: make the ngff beakout blink
  * simtrace2-cardem: use local sim on exit
  * contrib: more cardem dissection
  * firmware: trace for ngff
  * cardem: fix spurious NULL bytes during transfers
  * contrib/jenkins.sh: build ngff_Cardem dfu bootloader
  * contrib: allow manually forcing bulk simtrace dissection
  * contrib/jenkins.sh: lower trace to make bl fit
  * Revert "firmware: data sections"
  * add the ngff cardem to default build targets
  * drop unused exidx sections when linking
  * clang build support
  * fix bootloader led config crash
  * firmware: add bootloader update "app"
  * firmware: remove usb pullup that dates back to simtrace1
  * firmware: increase reset delay before usb reattach
  * firmware: drop cref printing
  * add our default clang-format file
  * firmware: add missing usb strings to blupdate that prevented building it
  * jenkins: build bootloader updater
  * firmware: remove dfu-dfu default target

  [ Oliver Smith ]
  * contrib: import RPM spec
  * contrib: integrate RPM spec
  * d/source/format: new file
  * firmware/Makefile: fix UNKNOWN in OBS packages
  * host: use git-version-gen/tarball-v. from topdir
  * gitignore: add firmware/apps/*/usb_strings.txt.patched
  * firmware: create duplicate files for upload only
  * contrib/prepare_upload.sh: fix cd problems
  * firmware: qmod-dfu: disable stack protector
  * firmware: disable stack protector by default
  * gitreview: new file

  [ Leonard Hübner ]
  * remsim: adding cli argument to set the atr

  [ Eric ]
  * dfu: let the device reset itself

 -- Harald Welte <laforge@osmocom.org>  Thu, 09 Dec 2021 08:12:56 +0100

simtrace2 (0.5.1) unstable; urgency=medium

  * Backwards-compatibility with older (released, non-master) libosmocore

 -- Harald Welte <lafore@gnumonks.org>  Sun, 26 Aug 2018 11:50:36 +0200

simtrace2 (0.5) unstable; urgency=medium

  * Initial debian package release.

 -- Harald Welte <lafore@gnumonks.org>  Sun, 26 Aug 2018 10:37:19 +0200
